Search NASA⌕ Search

SEARCH · Search NASA

Results for “spin current”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

A halo-independent lower bound on the dark matter capture rate in the Sun from a direct detection signal

We show that a positive signal in a dark matter (DM) direct detection experiment can be used to place a lower bound on the DM capture rate in the Sun, independent of the DM halo. For a given particle physics model and DM mass we obtain a lower bound on the capture rate independent of the local DM density, velocity distribution, galactic escape velocity, as well as the scattering cross section. We illustrate this lower bound on the capture rate by assuming that upcoming direct detection experiments will soon obtain a significant signal. When comparing the lower bound on the capture rate with limits on the high-energy neutrino flux from the Sun from neutrino telescopes, we can place upper limits on the branching fraction of DM annihilation channels leading to neutrinos. With current data from IceCube and Super-Kamiokande non-trivial limits can be obtained for spin-dependent interactions and direct annihilations into neutrinos. In some cases also annihilations into ττ or bb start getting constrained. For spin-independent interactions current constraints are weak, but they may become interesting for data from future neutrino telescopes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Time-Dependent Current-Density-Functional Theory of Spin-Charge Separation and Spin Drag in One-Dimensional Ultracold Fermi Gases

Motivated by the large interest in the nonequilibrium dynamics of low-dimensional quantum many-body systems, we present a fully microscopic theoretical and numerical study of the charge and spin dynamics in a one-dimensional ultracold Fermi gas following a quench. Our approach, which is based on time-dependent current-density-functional theory, is applicable well beyond the linear-response regime and produces both spin-charge separation and spin-drag-induced broadening of the spin packets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Critical current and linewidth reduction in spin-torque nano-oscillators by delayed self-injection

Based on theoretical models, the dynamics of spin-torque nano-oscillators can be substantially modified by re-injecting the emitted signal to the input of the oscillator after some delay. Numerical simulations for vortex magnetic tunnel junctions show that with reasonable parameters this approach can decrease critical currents as much as 25% and linewidths by a factor of 4. Analytical calculations, which agree well with simulations, demonstrate that these results can be generalized to any kind of spin-torque oscillator.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Engineering the Spectrum of Dipole Field-Localized Spin-Wave Modes to Enable Spin-Torque Antidamping

Auto-oscillation of a ferromagnet due to spin-orbit torques in response to a dc current is of wide interest as a flexible mechanism for generating controllable high-frequency magnetic dynamics. However, degeneracies of the spin-wave modes and nonlinear magnon-magnon scattering impede coherent precession. Discretization of the spin-wave modes can reduce this scattering. Furthermore, spatial localization of the spin-wave modes by the strongly inhomogeneous dipole magnetic field of a nearby spherical micromagnet provides variable spatial confinement, thus offering the option of systematic tunability of magnon spectrum for studying multimode interactions. Here we demonstrate that field localization generates a discrete spin-wave spectrum observable as a series of well-resolved localized modes in the presence of imposed spin currents arising from the spin Hall effect in a permalloy-platinum (Py/Pt) microstrip. The observation of linewidth reduction through damping control in this micromagnetically engineered spectrum demonstrates that localized modes can be controlled efficiently, an important step toward continuously tunable spin Hall effect–driven auto-oscillators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin Injection and Accumulation in the Planar NiFe–InSb–NiFe and NiFe–Cu–NiFe Spin Valves

Spin injection and accumulation have been studied for NiFe–InSb–NiFe and NiFe–Cu–NiFe planar spin valves with direct injection current I in nonlocal (NLSV) and local (LSV) measurement configurations at temperature 8–300 K. The value of the generated voltage U and the character of the dependence U(I) drastically changed for currents I greater some critical value I{sub c} due to thermoelectric effects. For NLSV configuration and currents I<I{sub c} the value of U is of 2–3 order of magnitude higher for NiFe–InSb–NiFe (U ≈ 1–3 mV at 300 K) structures in comparison with NiFe–Cu–NiFe (U ≈ 4–20 µV at 8 K). For LSV geometry electrical detection of spin current was observed only for NiFe–Cu–NiFe structure, where for I<I{sub c} the magnetoresistance (MR) effect of the order 0.5% was detected. For currents I of 1.5–2% higher than I{sub c} the MR of the order of 10–30% was observed for both NLSV and LSV configurations for studied structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Time-domain detection of current controlled magnetization damping in Pt/Ni{sub 81}Fe{sub 19} bilayer and determination of Pt spin Hall angle

The effect of spin torque from the spin Hall effect in Pt/Ni{sub 81}Fe{sub 19} rectangular bilayer film was investigated using time-resolved magneto-optical Kerr microscopy. Current flow through the stack resulted in a linear variation of effective damping up to ±7%, attributed to spin current injection from the Pt into the Ni{sub 81}Fe{sub 19}. The spin Hall angle of Pt was estimated as 0.11 ± 0.03. The modulation of the damping depended on the angle between the current and the bias magnetic field. These results demonstrate the importance of optical detection of precessional magnetization dynamics for studying spin transfer torque due to spin Hall effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin-orbit torques in perpendicularly magnetized Ir22Mn78/Co20Fe60B20/MgO multilayer

The current-induced spin-orbit torques (SOTs) in the perpendicularly magnetized Ir 22 Mn 78 / Co 20 Fe 60 B 20 /MgO structures are investigated. The damping- and field-like torques are characterized using a harmonic technique. The spin Hall angle of Ir 22 Mn 78 is determined to be $θ$ SHE $=+0.057 ± 60.002$. The SOT-driven magnetization switching is also demonstrated with the assistance of an external in-plane field. Furthermore, the magneto-optical Kerr effect imaging experiments show that the magnetization switching is realized through domain nucleation and domain wall motion. These results may promise potential practical applications in high-performance SOT devices based on the antiferromagnetic materials.

42 ENGINEERING↗

Proton spin tracking with symplectic integration of orbit motion

Symplectic integration had been adopted for orbital motion tracking in code SimTrack. SimTrack has been extensively used for dynamic aperture calculation with beam-beam interaction for the Relativistic Heavy Ion Collider (RHIC). Recently proton spin tracking has been implemented on top of symplectic orbital motion in this code. In this article, we will explain the implementation of spin motion based on Thomas-BMT equation, and the benchmarking with other spin tracking codes currently used for RHIC. Examples to calculate spin closed orbit and spin tunes are presented too.

43 PARTICLE ACCELERATORS↗

Electron-Spin Filters Would Offer Spin Polarization Greater than 1

A proposal has been made to develop devices that would generate spin-polarized electron currents characterized by polarization ratios having magnitudes in excess of 1. Heretofore, such devices (denoted, variously, as spin injectors, spin polarizers, and spin filters) have typically offered polarization ratios having magnitudes in the approximate range of 0.01 to 0.1. The proposed devices could be useful as efficient sources of spin-polarized electron currents for research on spintronics and development of practical spintronic devices.

Ting, David Z.↗

Enhancement of output power in spin torque nano-oscillator using heterogeneous layer

The article mainly focuses on the enrichment of the output power obtained from Spin torque nano-oscillator by introducing the heterogeneous structure in multilayer nanopillar device. Here we devised two homogeneous and two heterogeneous devices having NiFe and Co materials. The dynamics of the devices are governed by a famous Landu- Lifshitz -Gilbert-Solencskwei (LLGS) equation which can be solved numerically using embedded RK-4 procedure. The current density and the external magnetic field for four devices are taken as 5×l0{sup 11}A/m{sup 2} and 6×l0{sup −3} A/m respectively. The applied dc current is converted into spin polarized dc current while it passes through pinned layer. The generated spin polarized dc currents produces spin transfer torque with the free layer magnetization via spacer. Thus the magnetization of the free layer gets a sustained oscillation. The results obtained from the heterogeneous STNOs are really fascinating. The frequency of the NiFe/ Cu/NiFe and Co/Cu/NiFe devices have the same frequency but there is a tremendous change in the output power which is exactly twice that the NiFe/Cu/NiFe device. The similar behaviour is also obtained from Co/Cu/Co and NiFe/Cu/Co devices. The line width and the Q-factor of the output microwave signal are also computed. Among the four devices, the NiFe/Cu/Co heterogeneous device has low linewidth (408 MHz) and high Q-factor (4.77).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Origins of large light induced voltage in magnetic tunnel junctions grown on semiconductor substrates

Recently, the study of interactions between electron spins and heat currents has given rise to the field of “Spin Caloritronics”. Experimental studies of these interactions have shown a possibility to combine the use of heat and light to power magnetic tunnel junction (MTJ) devices. Here we present a careful study of an MTJ device on Si substrate that can be powered entirely by light. We analyze the influence of the material properties, device geometry, and laser characteristics on the electric response of the sample. We demonstrate that by engineering the MTJ and its electrical contact, a large photovoltage reaching 100 mV can be generated. This voltage originates from the Si substrate and depends on the MTJ magnetic configuration. Finally, we discuss the origin of the photo-voltage in terms of Seebeck and photovoltaic effects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spin-Dependent Electrochemistry

Recent experiments that use spin polarized electron currents to improve the selectivity and enantioselectivity of electrochemical reactions are described. Electrochemical studies with both chiral working electrodes and with magnetic working electrodes are used to generate spin polarized electron currents. Studies with chiral electrodes, which are formed through the adsorption of chiral molecules and through the growth of chiral oxide films, are shown to improve the efficiency and selectivity of the oxygen evolution reaction and oxygen reduction reaction. These improvements are attributed to the exploitation of spin selection rules (triplet vs. singlet pathways) in the reaction mechanism. Studies with magnetic electrodes, which are formed through ferromagnetic/Au thin film electrodes, are reported to initiate enantioselective chemical transformations, and three different cases are discussed here (enantioresolution of a racemic mixture, enantioselective polymer grafting on electrode surfaces, and the generation of achiral carbon centers). The addition of spin control to the conventional control over charge currents provides an added dimension to electrochemistry and electrosynthesis.

Waldeck, David H↗

Spin orbit torque based electronic neuron

A device based on current-induced spin-orbit torque (SOT) that functions as an electronic neuron is proposed in this work. The SOT device implements an artificial neuron's thresholding (transfer) function. In the first step of a two-step switching scheme, a charge current places the magnetization of a nano-magnet along the hard-axis, i.e., an unstable point for the magnet. In the second step, the SOT device (neuron) receives a current (from the synapses) which moves the magnetization from the unstable point to one of the two stable states. The polarity of the synaptic current encodes the excitatory and inhibitory nature of the neuron input and determines the final orientation of the magnetization. A resistive crossbar array, functioning as synapses, generates a bipolar current that is a weighted sum of the inputs. The simulation of a two layer feed-forward artificial neural network based on the SOT electronic neuron shows that it consumes ∼3× lower power than a 45 nm digital CMOS implementation, while reaching ∼80% accuracy in the classification of 100 images of handwritten digits from the MNIST dataset.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin-orbit torque from a ferromagnetic metal

The switching of magnetization by current-induced spin-orbit torque (SOT) has potential applications for energy-efficient spintronic devices. In the past, most conventional works have been focused on SOT in heavy metals. Here the SOT from a ferromagnetic metal is investigated, and two mechanisms of the field-free SOT induced magnetization switching are demonstrated to be from the interlayer exchange coupling and the tilted perpendicular magnetic anisotropy. We exclude the spin torque contribution from the anomalous Hall effect and the interfacial Rashba effect combined with spin precession. A spin Hall angle θ SH = –0.022 of CoFeB is obtained by the current-induced hysteresis loop shift method, and the obtained θ SH is comparable with heavy metals. This work demonstrates that a considerable SOT can come from a ferromagnetic metal, and indicates the unconventional origin of spin-orbit coupling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ion beam etching dependence of spin-orbit torque memory devices with switching current densities reduced by Hf interlayers

We report on the fabrication of nanoscale, three-terminal in-plane spin–orbit torque switching devices with low switching current densities. Critical parameters in the fabrication process, including the ion beam etching angle and time, were optimized to avoid fabrication defects and improve device yield. Measurements of the magnetic field and current-induced switching behavior of the tunnel junctions demonstrate a sensitivity to the nanopillar aspect ratio, which dictates the nanopillars’ anisotropy and thermal stability. Additionally, we show that the current density required for switching can be reduced and the device thermal stability increased by inserting Hf interlayers into the heterostructure. Micromagnetic simulations are generally consistent with the experimentally observed switching behavior, suggesting an increase in the interfacial perpendicular anisotropy at the CoFeB/MgO interface and the reduction in the Dzyaloshinskii–Moriya interaction at the W/CoFeB interface by the Hf interlayers.

36 MATERIALS SCIENCE↗

SIGNS OF MAGNETIC ACCRETION IN THE X-RAY PULSAR BINARY GX 301-2

Observations of the cyclotron resonance scattering feature in the X-ray spectrum of GX 301-2 suggest that the surface field of the neutron star is B{sub CRSF} {approx} 4 Multiplication-Sign 10{sup 12} G. The same value has been derived in modeling the rapid spin-up episodes in terms of the Keplerian disk accretion scenario. However, the spin-down rate observed during the spin-down trends significantly exceeds the value expected in currently used spin-evolution scenarios. This indicates that either the surface field of the star exceeds 50 B{sub CRSF} or a currently used accretion scenario is incomplete. We show that the above discrepancy can be avoided if the accreting material is magnetized. The magnetic pressure in the accretion flow increases more rapidly than its ram pressure and, under certain conditions, significantly affects the accretion picture. The spin-down torque applied to the neutron star in this case is larger than that evaluated within a non-magnetized accretion scenario. We find that the observed spin evolution of the pulsar can be explained in terms of the magnetically controlled accretion flow scenario provided the surface field of the neutron star is {approx}B{sub CRSF}.

79 ASTRONOMY AND ASTROPHYSICS↗

Current control of magnetic anisotropy via stress in a ferromagnetic metal waveguide

In this work, we demonstrate that in-plane charge current can effectively control the spin precession resonance in an Al 2 O 3 /CoFeB/Ta heterostructure. Brillouin light scattering was used to detect the ferromagnetic resonance field under microwave excitation of spin waves at fixed frequencies. The current control of spin precession resonance originates from modification of the in-plane uniaxial magnetic anisotropy field $H_k$, which changes symmetrically with respect to the current direction. Numerical simulation suggests that the anisotropic stress introduced by joule heating plays an important role in controlling $H_k$. These results provide new insight into current manipulation of magnetic properties and have broad implications for spintronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large magnetoresistance in current-perpendicular-to-plane pseudo spin-valves using Co{sub 2}Fe(Ga{sub 0.5}Ge{sub 0.5}) Heusler alloy and AgZn spacer

Fully epitaxial pseudo spin-valves (PSVs) using 10-nm-thick Co{sub 2}Fe(Ga{sub 0.5}Ge{sub 0.5}) (CFGG) ferromagnetic layers and a 5-nm-thick AgZn space layer annealed at 630 °C show a large current-perpendicular-to-plane giant magnetoresistance (CPP-GMR) output with resistance-change area product, ΔRA, of 21.5 mΩ μm{sup 2} and MR ratio of 59.6% at room temperature. These values are substantially enhanced to ΔRA of 59.8 mΩ μm{sup 2} and MR ratio of 200.0% at 10 K. The large MR is attributed to the high spin polarization of the CFGG electrodes with the enhanced L2{sub 1} ordering induced by the atomic diffusion of Zn through the CFGG layers. The CPP-PSV shows relatively large ΔRA of 10.9 mΩ μm{sup 2} with the MR ratio of 25.6% for the low annealing temperature of 350 °C, which is a practically useful feature for read sensor applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗