Search NASA⌕ Search

SEARCH · Search NASA

Results for “squids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Induced ferromagnetism in Mn{sub 3}N{sub 2} phase embedded in Mn/Si{sub 3}N{sub 4} multilayers

Room temperature ferromagnetism has been obtained for different sets of Mn/Si{sub 3}N{sub 4} multilayers prepared by sputtering. In order to find the most suitable conditions to stabilize the ferromagnetic ordering in this system, the evolution of the magnetic properties has been studied for films in which the Si{sub 3}N{sub 4} layer thickness was maintained constant while that of the Mn layer was varied, [Mn(t{sub m})/Si{sub 3}N{sub 4}(3.4 nm)]{sub n}, and conversely, in [Mn(0.7 nm)/Si{sub 3}N{sub 4}(t{sub sn})]{sub 43} samples, in which the Mn layer thickness was kept constant while varying the Si{sub 3}N{sub 4} layer thickness. Structural, compositional, electronic and magnetic characterizations have been performed by means of x-ray reflectometry, Rutherford backscattering spectrometry, x-ray photoemission spectroscopy, x-ray absorption, and superconducting quantum interference device for further knowledge of the magnetic-structural relationship in this system. Our results show that the peculiar magnetic behavior of these films is mainly related to the stabilization of a slightly distorted Mn{sub 3}N{sub 2} phase that is induced by the Si{sub 3}N{sub 4} at the interfaces. For samples with larger Mn layer thickness, metallic Mn and Mn{sub 3}N{sub 2} phases coexist, which leads to a reduction of the total magnetization per Mn atom due to the presence of metallic Mn. For small Mn layer thickness (t{sub m}<0.86 nm), where noncontinuous Mn{sub 3}N{sub 2} layers are formed, the magnetization decreases noticeably due to the superparamagnetic size limit. It has been found that the best conditions for the stabilization of the ferromagnetism in this system occur when both, the manganese-rich and the silicon nitride layers, are continuous and with similar thickness, close to 3.5 nm.

36 MATERIALS SCIENCE↗

Reversible ferromagnetic spin ordering governed by hydrogen in Co-doped ZnO semiconductor

We report a reversible manipulation of short-range spin ordering in Co-doped ZnO through hydrogenation and dehydrogenation processes. In both magnetic-circular dichroism and superconducting quantum interference device measurements, the ferromagnetism was clearly induced and removed by the injection and ejection of hydrogen, respectively. The x-ray photoelectron spectroscopy results and the first-principles electronic structure calculations consistently support the dependence of the ferromagnetism on the hydrogen position and the contribution of transition metal ions. The results suggest the ferromagnetic interaction between Co ions can be reversibly controlled by the hydrogen-mediated intrinsic spin ordering in Co doped ZnO.

36 MATERIALS SCIENCE↗

Microfabrication of High Resolution X-ray Magnetic Calorimeters

Metallic magnetic calorimeter (MMC) is one of the most promising x-ray detector technologies for providing the very high energy resolution needed for future astronomical x-ray imaging spectroscopy. For this purpose, we have developed micro-fabricated 5x5 arrays of MMC of which each individual pixel has excellent energy resolution as good as 3.4 eV at 6 keV x-ray. Here we report on the fabrication techniques developed to achieve good resolution and high efficiency. These include: processing of a thin insulation layer for strong magnetic coupling between the AuEr sensor film and the niobium pick-up coil; production of overhanging absorbers for enhanced efficiency of x-ray absorption; fabrication on SiN membranes to minimize the effects on energy resolution from athermal phonon loss. We have also improved the deposition of the magnetic sensor film such that the film magnetization is nearly completely that is expected from the AuEr sputter target bulk material. In addition, we have included a study of a positional sensitive design, the Hydra design, which allows thermal coupling of four absorbers to a common MMC sensor and circuit.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Contact-Free Germanium Ionization and Phonon Detectors

A new method to study the origin of the dead-layer in ionization-phonon detectors was developed wherein the ionization is measured via a 25 micron gap between the collection electrodes and germanium absorber. Phonon signals are measured with small tungsten thermometers (Tc{approx}90 mK) varnished to the Ge substrates. The Ge samples were studied using collimated {sup 241}Am sources. With this geometry, different contributions to the 'dead-layer' effect can be studied independently: Carrier back diffusion, trapping on surface states, Schottky barrier lowering, etc.

36 MATERIALS SCIENCE↗

Growth and magnetic property of {zeta}-phase Mn{sub 2}N{sub 1{+-}x} thin films by plasma-assisted molecular beam epitaxy

{zeta}-phase manganese nitride films were directly grown on sapphire substrates using plasma-assisted molecular beam epitaxy. Mn{sub 2}N{sub 1.06}, Mn{sub 2}N{sub 0.98}, and Mn{sub 2}N{sub 0.86} films were synthesized by controlling the temperature of the effusion cell filled with highly pure manganese powder. The composition, structure, and morphology of the films were identified by x-ray photoelectron spectroscopy, x-ray diffraction and atomic force microscopy, and the magnetic properties of the films were characterized by a superconducting quantum interference device magnetometer at 5 and 300 K. The magnetic measurements reveal that Mn{sub 2}N{sub 1{+-}x} exhibits weak ferromagnetism at 5 K, which is mainly ascribed to the weak interaction among the Mn cations induced by the nitrogen vacancies. Furthermore, the Mn{sub 2}N{sub 0.86} single-crystalline films are found to have room-temperature ferromagnetism, which is attributed to the strain of the Mn{sub 2}N{sub 0.86} films raised from lattice mismatch between the Mn{sub 2}N{sub 0.86} films and the substrates.

36 MATERIALS SCIENCE↗

Magnetic properties of iron nanoparticle

Magnetic properties of Fe nanoparticles with different sizes synthesized by a physical deposition technique have been investigated experimentally. We have used a high pressure sputtering technique to deposit iron nanoparticles on a silicon substrate. The nanoparticles are then analyzed using atomic force microscopy (AFM), transmission electron microscopy (TEM), and superconducting quantum interference device techniques. TEM and AFM data show that the particle size could be tuned by adjusting the deposition conditions. The magnetic properties have been investigated from temperature dependent magnetization M(T) and field dependent magnetization M(H) measurements. The results show that two phases including both ferromagnetic and superparamagnetic particles are present in our system. From these data we extracted the superparamagnetic critical size to be 9 nm for our samples. Ferromagnetic particles are single magnetic domain particles and the magnetic properties can be explained by the Stoner and Wohlfarth model. For the superparamagnetic phase, the effective anisotropy constant, K{sub eff}, decreases as the particle size increases.

36 MATERIALS SCIENCE↗

The Axion Dark-Matter eXperiment (ADMX): Recent Results

The axion is a hypothetical elementary particle whose existence would explain the baffling absence of CP violation in the strong interactions. It's properties in addition make it a good dark-matter candidate. Even though dark-matter axions would make up the overwhelming majority of mass in the universe, they are extraordinarily difficult to detect. We have developed a detector, ADMX, for dark-matter axions that is at heart an exquisitely sensitive detector of electromagnetic radiation. This talk will describe the progress we have made in this experimental search.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Pierre Sikivie and the Gift for Simple Ideas

I comment on the status and future prospects of the field of axion searches in the context of the seminal contributions of Pierre Sikivie.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The influence of microstructure on magnetic properties of nanocrystalline Fe-Pt-Nb-B permanent magnet ribbons

A FePt-based hard-magnetic nanocomposite of exchange spring type was prepared by isothermal annealing of melt-spun Fe{sub 52}Pt{sub 28}Nb{sub 2}B{sub 18} (atomic percent) ribbons. The relationship between microstructure and magnetic properties was investigated by qualitative and quantitative structural analysis based on the x-ray diffraction, transmission electron microscopy, and {sup 57}Fe Moessbauer spectrometry on one hand and the superconducting quantum interference device magnetometry on the other hand. The microstructure consists of L1{sub 0}-FePt hard-magnetic grains (15-45 nm in diameter) dispersed in a soft magnetic medium composed by A1 FePt, Fe{sub 2}B, and boron-rich (FeB)PtNb remainder phase. The ribbons annealed at 700 deg. C for 1 h exhibit promising hard-magnetic properties at room temperature: M{sub r}/M{sub s}=0.69; H{sub c}=820 kA/m and (BH){sub max}=70 kJ/m{sup 3}. Strong exchange coupling between hard and soft magnetic phases was demonstrated by a smooth demagnetizing curve and positive {delta}M-peak in the Henkel plot. The magnetic properties measured from 5 to 750 K reveals that the hard characteristics remains rather stable up to 550 K, indicating a good prospect for the use of these permanent magnets in a wide temperature range.

36 MATERIALS SCIENCE↗

Epitaxial integration of ferromagnetic correlated oxide LaCoO{sub 3} with Si (100)

We have grown epitaxial strained LaCoO{sub 3} on (100)-oriented silicon by molecular beam epitaxy using a relaxed epitaxial SrTiO{sub 3} buffer layer. Superconducting quantum interference device magnetization measurements show that, unlike the bulk material, the ground state of the strained LaCoO{sub 3} on silicon is ferromagnetic with a T{sub C} of 85 K. First principles calculations suggest that a ferromagnetic ground state can be stabilized in LaCoO{sub 3} by a sufficiently large biaxial tensile strain with the transition accompanied by a partial untilting of the CoO{sub 6} octahedra.

36 MATERIALS SCIENCE↗

Magnetization reversal processes of epitaxial Fe{sub 3}Si films on GaAs(001)

We report magneto-optical Kerr microscopy study of the magnetic reversal behavior of Fe{sub 3}Si/GaAs(100) epitaxial thin films grown by molecular beam epitaxy. Results are described in the context of superconducting quantum interference device and Kerr effect vector magnetometry to study the magnetic switching behavior. By tuning the Fe concentration of the samples from 75% to 83%, we found that the ratio of uniaxial to cubic anisotropy constants {gamma} (=|K{sub u}/K{sub 1}|) would tremendously vary from 0.06 to 0.3. When the field was applied along the easy axis of Fe{sub 3}Si samples, a step feature was observed in the M-H loops. This feature has been resolved in the domain image by Kerr microscopy, in which we observed a two-switching behavior at the field where the step feature occurred. These can be qualitatively understood by considering the ratio {gamma}.

36 MATERIALS SCIENCE↗

Influence of Au capping layer on the magnetic properties of ultrathin epitaxial Fe{sub 3}O{sub 4}/GaAs(001) film

The effect of the Au capping layer on the magnetic anisotropies and molecular magnetic moment of ultrathin epitaxial Fe{sub 3}O{sub 4} films on GaAs(100) substrate was studied by MO Kerr effect, superconducting quantum interference device, and Ferromagnetic resonance, respectively. The films with and without capping layers show a predominant in-plane uniaxial magnetic anisotropy and a minor fourfold anisotropy. The Au capping layer was found to increase significantly the uniaxial magnetic anisotropy related to the magnetoelastic interactions at the Au/Fe{sub 3}O{sub 4} interface, and unexpectedly reduce saturation molecular magnetization due to the interfacial diffusion between Au layer and Fe{sub 3}O{sub 4} layer.

36 MATERIALS SCIENCE↗

Study on ion-irradiation-induced ferromagnetism in FeRh intermetallic compound by means of magnetic Compton scattering

The magnetic Compton profiles of Fe-50 at. % Rh intermetallic compound were measured to study the ferromagnetism induced by 200 MeV Xe ion irradiation. The magnetic effect at 50 K increases with increasing the ion-fluence. The analysis of the experimental result revealed that the values of spin moment induced by the irradiation were close to the values of magnetization obtained by a superconducting quantum interference device magnetometer, suggesting that the ion irradiation mainly induces the spin magnetic moment. The difference in magnetic Compton profiles between the irradiation-induced ferromagnetism and the intrinsic ferromagnetism in pure Fe is also discussed.

36 MATERIALS SCIENCE↗

Direct exchange interaction of localized spins associated with unpaired sp electrons in Be-doped low-temperature-grown GaAs layers

Beryllium-doped GaAs layers grown at low temperatures by molecular-beam epitaxy contain localized spins associated with unpaired sp electrons of As{sub Ga}{sup +} ions. Interactions of these localized spins are investigated by measuring the magnetization with a superconducting quantum interference device and the peak-to-peak width of electron paramagnetic resonance (EPR) spectra for samples with different spin concentrations ranging from 3 x 10{sup 18} to 2.0 x 10{sup 19} cm{sup -3}. The results show that localized spins in this material antiferromagnetically interact on each other via direct exchange. From the analysis of the temperature dependence and field dependence of the magnetization on the basis of the Curie-Weiss law and the molecular-field approximation, exchange energy of each sample was derived. The dependence of the exchange energy on the concentration of localized spins is reasonably explained by a model of direct exchange, which results from the overlapping of wave functions of unpaired electrons at As{sub Ga}{sup +} ions. The peak-to-peak width of EPR spectra increases with an increase in the spin concentration at low temperatures, whereas it decreases with an increase in the temperature for samples with high spin concentrations. These EPR results also show that significant exchange interactions indeed occur between localized spins in this material. These effects of direct exchange interactions between localized spins can clearly be observed at their average distances of around 4 nm, which implies a considerably large spatial extension of the wave function of an unpaired sp electron around an As{sub Ga}{sup +} ion.

36 MATERIALS SCIENCE↗

A superconducting quantum interference device based read-out of a subattonewton force sensor operating at millikelvin temperatures

We present a scheme to measure the displacement of a nanomechanical resonator at cryogenic temperature. The technique is based on the use of a superconducting quantum interference device to detect the magnetic flux change induced by a magnetized particle attached on the end of the resonator. Unlike conventional interferometric techniques, our detection scheme does not involve direct power dissipation in the resonator, and therefore, is particularly suitable for ultralow temperature applications. We demonstrate its potential by cooling an ultrasoft silicon cantilever to a noise temperature of 25 mK, corresponding to a subattonewton thermal force noise of 0.5 aN/{radical}(Hz).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calibration of ac and dc magnetometers with a Dy{sub 2}O{sub 3} standard

The ac susceptibility and magnetization curves of a glued Dy{sub 2}O{sub 3} powder sample are measured by an ac susceptometer and a dc superconducting quantum interference device magnetometer, both of which have been calibrated previously. It is shown that the magnetic moment of the paramagnetic sample as a function of field and temperature may be accurately expressed by a combination of the Curie-Weiss law and the Langevin function at T > 45 K with three adjusting parameters, so that the dc magnetization curves and the magnitude and phase of ac susceptibility at different values of dc bias field measured by any magnetometer can be calibrated by using Dy{sub 2}O{sub 3} as a standard. The expressions are empirical and cannot be justified in the entire field and temperature range by existing theories of paramagnetism. Below 10 K, indication of approaching a possible phase transition is found. It is shown that pure Dy{sub 2}O{sub 3} powder may be used as a primary standard, with susceptibility [13.28(T+ 17)]{sup -1} emu/Oe/g at T > 50 K and H < 10 kOe, in consistency with the Curie-Weiss law and the quantum mechanical theory of paramagnetism.

36 MATERIALS SCIENCE↗

Alternating current magnetic susceptibility of a molecular magnet submonolayer directly patterned onto a micro superconducting quantum interference device

We report the controlled integration, via dip pen nanolithography, of monolayer dots of ferritin-based CoO nanoparticles (12 μ{sub B}) into the most sensitive areas of a microSQUID sensor. The nearly optimum flux coupling between these nanomagnets and the microSQUID improves the achievable sensitivity by a factor 10{sup 2}, enabling us to measure the linear susceptibility of the molecular array down to very low temperatures (13 mK). This method opens the possibility of applying ac susceptibility experiments to characterize two-dimensional arrays of single molecule magnets within a wide range of temperatures and frequencies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Freestanding nanostructures for three-dimensional superconducting nanodevices

Free-space nanostructures are the fundamental building blocks of three-dimensional (3D) nanodevices with multi-functionality beyond that achievable by planar devices. Here we developed a reliable technique for the site-specific post-growth geometrical manipulation of freestanding superconducting nanowires using ion-beam irradiation with nanometer-scale resolution to fabricate uniformly shaped and sized clean-surface 3D nanostructures. Such structures could integrate with conventional superconducting quantum interference devices to detect magnetic fields both parallel and normal to the substrate. Property characterizations suggest that our focused-ion-beam technique allows tailoring of freestanding superconducting loops for size and geometry, potentially for lab-on-chip experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗