Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Mapping surrogate gasoline compositions into RON/MON space

In this paper, new experimentally determined octane numbers (RON and MON) of blends of a tri-component surrogate consisting of toluene, n-heptane, i-octane (called toluene reference fuel TRF) arranged in an augmented simplex design are used to derive a simple response surface model for the octane number of any arbitrary TRF mixture. The model is second-order in its complexity and is shown to be more accurate to the standard ''linear-by-volume'' (LbV) model which is often used when no other information is available. Such observations are due to the existence of both synergistic and antagonistic blending of the octane numbers between the three components. In particular, antagonistic blending of toluene and iso-octane leads to a maximum in sensitivity that lies on the toluene/iso-octane line. The model equations are inverted so as to map from RON/MON space back into composition space. Enabling one to use two simple formulae to determine, for a given fuel with known RON and MON, the volume fractions of toluene, n-heptane and iso-octane to be blended in order to emulate that fuel. HCCI engine simulations using gasoline with a RON of 98.5 and a MON of 88 were simulated using a TRF fuel, blended according to the derived equations to match the RON and MON. The simulations matched the experimentally obtained pressure profiles well, especially when compared to simulations using only PRF fuels which matched the RON or MON. This suggested that the mapping is accurate and that to emulate a refinery gasoline, it is necessary to match not only the RON but also the MON of the fuel. (author)

02 PETROLEUM↗

Toward control co-design of utility-scale wind turbines: Collective vs. individual blade pitch control

A large-eddy simulation framework has been coupled with controller modules to systematically investigate the impacts of collective (CPC) and individual (IPC) pitch control strategies on utility-scale wind turbine energy production and fatigue loads. Wind turbine components were parameterized using an actuator surface model to simulate the rotor blades and the turbine nacelle. The baseline CPC and IPC algorithms, consisting of single-input single-output proportional–integral controllers and two integral controllers, respectively, were incorporated into the numerical framework. A series of simulations were carried out to investigate the relative performance of the two controllers under various turbulent inflow conditions, spanning hub-height velocities of 7 to 14 m/s. The numerical simulation results of this study showed that, in comparison to the CPC, the IPC controller could successfully reduce the damage equivalent loads of utility-scale turbines at regions 2 and 3 of turbine operation by about 3% and 40%, respectively, without any penalty on the power production of the turbine. It was also shown that, despite its minor impact on the turbulence kinetic energy of the wake, the IPC controller did not influence the recovery of the turbine wake.

17 WIND ENERGY↗

Synergistic cellulase–xylanase formulations for enhanced dewatering and fiber bonding toward energy-efficient and sustainable paper and packaging production

A mechanistic understanding of the synergistic effects of enzymes on cellulosic fibers dewatering and fiber bonding is essential for advancing energy-efficiency and lightweight production of paper and packaging materials. This study investigates the impact of varying cellulase and xylanase formulations on equilibrium moisture content (EMC) after pressing and tensile strength of cellulosic fiber webs using a factorial experimental design. Nine custom enzyme formulations were evaluated at controlled dosages ranging from ∼20 to 76 FPU/mL cellulase and ∼500–1130 IU/mL xylanase. Response surface modeling revealed a significant synergy, particularly at 20–40 FPU/mL cellulase combined with ≥ 1000 IU/mL xylanase. Under these conditions, EMC decreased by up to 3.6% compared with the untreated refined control, while tensile index gains of up to 16% were statistically significant for optimized blends (p < 0.05). The interaction between cellulase and xylanase was also significant for the tensile response (p = 0.010). Protein efficiency analysis showed that optimized formulations containing 30–40% less protein outperformed the commercial benchmark. The nonlinear synergy between cellulase and xylanase is attributed to their complementary substrate specificities. Endoglucanase- and β‑glucosidase‑rich cellulases hydrolyze internal β‑1,4‑glycosidic bonds in amorphous cellulose, loosening fiber walls and increasing flexibility, while xylanases target hemicellulose, primarily xylan-rich domains, enhancing porosity and improve cellulase accessibility. Tailoring enzyme formulations at low loadings overcomes traditional trade-offs between strength and dewatering, enabling cost-effective, energy-efficient, low-carbon solutions for sustainable packaging and hygiene products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assessment of age, origin, and sustainability of fossil aquifers: A geochemical and remote sensing-based approach

An integrated approach was developed to assess the sustainability, origin, age, evolution, and groundwater potential of large fossil aquifers using the Mega Aquifer System (MAS) (area: 2 x 10(6) km(2)) in the Arabian Peninsula as a test site. A two-step exercise was adopted, the sustainability of the MAS was first investigated through the analysis of GRACE data and land surface model (LSM) outputs. Then, integrated geochemical, remote sensing, and field studies were conducted to address the age, origin, hydrogeological setting, and evolution of the southern sections of the MAS (Rub Al Khali Aquifer System (RAKAS)), the area identified from the analysis of GRACE and ISMs as being the most suited for sustainable development. Analysis of GRACE and ISMs revealed: (1) the MAS central and northern sections are experiencing high groundwater extraction (6.6 km(3)/yr) and depletion rates (-2.8 +/- 0.8 km(3)/yr) with minimum balancing potential through aquifer capture processes, yet sustainability could be achieved by reducing annual extraction by 2.8 km(3), and (2) the MAS southern sections (Rub Al Khali Aquifer System (RAKAS)) are experiencing low groundwater depletion rates (eastern RAKAS: -1.8 +/- 1.4 mm/yr) to steady-state conditions (western RAKAS: -0.73 +/- 1.4 mm/yr). Geochemical, remote sensing, and field investigations over the RAKAS revealed: (1) the presence of west to east trending drainage networks and large-scale groundwater flow systems consistent with a meteoric source (precipitation over Red Sea Hills); (2) increasing Cl-36 model ages along groundwater flow directions (up to 970,000 years), indicating aquifer recharge in wet Pleistocene periods; (3) progressive depletion in the O and H stable isotopic compositions of aquifers with increasing distance from the Red Sea Hills basement outcrops, indicating modest recharge during prevailing dry conditions; and (4) the presence of relatively fresh (TDS: 800-2800 mg/L) and nonradioactive (Ra-226 + Ra-228 < 0.185 Bq/kg) water in western RAKAS. Findings suggest that sustainable agricultural development is achievable at current extraction rates in western RAKAS and provide a replicable and cost-effective model.

Fossil aquifers↗

The impact of multi-sensor land data assimilation on river discharge estimation

River discharge is one of the most critical renewable water resources. Accurately estimating river discharge with land surface models (LSMs) remains challenging due to the difficulty in estimating land water storages such as snow, soil moisture, and groundwater. While data assimilation (DA) ingesting optical, microwave, and gravity measurements from space can help constrain theses storage states, its impacts on runoff and eventually river discharge are not fully understood. In this study, by taking advantage of recently published land DA results that jointly assimilate eight different combinations of observations from the Moderate Resolution Imaging Spectroradiometer (MODIS), Gravity Recovery and Climate Experiment (GRACE), and Advanced Microwave Scanning Radiometer for EOS (AMSR-E), we quantify to what degree multi-sensor land DA improves the river discharge simulation skills over 40 global river basins, and investigate the complementary strengths of different satellite measurements on river discharge. To be more specific, river discharge is updated by feeding gridded runoff from the eight multi-sensor DA simulations into a vector-based river routing model named the Routing Application for Parallel computatIon of Discharge (RAPID). Our modeling results, including 7-year simulations at 177,458 river reaches globally, are used to study the seasonal to interannual variability of river discharge. It is found that assimilating GRACE has the greatest impact on global runoff patterns, leading to the most pronounced improvements in spatial river discharge in the middle and high latitudes with the R 2 increased by 0.16. The seasonal variation of spatial discharge is most skillful during the boreal summer. However, our evaluation also shows model and DA still struggle to generate reasonable variability and averaged discharge over permafrost regions. Finally, by assessing how different satellites add value to discharge forecasts, this study paves the way for more advanced multi-sensor satellite data assimilation to predict the terrestrial hydrological cycle.

54 ENVIRONMENTAL SCIENCES↗

Similarity of wake meandering for different wind turbine designs for different scales

The wake meandering characteristics of four different wind turbine designs with diameters ranging from a few centimetres (wind tunnel scale) to a hundred metres (utility scale) are investigated using large-eddy simulation with the turbine blades and nacelle parametrised using a new actuator surface model. Different velocity fields and meandering behaviours are observed at near-wake locations. At far-wake locations, on the other hand, the mean velocity deficit profiles begin to collapse when scaled by the centreline velocity deficit based on the incoming wind speed at turbine hub height, suggesting far-wake similarity across scales. The turbine-added turbulence kinetic energy profiles are shown to also nearly collapse with each other in the far wake when normalised using a velocity scale defined by the thrust on the turbine rotor. Moreover, we show that at far-wake locations, the simulated flow fields for all four turbine designs exhibit similar wake meandering characteristics in terms of (1) a Strouhal number independent of rotor designs of different sizes and (2) the distributions of wake meandering wavelengths and amplitudes when normalised by the rotor diameter and a length scale defined by the turbine thrust respectively.

Mechanics↗

Advances in Clayff Molecular Simulation of Layered and Nanoporous Materials and Their Aqueous Interfaces

As a general-purpose force field for molecular simulations of layered materials and their fluid interfaces, Clayff continues to see broad usage in atomistic computational modeling for numerous geoscience and materials science applications due to its (1) success in predicting properties of bulk nanoporous materials and their interfaces, (2) transferability to a range of layered and nanoporous materials, and (3) simple functional form which facilitates incorporation into a variety of simulation codes. Here, we review applications of Clayff to model bulk phases and interfaces not included in the original parameter set and recent modifications for modeling surface terminations such as hydroxylated nanoparticle edges. Overall, we conclude with a discussion of expectations for future developments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MoS 2 Nanoclusters Grown on TiO 2 : Evidence for New Adsorption Sites at Edges and Sulfur Vacancies

MoS 2 clusters have been grown on a TiO 2 (110) substrate to provide a model surface for better understanding the adsorbate interactions and chemical activity on titania-supported MoS 2 clusters. Scanning tunneling microscopy experiments show that clusters with elongated shapes and flat tops are formed, and the long axes of the clusters have specific orientations with respect to the [001] direction on TiO 2 (110). In contrast, deposition of Mo in the absence of H 2 S results in a high density of smaller, round clusters that cover the majority of the surface. The morphologies of the MoS 2 clusters do not change after exposure to various gases (D 2 , CO, O 2 , H 2 O, and methanol) in ultrahigh vacuum. However, exposure to higher pressures of O 2 , H 2 O, or methanol (10 Torr), as well as exposure to air, causes the clusters to disintegrate as Mo in the clusters becomes oxidized. Temperature-programmed desorption studies with CO on the MoS 2 clusters show a distinct desorption peak at 280 K, which is not observed on metallic Mo or titania. Finally, density functional theory calculations suggest that these new adsorption sites for CO are at the edges of the elongated MoS 2 clusters, particularly along the ($10\bar{1}0$) edge containing sulfur vacancy sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Decacyclene Trianhydride at Functional Interfaces: An Ideal Electron Acceptor Material for Organic Electronics

We report the interface energetics of decacyclene trianhydride (DTA) monolayers on top of two distinct model surfaces, namely, Au(111) and Ag(111). On the latter, combined valence band photoemission and X-ray absorption measurements that access the occupied and unoccupied molecular orbitals, respectively, reveal that electron transfer from substrate to surface sets in. Moreover, density functional theory calculations confirm our experimental findings and provide an understanding not only of the photoemission and X-ray absorption spectral features of this promising organic semiconductor but also of the fingerprints associated with the interface charge transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MXene Nanosheets Functionalized with Cu Atoms for Urea Adsorption in Aqueous Media

Ti 3 C 2 T x MXene is an emerging family of two-dimensional materials, and because of its large specific surface area, it has potential for many applications. Herein, a new application using Cu-doped MILD (minimally intensive layer delamination) synthesized Ti 3 C 2 T x MXene for urea removal is demonstrated. The doping of Cu on MXene results in an increase in its affinity for urea adsorption as compared to the pristine MILD synthesized MXene due to the formation of the Cu–urea complex. Previous computational studies have shown that the adsorption energies of urea on the MXene surface can be improved in the presence of Cu. The valence state of Cu in the doped MILD synthesized MXene, which binds on to the surface via Ti–O–Cu linkage, is between 0 and +1 as verified by XAS and XPS. As the optimal urea adsorption occurs on Cu as a single atom site, an increase in Cu doping on MXene does not increase urea removal due to Cu agglomeration. Furthermore, looking at the adsorption behaviour, it seems that Cu-doped MXene follows the monolayer adsorption on homogenous surface model.

36 MATERIALS SCIENCE↗

The promotional effects of cesium promoter on higher alcohol synthesis from syngas over cesium-promoted Cu/ZnO/Al2O3 catalysts

In this study, the promotional effects of cesium promoter on higher alcohol (C2+OH) synthesis from syngas over Cs-Cu/ZnO/Al2O3 catalysts were investigated using a combined experimental and theoretical density functional theory (DFT) calculation method. In the presence of cesium, the C2+OH productivity increases from 77.1 g•kgcat-1•h-1 to 157.3 g•kgcat-1•h-1 at 583 K due to the enhancement of the initial C–C bond formation. Detailed analysis of chain growth probabilities (CGPs) confirms that initial C–C bond formation is the rate-determining step in the temperature range of 543-583 K. Addition of cesium promoter significantly increases the productivities of 2-methyl-1-propanol, while the CGPs values (C3* to 2-methyl-C3*) is almost unaffected. With the assistance of cesium promoter, the CGPs of the initial C–C bond formation step (C1* to C2*) could be increased from 0.13 to 0.25 at 583 K. DFT calculations indicate that the initial C–C bond formation is mainly contributed by the HCO+HCO coupling reaction over the ZnCu(211) model surface. In the presence of the Cs2O, the stabilities of key reaction intermediates such as HCO and H2CO are enhanced which facilitates both HCO+HCO and HCO+H2CO coupling reaction steps with lower activation barriers over the Cs2O-ZnCu(211) surface. The promotional effects of cesium on the C2+OH productivity are also benefited from the competitive CH+HCO coupling reaction over CH hydrogenation that leads to lower alkane formation. In addition, Bader charge analysis suggests that the presence of cesium ions would facilitate the nucleophilic reaction between HCO and H2CO for initial C–C bond formation. This work was supported by the National Natural Science Foundation of China (No. 91545114 and No. 91545203). We appreciate the joint PhD scholarship support from the China Scholarship Council. The authors would also like to thank the support from Collaborative Innovation Center of Chemistry for Energy Materials (2011-iChEM). DM was supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences. Computing time was granted by the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL). EMSL is a national scientific user facility located at Pacific Northwest National Laboratory (PNNL) and sponsored by DOE’s Office of Biological and Environmental Research. PNNL is a multiprogram national laboratory operated for DOE by Battelle Memorial Institute. We also appreciate the support from Sinochem Quanzhou Petrochemical Co. Ltd.

cesium↗

Dry Reforming of Ethane and Butane with CO 2 over PtNi/CeO 2 Bimetallic Catalysts

Dry reforming is a potential process to convert CO 2 and light alkanes into syngas (H 2 and CO), which can be subsequently transformed to chemicals and fuels. Here in this work, PtNi bimetallic catalysts have been investigated for dry reforming of ethane and butane using both model surfaces and supported powder catalysts. The PtNi bimetallic catalyst shows an improvement in both activity and stability as compared to the corresponding monometallic catalysts. The formation of PtNi alloy and the partial reduction of Ce 4+ to Ce 3+ under reaction conditions are demonstrated by in-situ Ambient Pressure X-ray Photoemission Spectroscopy (AP-XPS), X-ray Diffraction (XRD) and X-ray Absorption Fine Structure (XAFS) measurements. A Pt-rich bimetallic surface is revealed by Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) following CO adsorption. Combined in-situ experimental results and Density Functional Theory (DFT) calculations suggest that the Pt-rich PtNi bimetallic surface structure would weaken the binding of surface oxygenates/carbon species and reduce the activation energy for C-C bond scission, leading to an enhanced dry reforming activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective Hydrogenation of Biomass-Derived 2(5H)-Furanone to γ-Butyrolactone over Ni-Based Bimetallic Catalysts

2(5H)-Furanone was selectively hydrogenated to γ-butyrolactone (GBL) over Ni-based bimetallic catalysts, Ni-M/SiO2 (M = Fe, Co, Cu, and Zn). Catalyst characterization showed that the metal dispersion and reducibility were changed after introducing a second metal, while the physical morphology was nearly unchanged. The most active and selective bimetallic catalyst was found to be Ni–Fe/SiO2. The reaction rate constant over the 4 wt %Ni–1 wt %Fe/SiO2 bimetallic catalyst was 0.06 min–1, doubling that over 5 wt %Ni/SiO2, and the selectivity to GBL increased slightly from 86.1 to 89.5%. The Fe/(Ni+Fe) weight ratio was changed to optimize the promoting effect of Fe. The Ni–Fe bimetallic effect was further investigated using temperature-programmed desorption experiments on single crystal model surfaces with different Fe/Ni(111) structures, revealing that the enhanced catalyst activity was mainly contributed by the formation of the Ni–Fe surface alloy.

bio-inspired↗

In Situ Infrared Ellipsometry for Protein Adsorption Studies on Ultrathin Smart Polymer Brushes in Aqueous Environment

The protein-adsorbing and -repelling properties of various smart nanometer-thin polymer brushes with high potential for biosensing and biomedical applications are studied by in-situ infrared-spectroscopic ellipsometry (IRSE). IRSE as a highly sensitive non-destructive technique allows us to investigate protein adsorption on polymer brushes in aqueous environment in dependence of external stimuli like temperature and pH. These stimuli are, for instance, relevant in switchable mixed brushes containing poly(N-isopropyl acrylamide) and poly(acrylic acid), respectively. We use such brushes as model surfaces for controlling protein adsorption of human serum albumin and human fibrinogen. IRSE can distinguish between polymer-specific vibrational bands, which yield insights into the hydration state of the brushes, and changes in the protein-specific amide bands, which are related to changes of the protein secondary structure.

36 MATERIALS SCIENCE↗

Hybrid Quantum Mechanics/Molecular Mechanics Solvation Scheme for Computing Free Energies of Reactions at Metal–Water Interfaces

We report the development of a quantum mechanics/molecular mechanics free energy perturbation (QM/MM-FEP) method for modeling chemical reactions at metal-water interfaces. This novel solvation scheme combines planewave density function theory (DFT), periodic electrostatic embedded cluster method (PEECM) calculations using Gaussian-type orbitals, and classical molecular dynamics (MD) simulations to obtain a free energy description of a complex metal-water system. We derive a potential of mean force (PMF) of the reaction system within the QM/MM framework. A fixed-size, finite ensemble of MM conformations is used to permit precise evaluation of the PMF of QM coordinates and its gradient defined within this ensemble. Local conformations of adsorbed reaction moieties are optimized using sequential MD-sampling and QM-optimization steps. An approximate reaction coordinate is constructed using a number of interpolated states and the free energy difference between adjacent states is calculated using the QM/MM-FEP method. By avoiding on-the-fly QM calculations and by circumventing the challenges associated with statistical averaging during MD sampling, a computational speedup of multiple orders of magnitude is realized. The method is systematically validated against the results of ab initio QM calculations and demonstrated for C–C cleavage in double-dehydrogenated ethylene glycol on a Pt (111) model surface.

Chemical calculations↗

Tunable Cu Enrichment Enables Designer Syngas Electrosynthesis from CO 2

Using renewable energy to recycle CO 2 provides an opportunity to both reduce net CO 2 emissions and synthesize fuels and chemical feedstocks. It is of central importance to design electrocatalysts that both are efficient and can access a tunable spectrum of products. Syngas, a mixture of carbon monoxide (CO) and hydrogen (H 2 ), is an important chemical precursor that can be converted downstream into small molecules or larger hydrocarbons by fermentation or thermochemistry. Many processes that utilize syngas require different syngas compositions: we therefore pursued the rational design of a family of electrocatalysts that can be programmed to synthesize different designer syngas ratios. We utilize in situ surface-enhanced Raman spectroscopy and first-principles density functional theory calculations to develop a systematic picture of CO* binding on Cu-enriched Au surface model systems. Insights from these model systems are then translated to nanostructured electrocatalysts, whereby controlled Cu enrichment enables tunable syngas production while maintaining current densities greater than 20 mA/cm 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Observation of the Orientational Anisotropy of Buried Hydroxyl Groups inside Muscovite Mica

Muscovite mica (001) is a widely-used model surface for controlling molecular assembly and a common substrate for environmental adsorption processes. The mica (001) surface displays near trigonal symmetry, but many molecular adsorbates — including water — exhibit unequal probabilities of alignment along its three nominally equivalent lattice directions. Buried hydroxyl groups within the muscovite structure are speculated to be responsible, but direct evidence is lacking. Here we utilize vibrational sum frequency generation spectroscopy (vSFG) to characterize the orientation and hydrogen-bonding environment of near-surface hydroxyls inside mica. Multiple distinct peaks are detected in the O-H stretch region, which we attribute to Si/Al substitution in the SiO4 tetrahedron and K+ ion adsorption above the hydroxyls based on density functional theory simulations. Our findings demonstrate that vSFG can identify the absolute orientation of –OH groups and hence the surface termination at a mica surface, providing a means to investigate how –OH groups influence molecular adsorption and better understand mica stacking-sequences and physical behavior.

Tuladhar, Aashish↗