Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Wind transport near the poles of Mars: Timescales of changes in deposition and erosion

Movement of sediment into and out of polar deposits is closely linked to the polar volatile budget and to changes in wind systems over the course of astronomically induced climate cycles. The present observations of the morphology of polar layered deposits, mantling sediments, dune fields, and variable surface features are the basis of inferences on the efficacy of polar sediment transport mechanisms. The time scales of formation of these features vary from days to perhaps 10(exp 6) yr, and latitudinal banding of dune fields near the poles may have been formed on timescales of 10(exp 7) yr. Orientations of intracrater dunes, dune crests, and wind streaks have been measured for latitudes -45 to -90 to compare features of likely different timescales of formation with models of wind flow from the south polar region. There is a complex variation with latitude of the indicated wind directions and of the efficacy of the resultant winds in orienting dune fields that suggests influence of frost cover on the ability of winds to move sediment in the spring and fall. Because of changes in the relative effectiveness of spring and fall winds expected with progression of the season of perihelion, the latitudinal variation in transport efficiency may mean that sediments at different latitudes dominantly respond to wind erosion and transport at different times during the perihelion cycle.

Thomas, Peter C.↗

New very large array maps of highly core-dominated BL Lacs: Testing unified schemes

We present high dyanamic range (greater than 10 000:1) Very Large Array (VLA) maps of four highly c ore-dominated BL Lacertae Objects (PKS 0735+178, OJ 287, 1219+285, and PKS 1413+135), all of which had been reported previously as being unresolved at dynamic ranges approximately 1000-3000:1. Three of the four possess low surface brightness kpc-scale structure, with extended power levels and morphologies reasonable for FR 1 radio galaxies. One, however (PKS 1413+135), possesses no extended structure at dynamic range 9600:1. Only one of the sources exhibits aligned Very Large Array (VLA) and VLBI structures, suggesting bends on approximately 100-1000 pc size scales for the other two. As these four have extremely high core-to-extended flux ratios (f approximately 30-5000), they provide an extreme test of unified schemes. By deriving minimum constraints for the beaming angles and Lorentz factors which are required to produce the degrees of core dominance seen, we find that the three extended radio sources are consistent with being beamed FR 1 radio galaxies. PKS 1413+135 remains an anomalous BL Lac Object for several reasons.

Perlman, Eric S.↗

A Long-Term Space Astrophysics Research Program. An X-Ray Perspective of the Components and Structure of Galaxies

We present optical and archival X-ray data on the disturbed morphology radio elliptical NGC 1316 (Fornax A) that displays numerous low surface brightness shells, loops and tails. An extended (81x27 min or 9x3 kpc) emission line region (EELR) at a projected distance of 35 kpc from the nucleus has been discovered in a approximately 9Ox35 kpc, approximately 3.Ox1O(solar luminosity(B)) tidal tail. The position and extreme size of the EELR suggest it is related to the merger process. We suggest that the ionization mechanism of the EELR is shock excitation, and the gas is remnant from the merger progenitor. X-ray emission is detected near two tidal tails. Hot, approximately 5 x 10(exp 6)K gas is probably the predominant gas component in the tidal tail ISM. However based on the current tidal tail (cold + warm + hot) gas mass, a large fraction of the tidal tail progenitor gas may already reside in the nucleus of NGC 1316. The numerous and varied tidal tail system suggests that a disk-disk or disk-E merger could have taken place greater than or equal to 1 Gyr ago, whilst a low mass, gas rich galaxy started to merge approximately 0.5 Gyr ago.

Fabbiano, G.↗

Spacecraft Sterilization Using Non-Equilibrium Atmospheric Pressure Plasma

As a solution to chemically and thermally destructive sterilization methods currently used for spacecraft, non-equilibrium atmospheric pressure plasmas are used to treat surfaces inoculated with Bacillus subtilis and Deinococcus radiodurans. Evidence of significant morphological changes and reduction in viability due to plasma exposure will be presented, including a 4-log reduction of B. subtilis after 2 minutes of dielectric barrier discharge treatment.

disinfection↗

Filamentous Trichomic Prokaryotes in Carbonaceous Meteorites: Indigenous Microfossils, Minerals, or Modern Bio-Contaminants?

Large complex filaments have been detected in freshly fractured interior surfaces of a variety of carbonaceous meteorites. Many exhibit the detailed morphological and morphometric characteristics of known filamentous trichomic prokaryotic microorganisms. In this paper we review prior studies of filamentous microstructures encountered in the meteorites along with the elemental compositions and characteristics of the, fibrous evaporite minerals and filamentous cyanobacteria and homologous trichomic sulfur bacteria. The meteorite images and elemental compositions will compared with data obtained with the same instruments for abiotic microstructures and living and fossil microorganisms in order to evaluate the relative merits of the alternate hypotheses that have been advanced to explain the nature and characteristics of the meteorite filaments. The possibiility that the filaments found in the meteorites may be comprise modern bio-contaminants will be evaluated in light of their observed elemental compositions and data by other researchers on the detection of indigenous complex organic biosignatures, and extraterrestrial amino acids and nucleobases found in the Murchison CM2 and the Orgueil CI1 carbonaceous meteorites.

Hoover, Richard B.↗

Advanced Lithium-ion Batteries with High Specific Energy and Improved Safety for Nasa's Missions

High Energy Materials ( Cathodes, anodes and high voltage and safe electrolyte are required to meet the needs of the future space missions. A. Cathodes: The layered layered composites of of Li2MnO3 and LiMO2 are promising Power capability of the materials, however requires further improvement. Suitable morphology is critical for good performance and high tap (packing) density. Surface coatings help in the interfacial kinetics and stability. B. Electrolytes: Small additions of Flame Retardant Additives improves flammability without affecting performance (Rate and cycle life). 1.0 M in EC+EMC+TPP was shown to have good performance against the high voltage cathode; Performance demonstrated in large capacity prototype MCMB- LiNiCoO2 Cells. Formulations with higher proportions are looking promising. Still requires further validation through abuse tests (e.g., on 18650 cells).

NASA Missions↗

Global View of the Bright Material on Vesta

At 525 km in mean diameter, Vesta is the second-most massive and one of the brightest asteroids of the main-belt. Here we give a global view of the bright material (BM) units on Vesta. We classified the BMs according to the normal visual albedo. The global albedo map of Vesta allows to be divided the surface into three principal types of terrains: bright regions, dark regions and intermediate regions. The distribution of bright regions is not uniform. The mid-southern latitudes contain the most bright areas, while the northern hemisphere is poor in bright regions. The analysis of the spectral parameters and the normal visual albedo show a dependence between albedo and the strength (depth) of ferrous iron absorption bands, strong bands correspond with high albedo units. Vesta's average albedo is 0.38, but there are bright material whose albedo can exceed 0.50. Only the E-Type asteroids have albedos comparable to those of the BMs on Vesta. The Dawn mission observed a large fraction of Vesta's surface at high spatial resolution, allowing a detailed study of the morphology and mineralogy of it. In particular, reflectance spectra provided by the Visible and InfraRed spectrometer (VIR), confirmed that Vesta's mineralogy is dominated by pyroxenes. All Vesta spectra show two strong absorption bands at approx 0.9 and 1.9 micron, typical of the pyroxenes and associated with the howardite, eucrite and diogenite (HED) meteorites.

Zambon, F.↗

Supercritical Water Mixture (SCWM) Experiment in the High Temperature Insert-Reflight (HTI-R)

Current research on supercritical water processes on board the International Space Station (ISS) focuses on salt precipitation and transport in a test cell designed for supercritical water. This study, known as the Supercritical Water Mixture Experiment (SCWM) serves as a precursor experiment for developing a better understanding of inorganic salt precipitation and transport during supercritical water oxidation (SCWO) processes for the eventual application of this technology for waste management and resource reclamation in microgravity conditions. During typical SCWO reactions any inorganic salts present in the reactant stream will precipitate and begin to coat reactor surfaces and control mechanisms (e.g., valves) often severely impacting the systems performance. The SCWM experiment employs a Sample Cell Unit (SCU) filled with an aqueous solution of Na2SO4 0.5-w at the critical density and uses a refurbished High Temperature Insert, which was used in an earlier ISS experiment designed to study pure water at near-critical conditions. The insert, designated as the HTI-Reflight (HTI-R) will be deployed in the DECLIC (Device for the Study of Critical Liquids and Crystallization) Facility on the International Space Station (ISS). Objectives of the study include measurement of the shift in critical temperature due to the presence of the inorganic salt, assessment of the predominant mode of precipitation (i.e., heterogeneously on SCU surfaces or homogeneously in the bulk fluid), determination of the salt morphology including size and shapes of particulate clusters, and the determination of the dominant mode of transport of salt particles in the presence of an imposed temperature gradient. Initial results from the ISS experiments will be presented and compared to findings from laboratory experiments on the ground.

salts↗

Updates on the Predictive Materials Modeling Software Tools

Updates on NASA‘s efforts to build a Predictive Material Modeling (PMM) framework from the micro-scale to the macro-scale are presented in this abstract. The PMM effort is part of the Entry Systems Modeling (ESM) project under NASA’s Game Changing Development (GCD) program. To reduce the need for extensive testing and accelerate the design cycle process, ESM is developing simulation and modeling tools that enable the characterization of the properties of thermal protection materials and their response to extremely hot plasma. The Porous Microstructure Analysis (PuMA) software has been developed to compute effective material properties and perform material response simulations on digitized microstructures of porous media. PuMA is able to import three-dimensional digital images obtained from X-ray microtomography or to generate artificial microstructures that mimic real materials. PuMA also provides a module for interactive 3D visualizations. Version 3, which was recently released as open-source, includes modules to compute simple morphological properties such as porosity, volume fractions, pore diameter, and specific surface area. Additional capabilities include the determination of effective thermal and electrical conductivity (both radiative and solid conduction - including the ability to simulate local anisotropy for the latter); effective diffusivity and tortuosity from the continuum to the rarefied regime; techniques to determine the local material orientation, as well as mechanical properties (elasticity coefficients), and permeability. Computed properties are then used to inform a macro-scale material response model, such as those implemented in the Porous material Analysis Toolbox based on OpenFOAM (PATO) software developed within ESM. The computational model in PATO is a generic heat and mass transfer model for porous reactive materials containing several solid phases and a single gas phase. The detailed chemical interactions occurring between the solid phases and the gas phase are modeled at the pore scale, assuming Local Thermal Equilibrium. Recent efforts include the development of a mechanical erosion model as well as a unified model allowing an intrinsic coupling between fluid and material. Comparison to flight data (Mars Science Laboratory [MSL] Entry Descent and Landing Instrument [MEDLI] and Mars 2020 MEDLI2) is critical in order to validate these computational tools. Examples of ablative material response using the code will be presented, including 3D simulations of the full-scale heatshield of the MSL capsule. The simulations demonstrated the ability of the modern material response code, PATO, to handle the material response of geometrically complex and large domains through the use of massively parallel computations.

material modeling↗

Cleanroom Microbes Survive Drying, Vacuum, and Proton Irradiation

Introduction : The goal of planetary protection at NASA is to mitigate the risk of contaminating sensitive target bodies with biological life. While many cleaning procedures have been put in place to reduce bioburden on spacecraft, microbes are experts at evolving to survive harsh conditions. Specifically, the dry, low-nutrient environment of a cleanroom (commonly used for assembly of spacecraft) can represent an environment where extremophiles can survive. Methods : Scientists at NASA MSFC wished to gather a snapshot of the microbial population within a variety of cleanrooms on site. A study was undertaken to collect air, surface, and floor samples from clean-rooms and isolate unique morphologies. From this study, 95 isolates were collected and saved in a microbial library. About 86% of these were identified at least to a genus level. Following identification, 24 microbes were selected, based on a literature review, as potential extremophiles. These were grown in liquid cultures, diluted to a set optical density, washed with water, and then applied to a sterilized Kapton coupon. Droplets were allowed to dry overnight in a biosafety cabinet. Coupons were then installed in a pelletron and pumped down to high vacuum (~1E-6 Torr). Samples were then subjected 100 keV protons at a fluence of 2x10 15 p+/cm 2 up to 4x10 15 p+/cm 2 . Following exposure, samples were returned to the microbiology lab where they were pro-cessed by submerging in water, vortexing, and then plating either droplets or spread plates. Recovery data collected was qualitative with a ranking or +, minor, or – for growth. Some selected radiotolerant strains were sequenced using the Illumina sequencing platform. The resulting genomes were annotated with the Rapid Annotations using Subsystems Technology (RAST) server and analyzed for conserved and unique stress response relevant genomic signatures to identify clues related to specific tolerances. Results and Discussion : After five rounds of proton radiation, we narrowed our isolates to five, non-spore forming bacteria that demonstrated survival: Arthrobacter koreensis, Paenarthrobacter nitroguajacolicus, Mycetocola manganoxydans , and an Erwinia sp. Furthermore, we exposed these four microbes to 254 nm wavelength light at an intensity of 80 W/m 2 at a distance of ~18 cm for 10 minutes. Only A. koreensis demonstrated survival following UV exposure. Finally, we performed whole genome sequencing on the four strains to look for genetic markers of stress resistance. When we compared the genomes of the four strains, we found that genes coding for GGDEF and EAL domains with PAS/PAC sensors were only found in A. koreensis . These domains, modulated by PAS/PAC sensors, are hypothesized to facilitate survival under drying, desiccation, and proton irradiation. Drying and Desiccation : PAS domains sense hydration changes and modulate GGDEF and EAL domain activity to adjust c-di-GMP levels, enhancing resistance to desiccation. For instance, in Pseudomonas aeruginosa , the PAS domain of RbdA modulates activity under varying hydration conditions, affecting stress responses [1]. Proton Irradiation : Proton irradiation causes oxidative stress, leading to ROS generation. PAS domains detect this stress and modulate GGDEF and EAL domains to manage oxidative stress responses. In Shewanella , EAL domain proteins modulated by PAS sensors help bacteria adapt to extreme conditions [2]. These genes upregulate other stress response genes, protecting membrane function, protein stability, DNA repair, and antioxidant defenses. The modulation of c-di-GMP by PAS domains is crucial for bacterial adaptation to stress conditions, enabling dynamic physio-logical adjustments [3]. Understanding these mechanisms provides insights into bacterial stress responses and strategies for controlling bacterial growth [4]. Conclusions : These findings indicate that clean-rooms harbor extremophile microbes that may be able to survive conditions in deep space. Furthermore, while we identified certain stress-response genes that may be at least partly responsible for the phenotypes observed in this study, there are likely unidentified genes or characteristics about A. koreensis , and other bacteria, that may allow them to survive in harsh environments. Future studies will focus on identifying these unknown genes and characteristics, further elucidating the mechanisms of extremophile survival and potentially informing the development of new biotechnologies for space exploration and other extreme environments.

Chelsi Cassilly↗

Lunar and Planetary Science XXXV: Impacts on Mars and Earth

The session "Impacts on Mars and Earth" included the following reports:A Timescale for Major Events in Early Mars Crustal Evolution; Impact Craters in Arabia Terra, Mars; Ancient Giant Basin/Aquifer System in the Arabia Region, Mars; Small Crater Morphology Within Gusev Crater and Isidis Planitia: Evidence for Widespread Secondaries on Mars; Martian Surface Properties: Inferences from Resolved Differences in Crater Geometries; Asymmetric Ramparts of Secondary Craters in Cerberus, Mars: Interpretation and Implications for Local Stratigraphy; Depth to Diameter Relationships of Craters in the High Latitudes (70 -80 ) of Mars: Implications for Geologic History of Those Areas; Impact Cratering on Mars: Search for Target Influence on Morphology; Starting Conditions for Hydrothermal Systems Underneath Martian Craters: Hydrocode Modeling; Impact-induced Hydrothermal System at the Sudbury Crater: Duration, Temperatures, Mechanics, and Biological Implications; Major and Trace Element Variations in Impact Crater Clay from Chicxulub, Lonar, and Mistastin, Implications for the Martian Soil; Stable Isotopes and Hydrothermal Fluid Source in the Yaxcopoil-1 Borehole, Chicxulub Impact Structure, Mexico; and Chicxulub Impact Melts: Geochemical Signatures of Target Lithology Mixing and Post-Impact Hydrothermal Fluid Processes.

Source record↗

Crater formation and modification on the icy satellites of Uranus and Saturn - Depth/diameter and central peak occurrence

Fresh crater shapes, in particular crater depth/diameter ratios d/D, have been measured for craters on nine of the icy satellites. Crater depths were determined from photoclinometry plus some shallow measurements. Interior morphology, including rimwall slope, was also examined from photoclinometry profiles. Central peak statistics and the characteristic break in slope of d/D curves were determined in order to estimate the transition diameter from simple to complex craters. Crater morphology and transition diameters on the icy satellites were then compared with crater morphology on the terrestrial rocky planets in order to separate or evaluate the relative importance and similarity of surface gravity and target characteristics in controlling crater formation and modification in icy and rocky targets. Estimates of effective rheologies of the target materials were also obtained based on morphologic changes.

Schenk, Paul M.↗

Cosmic influences on the early history of the lunar surface.

The testimony which the main features of the lunar surface bear on the cosmic environment in which the satellite acquired its principal morphological characteristics is examined. It is assumed as a working hypothesis that, in the earliest stages of the moon's history, the lunar sculpture in the continental areas was predominantly shaped by external impacts. It is considered that the argument against heliocentric orbits of particles whose collisions with the moon disfigured most of its continental areas continues to hold good. The distribution of craters due to oblique impacts appears to be essentially at random all over the lunar surface.

Kopal, Z.↗

A study of the nature of solid particle impact and shape on the erosion morphology of ductile metals

Impulsive versus steady jet impingement of spherical glass bead particles on metal surfaces was studied using a gas gun facility and a commercial sand blasting apparatus. Crushed glass particles were also used in the sand blasting apparatus as well as glass beads. Comparisons of the different types of erosion patterns were made. Scanning electron microscopy, surface profilometry and energy dispersive X-ray spectroscopy analysis were used to characterize erosion patterns. The nature of the wear can be divided into cutting and deformation, each with its own characteristic features. Surface chemistry analysis indicates the possibility of complex chemical and/or mechanical interactions between erodants and target materials.

Rao, P. V.↗

A study of the effect of solid particle impact and particle shape on the erosion morphology of ductile metals

Impulsive versus steady jet impingement of spherical glass bead particles on metal surfaces was studied using a gas gun facility and a commercial sand blasting apparatus. Crushed glass particles were also used in the sand blasting apparatus as well as glass beads. Comparisons of the different types of erosion patterns were made. Scanning electron microscopy, surface profilometry and energy dispersive X-ray spectroscopy analysis were used to characterize erosion patterns. The nature of the wear can be divided into cutting and deformation, each with its own characteristic features. Surface chemistry analysis indicates the possiblity of complex chemical and/or mechanical interactions between erodants and target materials.

Rao, P. V.↗

Morphology of large impact craters and basins on Venus: Implications for ring formation

A nearly complete examination of the Magellan radar data for the Venusian surface reveals 72 unequivocal peak-ring craters and 4 larger structures that we interpret to be multiringed. This report updates our earlier studies and that of the Magellan team. The general morphology of peak-ring craters, decreasing ring diameter ratio trends with increasing crater diameter, and the general size-morphology progression from complex central-peak crater to peak-ring crater on Venus and the terrestrial planets suggest similar processes of peak-ring formation. Observations are consistent with a model of dynamic collapse, downward and outward, of an unstable central peak to form a ring. We interpret the four larger ringed structures (Klenova, Lise Meitner, Mead, and Isabella) to be morphologically similar to the Orientale Basin on the Moon, and thus, true multiringed basins.

Alexopoulos, Jim S.↗

Titania Deposition on PMR-15

The formation, degree of crystallinity and adherence of dense titania (TiO2) thin film coatings on a high-temperature polyimide resin (PMR-15) can be influenced by the chemical composition of the polymer surface. Furthermore, solution deposition conditions can be adjusted to provide additional control over the morphology and crystallinity of the titania films. Recipes for solution-based titania deposition that used a slowly-hydrolyzing titanium fluoride salt in the presence of boric acid as a fluoride scavenger allowed growth of films up to 750 nm thick in 22 h. By adjusting solution pH and temperature, either amorphous titania or oriented crystalline anatase films could be formed. Surface sulfonate groups enhance the adhesion of solution-deposited oxide thin film coatings. While most sulfonation procedures severely damaged the PMR-15 surface, the use of chlorosulfonic acid followed by hydrolysis of the installed chlorosulfonyl groups provided effective surface sulfonation without significant surface damage. In some cases, the oxide deposition solution caused partial hydrolysis of the polymer surface, which itself was sufficient to allow adhesion of the titania film through chelation of titanium ions by exposed benzoic acid groups on the polymer surface.

Meador, Mary B.↗

Grooves on Phobos - Their distribution, morphology and possible origin

The global distribution, morphology, age, possible origin and significance of the long, linear depressions termed grooves on the surface of Phobos are discussed, based on Viking Orbiter data. The grooves, which consist of linear strings of coalesced and separate depressions in a loose regolith up to 100-200 m in depth, are observed to define the intersection of several sets of parallel planes with the surface of Phobos, with the widest and deepest grooves occurring just outside the rim of the 10-km crater, Stickney. The superposition of the grooves on older craters, crater density within the grooves and the intersections of groove sets suggest that the grooves are all of the same age, with their formation closely following that of Stickney. The evidence of groove morphology and distribution is used to attribute their formation to the enlargement of preexisting fractures or the formation of new fractures by the Stickney impact, causing the mobilization of the regolith along the fractures. The lack of observable grooves on Deimos is explained by the absence of a crater large enough to have severly fractured its surface.

Thomas, P.↗