Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Support Effect Studied on Thin-Film Perovskites

Some functional oxides exhibit strong support effects but typically have low surface areas and stabilities that negate the promotional effects. The primary goal of our work in the past three years was to develop high-surface-area versions of these supports by Atomic Layer Deposition onto stable supports, then use these to understand how the oxide supports affect the metal catalytic properties. The primary application targeted for these materials was methane oxidation and related reactions for emissions control. Systems of particular interest were supported, precious metals on thin-film perovskites in order to develop “intelligent” catalysts in which the metal can reversibly ex-solve from perovskite lattices. This following report lists the papers that were published with the support of this DOE grant, together with a brief summary of the results from each paper.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-Principles Characterization of Surface Phonons of Halide Perovskite CsPbI 3 and Their Role in Stabilization

The stability of halide perovskites has been a long-standing issue for their real-world application. Approaches to improve stability include nanostructuring, dimensionality reduction, and strain engineering, where surfaces play an important role in the formation of a stable structure. To understand the mechanism we compute the lattice dynamics of the surface of CsPbI 3 using density functional theory. We demonstrate, for the first time, that CsPbI 3 crystals exhibit surface phonons that are localized on the outermost layers of the slabs, and we perform a complete symmetry characterization including an identification of the Raman/IR active modes. These surface phonons are present in the optically active cubic phase but are absent in the optically inactive "yellow" phase. Furthermore, we show that the surface suppresses bulk instabilities by hardening soft modes of the bulk cubic phase, resulting in phase stabilization and quenching of dynamical disorder. Finally, this study is fundamental for understanding the structural behavior of halide perovskite materials with high surface area-to-volume ratios, and for guiding stabilization strategies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxide-catalyzed self- and cross-condensation of cycloketones. Kinetically relevant steps that determine product distribution

Metal oxides with acid-base properties can be used to catalyze aldol condensation and potentially obtain valuable chemicals from biomass-derived oxygenates. Understanding the reaction mechanisms could enable the development of effective catalysts with controllable selectivity. In this work, we investigate the reaction parameters that affect the kinetics and product distribution of self- and cross-aldol condensation of cyclopentanone (CPO) and cyclohexanone (CHO) over CeO 2 and ZrO 2 catalysts by combining detailed analysis of experiments and DFT calculations. It is well-known that either the deprotonation of an α-C–H that generates an enolate or the C–C coupling that produces the dimers can be rate-limiting step. Indeed, the detailed kinetics analysis shows that the observed data can be fitted by unimolecular or bimolecular Langmuir-Hinshelwood models. Specifically, on the ZrO 2 catalyst, the unimolecular α-C–H activation is the rate limiting step for the CPO self-condensation, while the bimolecular C–C coupling limits the CHO self-condensation. By contrast, on CeO 2 , the bimolecular C–C coupling step seems to be rate-limiting for both CPO and CHO self-condensation reactions. The adsorption parameters derived from kinetics fitting indicate that when the two reactants are co-fed, the surface is preferentially covered by CHO. So, the condensation rate of [CPO]-activated products ([CPO]CPO + [CPO]CHO) decreases in the presence of CHO, due to the competitive adsorption. However, despite a higher surface coverage, CHO is not an effective electrophile because it imposes stronger steric constraints to the formation of the C–C bond than CPO. Therefore, for a given enolate, the product distribution shows that [CPO]CPO > [CPO]CHO and, similarly [CHO]CPO > [CHO]CHO. Likewise, the yields of [CPO]- and [CHO]-activated products in mixed CPO/CHO feeds are similar because the higher surface coverage and stability of the [CHO] enolate is counterbalanced by the inhibition of C–C coupling by steric constraints when CHO is involved. In summary, the overall rank of products observed experimentally can be explained in terms of a combination of the following effects: relative surface coverage of the reactants, steric constraints for the C–C coupling, stability of the enolate, and effectiveness of the electrophile to accept an electron.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, characterization and properties of L-arginine-passivated silver nanocolloids

We investigate the effect of L-arginine-surface passivation on localised surface plasmon resonance (LSPR), size and stability of colloidal Silver Nanoparticles (AgNPs) synthesized by chemical reduction method. The surface Plasmon resonance absorption peak of AgNPs shows blue shift with the increase in L-arginine concentration. Transmission electron microscopy (TEM) analysis confirmed that the average size of AgNPs reduces from 10 nm to 6 nm as the concentration of L-Arginine increased from 1 to 5 mM. The X-ray diffraction study (XRD) confirmed the formation face-centred cubic (fcc) structured AgNPs. FT-IR studies revealed strong bonding between L-arginine functional groups and AgNPs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The interaction of acetonitrile with H-terminated and depassivated (100) diamond surfaces

Molecular adsorption on reactive semiconductor surfaces may enable novel surface functionalisation and atomically-precise dopant formation. In this work synchrotron-based x-ray photoelectron spectroscopy and near edge x-ray absorption spectroscopy are used to examine the interaction between acetonitrile and diamond (100) surfaces under ultrahigh vacuum (UHV) conditions. We observe two surface-bound nitrogen species on hydrogen terminated surfaces after thermal depassivation or following synchrotron radiation and subsequent exposure to acetonitrile, but find no evidence of nitrogen adsorption on the hydrogen-terminated diamond surface, at room temperature. Subsequent measurements explore the stability of the surface-bound nitrogen under various temperature conditions and with atmospheric exposure. While the nitrogen coverage achieved in this study is low, this study serves as a proof-of-concept demonstration of a UHV molecular dosing approach to selective nitrogen functionalisation of diamond surfaces as an alternative to plasma-based approaches. This development may be critical for proposed surface-based fabrication workflows using atomic placement of nitrogen-vacancy centres to create quantum devices.

74 ATOMIC AND MOLECULAR PHYSICS↗

Measurement of anode surface temperature in carbon nanomaterial production by arc discharge method

Highlights: • We measured the temperature of anode surface by two-color pyrometry combined with a high speed camera successfully. • Growth temperature of pyrolytic graphite, MWNTs, and nano-graphite particles were in ranges of 2400–2600 K, 2600–2700 K, and 2700–3500 K, respectively. • High temperature contributes to form thermodynamically unstable material. - Abstract: Nano-graphite particles, multi-wall carbon nanotube (MWNT), and pyrolytic graphite were prepared at different positions of the anode surface in an arc discharge. Graphite electrodes were employed for the arc discharge under helium environment at atmospheric pressure. Nano-sized carbon products were characterized by scanning electron microscopy and transmission electron microscopy. During the arc discharge, two-color pyrometry combined with a high-speed camera was conducted to measure the temperature distribution of the anode surface. The growth temperature of pyrolytic graphite, MWNT, and nano-graphite particles were in the ranges of 2400–2600 K, 2600–2700 K, and 2700–3500 K, respectively. The local temperature of anode surface is a critical parameter to determine the products with different morphologies. The formation mechanism of these carbon nanomaterials is suggested based on the local temperature of anode surface and their thermodynamic stability.

36 MATERIALS SCIENCE↗

Passivation of Germanium by Graphene for Stable Graphene/Germanium Heterostructure Devices

The scalable integration of graphene onto semiconductor platforms is an important step towards utilizing the exceptional structural, electronic, thermal, and mechanical properties of graphene in state-of-the-art technologies. Specifically, graphene films grown on Ge are an exciting materials system for high-performance electronics; however, the device performance depends sensitively on the structural, electronic, and chemical nature of the graphene/Ge interface. We have recently discovered that graphene grown directly on Ge via chemical vapor deposition (CVD) can passivate the Ge surface, preventing its oxidation for months—longer than alternate passivation methods reported in the literature. Yet, the factors that govern passivation are not understood. Here, we elucidate how the CVD growth conditions and Ge surface orientation affect Ge oxidation below graphene. We find that growing graphene with a high H2:CH4 flux ratio minimizes formation of defects in graphene, enhancing Ge passivation. While minimizing defects is important, surprisingly, we find that passivation depends much stronger on the Ge surface orientation. These results provide a route for the integration of graphene films with a pristine graphene/substrate interface on Ge, an important step towards stabilizing the Ge surface and realizing graphene-based or hybrid graphene/Ge heterostructure devices integrated directly on conventional semiconductor wafers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Unraveling the Surface Termination and Evolution of Surface States for Electrocatalyst PtSn 4 in Alkaline HER

Semimetal PtSn 4 has been experimentally demonstrated as a promising topological electrocatalyst for the hydrogen evolution reaction (HER) under both acidic and alkaline conditions. While two possible mechanisms have been proposed to explain its activity, the role of its surface states in HER remains unclear. It is indeed in question how the surface states of this alloy evolve as HER proceeds. In this study, we investigate the surface termination that sustains conducting surface states on PtSn 4 , and we track their evolution during HER catalysis. We show that a reconstructed surface with a Sn-poor termination reproduces the scanning tunneling microscopy pattern observed in experiments and sustains a conducting surface. Through phase diagram and geometric structure analysis, we outline the HER profile following the Volmer–Heyrovsky mechanism. As hydrogen atoms adsorb onto the surface, the structure undergoes further reconstruction to an equilibrium phase with a coverage of two hydrides per unit cell. Meanwhile, the surface electronic bands evolve in response to interactions with the adsorbed hydrogen atoms. A hybridization diagram is further proposed for understanding the surface state evolution based on wave function and chemical bonding analyses. While the Pt atoms serve as conventional sites for hydrogen binding, the surface states of PtSn 4 are essential for stabilizing the hydrogen antibonding states via in-phase electronic interactions with the Sn components. This stabilization results in frontier surface bands that are responsible for driving the HER catalysis. Here, our findings provide a detailed description for the direct involvement of surface states on PtSn4 when employed as a catalyst for HER.

catalysts↗

Temporal Characteristics of Cloud Radiative Effects on the Greenland Ice Sheet: Discoveries From Multiyear Automatic Weather Station Measurements

The impact of clouds on Greenland's surface melt is difficult to quantify due to the limited amount of in situ observations. To better quantify cloud radiative effects (CRE), we utilize 29 automatic weather stations and provide the first analysis on seasonal and hourly timescales in both accumulation and ablation zones. Seasonal CRE shows opposing cycles across geographical regions. CRE generally increases during melt season in the north of Greenland, mainly due to longwave CRE enhancement by cloud fraction and liquid water. CRE decreases from May to July and increases afterwards in the middle and south of Greenland, mainly due to strengthened shortwave CRE caused by surface albedo reduction. This finding resolves the contrasting seasonal distributions in previous studies at different Arctic locations. Longwave seasonal cycle also shifts from increasing in the north to decreasing in the south, implying spatial variations in cloud and atmospheric conditions. On hourly timescales, longwave downwelling radiation exhibits a bimodal distribution peaking at ~-70 W/m 2 (i.e., clear state) and ~0 W/m 2 (i.e., cloudy state), suggesting that Greenland alternates between fairly clear and overcast. In the cloudy state, CRE strongly correlates with the combined influence of solar zenith angle and albedo (r = 0.85, p < 0.01) probably because clouds are thick enough for CRE to become saturated. The close relationship between CRE and albedo over dark surfaces suggests a stabilizing feedback: Net CRE is negative at low albedo caused by snow melt and snow metamorphism and thus tends to increase albedo and decelerate surface melt.

54 ENVIRONMENTAL SCIENCES↗

Moment mapping of body-centered-cubic Fe{sub x}Mn{sub 1−x} alloy films on MgO(001)

The alloy composition and elemental magnetic moments of bcc single crystal films of compositionally graded Fe{sub x}Mn{sub 1−x} films (20 nm thick films with 0.8 ≤ x ≤ 0.9) grown on MgO(001) are spatially mapped using X-ray absorption spectroscopy and magnetic circular dichroism. Electron diffraction measurements on single composition samples confirmed that the structure of Fe{sub x}Mn{sub 1−x} films remained epitaxial and in the bcc phase from 0.65 ≤ x ≤ 1, but rotated 45° with respect to the MgO(001) surface net. This is beyond the bulk bcc stability limit of x = 0.88. The Fe moment is found to gradually reduce with increasing Mn content with a very abrupt decline at x = 0.85, a slightly higher composition than observed in the bulk. Surprisingly, the Mn exhibits a very small net moment (<0.1 μ{sub B}) at all compositions, suggesting a complex Mn spin structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fundamental mass-spin-morphology relation of spiral galaxies

This work presents high-precision measurements of the specific baryon angular momentum j {sub b} contained in stars, atomic gas, and molecular gas, out to ≳ 10 scale radii, in 16 nearby spiral galaxies of the THINGS sample. The accuracy of these measurements improves on existing studies by an order of magnitude, leading to the discovery of a strong correlation between the baryon mass M {sub b}, j {sub b}, and the bulge mass fraction β, fitted by β=−(0.34±0.03) lg (j{sub b}M{sub b}{sup −1}/[10{sup −7} kpc km s{sup −1} M{sub ⊙}{sup −1}])−(0.04±0.01) on the full sample range of 0 ≤ β ≲ 0.3 and 10{sup 9} M {sub ☉} < M {sub b} < 10{sup 11} M {sub ☉}. The corresponding relation for the stellar quantities M {sub *} and j {sub *} is identical within the uncertainties. These M-j-β relations likely originate from the proportionality between jM {sup –1} and the surface density of the disk that dictates its stability against (pseudo-)bulge formation. Using a cold dark matter model, we can approximately explain classical scaling relations, such as the fundamental plane of spiral galaxies, the Tully-Fisher relation, and the mass-size relation, in terms of the M-j(-β) relation. These results advocate the use of mass and angular momentum as the most fundamental quantities of spiral galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Synthesis of water soluble glycine capped silver nanoparticles and their surface selective interaction

Highlights: • Synthesis of water soluble silver nanoparticles at ambient reaction conditions. • Glycine as stabilizing agent for silver nanoparticles. • Surface selective interaction of glycine with silver nanoparticles. • Glycine concentration influences crystalinity and optical property of silver nanoparticles. - Abstract: Synthesis of biocompatible metal nanoparticles has been an area of significant interest because of their wide range of applications. In the present study, we have successfully synthesized water soluble silver nanoparticles assisted by small amino acid glycine. The method is primarily based on reduction of AgNO{sub 3} with NaBH{sub 4} in aqueous solution under atmospheric air in the presence of glycine. UV–vis spectroscopy, transmission electron microscopy (TEM), X–ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, thermogravimetry (TG) and differential thermal analysis (DTA) techniques used for characterization of resulting silver nanoparticles demonstrated that, glycine is an effective capping agent to stabilize silver nanoparticles. Surface selective interaction of glycine on (1 1 1) face of silver nanoparticles has been investigated. The optical property and crystalline behavior of silver nanoparticles were found to be sensitive to concentration of glycine. X–ray diffraction studies ascertained the phase specific interaction of glycine on silver nanoparticles. Silver nanoparticles synthesized were of diameter 60 nm. We thus demonstrated an efficient synthetic method for synthesis of water soluble silver nanoparticles capped by amino acid under mild reaction conditions with excellent reproducibility.

36 MATERIALS SCIENCE↗

Reconstruction-stabilized epitaxy of LaCoO 3 /SrTiO 3 (111) heterostructures by pulsed laser deposition

Unlike widely explored complex oxide heterostructures grown along [001], the study of [111]-oriented heterointerfaces is very limited thus far. One of the main challenges is to overcome the polar discontinuity that hinders the epitaxy of atomically sharp interfaces. Here, by taking LaCoO 3 /SrTiO 3 (111) as a prototype, we show that the reconstruction, which effectively compensates the surface polarity, can stabilize the epitaxy of the heterostructure with polar discontinuity. A reconstructed substrate surface is prepared, while the growth is controlled to form reconstruction on the film surface. To suppress the chemical diffusion across the interface, the growth is interrupted between each unit cell layer to allow the lattice relaxation at a lowered temperature. In this way, high quality two-dimensional growth is realized and the heterointerfaces exhibit sharpness at the atomic scale. As a result, our work provides a path to precisely control the growth of complex oxide heterostructures along polar orientations that exhibit emergent quantum phenomena.

36 MATERIALS SCIENCE↗

Adsorption and Formation of BaO Overlayers on Gamma-Al2O3 Surfaces

First-principles density functional theory slab calculations were used to investigate adsorption, clustering and overlayer formation of BaO on the gamma-Al2O3 surfaces. Multiple stable adsorption configurations were identified for the adsorbed BaO molecule and (BaO)2 on both (100) and (110) surfaces of gamma-Al2O3. Adsorption of BaO and (BaO)2 induces significant relaxation of the gamma-Al2O3 surfaces. At high BaO coverage, up to the ratio of BaO units to surface Al atoms being unity, the adsorbed BaO molecules were organized to form a buckled monolayer-like overlayer on the surface. Aggregation energy was used to characterize the organization of adsorbed BaO on the surface. Our results showed that the initial BaO adsorption configuration had a strong effect on clustering and overlayer formation. A weakly adsorbed BaO molecule will thermodynamically favor clustering over being isolated. On the fully dehydrated gamma-Al2O3(100) surface, the formation of BaO overlayer was thermodynamically unfavorable until 4.26 BaO/nm2 if the additional BaO was from the most stable site, corresponding to a low BaO loading, whereas aggregation became favorable if the additional BaO was from less stable sites, corresponding to a high BaO loading. On the fully dehydrated gamma-Al2O3(110) surface, the formation of a BaO dimer was found to have the highest energy cost. On the other hand, the presence of hydroxyls on the surface enhances the stability of the adsorbed BaO molecules. As such, isolated BaO islands, rather than a complete BaO overlayer, were expected on the hydroxylated gamma-Al2O3 surfaces, consistent with recent experimental observations. Pacific Northwest National Laboratory operated by Battelle for the U. S. Department of Energy.

36 MATERIALS SCIENCE↗

Fundamental understanding of oxygen reduction and reaction behavior and developing high performance and stable hetero-structured cathodes

New unique hetero-structured cathode has been developed in this project. La 2 NiO 4+δ (LNO) as a surface catalyst with interstitial oxygen defects was introduced onto the state-of-the-art (La 0.6 Sr 0.4 ) 0.95 Co 0.2 Fe 0.8 O 3-δ (LSCF) cathode to enhance the surface-limited ORR kinetics on SOFC cathode. Furthermore, the hetero-structured cathode surface maintains high activity under electrode polarization with much less negative effects from surface cation segregation of Sr, which is known to cause degradation issues for conventional LSCF and LSC cathodes, thus improving the cathode long-term stability. The interface chemistry distribution and oxygen transport properties have been studied to prove the enhancement of power out and stability of LNO-infiltrated LSCF cathode. The further investigation demonstrates that CeO 2 & La 2-x NiO 4+δ (x=0-0.2) co-infiltration is a simple and cost-effective method to improve both performance and stability of LSCF cathode by limiting nano-particles growth/delamination and further improve the surface stability. For the first time, a physical model is proposed to illustrate how unique interstitial species on hetero-structured cathode surface work to regulate the exchange rate of the incorporation reaction. Meanwhile, fundamental investigation of the surface oxygen exchange and bulk oxygen transport properties under over-potential conditions across cathode materials have been carried out in this project, which were discussed and compared to the Nernst equation that is generally applied to treat any oxide electrodes under equilibrium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational Investigation of FeS2 Surfaces and Prediction of Effects of Sulfur Environment on Stabilities

Density functional theory calculations were employed to investigate the (001), (210), (III), and (110) surfaces of, F~S2' The surface free ene:gies were calculated in equilibrium with a sulfur environment using firstpnnclples based thermodynamics approach. Surfaces that feature metal atoms in their outermost layer are predicted to be higher m energy. Wlthm the studied subset of (I x I) terminations, the stoichiometric (001) surface termmated by a layer of sulfur atoms is the most stable for sulfur-lean condition. For increasingly sulfur-nch enVIronment, two structures were found to have notably lower surface energies compared to others. They have (210) and (Ill) orientation, both terminated by layers of sulfur. Interestingly, these surfaces are nonstoichiometric exhibiting an excess of sulfur atoms.

Alfonso, D R↗

Voltage and Temperature Limits of Advanced Electrolytes for Lithium-Metal Batteries

Several advanced electrolytes (mainly ether-based) have recently demonstrated excellent electrochemical performance in high energy density lithium (Li)-metal batteries. However, the safety of these ether-based electrolytes is still unknown. This work evaluates the thermal stability of these new formulations to understand their safety limits of operation in comparison to carbonate electrolytes typically used in Li-ion batteries. Electrolyte stability is assessed in conjunction with LiNi 0.8 Mn 0.1 Co 0.1 O 2 cathode and Li-metal anode at ultra-high voltages (≤ 4.8 V) and temperatures (≤ 300°C) to trigger thermal runaway, where onset and extent of heat release are monitored via isothermal microcalorimetry and differential scanning calorimetry Most ether-based electrolytes show improved thermal resilience over commercial carbonate formulations when heated up to 300°C. The thermal behavior in presence of charged cathode and Li-metal suggests that the new electrolytes may be better at stabilizing active material surfaces than carbonate electrolytes. Although extreme voltages severely destabilize the ether-based formulations, prompting thermal runaway, a phosphate based localized high concentration electrolyte exhibits superior stability over commercial carbonate electrolytes at all tested temperatures (32°C, 45°C, and 60°C). Although thermal analysis during the first charge process (as adopted in this preliminary study) may be insufficient to conclude the long-term advantages of these electrolytes, a more stable electrolyte identified under extreme voltage and temperature conditions will provide valuable guidance for the safety of future electrolyte designs.

25 ENERGY STORAGE↗