Search NASA⌕ Search

SEARCH · Search NASA

Results for “three dimensional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Cultured High-Fidelity Three-Dimensional Human Urogenital Tract Carcinomas and Process

Artificial high-fidelity three-dimensional human urogenital tract carcinomas are propagated under in vitro-microgravity conditions from carcinoma cells. Artificial high-fidelity three-dimensional human urogenital tract carcinomas are also propagated from a coculture of normal urogenital tract cells inoculated with carcinoma cells. The microgravity culture conditions may be microgravity or simulated microgravity created in a horizontal rotating wall culture vessel.

Goodwin, Thomas J.↗

Development of three-dimensional code for the analysis of jet mixing problem. Part 1: Laminar solution

Future aircraft will eventually feature nonaxisymmetric or rectangular nozzles. Developing a three-dimensional code to stimulate the characteristics of the jet exhaust plume, issuing from nonaxisymmetric nozzles, in general, at different flight conditions, is very important. Two three-dimensional codes were developed to simulate the shock-cell structure of circular nozzles. These codes were developed to solve the parabolized and simplified Navier-Stokes equations respectively. Both codes are based on a method previously developed by Newsome et al. These codes are fully vectorized on the VPS 32 at NASA Langley Research Center. The axisymmetric underexpanded supersonic jet flow problem, exhausting into still air, was used as a test case for developing an efficient three-dimensional problems and preserving crossplane symmetry of the flow downstream of the jet exit.

Abdol-Hamid, Khaled S.↗

Pathogen Propagation in Cultured Three-Dimensional Tissue Mass

A process for propagating a pathogen in a three-dimensional tissue mass cultured at microgravity conditions in a culture vessel containing culture media and a culture matrix is provided. The three-dimensional tissue mass is inoculated with a pathogen and pathogen replication in the cells of the tissue mass achieved.

Thomas J Goodwin↗

Pathogen propagation in cultured three-dimensional tissue mass

A process for propagating a pathogen in a three-dimensional tissue mass cultured at microgravity conditions in a culture vessel containing culture media and a culture matrix is provided. The three-dimensional tissue mass is inoculated with a pathogen and pathogen replication in the cells of the tissue mass achieved.

Goodwin, Thomas J.↗

THREE-DIMENSIONAL STRUCTURE OF SOLAR WIND TURBULENCE

We present a measurement of the scale-dependent, three-dimensional structure of the magnetic field fluctuations in inertial range solar wind turbulence with respect to a local, physically motivated coordinate system. The Alfvenic fluctuations are three-dimensionally anisotropic, with the sense of this anisotropy varying from large to small scales. At the outer scale, the magnetic field correlations are longest in the local fluctuation direction, consistent with Alfven waves. At the proton gyroscale, they are longest along the local mean field direction and shortest in the direction perpendicular to the local mean field and the local field fluctuation. The compressive fluctuations are highly elongated along the local mean field direction, although axially symmetric perpendicular to it. Their large anisotropy may explain why they are not heavily damped in the solar wind.

79 ASTRONOMY AND ASTROPHYSICS↗

Three-dimensional model and simulation of vacuum arcs under axial magnetic fields

In this paper, a three-dimensional (3d) magneto-hydro-dynamic (MHD) model of axial magnetic field vacuum arcs (AMFVAs) is established. Based on this model, AMFVAs are simulated and analyzed. Three-dimensional spatial distributions of many important plasma parameters and electric characteristics in AMFVAs can be obtained, such as ion number density, ion temperature, electron temperature, plasma pressure, current densities along different directions (x, y, and z), ion velocities along different directions, electric fields strength along different directions, and so on. Simulation results show that there exist significant spiral-shaped rotational phenomena in the AMFVAs, this kind of rotational phenomenon also can be verified by the many related experiments (AMFVAs photographs, especially for stronger AMF strength). For current simulation results of AMFVAs, the maximal rotational velocity at anode side is about 1100 m/s. Radial electric field is increased from arc center to arc edge; axial electric field is decreased from cathode side to anode side. Radial electric field at arc edge can be larger than axial electric field. Azimuthal electric field in most regions is much smaller than radial and axial electric field, but it can reach about 1.19 kV/m. Radial magnetic field is the smallest one compared with other components, it reaches to maximum value at the position near to anode, it can influence arc characteristics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Three-dimensional boundary layers approaching separation

The theory of semi-similar solutions of the laminar boundary layer equations is applied to several flows in which the boundary layer approaches a three-dimensional separation line. The solutions obtained are used to deduce the nature of three-dimensional separation. It is shown that in these cases separation is of the "ordinary" type. A solution is also presented for a case in which a vortex is embedded within the three-dimensional boundary layer.

Williams, J. C., III↗

Description of a FORTRAN subroutine for plotting three-dimensional data

A FORTRAN subroutine is described which provides the capability to plot three-dimensional data on an interactive cathode-ray-tube computer terminal or conventional plotter. The plotted data, which must be described in terms of a series of two-dimensional curves, appeared to form a surface in three-dimensional space. Features are included of the subroutine's capability for hidden-line computations. User instructions and sample programs are described.

James, M. R.↗

The load separation technique in the elastic-plastic fracture analysis of two- and three-dimensional geometries

Load separation is the representation of the load in the test records of geometries containing cracks as a multiplication of two separate functions: a crack geometry function and a material deformation function. Load separation is demonstrated in the test records of several two-dimensional geometries such as compact tension geometry, single edge notched bend geometry, and center cracked tension geometry and three-dimensional geometries such as semi-elliptical surface crack. The role of load separation in the evaluation of the fracture parameter J-integral and the associated factor eta for two-dimensional geometries is discussed. The paper also discusses the theoretical basis and the procedure for using load separation as a simplified yet accurate approach for plastic J evaluation in semi-elliptical surface crack which is a three-dimensional geometry. The experimental evaluation of J, and particularly J(sub pl), for three-dimensional geometries is very challenging. A few approaches have been developed in this regard and they are either complex or very approximate. The paper also presents the load separation as a mean to identify the blunting and crack growth regions in the experimental test records of precracked specimens. Finally, load separation as a methodology in elastic-plastic fracture mechanics is presented.

Sharobeam, Monir H.↗

Three dimensional CSCM method for the compressible Navier-Stokes equations with application to a multi-nozzle exhaust flowfield

The effective design of three-dimensional flow systems such as a clustered multinozzle shrouded exhaust system requires detailed analysis of the internal flowfield. It is pointed out that new numerical techniques on the most modern vector computers are making these analyses practicable. In this paper, the upwind differenced implicit conservative supracharacteristics method (CSCM) for three-dimensional viscous flow is presented. The new method is an implicit 'method of planes' symmetric Gauss-Seidel relaxation scheme. The data is conveniently stored on successive planes along the streamwise coordinate, and the system of equations is solved twice in each successive plane of the streamwise coordinate. The developed new three-dimensional compressible Navier-Stokes algorithm combines the best features of the storage and computationally efficient space marching procedures with the generality of time dependent techniques to solve flows with elliptic and streamwise separated flows.

Bardina, J.↗

THREE-DIMENSIONAL STRUCTURE AND EVOLUTION OF EXTREME-ULTRAVIOLET BRIGHT POINTS OBSERVED BY STEREO/SECCHI/EUVI

We unveil the three-dimensional structure of quiet-Sun EUV bright points and their temporal evolution by applying a triangulation method to time series of images taken by SECCHI/EUVI on board the STEREO twin spacecraft. For this study we examine the heights and lengths as the components of the three-dimensional structure of EUV bright points and their temporal evolutions. Among them we present three bright points which show three distinct changes in the height and length: decreasing, increasing, and steady. We show that the three distinct changes are consistent with the motions (converging, diverging, and shearing, respectively) of their photospheric magnetic flux concentrations. Both growth and shrinkage of the magnetic fluxes occur during their lifetimes and they are dominant in the initial and later phases, respectively. They are all multi-temperature loop systems which have hot loops ({approx}10{sup 6.2} K) overlying cooler ones ({approx}10{sup 6.0} K) with cool legs ({approx}10{sup 4.9} K) during their whole evolutionary histories. Our results imply that the multi-thermal loop system is a general character of EUV bright points. We conclude that EUV bright points are flaring loops formed by magnetic reconnection and their geometry may represent the reconnected magnetic field lines rather than the separator field lines.

79 ASTRONOMY AND ASTROPHYSICS↗

Collisional phase shifts between two colliding solitary waves in a three-dimensional magnetized dusty plasma

Interaction of dust acoustic solitary waves in two different directions in a three-dimensional dusty plasma is investigated. The phase shifts after collision of two solitary waves with arbitrary angle in a three-dimensional magnetized dusty plasma are studied. By using the extended Poincare-Lighthill-Kuo perturbation method, two Korteweg-de Vries equations for nonlinear waves in both {xi} and {eta} directions are obtained. The effects of the collision angle {theta}, the ratio of dust temperature to ion temperature {sigma}, the ratio of ion temperature to electron temperature {beta}, the ratio of effective temperature to ion temperature s, and the ratio of the number densities of both ion and electron to the density of dust particles {mu} and {nu} on the phase shifts are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Three-dimensional profilometry using a Dammann grating

We propose three-dimensional (3D) profilometry based on a Fourier transform in which a two-dimensional (2D) Dammann grating and a cylindrical lens are used to generate structured light. The Dammann grating splits most of the illumination power into a 2D diffractive spot matrix. The cylindrical lens transforms these 2D diffractive spots into one-dimensional fringe lines that are projected on an object. The produced projection fringes have the advantages of high brightness and high contrast and compression ratios. The experiments have verified the proposed 3D profilometry. The 3D profilometry using Dammann grating should be of high interest for practical applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Finite element solution of turbulent and reacting compressible three-dimensional flows

Results of detailed numerical evaluation of turbulent and reacting three-dimensional compressible flows are presented. These solutions were obtained using a finite element algorithm to solve the system of explicitly non-linear partial differential equations governing three-dimensional, confined unidirectional turbulent flow of a compressible, reacting fluid. Assessments are made of solution accuracy and convergence, including detailed comparisons to experimental data.

Baker, A. J.↗

Lift distribution and velocity field measurements for a three-dimensional, steady blade/vortex interaction

A wind tunnel experiment simulating a steady three-dimensional helicopter rotor blade/vortex interaction is reported. The experimental configuration consisted of a vertical semispan vortex-generating wing, mounted upstream of a horizontal semispan rotor blade airfoil. A three-dimensional laser velocimeter was used to measure the velocity field in the region of the blade. Sectional lift coefficients were calculated by integrating the velocity field to obtain the bound vorticity. Total lift values, obtained by using an internal strain-gauge balance, verified the laser velocimeter data. Parametric variations of vortex strength, rotor blade angle of attack, and vortex position relative to the rotor blade were explored. These data are reported (with attention to experimental limitations) to provide a dataset for the validation of analytical work.

Dunagan, Stephen E.↗

([M(NH{sub 3}){sub 6}][Ag{sub 4}M{sub 4}Sn{sub 3}Se{sub 13}]){sub ∞} (M=Zn, Mn): Three-dimensional chalcogenide frameworks constructed from quaternary metal selenide clusters with two different transition metals

Herein we report solvothermal syntheses of two new three-dimensional chalcogenide frameworks ([M(NH{sub 3}){sub 6}][Ag{sub 4}M{sub 4}Sn{sub 3}Se{sub 13}]){sub n} (M=Zn (1), Mn (2)), which consist of quaternary metal selenide clusters with two different transition metals. The compounds represent the first Ag–Zn/Mn–Sn–Se based quaternary anionic frameworks. The optical studies show that the band gaps for 1 and 2 are 2.09 eV and 1.71 eV, respectively. Moreover, the photoelectrochemical study indicates that compound 1 displays n-type semiconducting behaviour and is photoactive under visible light illumination (λ>400 nm). - Graphical abstract: Two 3D framework selenides, [M(NH{sub 3}){sub 6}][Ag{sub 4}M{sub 4}Sn{sub 3}Se{sub 13}] (M=Zn (1), Mn (2)), constructed from quaternary metal selenide clusters, have been solvothermally synthesized and are photoactive under visible light illumination. - Highlights: • Two new three-dimensional selenide frameworks. • Quaternary metal selenide clusters with two different transition metals. • Photoelectrochemical study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the Solution of the Three-Dimensional Flowfield About a Flow-Through Nacelle

The solution of the three dimensional flow field for a flow through nacelle was studied. Both inviscid and viscous inviscid interacting solutions were examined. Inviscid solutions were obtained with two different computational procedures for solving the three dimensional Euler equations. The first procedure employs an alternating direction implicit numerical algorithm, and required the development of a complete computational model for the nacelle problem. The second computational technique employs a fourth order Runge-Kutta numerical algorithm which was modified to fit the nacelle problem. Viscous effects on the flow field were evaluated with a viscous inviscid interacting computational model. This model was constructed by coupling the explicit Euler solution procedure with a flag entrainment boundary layer solution procedure in a global iteration scheme. The computational techniques were used to compute the flow field for a long duct turbofan engine nacelle at free stream Mach numbers of 0.80 and 0.94 and angles of attack of 0 and 4 deg.

Compton, William Bernard↗

Three-dimensional vector electrochemical strain microscopy

Three-dimensional vector imaging of bias-induced displacements of surfaces of ionically conductive materials using electrochemical strain microscopy (ESM) is demonstrated for model polycrystalline LiCoO2surface. We demonstrate that resonance enhanced imaging using band excitation detection can be performed both for out-of-plane and in-plane response components at flexural and torsional resonances of the cantilever, respectively. The image formation mechanism in vector ESM is analyzed and relationship between measured signal and grain orientation is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗