Search NASA⌕ Search

SEARCH · Search NASA

Results for “vortex generators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

The structure of the vorticity field in turbulent channel flow. I - Analysis of instantaneous fields and statistical correlations

An investigation into the existence of hairpin vortices in turbulent channel flow is conducted using a database generated by the large eddy simulation technique. It is shown that away from the wall the distribution of the inclination angle of vorticity vector attains its maximum at about 45 deg to the wall. Two point correlations of velocity and vorticity fluctuations strongly support a flow model consisting of vortical structures inclined at 45 deg to the wall. The instantaneous vorticity vectors plotted in planes inclined at 45 deg show that the flow contains an appreciable number of hairpins. Vortex lines are used to display the three dimensional structure of hairpins, which are shown to be generated from deformation of transverse vortex filaments.

Moin, P.↗
NASA NTRS1995

Incompressible Navier-Stokes Simulation Procedure for a Wingtip Vortex Flow Analysis

The pacing items to reach the highly desirable goal of obtaining computationally accurate flow simulation of a wingtip vortex include; super-computer development, solver accuracy, grid generation and turbulence modeling. In these four areas, many advances have been made but the fact remains that most wing computations are, at best, five percent accurate (in drag coefficient, for example). This level of accuracy has been sufficient for many purposes such as airfoil design, rudimentary wing design, and some forms of optimization. However, this accuracy level will not allow commercial aircraft designers to extract the remaining few percent of efficiency theoretically possible for conventional aircraft configurations. Thus further research is needed, particularly in the areas of solver development and turbulence modeling, to advance the state of the art of viscous computational techniques as applied to problems in aerodynamics. During the course of this study, a substantial amount of measured and computed results have been acquired. In this paper, only a small selection of experimental and computational results will be presented. This paper will outline and discuss a simulation procedure for a wingtip vortex flow analysis using the method of artificial compressibility to solve the three-dimensional, incompressible, Navier-Stokes equations (INS3D-UP).

Jennifer Dacles-Mariani↗
NASA NTRS1990

Computation of rotor aerodynamic loads in forward flight using a full-span free wake analysis

The development of an advanced computational analysis of unsteady aerodynamic loads on isolated helicopter rotors in forward flight is described. The primary technical focus of the development was the implementation of a freely distorting filamentary wake model composed of curved vortex elements laid out along contours of constant vortex sheet strength in the wake. This model captures the wake generated by the full span of each rotor blade and makes possible a unified treatment of the shed and trailed vorticity in the wake. This wake model was coupled to a modal analysis of the rotor blade dynamics and a vortex lattice treatment of the aerodynamic loads to produce a comprehensive model for rotor performance and air loads in forward flight dubbed RotorCRAFT (Computation of Rotor Aerodynamics in Forward Flight). The technical background on the major components of this analysis are discussed and the correlation of predictions of performance, trim, and unsteady air loads with experimental data from several representative rotor configurations is examined. The primary conclusions of this study are that the RotorCRAFT analysis correlates well with measured loads on a variety of configurations and that application of the full span free wake model is required to capture several important features of the vibratory loading on rotor blades in forward flight.

Quackenbush, Todd R.↗
NASA NTRS1985

Vortex sheet modeling with higher order curved panels

A numerical technique is presented for modeling the vortex sheet with a deformable surface definition, along which a continuous vortex strength distribution in the spanwise direction is applied, so that by repeatedly modifying its shape, its true configuration is approached, in the proximity of its generating wing. Design problems requiring the inclusion of a realistic configuration of the vortex sheet are numerous. Examples discussed include: control effectiveness and stability derivatives, longitudinal stability, lateral stability, canards, propellers and helicopter rotors, and trailing vortex hazards.

Nagati, M. G.↗
NASA NTRS1993

Stretch-induced quenching in flame-vortex interactions

The flame-vortex interaction problem is a natural configuration in which several issues relevant to turbulent combustion can be addressed: effect of strain-rate and curvature, effect of the Lewis number, effect of heat losses, effect of complex chemistry, and flame-generated turbulence. In such an approach, the interaction of an isolated vortex with a laminar premixed flame is viewed as a unit process of a turbulent premixed flame in which the reaction zone keeps a laminar like structure locally; this is precisely the case of the wrinkled flame or flamelet regime in turbulent combustion. The present work complements previous studies and involves the study of the interaction of a vortex pair and a laminar premixed flame in a planar two-dimensional geometry, together with numerical simulations. This geometry is quite unique since most studies have considered axisymmetric vortex rings. Such a geometry offers several advantages over previous studies.

Samaniego, J.-M.↗
NASA NTRS1977

Investigation of compressible vortex flow characteristics

The nature of intense air vortices was studied and the factors which determine the intensity and rate of decay of both single and pairs of vortices were investigated. Vortex parameters of axial pressure differential, circulation, outflow rates, separation distance and directions of rotation were varied. Unconfined vortices, generated by a single rotating cage, were intensified by an increasing axial pressure gradient. Breakdown occurred when the axial gradient became negligible. The core radius was a function of the axial gradient. Dual vortices, generated by two counterrotating cages, rotated opposite to the attached cages. With minimum spacing only one vortex was formed which rotated in a direction opposite to the attached cage. When one cage rotated at half the speed of the other cage, one vortex formed at the higher speed cage rotating in the cage direction.

Muirhead, V. U.↗
NASA NTRS2015

Simulation of Wake Vortex Radiometric Detection via Jet Exhaust Proxy

This paper describes an analysis of the potential of an airborne hyperspectral imaging IR instrument to infer wake vortices via turbine jet exhaust as a proxy. The goal was to determine the requirements for an imaging spectrometer or radiometer to effectively detect the exhaust plume, and by inference, the location of the wake vortices. The effort examines the gas spectroscopy of the various major constituents of turbine jet exhaust and their contributions to the modeled detectable radiance. Initially, a theoretical analysis of wake vortex proxy detection by thermal radiation was realized in a series of simulations. The first stage used the SLAB plume model to simulate turbine jet exhaust plume characteristics, including exhaust gas transport dynamics and concentrations. The second stage used these plume characteristics as input to the Line By Line Radiative Transfer Model (LBLRTM) to simulate responses from both an imaging IR hyperspectral spectrometer or radiometer. These numerical simulations generated thermal imagery that was compared with previously reported wake vortex temperature data. This research is a continuation of an effort to specify the requirements for an imaging IR spectrometer or radiometer to make wake vortex measurements. Results of the two-stage simulation will be reported, including instrument specifications for wake vortex thermal detection. These results will be compared with previously reported results for IR imaging spectrometer performance.

Daniels, Taumi S.↗
NASA NTRS1990

Prediction of forces and moments for flight vehicle control effectors. Part 2: An analysis of delta wing aerodynamic control effectiveness in ground effect

Many types of hypersonic aircraft configurations are currently being studied for feasibility of future development. Since the control of the hypersonic configurations throughout the speed range has a major impact on acceptable designs, it must be considered in the conceptual design stage. Here, an investigation of the aerodynamic control effectiveness of highly swept delta planforms operating in ground effect is presented. A vortex-lattice computer program incorporating a free wake is developed as a tool to calculate aerodynamic stability and control derivatives. Data generated using this program are compared to experimental data and to data from other vortex-lattice programs. Results show that an elevon deflection produces greater increments in C sub L and C sub M in ground effect than the same deflection produces out of ground effect and that the free wake is indeed necessary for good predictions near the ground.

Maughmer, Mark D.↗
NASA NTRS1993

On the receptivity problem for 0(1) wavelength Goertler vortices

In this paper, we make an investigation of the receptivity of boundary layer flows to Gortler vortex modes. A study by Denier, Hall, and Seddougui (1991) of the generation of vortices by wall roughness elements concluded that such elements are extremely poor as mechanisms to stimulate short wavelength modes, but that analysis was in error. We re-examine this problem and demonstrate how the form of the wall roughness is crucial in determining the vortex stability characteristics downstream of the roughness. In particular, we investigate the cases of both isolated and distributed forcing functions and show that, in general, a distributed function is much more important in generating vortices than are either isolated roughness or freestream disturbances.

Bassom, Andrew P.↗
NASA NTRS1976

Vortex interactions in multiple vortex wakes behind aircraft

A flow visualization technique has been developed which allows the nature of lift-generated wakes behind aircraft models to be investigated. Several different configurations of a 0.61-m span model of a Boeing 747-type transport aircraft were tested to allow observation of typical vortex interactions and merging in multiple vortex wakes. The vortices were identified by emitting tracer dyes from selected locations on the model. Wing span loading and model attitude were found to effect both vortex motions within the wake and resulting far-field wake velocity. Landing gear deployment caused a far-field reformation of vorticity behind a model configuration which dissipated concentrated vorticity in the near-field wake. A modified landing configuration was developed which appeared to significantly alleviate the concentrated wake vorticity.

Ciffone, D. L.↗
NASA NTRS1975

Augmentation of vortex lift by spanwise blowing

An investigation has been conducted to evaluate the aerodynamic effects associated with blowing a jet spanwise over a wing's upper surface in a direction parallel to the leading edge. Experimental pressure and force data were obtained on wings with sweep angles of 30 and 45 degrees and showed that spanwise blowing aids in the formation and control of the leading-edge vortex and, hence, significantly improves the aerodynamic characteristics at high angles of attack. Full vortex section lift is achieved at the inboard span station with a small blowing rate, but successively higher blowing rates are necessary to attain the full vortex-lift level at increased span distances. Spanwise blowing generates large increases in lift at high angles of attack, improves the drag polars, and extends the linear pitching moment to high lifts.

Campbell, J. F.↗
NASA NTRS1976

Further studies of static to flight effects on fan tone noise using inlet distortion control for source identification

Current experimental investigations have linked static inflow distortion phenomena such as the ground vortex, atmospheric turbulence, and teststand structure interference to the generation of fan tone noise at the blade passing frequency. Since such distortions do not exist in flight, it is important to remove them from the static test environment and thereby improve the static-to-flight tone-noise correlation. In the course of providing evidence for this position, a recent investigation used a distortion control inlet with a modern day turbofan engine to assess atmospheric turbulence effects. Although the initial results were encouraging, they were incomplete. The present investigation continues this work and shows more completely the effect of atmospheric turbulence on tone-noise generation. Further, use is made of the distortion control inlet to identify other competing tone-noise sources in the test engine such as a rotor-core stator interaction which was confirmed by engine modifications.

Hodder, B. K.↗
NASA NTRS1979

Recent advances in the solution of three-dimensional flow over wings with leading edge vortex separation

Recent advances in a panel method for the solution of three-dimensional flow about wing and wing-body combinations with leading-edge vortex separation are presented. These advances were achieved as part of an ultimately successful assault on two shortcomings of the method, namely convergence failures in seemingly random cases, and overprediction of lift coefficient for high aspect-ratio wings. Advances include the implementation of improved panel numerics for the purpose of eliminating the highly non-linear effects of ring vortices around doublet panel edges, and the development of a least squares procedure for damping vortex sheet geometry update instabilities. A variety of cases generated by the computer program implementing the method are presented. These cases are of two types. The first type consists of numerical studies, which verify the underlying mathematical assumptions of the method and moreover show that the results are strongly invariant with respect to such user dependent input as wing panel layout, initial sheet shape, sheet rollup, etc. The second type consists of cases run for the purpose of comparing computed results with experimental data, and these comparisons verify the underlying physical assumptions made by the method.

Johnson, F. T.↗
NASA NTRS1982

Simulation of large turbulent structures with the parabolic Navier-Stokes equations

The theoretical basis for well posed marching of a Parabolic Navier-Stokes (PNS) computational technique for supersonic flow is discussed and examples given to verify the analysis. It is demonstrated that stable computations can be made even with very small steps in the marching direction. The method is applied to cones at large angle of attack in high Reynolds number, supersonic flow. Streamline trajectories generated from the numerical solutions demonstrate the development of vortex structures on the lee side of the cone.

Rakich, J. V.↗
NASA NTRS1983

Five-hole pitot probe time-mean velocity measurements in confined swirling flows

Nonswirling and swirling nonreacting flows in an axisymmetric test section with an expansion ratio D/d = 2, which may be equipped with contraction nozzles of area ratios 2 and 4, are investigated. The effects of a number of geometric parameters on the flow-field are investigated, among them side-wall expansion angles of 90 and 45 deg, swirl vane angles of 0, 38, 45, 60, and 70 deg, and contraction nozzle locations L/D = 1 and 2 (if present). Data are acquired by means of a five-hole pitot probe enabling three time-mean velocity components in the axial, radial, and azimuthal directions to be measured. The velocities are extensively plotted and artistic impressions of recirculation zones are set forth. The presence of a swirler is found to shorten the corner recirculation zone and to generate a central recirculation zone followed by a precessing vortex core. A gradual inlet expansion has the effect of encouraging the flow to remain close to the sidewall and shortening the extent of the corner recirculation zone in all cases investigated.

Yoon, H. K.↗
NASA NTRS1985

Turbulence characteristics of swirling flowfields

The time mean and turbulence properties of a confined swirling jet using the six orientation, single hot wire technique were obtained. The effect of swirl on a confined, expanding jet is to reduce the size of the corner recirculation zone and generate a central recirculation zone followed by a precessing vortex core. The effect of introducing a contraction nozzle of area ratio four, located two test section diameters downstream of the inlet, is to dramatically reduce the size and shape of the central recirculation zone for the swirling flows considered. The shear stresses are found to increase by an order of magnitude in the region of the contraction nozzle because of large radial gradients of axial velocity. Reduction of the expansion ratio to D/o = 1 causes the time mean flow field to be homogeneous throughout the entire test section with the tangential velocity dominating in the swirling cases. No recirculation zones were observed for these particular flows. Turbulence levels and dissipation rates were found to be low except in the entrance regions and in areas of acceleration in the swirling flow cases.

Jackson, T. W.↗
NASA NTRS1986

A comparison of the structureborne and airborne paths for propfan interior noise

A comparison is made between the relative levels of aircraft interior noise related to structureborne and airborne paths for the same propeller source. A simple, but physically meaningful, model of the structure treats the fuselage interior as a rectangular cavity with five rigid walls. The sixth wall, the fuselage sidewall, is a stiffened panel. The wing is modeled as a simple beam carried into the fuselage by a large discrete stiffener representing the carry-through structure. The fuselage interior is represented by analytically-derived acoustic cavity modes and the entire structure is represented by structural modes derived from a finite element model. The noise source for structureborne noise is the unsteady lift generation on the wing due to the rotating trailing vortex system of the propeller. The airborne noise source is the acoustic field created by a propeller model consistent with the vortex representation. Comparisons are made on the basis of interior noise over a range of propeller rotational frequencies at a fixed thrust.

Eversman, W.↗
NASA NTRS1989

A computational study on the interaction between a vortex and a shock wave

A computational study of two-dimensional shock vortex interaction is discussed in this paper. A second order upwind finite volume method is used to solve the Euler equations in conservation form. In this method, the shock wave is captured rather than fitted so that the cases where shock vortex interaction may cause secondary shocks can also be investigated. The effects of vortex strength on the computed flow and acoustic field generated by the interaction are qualitatively evaluated.

Meadows, Kristine R.↗