Search NASA⌕ Search

SEARCH · Search NASA

Results for “5”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Anomalous Charge Transfer from Organic Ligands to Metal Halides in Zero‐Dimensional [(C 6 H 5 ) 4 P] 2 SbCl 5 Enabled by Pressure‐Induced Lone Pair‐π Interaction

Abstract Low‐dimensional (low‐D) organic metal halide hybrids (OMHHs) have emerged as fascinating candidates for optoelectronics due to their integrated properties from both organic and inorganic components. However, for most of low‐D OMHHs, especially the zero‐D (0D) compounds, the inferior electronic coupling between organic ligands and inorganic metal halides prevents efficient charge transfer at the hybrid interfaces and thus limits their further tunability of optical and electronic properties. Here, using pressure to regulate the interfacial interactions, efficient charge transfer from organic ligands to metal halides is achieved, which leads to a near‐unity photoluminescence quantum yield (PLQY) at around 6.0 GPa in a 0D OMHH, [(C 6 H 5 ) 4 P] 2 SbCl 5 . In situ experimental characterizations and theoretical simulations reveal that the pressure‐induced electronic coupling between the lone‐pair electrons of Sb 3+ and the π electrons of benzene ring (lp‐π interaction) serves as an unexpected “bridge” for the charge transfer. Our work opens a versatile strategy for the new materials design by manipulating the lp‐π interactions in organic–inorganic hybrid systems.

Luo, Hui↗
DOE OSTI2023

Anomalous Charge Transfer from Organic Ligands to Metal Halides in Zero-Dimensional [(C 6 H 5 ) 4 P] 2 SbCl 5 Enabled by Pressure-Induced Lone Pair-π Interaction

Low-dimensional (low-D) organic metal halide hybrids (OMHHs) have emerged as fascinating candidates for optoelectronics due to their integrated properties from both organic and inorganic components. However, for most of low-D OMHHs, especially the zero-D (0D) compounds, the inferior electronic coupling between organic ligands and inorganic metal halides prevents efficient charge transfer at the hybrid interfaces and thus limits their further tunability of optical and electronic properties. Here, using pressure to regulate the interfacial interactions, efficient charge transfer from organic ligands to metal halides is achieved, which leads to a near-unity photoluminescence quantum yield (PLQY) at around 6.0 GPa in a 0D OMHH, [(C 6 H 5 ) 4 P] 2 SbCl 5 . In situ experimental characterizations and theoretical simulations reveal that the pressure-induced electronic coupling between the lone-pair electrons of Sb 3+ and the π electrons of benzene ring (lp-π interaction) serves as an unexpected “bridge” for the charge transfer. Further, our work opens a versatile strategy for the new materials design by manipulating the lp-π interactions in organic–inorganic hybrid systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

New Synthetic Route to 4,6‐Diamino‐5,7‐dinitro‐benzo‐furazan, Important Decomposition Product of 1,3,5‐Triamino‐2,4,6‐trinitrobenzene

The important 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) decomposition byproduct, 4,6-diamino-5,7-dinitro-benzo-furazan (F 1 ), was prepared in a four-step reaction sequence starting with commercially available materials through a key intermediate, 4,6-dichloro-5,7-dinitro-benzo-furazan. The introduction of azido to 4,6-dichloro-benzo-furazan, followed by nitration and amination gave F 1 in good yield. This new method showed a greatly improved yield and ease of purification than previous methods (the total yield was 30%–40% in seven steps). F 1 is a stable yellow solid with a melting point of 308.7°C and a thermal decomposing temperature of 310.3°C (differential scanning calorimetry at 10°C/min heating rate). The solid-state structure was solved by single-crystal X-ray analyses at low temperatures (100 K). The compound crystallizes in a P 2 1 c space group with the formula C 6 H 4 N 6 O 5 •H 2 O with 12 molecules of F 1 /H 2 O in the unit cell. This compound has eluded complete characterization for almost 50 years. With this information, more advanced decomposition models can be created to further improve critical safety margins in handling the energetic material, TATB.

decomposition↗
DOE OSTI2025

Thermal Gradient Effects on Local Hotspot Ignition in 1,3,5,7‐Tetranitro‐1,3,5,7‐tetrazocane (HMX)

Understanding hotspot ignition, growth, and criticality, as well as the timescales of each, is crucial for parameterizing mesoscale and continuum‐level models that rely on a statistical understanding of hotspots. However, these models often consider hotspots to have uniform temperatures or for hotspots of a given temperature and size to always behave the same. Therefore, using molecular dynamics simulations, we assess the influence of thermal distribution effects on hotspot local ignition and time to ignition in 1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocane (HMX) nanoscale hotspots. Finally, by assessing hotspots with a gradient driven from an initial two‐temperature core–shell setup, we show that small increases in the core temperature under a constant average temperature can lead to order‐of‐magnitude effects on reaction and local ignition timescales.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Enhanced oxidation resistance of (Mo 95 W 5 ) 85 Ta 10 (TiZr) 5 refractory multi-principal element alloy up to 1300°C

Refractory-metal-based alloys are a potential replacement of current nickel-based superalloys due to their excellent mechanical strength at extremely high temperatures. However, severe oxidation in a high-temperature working environment limits their application. To address this challenge, a two-step coating process (including a Mo precoat and a Si-B pack cementation) was applied to an innovative refractory multi-principal element alloy (RMPEA) (Mo 95 W 5 ) 85 Ta 10 (TiZr) 5 . The coating is composed of an aluminoborosilica glass layer on top of a RMPEA-Si-B multilayered structure. Here, the coating effectively protects the RMPEA from oxidation in high-temperature environments, as demonstrated by phase-stable operation at 10–20% higher temperatures over state-of-the-art systems without any forced-cooling system. Following an isothermal exposure at 1300 °C, the weight change of the coated sample follows a paralinear kinetics with a minor weight loss of 4.2 mg/cm 2 after 50 h. Thermal cycling tests between 1300 °C and room temperature in air resulted in the total weight gain of only 2.6 mg/cm 2 after 450 cycles. The coating shows an excellent adherence to the substrate with a boride layer acting as a barrier that maintains the coating integrity. This two-step Mo-Si-B coating method can be adapted to provide environmental resistance to a wide range of RMPEA.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Selective hydrodeoxygenation of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) over carbon supported copper catalysts using isopropyl alcohol as a hydrogen donor

Selective hydrodeoxygenation (HDO) of 5-hydroxymethylfurfural to 2,5-dimethylfuran is of great importance. Here, we reveal a simple pathway for green and efficient HDO using readily available copper with in-situ hydrogen generation. A highly dispersed Cu/PBSAC catalyst consisting of small metallic Cu 0 nanoparticles carries out isopropyl alcohol (IPA) dehydrogenation and subsequent HDO of HMF. Density functional theory calculations reveal that the dehydrogenation of IPA is more favorable on Cu(211) with a lower energy barrier of ~0.6 eV. This facet exists in a higher ratio on nanosized catalysts. Batch reactions using Cu/PBSAC at 190 °C exhibited 91.9% HMF conversion and 71.7% DMF selectivity in 6 hr, and > 96% DMF yield in 10 hr. The mechanical strength of the carbon support is ideal for continuous processing for increased productivity; we demonstrate a > 90% DMF yield at 1/WHSV of 2.4 hr. The process demonstrated here can be integrated with upstream HMF separation utilizing carbon adsorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Nitrogen-doped carbon for selective pseudo-metal-free hydrodeoxygenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran: Importance of trace iron impurity

Heteroatoms-doped carbon materials have recently emerged as effective catalysts for various chemical and electrochemical reactions. The free of metals especially noble metals reduces cost and eliminates issues like sintering or leaching of metals at elevated temperatures in solvents. In this work, selective hydrodeoxygenation (HDO) of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) is for the first time achieved over simple nitrogen-doped carbon (N-C) catalysts. Further, at optimal reaction conditions, a 91% yield of DMF is obtained with excellent catalyst stability. Extensive characterization, including extended X-ray absorption fine-structure (EXAFS) and soft X-ray absorption spectroscopy (sXAS), model reactions, basic data science analysis, and DFT calculations suggest that ppm of Fe in particular FeN 3 sites formed in pyrolysis, rather than non-metallic elements, drive key steps such as H 2 activation and deoxygenation of –OH during HMF HDO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Evolution of {delta}ferrite in a CF3 cast stainless steel upon neutron irradiation to 3, 5, 10, 20, and 40 dpa

The microstructural evolution of delta ferrite in a CF3 cast stainless steel irradiated to 3, 5, 10, 20, and 40 dpa with two dose rates was studied with atom probe tomography (APT) and transmission electron mi-croscopy. Spinodal decomposition and G-phase precipitates induced by neutron irradiation and thermal aging were quantified systematically. The neutron irradiation significantly enhances the spinodal decom-position in delta ferrite as both the spinodal wavelength (i.e. a characteristic repeat distance) and am-plitude (i.e. magnitude of elemental concentration fluctuation) increase after irradiation. The wavelength only varies slightly when the dose increases from 5 to 40 dpa, while the amplitude increases dramatically from 10 to 20 dpa and starts to saturate before 20 dpa. The dose rate and irradiation temperature also have a notable effect on the spinodal wavelength and amplitude. The study shows that higher dose rate promotes a larger wavelength at given irradiation doses. Regarding the G-phase precipitates, a slightly lower irradiation temperature would result in a smaller mean size of G-phase precipitates, while a lower irradiation dose rate would lead to a larger G-phase precipitates at a given temperature and dose. Over-all, the spinodal decomposition and G-phase precipitates in the delta ferrite continue to evolve with the increasing dose beyond 10 dpa. This study confirms that the formation of G-phase precipitates at the in-terdomain region between alpha and alpha-prime is facilitated by the Si and Mo atoms rejected from Fe rich alpha phase and the Ni and Mn atoms rejected from Cr rich alpha-prime phase. Neutron irradiation plays a dominant role in the ferrite instability, and the effect of prior thermal aging at 400 degrees C for 10,000 hours is negligible as the dose is 3 dpa and above.

duplex stainless steel↗
DOE OSTI2021

Measurements of the $^{5}D^{°}_{4}$–$^{5}P_{3}$ transition of singly ionized atomic iodine using intermodulated laser induced fluorescence

Iodine has been an element of recent interest for commercial use as fuel in electrostatic propulsion systems. A lingering problem when investigating ionized iodine using non-perturbative, laser-based techniques is determining the spectral width, i.e., the species temperature, of iodine. To this end, the hyperfine structure must be well understood to develop a spatially resolved diagnostic technique capable of ion flow and temperature measurements. Previous work investigated the lineshape of the transition between the $^{5}D^{°}_{4}$ and $^{5}P_{3}$ states of singly-ionized atomic iodine (I II) with laser induced fluorescence (LIF), but the hyperfine structure of the transition was unresolved in those measurements. In this work, an intermodulated LIF technique is used to measure an enhanced lineshape of the same I II transition. Here, a linear least squares fitting algorithm is used to fit the transition lineshape, where hyperfine transition locations and theorized relative amplitudes are constrained by theory. A lineshape model that incorporates hyperfine transition amplitude enhancement introduced from an intermodulated laser technique is implemented into the fitting function, as well as a nonlinear laser saturation effect. We report converged hyperfine coupling coefficients for these I II states.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Performance characterization of 5×5×12 mm 3 virtual Frisch-grid TlBr detectors

Thallium bromide (TlBr) is a promising material for semiconductor gamma-ray detectors due to its high atomic number (Tl = 81, Br = 35), high density (7.56 g/cm 3 ), and relatively low melting point (460 °C). These properties give TlBr several competitive features, including high detection efficiency, good energy resolution, and lower fabrication costs, making it suitable for applications requiring compact, highly sensitive gamma-ray detection systems. Recent developments of TlBr detectors have progressed toward thicker crystals, up to 10–20 mm, configured as pixelated or virtual Frisch-grid (VFG) devices with volumes >1 cm 3 . Despite these advances, challenges remain in practical implementation, including material and fabrication issues that affect energy resolution, device stability, performance, and longevity. These challenges are similar to those faced by HgI 2 and lead-halide perovskite detectors. Here, this study presents results from characterizing over 100 position-sensitive 5×5×12 mm 3 virtual Frisch-grid detectors fabricated by Radiation Monitoring Devices Inc. For a prototype Radioisotope Identification Device (RIID). The work identified factors limiting the performance and longevity of TlBr detectors, including stochastic response variations that limit the energy resolution to 2–3 % (at 662 keV) for most devices, performance degradation associated with defect decoration, and contact delamination. Addressing these issues advances the use of TlBr and similar materials for reliable, high-resolution gamma-ray spectroscopy.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Surface Studies of β-1,3,5,7-Tetranitro-1,3,5,7-Tetrazoctane and Pentaerythritol Tetranitrate from Density Functional Tight-Binding Calculations and Implications on Crystal Shape

Here, we use density functional tight-binding (DFTB) theory to calculate the surface energies of two energetic crystals: monoclinic β-1,3,5,7-tetranitro-1,3,5,7-tetrazoctane (β-HMX) and tetragonal pentaerythritol tetranitrate (PETN). The results are then employed to determine crystal shapes using the Bravais–Friedel–Donnay–Harker, attachment energy, and surface energy models. We find that energy-based models yield predictions in good agreement with experimental observations. Additionally, we propose a simple model that reframes surface energy as a measure of the lost intermolecular interactions during the formation of a surface from the bulk. The model accurately captures the results from the DFTB calculations and enables us to explain and predict surface energies as a function of the local molecular environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

In Situ Visualization of Local Distortions in the High- T c Molecule-Intercalated Li x (C 5 H 5 N) y Fe 2– z Se 2 Superconductor

A time-resolved synchrotron X-ray total scattering study sheds light on the evolution of the different structural length scales involved during the intercalation of the layered iron–selenide host by organic molecular donors, aiming at the formation of the expanded-lattice Li x (C 5 H 5 N) y Fe 2– z Se 2 hybrid superconductor. The intercalates are found to crystallize in the tetragonal ThCr 2 Si 2 -type structure at the average level, however, with an enhanced interlayer iron–selenide spacing ( d = 16.2 Å) that accommodates the heterocyclic molecular spacers. Quantitative atomic pair distribution function (PDF) analysis at variable times suggests distorted FeSe 4 tetrahedral local environments that appear swollen with respect to those in the parent β-FeSe. Simultaneously acquired in situ synchrotron X-ray powder diffraction data disclose that secondary phases (α-Fe and Li 2 Se) grow significantly when a higher lithium concentration is used in the solvothermal reaction or when the solution is aged. These observations are in line with the strongly reducing character of the intercalation medium’s solvated electrons that mediate the defect chemistry of the expanded-lattice superconductor. In the latter, intralayer correlated local distortions indicate electron-donating aspects that reflect in somewhat enlarged Fe–Se bonds. Additionally, they also reveal a degree of relief of chemical pressure associated with a large distance between Fe and Se sheets (“taller” anion height) and a stretched Fe–Fe square planar topology. The elongation of the latter, derived from the in situ PDF study, speaks for a plausible increase in the Fe-site vacancy concentration. The evolution of the local structural parameters suggests an optimum reaction window where kinetically stabilized phases resemble the distortions of the edge-sharing Fe–Se tetrahedra, required for a high- T c in expanded-lattice iron-chalcogenides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Ambient Tip-Enhanced Photoluminescence with 5 nm Spatial Resolution

We achieve record spatial resolution in ambient tip-enhanced photoluminescence (TEPL) from CdSe/ZnS semiconductor quantum dots (QDs). Our approach only takes advantage of surface roughness at the apex of a sputtered plasmonic gold probe. When irradiated with visible light (633 and 532 nm lasers), nano-corrugated regions of the apex of an Au tip support 5-nm spatial resolution in TEPL imaging of QD aggregates on silicon. The reproducibility of our observations is illustrated using different plasmonic probes and samples. The origin of the observed near-field contrast, underlying the demonstrated high spatial resolution in TEPL, is discussed in the context of field enhancement at the metal tip-fluorophore interface.

Chemical Dynamics Initiative↗
DOE OSTI2024

Influence of Alkali Metal Cations on the Oxygen Reduction Activity of Pt 5 Y and Pt 5 Gd Alloys

Electrolyte species can significantly influence the electrocatalytic performance. In this work, we investigate the impact of alkali metal cations on the oxygen reduction reaction (ORR) on active Pt 5 Gd and Pt 5 Y polycrystalline electrodes. Due to the strain effects, Pt alloys exhibit a higher kinetic current density of ORR than pure Pt electrodes in acidic media. In alkaline solutions, the kinetic current density of ORR for Pt alloys decreases linearly with the decreasing hydration energy in the order of Li + > Na + > K + > Rb + > Cs + , whereas Pt shows the opposite trend. To gain further insights into these experimental results, we conduct complementary density functional theory calculations considering the effects of both electrode surface strain and electrolyte chemistry. The computational results reveal that the different trends in the ORR activity in alkaline media can be explained by the change in the adsorption energy of reaction intermediates with applied surface strain in the presence of alkali metal cations. Our findings provide important insights into the effects of the electrolyte and the strain conditions on the electrocatalytic performance and thus offer valuable guidelines for optimizing Pt-based electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Computational Investigation of the Bonding in [(η 5 –Cp′) 3 (η 1 –Cp′)M] 1– (M = Pu, U, Ce)

Despite the similar ionic radii for Ce 3+ , U 3+ , and Pu 3+ , [(η 5 –Cp′) 3 (η 1 –Cp′)Ce] 1– (Cp′ = C 5 H 4 SiMe 3 , 1-Ce) displays a significantly longer η 1 –Cp′ distance in the solid state compared to the U 3+ and Pu 3+ analogues. To better understand this observation, a theoretical investigation was undertaken to examine the differences in bonding between the actinides 1-Pu and 1-U and how they compare with 1-Ce. The results show that although the bonding is largely ionic and dominated by ligand (2p)–metal (6d/5d) interactions, the polarization of 5f orbitals plays a significant role for 1-Pu and 1-U compared to the 4f-orbitals of 1-Ce. The lack of Ce(4f) interactions is compensated for by increased participation of the Ce(5d) orbitals relative to the actinide 6d orbitals, particularly for the σ-bound η 1 –Cp′ ligand. Furthermore, the use of multiple theoretical approaches including topological, localization, and energy decomposition approaches shows that 1-Pu and 1-U are very similar in covalent character compared to 1-Ce, though the composition and energy of the different interactions suggest that 1-U presents the strongest overall interactions.

Actinides↗