Search NASA⌕ Search

SEARCH · Search NASA

Results for “ACETAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Using 14 C-acetate Pulse-chase Labeling to Study Fatty Acid and Glycerolipid Metabolism in Plant Leaves

Lipids metabolism is comprised of networks of reactions occurred in different subcellular compartments. Isotopic labeling is a good way to track the transformations and movements of metabolites without perturbing overall cellular metabolism. Fatty acids, the building blocks of membrane lipids and storage triacylglycerols, are synthesized in plastids. The immediate precursor for fatty acid synthesis is acetyl-CoA. Exogenous acetate is rapidly incorporated into fatty acids in leaves and isolated plastids because it can diffuse freely through cellular membranes, enter the plastid where it is rapidly metabolized to acetyl-CoA. Therefore, isotope-labeled acetate is often used as a tracer for the investigation of fatty acid synthesis and complex lipid metabolism in plants and other organisms. The basic principle of isotope labeling and its recent technical advances have been reviewed (Allen et al., 2015). The present protocol describes the use of 14C-labeled acetate to determine rates of fatty acid synthesis and degradation and to track the metabolism of glycerolipids in leaves. This method, which is often referred to as acetate pulse-chase labeling, has been widely used to probe various aspects of lipid metabolism (Allen et al., 2015), including the role of autophagy in membrane lipid turnover (Fan et al., 2019) and the interplay between lipid and starch metabolism pathways (Yu et al., 2018).

14C-acetate pulse-chase↗
DOE OSTI2022

Few-Atom Copper Catalyst for the Electrochemical Reduction of CO to Acetate: Synergetic Catalysis between Neighboring Cu Atoms

Single-atom catalysts (SACs) are gaining increasing recognition because of their superior catalytic properties for various reactions. However, the performance of SACs is often limited by the lack of neighboring metal centers to cooperate in catalysis. Herein, a synergetic interaction between neighboring Cu atoms of a few-atom catalyst (FAC) on graphdiyne is found to greatly enhance the production of acetate in CO electroreduction reaction relative to Cu SACs. In a 1.0 M KOH electrolyte, this Cu FAC exhibits an acetate Faradaic efficiency of 53.8±1.5 % and an ultrahigh relative purity of up to 97 wt% for liquid products, and excellent stability of over 23 h continuous electrolysis at -0.8 V versus reversible hydrogen electrode (RHE). Theoretical studies suggest that the intersite catalytic communication between two neighboring metal atoms confined in each pore of GDY facilitates the formation of acetic acid through either stepwise hydrogenation of CH 2 CO* or the direct reaction of H 2 O with CH 2 CO*. Our study demonstrates the unprecedented synergetic catalysis of Cu FAC in promoting the selective CO electroreduction toward acetate production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Adsorption Equilibrium, Kinetics, and Column Breakthrough Data for Aqueous Solutions of Binary-Acid and Ternary-Acid Mixtures of Acetic Acid, Butyric Acid, and Lactic Acid on IRN-78 Ion-Exchange Resin at Initial pH Levels of ∼3–7 and at 25–55 °C

This work is part of an effort to develop thermophysical property data and models supporting adsorptive process development for organic acid separation from a dilute aqueous solution of fermentation broth. It presents systematic experimental measurements for aqueous-phase adsorption equilibrium, kinetics, and column breakthrough for three binary-acid aqueous mixtures (acetic acid + lactic acid, butyric acid + lactic acid, and acetic acid + butyric acid) and one ternary-acid aqueous mixture (acetic acid + butyric acid + lactic acid) on Amberlite IRN-78 ion-exchange resin. The equilibrium measurements covered broad ranges of the initial acid concentration (100–400 mmol/L), initial pH (∼3–7), and temperature (25–55 °C). The equilibrium data for the binary-acid and ternary-acid aqueous mixtures indicate selective adsorption of lactic acid at initial pH levels of ∼3 and 4, while acetic acid and butyric acid are selectively adsorbed at initial pH levels of 5, 6, and 7. The subsequent kinetics and column breakthrough experiments were performed at 200 mmol/L with equimolar ratios, an initial pH of 6, and 25 °C. In conclusion, the measurements provide essential data sets for rigorous thermodynamic modeling and process simulation of adsorptive separation processes for organic acid separation from fermentation broth.

Adsorption↗
DOE OSTI2024

Preparation of Neptunyl and Plutonyl Acetates To Access Nonaqueous Transuranium Coordination Chemistry

Uranyl diacetate dihydrate is a useful reagent for the preparation of uranyl (UO 2 2+ ) coordination complexes, as it is a well-defined stoichiometric compound featuring moderately basic acetates that can facilitate protonolysis reactivity, unlike other anions commonly used in synthetic actinide chemistry such as halides or nitrate. Despite these attractive features, analogous neptunium (Np) and plutonium (Pu) compounds are unknown to date. Here, in this study, a modular synthetic route is reported for accessing stoichiometric neptunyl(VI) and plutonyl(VI) diacetate compounds that can serve as starting materials for transuranic coordination chemistry. The new NpO 2 2+ and PuO 2 2+ complexes, as well as a corresponding molecular UO 2 2+ complex, are isomorphous in the solid state, and in solution show similar solubility properties that facilitate their use in synthesis. In both solid and solution state, the +VI oxidation state (O.S.) is maintained, as demonstrated by vibrational and optical spectroscopy, confirming that acetate anions stabilize the oxidizing, high-valent +VI states of Np and Pu as they do for the more stable U(VI). All three acetate salts readily react with a model diprotic ligand, affording incorporation of U(VI), Np(VI), and Pu(VI) cores into molecular coordination compounds that occurs concomitantly with elimination of acetic acid; the new complexes are high-valent, yet overall charge neutral, facilitating entry into nonaqueous chemistry by rational synthesis. Computational studies reveal that the dianionic ligand framework assists in stabilizing the +VI O.S. via donation to the 5f shells of the actinides, highlighting the potential usefulness of protonolysis reactivity toward preparation of stabilized high-valent transuranic species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Biophysical and biochemical evidence for the role of acetate kinases (AckAs) in an acetogenic pathway in pathogenic spirochetes

Unraveling the metabolism of Treponema pallidum is a key component to understanding the pathogenesis of the human disease that it causes, syphilis. For decades, it was assumed that glucose was the sole carbon/energy source for this parasitic spirochete. But the lack of citric-acid-cycle enzymes suggested that alternative sources could be utilized, especially in microaerophilic host environments where glycolysis should not be robust. Recent bioinformatic, biophysical, and biochemical evidence supports the existence of an acetogenic energy-conservation pathway in T . pallidum and related treponemal species. In this hypothetical pathway, exogenous D-lactate can be utilized by the bacterium as an alternative energy source. Herein, we examined the final enzyme in this pathway, acetate kinase (named TP0476), which ostensibly catalyzes the generation of ATP from ADP and acetyl-phosphate. We found that TP0476 was able to carry out this reaction, but the protein was not suitable for biophysical and structural characterization. We thus performed additional studies on the homologous enzyme (75% amino-acid sequence identity) from the oral pathogen Treponema vincentii , TV0924. This protein also exhibited acetate kinase activity, and it was amenable to structural and biophysical studies. We established that the enzyme exists as a dimer in solution, and then determined its crystal structure at a resolution of 1.36 Å, showing that the protein has a similar fold to other known acetate kinases. Mutation of residues in the putative active site drastically altered its enzymatic activity. A second crystal structure of TV0924 in the presence of AMP (at 1.3 Å resolution) provided insight into the binding of one of the enzyme’s substrates. On balance, this evidence strongly supported the roles of TP0476 and TV0924 as acetate kinases, reinforcing the hypothesis of an acetogenic pathway in pathogenic treponemes.

Deka, Ranjit K.↗
NASA NTRS1986

Methane production from bicarbonate and acetate in an anoxic marine sediment

Methane production from C-14 labeled bicarbonate and acetate was measured over the top 28 cm of anoxic Cape Lookout Bight sediments during the summer of 1983. The depth distribution and magnitude of summed radioisotopically determined rates compare well with previous measurements of total methane production and the sediment-water methane flux. Methane production from CO2 reduction and acetate fermentation accounts for greater than 80 percent of the total production rate and sediment-water flux. Methane production from bicarbonate was found to occur in all depth intervals sampled except those in the top 2 cm, whereas significant methane production from acetate only occurred at depths below 10 cm where sulfate was exhausted. Acetate provided 20 to 29 percent of the measured methane production integrated over the top 30 cm of the sediments.

Crill, P. M.↗
NASA NTRS1987

Isolation and characterization of esters of indole-3-acetic acid from the liquid endosperm of the horse chestnut (Aesculus species)

Esters of indole-3-acetic acid were extracted and purified from the liquid endosperm of immature fruits of various species of the horse chestnut (Aesculus parviflora, A. baumanni, A. pavia rubra, and A. pavia humulis). The liquid endosperm contained, at least 12 chromatographically distinct esters. One of these compounds was purified and characterized as an ester of indole-3-acetic acid and myo-inositol. A second compound was found to be an ester of indole-3-acetic acid and the disaccharide rutinose (glucosyl-rhamnose). A third compound was partially characterized as an ester of indole-3-acetic acid and a desoxyaminohexose.

NASA Discipline Number 40-10↗
DOE OSTI2022

Mechanistic Insights and Rational Design of Ca-Doped CeO 2 Catalyst for Acetic Acid Ketonization

Carboxylic acid ketonization has recently gained significant attention to produce biomass-derived hydrocarbon fuels as it not only removes the highly reactive carboxylic functional group but also increases the size of the carbon chain. In this work, Ca-doped CeO 2 -based catalysts were investigated for acetic acid ketonization using a combined experimental and computational approach. Acetic acid conversion was performed across a range of temperatures including higher temperatures relevant to catalytic hot gas filtration (450 °C). Ca addition slightly decreases overall acetic acid ketonization reactivity yet stabilizes the catalyst at the higher temperatures necessary for catalytic hot gas filtration. From density functional theory calculations of the ketonization reaction mechanism, the C–C coupling and water formation steps are identified as two of the most energy-consuming steps on a CeO 2 surface with a proximal oxygen vacancy and the presence of a Ca dopant stabilizes the key intermediates. Calculations predict an optimal structure comprising three Ca ensembles to minimize the reaction free energies for C–C coupling and water formation steps. These findings provide a priori information to guide future experiments for ketonization catalyst design and development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Acetate formation on metals via CH 4 carboxylation by CO 2 : A DFT study

Here, density functional theory calculations have been performed to investigate CH 4 activation and coupling to CO 2 forming C 2 carboxylates such as acetate on the close-packed (111) or (0001) surfaces of ten mid-to-late transition and coinage metals (Co, Ni, Cu, Ru, Rh, Pd, Ag, Ir, Pt, and Au). Consistent with the literature, the activation energy (E a ) for the initial C-H bond scission in CH 4 is mild, being ca. 1 eV or less on all but the coinage metals, of which Ag exhibits the highest E a at 2.13 eV, followed by Au and Cu. E a for the CH 3 -CO 2 coupling step is 0.8 ~ 1.1 eV on Co, Ru, Rh, and Ag, 1.2 ~ 1.5 eV on Ni, Cu, Pd, and Ir, and 1.8 ~ 2.1 eV on Pt and Au. While the two E a are comparable for several metals in terms of DFT total energies, free energy analysis indicates CH 3 -CO 2 coupling to be much more rate-limiting than CH 4 activation. Overcoming it would require over 800 K even on the most active of the metals considered, Ru, which makes the formation of acetate not feasible on the monometallic metal surfaces. Instead, we propose that single atom alloys based on early transition metals doped into a host metal such as Ni(111) could be viable catalysts. The dopant sites serve to stabilize the transition state of C-C coupling while Ni sites continue to activate CH 4 , thereby significantly lowering the required temperature for acetate formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Rinse-Free, Sodium-Efficient Synthesis of O3-Type Layered Oxide Materials Enabled by Acetate Precursors

Sodium-ion batteries (SIBs) are a sustainable alternative to lithium-ion systems for global electrification, with O3-type layered oxide cathodes offering high specific capacity and feasibility of scalable synthesis. Industrial co-precipitation synthesis of these cathodes typically uses transition metal sulfates, requiring extensive water rinsing to remove Na 2 SO 4 impurities, a process that consumes significant water and risks residual inactive phases if incomplete. Here, this work introduces a rinse-free, resource-efficient approach using metal acetate precursors. Residual sodium acetate in non-rinsed precursors decomposes during sintering to generate Na 2 CO 3 in situ, partially substituting an external sodium resource (e.g., NaOH and Na 2 CO 3 ) and reducing its consumption by ∼18–20%. Phase-pure O3-Na 1.0 Ni 1/3 Fe 1/3 Mn 1/3 O 2 (NFM111) cathodes synthesized via this method exhibit microstructure and electrochemical performance comparable to rinsed sulfate-derived counterparts, with initial capacities of 141 mAh g −1 at C/20 (7.5 mA g −1 ). By eliminating rinsing and minimizing sodium reagent use, this acetate-based route enhances sustainability and scalability of layered oxide production for SIBs.

acetate vs. sulfate↗
DOE OSTI2022

The Ethanol–Ethyl Acetate System as a Biogenic Hydrogen Carrier

Liquid organic hydrogen carriers will likely be a key element of a future hydrogen economy by enabling the storage and transport of large quantities of hydrogen. Ethanol is a liquid organic hydrogen carrier that is readily available from biological resources, which undergoes a reversible reaction to yield hydrogen and ethyl acetate. The objective of the present study is to obtain a better understanding of the thermodynamic and environmental suitability of the ethanol–ethyl acetate cycle for hydrogen storage applications. The analysis covers three aspects: thermodynamics of the chemical reaction, energy balance of the process, and a first‐order assessment of greenhouse gas emissions. Thermodynamics of the reaction are characterized by a standard Gibbs energy of reaction close to zero which allows the reaction to be shifted between hydrogenation and dehydrogenation within a moderate window of temperature and pressure conditions. The energy demand for dehydrogenation is comparatively small, resulting in an overall system efficiency of 88%. A life cycle greenhouse gas analysis over a 20‐year storage system lifetime gives a carbon intensity of 7.0 kg‐CO 2eq /kg‐H 2 delivered. These results indicate that the ethanol–ethyl acetate system has considerable promise as a hydrogen carrier and should be the subject of further research.

08 HYDROGEN↗
DOE OSTI2021

Chemical upgrade of carbon monoxide to acetate on an atomically dispersed copper catalyst via CO-insertion

Electrochemical conversion of small molecules such as carbon dioxide (CO 2 ) and carbon monoxide (CO) to high-value multi-carbon products (C 2+ ) offers a chemical upgrade approach for fuels and chemical feedstock production using renewable energy, in the possible absence of the petrochemical industry under the new energy system such as hydrogen economy. Identifying robust and efficient electrocatalysts to selectively produce C 2+ products remains a challenge. In this study, we report a synthetic strategy of atomically dispersing copper atoms on nitrogen-rich porous carbon (Cu–N–C) through pyrolysis of a supramolecular assembly. Benefitting from the unsaturated coordination structure, in KOH electrolyte, the Cu–N–C with a Cu content of 6.9 wt% exhibits a maximum acetate Faradaic efficiency (FE) of 30% with an acetate partial current density as high as 48 mA cm –2 in electrochemical CO reduction. Different from the C–C coupling mechanism on metallic copper, we propose a CO insertion mechanism for the acetate production on the single site copper catalyst.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Anhydrous vs Hydrated f-Element Acetate Polymers Dictated by the Stoichiometry of Protic Acidic/Basic Azole Mixtures

Continuing our investigations of ionic liquid (IL) based routes to a library of f-element/soft donor complexes which could be studied crystallographically, we have explored the dissolution of f-element salts in protic imidazole-based ILs containing only soft donors at high temperatures to drive off volatiles, including water and carboxylic or mineral acids. Here we present our results, reacting acidic and basic azoles in 1:3 or 1:1 stoichiometric compositions at elevated temperature, followed by saturation with Nd(OAc) 3 ·xH 2 O or Ce(OAc) 3 ·xH 2 O, which led to 13 new metal–acetate polymeric complexes identified by single-crystal X-ray diffraction. We found that the diversity in coordination modes of the simple acetate ligand that interfere with substitution of the softer N donors led to several readily crystallizable complexes forming two distinct groups with respect to f-element interaction with the ionic liquid precursors. When the acidic/basic azole ratio was 1:3, acetate and a neutral basic azole were found to be coordinated to the metal centers but no water, although in one case (2) water was observed in the secondary coordination sphere: [Ce(μ 2 -OAc) 3 (C 1 im)] n (1, C 1 im = 1-methylimidazole), [Nd(μ 2 -(OAc) 3 (C 1 im)] n ·nH 2 O (2), [Ce(μ 2 -OAc) 3 (C 2 im)] n (3, C 2 im = 1-ethylimidazole), [Ln(μ 2 -OAc) 3 DMF] n (Ln = Nd (4), Ce (5); dimethylformamide (DMF) was substituted for the azole mixture), and [Nd(μ 2 -OAc) 3 (C 4 im)] n (6, C 4 im = 1-butylimidazole). However, when the stoichiometric ratio was 1:1, water was always observed coordinated to the metal ions with the acidic azole included in the structure as a solvate or cocrystal, despite a higher reaction temperature: [Nd(μ 2 -OAc) 3 (OH 2 )] n ·n(1,2,3-Taz) (7, 1,2,3-Taz = 1,2,3-triazole), [Ln(μ 2 -OAc) 3 (OH 2 )] n ·n(4,5-DCim) (Ln = Nd (8), Ce (9), 4,5-DCim = 4,5-dicyanoimidazole), [Ln(μ 2 -OAc) 3 (OH 2 )] n ·n(3,5-diNH 2 -1,2,4-Taz) (Ln = Nd (10), Ce (11), 3,5-diNH 2 -1,2,4-Taz = 3,5-diamino-1,2,4-triazole), [Ce(μ 2 -OAc) 3 (OH 2 )] n ·n(3-NH 2 -1,2,4-Taz) (12, 3-NH 2 -1,2,4-Taz = 3-amino-1,2,4-triazole), and [Nd(μ 2 -OAc) 3 (OH 2 )] n ·n(5-NH 2 -Tz) (13, 5-NH2-Tz = 5-aminotetrazole). All of the compounds retain the Ln:OAc– ratio of 1:3 and form 1D polymeric chains; however, they exhibit a variety of coordination modes affecting the degree of chain condensation. The isolation of both hydrated and anhydrous products revealed different abilities of the investigated soft N-donors to compete with O-donors finding their place in the coordination sphere of the lanthanide or in the crystal lattice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Can Isoprene Oxidation Explain High Concentrations of Atmospheric Formic and Acetic Acid over Forests?

Formic and acetic acid concentrations are particularly high over forested areas of the world. However, the gas-phase mechanisms for producing these acids are poorly understood even for isoprene, the globally dominant biogenic hydrocarbon. We quantified formic and acetic acid production from reactions of hydroxyl radical (OH) (between high and low ranges of nitric oxide (NO) levels) with isoprene, methacrolein (MACR), isoprene epoxydiol (IEPOX), isoprene hydroxy hydroperoxide (ISOPOOH), and α-pinene from the focused isoprene experiments at California Institute of Technology (FIXCIT) laboratory chamber study. We find that (i) OH oxidation of MACR, IEPOX, and ISOPOOH are sources of formic acid, (ii) isoprene peroxy radical isomerization and associated photolysis oxidation products are potentially important sources of organic acids, and (iii) high levels of NO generally suppress organic acid formation from OH oxidation of isoprene. We modified existing chemical mechanisms for isoprene oxidation to account for organic acid production pathways observed in the FIXCIT study. We simulated organic acid production during the Southeastern Oxidant and Aerosol Study using the updated chemical mechanisms and represented acetic acid within a factor of 2 but still underpredicted formic acid by a factor of 6. While we cannot explain ambient formic acid with explicit chemical mechanisms, the FIXCIT results suggest that the oxidation of isoprene could account for as much as 70% of the global annual production of formic acid from gas-phase reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Selective Formation of Acetic Acid and Methanol by Direct Methane Oxidation Using Rhodium Single-Atom Catalysts

Atomically dispersed catalysts such as single-atom catalysts have been shown to be effective in selectively oxidizing methane, promising a direct synthetic route to value-added oxygenates such as acetic acid or methanol. However, an important challenge of this approach has been that the loading of active sites by single-atom catalysts is low, leading to a low overall yield of the products. We report an approach that can address this issue. It utilizes a metal–organic framework built with porphyrin as the linker, which provides high concentrations of binding sites to support atomically dispersed rhodium. It is shown that up to 5 wt% rhodium loading can be achieved with excellent dispersity. When used for acetic acid synthesis by methane oxidation, a new benchmark performance of 23.62 mmol·gcat –1 ·h –1 was measured. Furthermore, the catalyst exhibits a unique sensitivity to light, producing acetic acid (under illumination, up to 66.4% selectivity) or methanol (in the dark, up to 65.0% selectivity) under otherwise identical reaction conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Insights into the transcriptional regulation of poorly characterized alcohol acetyltransferase-encoding genes (HgAATs) shed light into the production of acetate esters in the wine yeast Hanseniaspora guilliermondii

Abstract Hanseniaspora guilliermondii is a well-recognized producer of acetate esters associated with fruity and floral aromas. The molecular mechanisms underneath this production or the environmental factors modulating it remain unknown. Herein, we found that, unlike Saccharomyces cerevisiae, H. guilliermondii over-produces acetate esters and higher alcohols at low carbon-to-assimilable nitrogen (C:N) ratios, with the highest titers being obtained in the amino acid-enriched medium YPD. The evidences gathered support a model in which the strict preference of H. guilliermondii for amino acids as nitrogen sources results in a channeling of keto-acids obtained after transamination to higher alcohols and acetate esters. This higher production was accompanied by higher expression of the four HgAATs, genes, recently proposed to encode alcohol acetyl transferases. In silico analyses of these HgAat’s reveal that they harbor conserved AATs motifs, albeit radical substitutions were identified that might result in different kinetic properties. Close homologues of HgAat2, HgAat3, and HgAat4 were only found in members of Hanseniaspora genus and phylogenetic reconstruction shows that these constitute a distinct family of Aat’s. These results advance the exploration of H. guilliermondii as a bio-flavoring agent providing important insights to guide future strategies for strain engineering and media manipulation that can enhance production of aromatic volatiles.

Seixas, Isabel↗
NASA NTRS1988

Formic and acetic acid over the central Amazon region, Brazil. I - Dry season

The concentrations of formic and acetic acids in the gas phase, atmospheric aerosol, and rainwater samples collected in Amazonia at ground level and in the atmosphere during the Amazon Boundary Layer Experiment in July/August 1985 were analyzed by ion exchange chromatography. The diurnal behavior of both acids at ground level and their vertical distribution in the forest canopy point to the existence of vegetative sources as well as to production by chemical reactions in the atmosphere. The concentrations of formic and acetic acids in the gas phase were about 2 orders of magnitude higher than the corresponding concentrations in the atmospheric aerosol. In rainwater, the total formate and acetate represented about one half of the anion equivalents, in contrast to less than 10 percent of the soluble anionic equivalents contributed by these acids in the atmospheric aerosol. The observed levels of these ions in rainwater are considered to be the result of a combination of chemical reactions in hydrometeors and the scavenging of the gaseous acids by cloud droplets.

Andreae, M. O.↗
NASA NTRS1987

Natural abundances of carbon isotopes in acetate from a coastal marine sediment

Measurements of the natural abundances of carbon isotopes were made in acetate samples isolated from the anoxic marine sediment of Cape Lookout Bight, North Carolina. The typical value of the total acetate carbon isotope ratio (delta 13C) was -16.1 +/- 0.2 per mil. The methyl and carboxyl groups were determined to be -26.4 +/- 0.3 and -6.0 +/- 0.3 per mil, respectively, for one sample. The isotopic composition of the acetate is thought to have resulted from isotopic discriminations that occurred during the cycling of that molecule. Measurements of this type, which have not been made previously in the natural environment, may provide information about the dominant microbial pathways in anoxic sediments as well as the processes that influence the carbon isotopic composition of biogenic methane from many sources.

NASA Discipline Exobiology↗