SEARCH · Search NASA
Results for “ADELS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High-Pressure Structural and Thermodynamic Properties of Cerium Orthosilicates (CeSiO 4 )
Pressure-induced phase transitions from the zircon structure-type (I4 1 /amd) to the scheelite structure type (I4 1 /a) are known for many ternary oxides systems (ABO 4 ). In this work, we present the first high-pressure study on synthetic stetindite (CeSiO 4 ) by a combination of in situ high-pressure synchrotron powder X-ray diffraction up to 36 GPa, implemented with and without dual sided laser heating, and in situ high-pressure Raman spectroscopy up to 43 GPa. Two phase transitions were identified: zircon to a high-pressure low-symmetry (HPLS) phase at 15 GPa and then to a scheelite at 18 GPa. The latter from HPLS scheelite phase was found irreversible; i.e., scheelite is fully quenchable at ambient conditions, as in other zircon-type phases. The bulk moduli (K 0 ) of stetindite, HPLS, and high-pressure scheelite phases were determined, respectively, as 171(5), 105(4), and 221(40) GPa by fitting to a second-order Birch-Murnaghan equation of state. The pressure derivatives of vibrational modes and Gru''neisen parameters of the zircon-structured polymorph are similar to those of other orthosilicate minerals. In conclusion, due to the larger ionic radii of Ce 4+ , with respect to Zr 4+ , stetindite was found to possess a softer bulk modulus and undergo the phase transitions at a lower pressure than zircon (ZrSiO 4 ), such observations are consistent with what were found in coffinite (USiO 4 ).
Synthesis and Physical Properties of Manganese Chromium Nitride Thin Films Grown via Molecular Beam Epitaxy
Here, we demonstrate the ability to grow epitaxial thin films of manganese–chromium nitride (Mn x Cr 1–x N) across the entire composition range on magnesium oxide (MgO) (1 0 0) surfaces by molecular beam epitaxy. By independently controlling the ratio of the atomic fluxes of manganese and chromium, the compositional dependence of structural and electrical transport properties is determined. Soft X-ray absorption shows that the valence states of Cr( 3+ ) and Mn( 3+ ) remain identical among these MnCrN epitaxial films. The metallic transport behavior of binary manganese nitride (MnN) and chromium nitride (CrN) is suppressed in the ternary alloys. Changes in room temperature electrical resistivity of up to 100 times and 5 orders of magnitude at cryogenic temperatures are observed. This work expands the variety of nitride compounds available for epitaxial integration and could provide additional flexibility for the development of metal–semiconductor–insulator junctions for spintronic devices.
Insight into the Ionizing Surface Potential Method and Aqueous Sodium Halide Surfaces
Not provided.
High-Temperature Thermodynamics of Cerium Silicates, A-Ce 2 Si 2 O 7 , and Ce 4.67 (SiO 4 ) 3 O
Lanthanide disilicates and oxyapatites have potential roles in high temperature applications as thermal (TBC) and environmental barrier coatings (EBC), or possible alteration phases in geological nuclear waste repositories. However, those Ce 3+ -bearing silicates have only been limitedly studied. In this work, we performed detailed structural and thermodynamic investigations on A-Ce 2 Si 2 O 7 (tetragonal, P4 1 ) and Ce 4.67 (SiO 4 ) 3 O (hexagonal, P6 3 /m). The high temperature structural behaviors and coefficients of thermal expansion were determined by in situ high temperature synchrotron X-ray diffraction (HT-XRD) implemented with Rietveld analysis and thermogravimetric analysis coupled with differential scanning calorimetry (TGA-DSC). A-Ce 2 Si 2 O 7 was found to be stable in N 2 and air up to ~1483 K with anisotropic thermal expansion along the a and c axes (α a = 12.3 × 10 -6 K -1 and α c = 12.4 × 10 -6 K -1 ). Ce 4.67 (SiO 4 ) 3 O had a slow partial oxidation between 533 K and 873 K to a new nonstoichiometric phase Ce 3+ 1.67- xCe4 + x Ce 3+ 3 (SiO 4 ) 3 O 1+0.5x , followed by a thermal decomposition to CeO 2 and SiO 2 at ~1000 K in air. By using high temperature oxide melt solution calorimetry at 973 K with lead borate as the solvent, the standard enthalpy of formation was determined for A-Ce 2 Si 2 O 7 (-3825.1 ± 6.0 kJ/mol) and Ce 4.67 (SiO 4 ) 3 O (-7391.3 ± 9.5 kJ/mol). Finally, these thermodynamic parameters were compared with those of CeO 2 , CeSiO 4 , and other silicate oxyapatites for examining their chemical stability in high temperature environments relevant for aeronautical applications, mineral formation, and nuclear fuel cycle.
Utilizing Site Disorder in the Development of New Energy-Relevant Semiconductors
We report controlling site disorder in ternary and multinary compounds enables tuning optical and electronic properties at fixed lattice constants and stoichiometries, moving beyond many of the challenges facing binary alloy systems. Here, we consider possible enhancements to energy-related applications through the integration of disorder-tunable materials in devices such as light-emitting diodes, photonics, photovoltaics, photocatalytic materials, batteries, and thermoelectrics. However, challenges remain in controlling and characterizing disorder. Focusing primarily on II–IV–V 2 materials, we identify three metrics for experimentally characterizing cation site disorder. Complementary to these experiments, we discuss simulation methods to understand disordered materials. Nonidealities, such as off-stoichiometry and oxygen incorporation, can occur while synthesizing metastable disordered materials. While nonidealities may seem undesirable, we describe how if harnessed they could provide another knob for tuning disorder and subsequently properties. To illustrate the effects of disorder on device-relevant properties, we provide case examples of disordered materials and their potential in device applications.
Quantum Monte Carlo and Density Functional Theory Study of Strain and Magnetism in 2D 1T-VSe 2 with Charge Density Wave States
Two-dimensional (2D) 1T-VSe 2 has prompted significant interest due to the discrepancies regarding alleged ferromagnetism (FM) at room temperature, charge density wave (CDW) states, and the interplay between the two. We employed a combined Diffusion Monte Carlo (DMC) and density functional theory (DFT) approach to accurately investigate the magnetic properties, CDW states, and their responses to strain in monolayer 1T-VSe 2 . Our calculations show the delicate competition between various phases, revealing critical insights into the relationship between their energetic and structural properties. Here, we performed classical Monte Carlo simulations informed by our DMC and DFT results and found the magnetic transition temperature (T c ) of the undistorted (non-CDW) FM phase to be 228 K and the distorted (CDW) phase to be 68 K. Additionally, we studied the response of biaxial strain on the energetic stability and magnetic properties of various phases of 2D 1T-VSe 2 and found that small amounts of strain can increase the T c , suggesting a promising route for engineering and enhancing magnetic behavior. Finally, we synthesized 1T-VSe 2 and performed Raman spectroscopy measurements, which were in close agreement with our calculated results, validating our computational approach. Our work emphasizes the role of highly accurate DMC methods in advancing the understanding of monolayer 1T-VSe 2 and provides a robust framework for future studies of 2D magnetic materials.
Carbamoylation as an Effective Tool in the Analysis of the Soman Nerve Agent Marker Pinacolyl Alcohol in Soil Matrices by EI-GC-MS and LC-HRMS
Pinacolyl alcohol (PA) is a Schedule 2 chemical commonly featured in most proficiency tests (PTs) administered by the Organisation for the Prohibition of Chemical Weapons (OPCW) due to its direct as well as forensic link to the nerve agent Soman. Therefore, its detection by Chemical Weapons Convention (CWC) inspection teams during on-site investigations is a strong indicator of the past or latent presence of Soman in the environment. Its small molecular weight (102), early elution time, and poor ionization profile make PA a challenging analyte to detect particularly at low concentrations (∼1–10 μg/g). In this work, 1,1′-carbonyldimidazole (CDI) has been used to effectively modify PA for the first time in two different soil matrices (Virginia type A soil and silt sediment) at two separate concentrations (1 and 10 μg/g) for its subsequent detection by EI-GC-MS and LC-HRMS methods. For the EI-GC-MS analysis, the PA carbamate derivative (PIC) exhibits improved chromatography relative to PA such as improved peak shape, increased molecular weight (196 for PIC and 102 for PA) and increased retention time (16.9 min for PIC and ∼4.1 min for PA). In addition, the derivatization also improves the detection of PA by LC-HRMS as the PIC product possesses protonation sites (i.e., imidazole ring) relative to none exhibited by PA. More importantly, the carbamoylation proceeds under mild conditions (55 °C, no base) and rapidly (3 h), characteristics that make it an appealing protocol for the analysis of PA during OPCW PTs or real case scenarios particularly in instances where it is present at low concentrations. It is anticipated that the protocol can be applied to the forensic analysis of this important Soman marker in various environmental matrices.
Zinc Titanium Nitride Semiconductor toward Durable Photoelectrochemical Applications
Not Available
Highlighting the Importance of Authentic Reference Chemicals in the Unambiguous Identification of Unknowns during Routine Sample Analysis─An OPCW Proficiency Test Case
The unequivocal identification of unknown chemicals during routine sample analysis is a constant occurrence in the field of analytical chemistry. The process can be painstakingly tedious, particularly in situations where a tentatively identified unknown may possess isomeric counterparts yielding identical accurate mass values and very similar mass spectra. In this work, we present the experimental process involved in the correct identification of 1,4-oxathiane 4,4-dioxide and differentiation from its constitutional isomer, 2-hydroxyethyl vinyl sulfone, when present in a silica gel matrix featured in the 54th Environmental Organisation for the Prohibition of Chemical Weapons (OPCW) proficiency test. After discovering that the library-generated mass spectrum for 2-hydroxyethyl vinyl sulfone in a preliminary gas chromatography–mass spectrometry (GC-MS) analysis did not match the one from an authentic reference chemical, we embarked on an unknown structure determination campaign involving GC-MS, liquid chromatography-tandem mass spectrometry (LC-MS-MS), and nuclear magnetic resonance (NMR) spectroscopy. All of the information obtained, coupled to the synthesis of an authentic reference chemical, was used to determine the identity of the unknown as 1,4-oxathiane 4,4-dioxide. The process described in this work highlights the important role played by authentic reference chemicals in the identification of unknown chemicals during routine sample analysis.
Cloud Top Radiative Cooling Rate Drives Non-Precipitating Stratiform Cloud Responses to Aerosol Concentration
Increases in aerosol concentration are well known to influence the microphysical processes and radiative properties of clouds. By reducing droplet size, an increase in aerosol can lessen collision efficiency and increase liquid water path (LWP) in precipitating clouds or enhance evaporation rate and decrease LWP in non-precipitating clouds. We utilize large eddy simulations to further investigate these aerosol indirect effects in Arctic mixed-phase clouds and find, in agreement with previous studies, precipitating clouds to experience an increase in LWP and non-precipitating clouds a decrease in LWP. Most importantly however, our results reveal a different explanation for why such an LWP decrease occurs in decoupled, non-precipitating clouds. We find enhanced evaporation near cloud top to be driven primarily by a strengthening of maximum radiative cooling rate with aerosol concentration which drives stronger entrainment, an effect that holds true even in clouds that are optically thick.
Impacts of Bulk Microphysics Scheme Structural Choices on Simulations of Rain Initiation Through Drop Coalescence
This study examines how different structural choices in bulk microphysics schemes impact the simulation of warm rain initiation. A single liquid category (SLC) approach prognosing up to four moments of a single drop size distribution (DSD) is compared to the traditional two-category, two-moment approach with separate DSDs for cloud and rain (four total prognostic variables). Different methods for calculating tendencies of the prognostic variables from drop collision-coalescence are also tested: a discretized numerical-integration approach, machine learning via neural networks, lookup tables, and traditional power law fits. Relative to simulations using a bin microphysics model, SLC gives smaller error overall than the two-category approach when numerical integration is used to calculate the collision-coalescence tendencies for both. Replacing the numerical integration with a pre-computed lookup table reduces computational cost with little loss of accuracy. However, using fitted power laws with SLC to represent the collision-coalescence tendencies substantially reduces accuracy and leads to an order of magnitude increase in error. It is also demonstrated that with SLC, reasonably accurate solutions are obtained using only three prognostic moments, while a two-moment SLC scheme leads to substantial error. Overall, both the choice of prognostic moments (e.g., SLC vs. two-category) and method to calculate the collision-coalescence tendencies are important to consider for minimizing errors in bulk schemes. SLC with a sufficiently detailed calculation of the collision-coalescence tendencies provides accurate solutions for a reasonable computational cost, providing a viable alternative to the traditional two-category, two-moment approach for bulk microphysics.
Perfect short-range ordered alloy with line-compound-like properties in the ZnSnN 2 :ZnO system
We present a new solid-state material phase which is a disordered solid solution but offers many ordered line-compound features. The emergent physical phenomena are rooted in the perfect short-range order which conserves the local octet rule. We model the dual-sublattice-mixed semiconductor alloy (ZnSnN 2 ) 1-x (ZnO) 2x using first-principles calculations, Monte-Carlo simulations with a model Hamiltonian, and an extension of the regular solution model by incorporating short-range order. We demonstrate that this unique solid solution, occurring at a “magic” composition, can provide an electronically pristine character without disorder-induced charge localization and, therefore, a superior carrier transport similar to ordered phases. Interestingly, this phase shows singularities that are absent in the conventional solid-solution models, such as the regular solution and band-gap bowing model. Thermodynamically, this alloy phase has a sharply reduced enthalpy at its composition (like a line compound), but it still requires the entropy from long-range disorder to be stabilized at experimentally accessible temperatures.
Transition metal impurities in silicon: computational search for a semiconductor qubit
Abstract Semiconductors offer a promising platform for physical implementation of qubits, but their broad adoption is presently hindered by limited scalability and/or very low operating temperatures. Learning from the nitrogen-vacancy centers in diamond, our goal is to find equivalent optically active point defect centers in crystalline silicon, which could be advantageous for their scalability and integration with classical devices. Transition metal (TM) impurities in silicon are common paramagnetic deep defects, but a comprehensive theoretical study of the whole 3 d series that considers generalized Koopmans’ condition is missing. We apply the HSE06(+U) method to examine their potential as optically active spin qubits and identify seven TM impurities that have optically allowed triplet–triplet transitions within the silicon band gap. These results provide the first step toward silicon-based qubits with higher operating temperatures for quantum sensing. Additionally, these point defects could lead to spin-photon interfaces in silicon-based qubits and devices for mid-infrared free-space communications.
Community standards and future opportunities for synthetic communities in plant–microbiota research
Harnessing beneficial microorganisms is seen as a promising approach to enhance sustainable agriculture production. Synthetic communities (SynComs) are increasingly being used to study relevant microbial activities and interactions with the plant host. Yet, the lack of community standards limits the efficiency and progress in this important area of research. Here, to address this gap, we recommend three actions: (1) defining reference SynComs; (2) establishing community standards, protocols and benchmark data for constructing and using SynComs; and (3) creating an infrastructure for sharing strains and data. We also outline opportunities to develop SynCom research through technical advances, linking to field studies, and filling taxonomic blind spots to move towards fully representative SynComs.
Observation of a linked-loop quantum state in a topological magnet
Quantum phases can be classified by topological invariants, which take on discrete values capturing global information about the quantum state. Over the past decades, these invariants have come to play a central role in describing matter, providing the foundation for understanding superfluids, magnets, the quantum Hall effect, topological insulators, Weyl semimetals and other phenomena. Here we report an unusual linking-number (knot theory) invariant associated with loops of electronic band crossings in a mirror-symmetric ferromagnet. Using state-of-the-art spectroscopic methods, we directly observe three intertwined degeneracy loops in the material's three-torus, T 3 , bulk Brillouin zone. We find that each loop links each other loop twice. Through systematic spectroscopic investigation of this linked-loop quantum state, we explicitly draw its link diagram and conclude, in analogy with knot theory, that it exhibits the linking number (2, 2, 2), providing a direct determination of the invariant structure from the experimental data. Here we further predict and observe, on the surface of our samples, Seifert boundary states protected by the bulk linked loops, suggestive of a remarkable Seifert bulk-boundary correspondence. Our observation of a quantum loop link motivates the application of knot theory to the exploration of magnetic and superconducting quantum matter.