Erratum: “Magnetic and magnetocaloric properties of bulk dysprosium chromite” [J. Appl. Phys. 114, 113904 (2013)]
No abstract prepared.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
No abstract prepared.
Mn-Fe-P-Ge alloys are promising, low cost, high performance candidates for magnetic cooling applications based on the magnetocaloric effect. These alloys undergo a magnetic phase transition which induces a large entropy change (ΔS). Experimental and modeling studies were conducted to study this transition for varying Ge content. Landau theory and the Bean-Rodbell model were applied to Mn{sub 1.1}Fe{sub 0.9}P{sub 1−x}Ge{sub x} (x = 0.26, 0.3, and 0.32) melt spun ribbons to model the phase transition and the associated entropy change. The critical behavior of these alloys was studied. The critical composition range at which the cross over from first order to second order magnetic transition occurs was determined. The calculated thermodynamic values and critical temperatures were in good agreement with our experimental results. A high maximum entropy change (ΔS) of ∼44.9 J kg{sup −1} K{sup −1} was observed in Mn{sub 1.1}Fe{sub 0.9}P{sub 0.74}Ge{sub 0.26} in a 5 T applied magnetic field. The results suggest that Mn-Fe-P-Ge alloys are very attractive materials for near room temperature magnetic cooling.
Structural and magnetic properties in TbMn{sub 2}Si{sub 2} are studied by variable temperature X-ray diffraction, magnetization, electrical resistivity, and heat capacity measurements. TbMn{sub 2}Si{sub 2} undergoes two successive magnetic transitions at around T{sub c1} = 50 K and T{sub c2} = 64 K. T{sub c1} remains almost constant with increasing magnetic field, but T{sub c2} shifts significantly to higher temperature. Thus, there are two partially overlapping peaks in the temperature dependence of magnetic entropy change, i.e., −ΔS{sub M} (T). The different responses of T{sub c1} and T{sub c2} to external magnetic field, and the overlapping of −ΔS{sub M} (T) around T{sub c1} and T{sub c2} induce a large refrigerant capacity (RC) within a large temperature range. The large reversible magnetocaloric effect (−ΔS{sub M}{sup peak} ∼ 16 J/kg K for a field change of 0–5 T) and RC (=396 J/kg) indicate that TbMn{sub 2}Si{sub 2} could be a promising candidate for low temperature magnetic refrigeration.
The present work proposes a thermodynamic hexacycle based on the magnetocaloric oscillations of graphene, which has either a positive or negative adiabatic temperature change depending on the final value of the magnetic field change. For instance, for graphenes at 25 K, an applied field of 2.06 T/1.87 T promotes a temperature change of ca. −25 K/+3 K. The hexacycle is based on the Brayton cycle and instead of the usual four steps, it has six stages, taking advantage of the extra cooling provided by the inverse adiabatic temperature change. This proposal opens doors for magnetic cooling applications at low temperatures.
Hexagonal shaped nanoparticles about 60 nm in size were successfully synthesized in tetraethylene glycol solution containing polyvinylpyrrolidone. By the analysis of the electron diffraction pattern, these were identified as a single crystal of Ni carbide with Ni{sub 3}C − type structure. Their magnetization curve at 5 K was not completely saturated under a magnetic field of 5 T. The thermomagnetization curves after zero-field cooling and after field cooling exhibited the magnetic cooling effect at low temperatures. Furthermore, the 2nd order nonlinear term of AC magnetic susceptibility exhibited a negative divergence at about 17 K. It is concluded that Ni carbide single crystal nanoparticles with the Ni{sub 3}C − type structure exhibit spin-glass transition at low temperatures.
We report magnetic and magnetocaloric (MCE) properties of polycrystalline Eu{sub 1−x}La{sub x}TiO{sub 3} samples over a wide composition range (0.01 ≤ x ≤ 0.20). It is found that the ground state changes from antiferromagnetic for x = 0.01 (T{sub N} = 5.2 K) to ferromagnetic for x ≥ 0.03 and the ferromagnetic Curie temperature increases from T{sub C} = 5.7 K for x = 0.03 to T{sub C} = 7.9 K for x = 0.20. The x = 0.01 sample shows a large reversible isothermal magnetic entropy change of −ΔS{sub m} = 23 (41.5) J/kg K and adiabatic temperature change of ΔT{sub ad} = 9 (17.2) K around 6.7 K for a field change of μ{sub 0}ΔH = 2 (5) Tesla. Although the peak value of −ΔS{sub m} decreases as La content increases, it is impressive in x = 0.2(−ΔS{sub m} = 31.41 J/kg K at T = 7.5 K for μ{sub 0}ΔH = 5 T). The large value of MCE arises from suppression of the spin entropy associated with the localized moment (J = 7/2) of Eu{sup 2+}:4f{sup 7} ions. This large MCE over a wide compositional range suggests that the Eu{sub 1−x}La{sub x}TiO{sub 3} series could be useful for magnetic cooling below 40 K.
Explore the source record for details and available documents.
We propose a solid-state refrigeration technique based on repeated adiabatic magnetization and demagnetization cycles of a superconductor, which acts as the working substance. The gradual cooling down of a substrate (normal metal) in contact with the working substance is demonstrated for different initial temperatures of the substrate. Excess heat is given to a hot large-gap superconductor. The on-chip refrigerator works in a cyclic manner because of an effective thermal switching mechanism: heat transport between N-N versus N-S junctions is asymmetric because of the appearance of the energy gap. Furthermore, this switch permits selective cooling of the metal. We find that this refrigeration technique can cool down a 0.3 cm 3 block of Cu by almost 2 orders of magnitude starting from 200 mK, and down to about 1 mK starting from the base temperature of a dilution fridge (10 mK). The corresponding cooling power at 200 and 10 mK for a 1 × 1 cm 2 interface are 25 and 0.06 nW respectively, which scales with the area of the interface.
Spin-orbit coupling (SOC), which can induce spin flip during the relaxation of photoexcited charge carrier, plays a crucial role in spin dynamics. Here in this work, we have used time-domain ab initio nonadiabatic molecular dynamics (NAMD) method to study the SOC induced ultrafast demagnetization in Ni at 300K. The spin-diabatic representation using spin-polarized Kohn-Sham (KS) basis sets and spin-adiabatic representation using spinor basis sets have been applied, and both of them achieve demagnetization in Ni with a timescale around 100fs. The spin-diabatic representation suggests a picture that the electron-phonon coupling (EPC) provides direct energy relaxation channel among the same-spin states, while the SOC can induce spin flip. After photoexcitation, it is found the spin-minority electrons relax to the same-spin states rather than the opposite-spin states, since EPC is larger than SOC by one order of magnitude. By contrast, for the spin-majority electrons, spin flip occurs since there are no empty same-spin states as electron acceptor above the Fermi level. The different relaxation pathways for spin-majority and spin-minority electrons induce the demagnetization. The spin-adiabatic representation provides an Elliott-Yafet spin-phonon scattering picture. The SOC induced reduction of magnetic moment in Ni may induce magnon to drive further demagnetization. The ab initio NAMD simulation provides a critical angle to understand how the SOC and EPC affect demagnetization process in Ni.
We investigate quasi-adiabatic dynamics of charged particles in strong current sheets (SCSs) in the solar wind, including the heliospheric current sheet (HCS), both theoretically and observationally. A self-consistent hybrid model of an SCS is developed in which ion dynamics is described at the quasi-adiabatic approximation, while the electrons are assumed to be magnetized, and their motion is described in the guiding center approximation. The model shows that the SCS profile is determined by the relative contribution of two currents: (i) the current supported by demagnetized protons that move along open quasi-adiabatic orbits, and (ii) the electron drift current. The simplest modeled SCS is found to be a multi-layered structure that consists of a thin current sheet embedded into a much thicker analog of a plasma sheet. This result is in good agreement with observations of SCSs at ∼1 au. The analysis of fine structure of different SCSs, including the HCS, shows that an SCS represents a narrow current layer (with a thickness of ∼10{sup 4} km) embedded into a wider region of about 10{sup 5} km, independently of the SCS origin. Therefore, multi-scale structuring is very likely an intrinsic feature of SCSs in the solar wind.
Magnetic refrigeration is a cooling technique that uses the magnetocaloric e?ect (MCE). The active magnetic regenerator (AMR) cycle is a regenerative cycle that employs the MCE and consists of four steps: adiabatic magnetization with no heat transfer gas flow; heat transfer gas flow at constant high field; demagnetization with no heat transfer gas flow; and heat transfer gas flow at constant low field. The first heat transfer gas cold-to-hot flow step rejects heat from the magnetized regenerator to a hot sink and the second reverse heat transfer gas hot-to-cold flow step add heat from a cold source into the demagnetized regenerator. Our primary research and development objective is to use the MCE for more efficient liquefaction of much colder cryogens, to help identify problems of effective coupling of cold heat transfer gas of a single-stage reciprocating magnetic refrigerator to a process gas, we have used a single-stage active magnetic regenerative refrigerator (AMRR) with Gd refrigerant to liquefy pure propane gas at two different supply pressures. The high-purity propane was supplied from a small regulated lecture bottle at 295 K via a 1.6 mm o.d. stainless-steel tube into the helium-cooled coiled-fin tube heat exchanger at 49 psia or 27 psia, to liquefy propane at 262 K or 246 K, respectively. Propane liquefied until the small collection vessel and the coiled fin tube heat exchanger were filled at which the flow from the open lecture bottle stopped. The measured rate of liquefaction and the elapsed time for each case were measured and used to determine the volume of propane collected and the cooling power of the AMRR at the liquefaction temperatures. These cooling power results were compared to the cooling power results obtained from the curve of cool-down temperature vs. time data and agreement was excellent after the duty cycle of each cooling process was properly treated.
We report a systematic investigation of dc magnetization and ac susceptibility, as well as anisotropic magnetocaloric effect in bulk CrI 3 single crystals. A second-stage magnetic transition was observed just below the Curie temperature T c , indicating a two-step magnetic ordering. The low temperature thermal demagnetization could be well fitted by the spin-wave model rather than the single-particle model, confirming its localized magnetism. The maximum magnetic entropy change -ΔS$max\atop{M}$ ~5.65 J kg -1 K -1 and the corresponding adiabatic temperature change ΔT ad ~2.34 K are achieved from heat capacity analysis with the magnetic field up to 9 T. Anisotropy of ΔS M (T,H) was further investigated by isothermal magnetization, showing that the difference of -ΔS$max\atop{M}$ between the $ab$ plane and the c axis reaches a maximum value ~1.56 J kg -1 K -1 with the field change of 5 T. In conclusion, with the scaling analysis of ΔS M , the rescaled ΔS M (T,H) curves collapse onto a universal curve, indicating a second-order type of the magnetic transition. Furthermore, the -ΔS$max\atop{M}$ follows the power law of H n with n = 0.64 (1), and the relative cooling power depends on H m with m = 1.12 (1) .
We performed micromagnetic simulations of the current-induced domain wall motion in permalloy nanowires with rectangular cross-section. In the absence of the nonadiabatic spin-transfer term, a threshold current, J{sub c} is required to drive the domain wall moving continuously. We find that J{sub c} is proportional to the maximum cross product of the demagnetization field and magnetization orientation of the domain wall and the domain wall width. With varying both the wire thickness and width, a minimum threshold current in the order of 10{sup 6} A/cm{sup 2} is obtained when the thickness is equivalent to the wire width. With the nonadiabatic spin-transfer term, the calculated domain wall velocity {nu} equals to the adiabatic spin transfer velocity u when the current is far above the Walker limit J{sub w}. Below J{sub w}, {nu}=({beta}/{alpha})u, where {beta} is the nonadiabatic parameter and {alpha} is the damping factor. For different {beta}, we find the Walker limit can be scaled as J{sub w}=({alpha}/{beta}-{alpha})J{sub c}. Our simulations agree well with the one dimensional analytical calculation, suggesting the findings are the general behaviors of the systems in this particular geometry.