Search NASA⌕ Search

SEARCH · Search NASA

Results for “AERONAUTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Radiological Consequence Evaluation for Dragonfly Mission

The scoping calculations presented in this report were developed to provide a conservative estimate of radiological dose consequences associated with launch accidents involving one multi-mission radioisotope thermoelectric generator (MMRTG) and possibly up to 43 light-weight radioisotope heater units (LWRHUs) for the upcoming National Aeronautics and Space Administration (NASA) Dragonfly mission. This report summarizes dose consequence analysis from SAND2019-11148, “Nuclear Risk Assessment 2019 Update for the Mars 2020 Mission Environmental Impact Statement,” referred to in this document as the Mars 2020 nuclear risk analysis (NRA) and compares those results to a parametric analysis used to analyze potential dose consequences for the Dragonfly mission.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2022

Combustion Kinetics Model Development & Fluid Property Experimental Investigation For Improved Design Of Supercritical CO 2 Power Cycle Components

Supercritical carbon dioxide (sCO 2 ) cycles are being investigated for the future of power generation and will contribute to a carbon-neutral future to combat the effects of climate change. These direct-fired closed cycles will produce power without adding significant pollutants to the atmosphere. For such cycles to be efficient, they will need to operate at significantly higher pressures (e.g., 300 atm for Allam Cycle) than existing systems (typically less than 40 atm). There is limited knowledge on combustion at these high pressures and with a high dilution of carbon dioxide. Also, various experimental and computational investigations and model developments have been performed by the University of Central Florida (UCF), Embry-Riddle Aeronautical University (ERAU), and Stanford University (S.U.) to improve the current knowledge base and support the design and development of sCO 2 combustors. This project's technical aspects include chemical kinetics development, fundamental sCO 2 combustion, combustion model and sub-model development, supercritical fluid injection characterization, and heat transfer characterization.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2022

Options for Subscale Maturation of Advanced Reactor Technologies Testing for Nuclear Thermal Propulsion

Several options could be implemented to establish an irradiation testing capability suitable for investigation of the performance of multiple nuclear thermal propulsion fuel elements at prototypic conditions. The prototypic conditions of interest are based on the current needs of the National Aeronautics and Space Administration’s Space Nuclear Power Program. The results of such testing are also intended to reduce the risks currently seen for any future subscale or full-scale ground testing of an engine-reactor system. The optimal solution is dependent upon several factors such as performance, cost, availability, schedule, technology readiness level, and plans for future testing in the SNP Program. Three options, based on different combinations of these factors, are considered in this report.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Materials and Fuels Complex FY-22 – FY-26 Five-Year Mission Strategy

The Idaho National Laboratory (INL), through its designated mission of advancing innovative nuclear energy solutions, is actively engaged in the research, development, demonstration and deployment of advanced nuclear technology. Key to the success of INL’s mission is the Materials and Fuels Complex (MFC), the only complex in the U.S. that hosts a world-class assemblage of facilities, capabilities and instruments for handling, testing, and characterizing nuclear fuel and radioactive materials. Driven by its mission/vision of “Engineering and Experiments that Drive the World’s Nuclear Energy Future,” MFC is at the center of INL’s – and indeed the Department of Energy’s – advanced nuclear technology development initiatives, providing essential capabilities such as research-scale high-assay low-enriched uranium (HALEU) fuel production, reactor demonstration facilities, post-irradiation examination, and transient irradiation testing. Furthermore, MFC provides an ideal environment for test beds that are utilized for research, development and demonstration (RD&D) activities on used fuel treatment, nuclear non-proliferation, forensics, and nuclear power sources used for space exploration missions conducted by the National Aeronautics and Space Administration (NASA).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Technical Guidance for Creation of 237 NP Irradiation Target Fabrication Packages

This document describes the process used to document the fabrication of irradiation targets that may be inserted into either the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL), or the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL). The targets are being irradiated to produce 238 Pu (5.48Mev alpha decay, T1/2 = 87.7 y) used in the fabrication of radioisotope thermoelectric generators (RTGs). RTGs powered by 238 Pu are an established power source technology for National Aeronautics and Space Administration space missions where solar power is not viable. The documentation included in fabrication files demonstrates full traceability of all materials, components, and assemblies used to build 237 Np targets. To accomplish this, all documentation (e.g., certified material test reports, weld reports, leak test reports) will be maintained and reviewed throughout materials procurement, component fabrication, and target assembly.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2022

TRACER NASA Goddard Space Flight Center TOLNet Field Campaign Report

In September 2021, the National Aeronautics and Space Administration (NASA) deployed assets to the Houston, Texas region to measure air-quality-relevant constituents at high spatial and temporal resolutions. This effort was conducted in partnership with the Texas Commission on Environmental Quality, the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility-led Tracking Aerosol Convection interactions ExpeRiment (TRACER) field campaign, and several academic collaborators.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Real-Time, Simultaneous Soil Water Content and Meteorological Data Measurement to Support TRACER over Harris County, Texas (Field Campaign Report: Part I)

The main purpose of this project was to provide ground-truth and satellite-based soil water content data in the Houston, Texas, area to support the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s 2022 field campaign, the Tracking Aerosol Convection Interactions ExpeRiment (TRACER). This involved installing four soil monitoring stations at different locations in the Houston area, two of which were part of the ARM facility and two were ancillary. The two stations associated directly with ARM were installed alongside other facilities managed and maintained by the TRACER research team during the intensive operational period (IOP), one located at the La Porte, Texas airport and the other near Guy, Texas. Data from these stations were assimilated with similar data collected by the Harris County Flood Control District (HCFCD) to improve the spatial coverage of the real-time monitoring network. The ground-truth data were compared to the satellite-based (National Aeronautics and Space Administration [NASA]’s Soil Moisture Active Passive [SMAP] mission) data in the TRACER area of interest, and analyzed further to nowcast gridded data over the Houston area. The nowcasted, gridded data product was made available to TRACER researchers for use in climate and land-atmosphere interaction modeling that can help understand formation and persistence of convective storms in dense urban areas, and predict possible environmental events such as floods.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Snowstorms (IMPACTS) Field Campaign Report

The scientific focus here is interagency collaboration to support a National Aeronautics and Space Administration (NASA)-sponsored 2023 field campaign: Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Snowstorms (IMPACTS). IMPACTS objectives are to provide observations critical to understanding the mechanisms of snowband formation, organization, and evolution; study how the microphysical characteristics and likely growth mechanisms of snow particles vary across snowbands; and improve snowfall remote-sensing interpretation and modeling to significantly advance predictive capabilities. The relevance to The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility's mission was to support the Interagency Council for Advancing Meteorological Services (ICAMS)’ objectives to enhance communication and coordination, and promote sharing, within and across agencies. NASA therefore requested to borrow ARM’s two-dimensional stereo probe (2DS) for possible use during the 2023 IMPACTS project. Additionally, this use of the 2DS could improve understanding of ARM 2DS measurements collected on previous field campaigns. The plan was to have the 2DS available for possible backup deployment on the NASA Lockheed Orion P-3 aircraft during the 2023 IMPACTS field project. NASA has a 2DS probe and the ARM 2DS is a hot swappable probe in case the project's 2DS fails. The 2DS is a critical probe and we had issues during a 2022 field project that prevented us from obtaining 2DS data on several flights. Hence, we wanted a hot swappable 2DS on stand-by. We have a data acquisition system, along with a backup data acquisition system for the 2DS, so we only needed the 2DS probe. David Delene was responsible for the use of the 2DS on the NASA P-3 aircraft. He has experience deploying the 2DS on several aircraft, including previously on the NASA P-3 in 2022. The team ensured that the aircraft wiring and deployment of the 2DS were completed correctly for the ARM 2DS.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Pathways to Discovery in Astronomy and Astrophysics for the 2020s

We live in an extraordinary period of discovery in astronomy and astrophysics. Six Nobel Prizes have been awarded over the past decade alone for discoveries based on astronomical data (dark energy, gravitational waves, neutrino oscillations, the discovery of exoplanets, cosmology, and supermassive black holes). Many of the ambitious scientific visions of the 2010 New Worlds, New Horizons (Astro2010)1 decadal survey are being fulfilled, but momentum has only grown. We stand on the threshold of new endeavors that will transform not only our understanding of the universe and the processes and physical paradigms that govern it but also humanity’s place in it. This report of the Committee for a Decadal Survey on Astronomy and Astrophysics 2020 (Astro2020) proposes a broad, integrated plan for space- and ground-based astronomy and astrophysics for the decade 2023–2032.2 It also lays the foundations for further advances in the following decade. This is the seventh in a sequence of decadal survey studies in this field from the National Academies of Sciences, Engineering, and Medicine. This survey examines the program of record, providing advice on the major projects from prior surveys that are yet to be completed. It also lays out priorities for future investments driven by scientific opportunities. The recommendations in this report advance foundational activities that support the people who drive innovation and discovery, and that promote the technologies and tools needed to carry out the science. The report also recommends sustaining activities on a broad range of cost and time scales, as well as activities that enable future visionary projects by maturing them scientifically and technically. Last, the recommendations set in motion the construction of frontier facilities that will change the view and understanding of the cosmos. The survey is bounded by plausible budget scenarios based on briefings from the sponsoring agencies— the Department of Energy (DOE), the National Aeronautics and Space Administration (NASA), and the National Science Foundation (NSF). Within these bounds, the survey aims high, reflecting this time of great scientific promise and progress, with opportunities to pursue some of the most compelling scientific quests of our times.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Optimization of a Welding Procedure for Making Critical Aluminum Welds on the LBNF Absorber Core Block

he LBNF Absorber consists of thirteen 6061-T6 aluminum core blocks. The core blocks are water cooled with de-ionized (DI) water which becomes radioactive during beam operations. The cooling water flows through gun-drilled channels in the core blocks. A weld quality optimization was performed to produce National Aeronautical Standard (NAS) 1514 Class I quality welds on the aluminum core blocks. This was not successful in all cases. An existing Gas Tungsten Arc Welding (GTAW) Welding Procedure Specification (WPS) was fine tuned to minimize, in most cases, and eliminate detectable tungsten inclusions in the welds. All the weld coupons however, passed welding inspection as per the piping code: ASME B31.3 Normal Fluid Service. Tungsten electrode diameter, type, and manufacturer were varied. Some of the samples were pre-heated and others were not. It was observed that larger diameter electrodes, 5/32 in., with pre-heated joints resulted in welds with the least number of tungsten inclusions. It is hypothesized that thinner electrodes breakdown easily and get lodged into the weld pool during the welding process. This breakdown is further enhanced by the large temperature differential between the un-preheated sample and the hot electrode.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Introduction to Engage: NASA Training Session

Welcome to Engage! Engage is a capacity expansion modeling tool supported by the National Renewable Energy Laboratory and based on the Calliope open-source capacity expansion model developed by the ETH Zurich University, maintained at the TU Delft University. Engage is an accessible (free, open-access, web-hosted) and flexible web-based energy system planning application for rapid multiple-energy-form energy system scenario exploration. Its cloud-based, collaborator-sharable data model, intuitive interface and visualization capabilities facilitate collaboration and communication among teams, with experts, and among diverse stakeholder groups exploring energy system implications from district to national-scale models. This training session was presented to the National Aeronautics and Space Administration (NASA) to help them understand how capacity expansion modeling can help them develop single site/distribution analysis of energy to regional airports.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

NASA Nuclear Thermal Propulsion: Thermodynamics of Zircaloy-4 Hydride

Nuclear thermal propulsion (NTP) is explored as a candidate technology by National Aeronautics and Space Administration (NASA) for Mars and other deep space missions. NTP reactors operate by passing its propellent, hydrogen, through a nuclear reactor. The nuclear reactor transfers energy to the hydrogen before hydrogen expands to generate thrust.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Using satellite data to assess Hurricane Helene’s impact on vegetation by land use in the CSRA

Many regions within Georgia, South Carolina, and North Carolina experienced record-breaking rainfall and catastrophic winds due to Hurricane Helene. Helene made landfall on Florida’s big bend on September 26 th , 2024, as a category 4 hurricane, and tracked northward through Georgia and the southern Appalachian Mountains before dissipating on September 29 th , 2024. One significant impact of the hurricane was severe damage to tree canopies across the southeastern United States. This study utilizes satellite-based remotely sensed data provided by the National Aeronautical and Space Administration (NASA) to examine the resilience of these tree canopies following the hurricane. Specifically, the Normalized Difference Vegetation Index (NDVI), Leaf Area Index (LAI), Land Cover Type, Soil Moisture Active Passive (SMAP), and the Global Precipitation Measurement (GPM) mission datasets were employed to study the tree canopy’s response to such events in the Central Savannah River Area (CSRA). A significant increase was observed in the LAI in November of 2024. This increase in LAI was likely influenced by warmer-than-average temperatures throughout October of 2024, along with a second record-breaking rainfall event in the CSRA on November 6th, 2024. The LAI increase was then broken down into land cover type to understand which areas contributed most. The complex nature and resilience of trees became evident, offering opportunities for further exploration and application in urban planning, emergency response, and environmental management.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

WHYMSIE-SGP Field Campaign Report

Through a partnership between the U.S. National Aeronautics and Space Administration (NASA) and the National Oceanic and Atmospheric Administration (NOAA), this field campaign demonstrated first-of-its-kind hyperspectral microwave airborne measurements (Conical Scanning Millimeter-wave Imaging Radiometer [CoSMIR-H]). It was complemented by other passive (infrared, visible) and active (lidar) sensors onboard the NASA ER-2 aircraft. Serving as a future NASA planetary boundary-layer (PBL) mission prototype, the Westcoast and Heartland Hyperspectral Microwave Intensive Experiment (WH 2 yMSIE, formerly WHyMSIE) aimed to capture a wide variety of thermodynamic, moisture, and PBL regimes across a variety of surface types. The intensive operating period of the campaign spanned from October 22, 2024, through November 15, 2024, and included a large network of collaborators.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Additively Manufactured Pressure Limiting Irradiation Capsule for the High Flux Isotope Reactor

The Advanced Materials and Manufacturing Technologies (AMMT) program previously demonstrated an additively manufactured (AM) irradiation capsule (commonly referred to as a “rabbit”) from 316H stainless steel (SS) for insertion into the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL)1. This report details efforts to design and fabricate an AM pressure limiting structure (PLS) into one of the end caps of a rabbit capsule and qualify it for insertion into HFIR. The PLS includes a thin cylindrical rupture wall, a shield, and internal supports to facilitate printing and ensure mechanical integrity. Its overall dimensions are 9-mm tall and 10-mm in diameter— equivalent to about one-fourth of the size of a AAA battery. The PLS maintains safe internal operating pressures for a rabbit capsule while in the reactor. Although this application is specific to HFIR, the approach lends itself to further applications in industrial, aeronautical, advanced space and power generation environments. Several PLS rabbits capsules have been successfully designed, fabricated, pressure tested, and qualified for future insertion into the HFIR for irradiation and post-irradiation evaluation.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

Radioisotope Science and Technology Division FY 2025 Core R&D Summary Report: Competitive Projects, Postdoctoral Researchers, and Student Interns

R&D efforts in support of the Oak Ridge National Laboratory (ORNL) Isotope Program Radioisotope Portfolio are led by the Radioisotope Science and Technology Division (RSTD). In addition to supporting the ORNL Isotope Program Radioisotope Portfolio, RSTD supports a portfolio of research related to fundamental properties of radioisotopes and radioisotope applications, including diagnostic and therapeutic uses of medical radioisotopes, radioisotopes for national security, and the production of 238 Pu for the National Aeronautics and Space Administration (NASA) and US Department of Energy (DOE) Office of Nuclear Energy. RSTD is organized into functional science and engineering groups, with most staff members supporting multiple programs. The goal of this organization is to enable synergy between programs such that R&D advances coming from other programs may provide benefit to the ORNL Isotope Program. R&D within RSTD is focused around addressing five grand challenges, as documented in the strategic plan for the DOE Office of Isotope R&D and Production, or DOE Isotope Program (IP), Radioisotope Production R&D activities at ORNL: 1. Maximizing the scientific output of radioisotope transmutation resources, 2. Maximizing the scientific output of radioisotope processing resources, 3. Minimizing waste and having optimal waste disposition, 4. Focusing on product quality and reliability, and 5. Expanding the use of beneficial isotopes. The ORNL Core R&D program, one of the primary R&D components within the ORNL Isotope Program Radioisotope Portfolio, ranges from benchtop to demonstration activities, with a focus on researching enhanced production techniques, developing emerging isotopes, and developing the talent pipeline for radioisotope science and technology. Projects within the Core R&D Program are led primarily by RSTD staff members. In supporting enhanced production techniques, the Core R&D program presents an opportunity to fund novel R&D that might not be tied to a specific radioisotope product but still presents a high potential for broad applicability in the longer term. In supporting the development of emerging isotopes, the Core R&D program develops high-priority isotopes that are not able to be fully supported through production funds.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2022

Fuel Fabrication Capability Assessment in Support of Advanced Reactor Deployments

More than 30 U.S. companies are designing a variety of advanced reactor concepts, and several companies are planning to demonstrate their reactor designs in the mid-2020s to late 2030s time frame. In 2020, the U.S. Department of Energy (DOE) announced a series of awards under the Advanced Reactor Demonstration Program (ARDP) to accelerate the successful deployment of 10 of these reactors under three pathways. TerraPower and X-energy were awarded grants under the Advanced Reactor Demonstration Program to deploy their respective Natrium reactor and Xe-100 reactor designs in the next 7–10 years. These demonstrations are in addition to several parallel programs, including the U.S. Department of Defense’s (DoD’s) interest in the development of microreactors, and interest of the National Aeronautics and Space Administration in space nuclear power and propulsion. The National Reactor Innovation Center’s (NRIC’s) mission is to accelerate the demonstration and deployment of advanced reactors; NRIC is partnering with several reactor developers and harnessing the world-class capabilities of the U.S. National Laboratory system to deliver on its mission. Several of these reactor designs will require advanced fuel forms that are not commercially available today, including metal fuel, molten salt fuel, TRi-structural ISOtropic (TRISO) particle fuel, and uranium nitride fuel. Recognizing that there may be potential gaps in the laboratory-scale process development and pilot-scale first-of-a-kind (FOAK) production of these fuel forms leading to delivery of the FOAK cores, NRIC commissioned this study to look at the challenges that need to be overcome for successful deliveries, including the evaluation of existing facilities and the potential need for a new fuel fabrication facility.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Southern Hemisphere Polar Infrared Radiation Experiment (SHIRE) Field Campaign Report

An extended-range atmospheric emitted radiance interferometer (AERI) instrument to be deployed to Scott Base (78 S, 166 E) in McMurdo Sound, Antarctica for the purpose of synergizing with the National Aeronautics and Space Administration (NASA) Polar Radiant Energy in the Far-InfraRed Experiment (PREFIRE) satellite mission (https://prefire.ssec.wisc.edu/), examining the closure of atmospheric thermal emission, and providing validation for PREFIRE. The PREFIRE mission is the first satellite mission to map Earth’s spectrally resolved thermal emission, from 5 to 50 microns, over seasonal to annual timescales. These new observations represent the beginning of an intensive examination of the nature of thermal emission from Earth (emission from both the surface and atmosphere). A primary requirement of the PREFIRE mission is to provide validation of the retrieved variables. Numerous field sites in the Arctic (such as the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) North Slope of Alaska observatory and Summit Station, Greenland) have existing instrumentation to facilitate validation, leaving an observational gap in Antarctica. Through SHIRE, we propose to establish a temporary, intensive measurement site in Antarctica to ensure that both poles are suitably represented, and benefit from this state-of-the art science. This will also allow Arctic and Antarctic atmospheric radiative states to be compared and contrasted. For SHIRE specifically, we also propose further objectives to examine the spectrally resolved thermal radiative closure of the polar atmosphere and the historical changes in Antarctic radiative forcing, using previous Antarctic field campaigns, such as the ARM West Antarctic Radiation Experiment (AWARE).

54 ENVIRONMENTAL SCIENCES↗