Search NASA⌕ Search

SEARCH · Search NASA

Results for “ARSENIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Morphology dependence of interfacial oxidation states of gallium arsenide under near ambient conditions

The manipulation of semiconductor surfaces by tuning their electronic properties and surface chemistry is an essential ingredient for key applications in areas such as electronics, sensors, and photovoltaic devices. Here, in-situ surface reactions on gallium arsenide (GaAs) are monitored for two morphologies: a simple planar crystalline surface with (100) orientation and an ensemble of GaAs nanowires, both exposed to oxygen environment. A variety of oxide surface species, with a significant enhancement in oxidation states in the case of nanowires, are detected via near ambient pressure X-ray photoelectron spectroscopy. This enhancement in oxidation of GaAs nanowires is due to their higher surface area and the existence of more active sites for O{sub 2} dissociation.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Indium arsenide nanowire field-effect transistors for pH and biological sensing

Indium Arsenide is a high mobility semiconductor with a surface electron accumulation layer that allows ohmic electrical contact to metals. Here, we present nanowire devices based on this material as a platform for chemical and biological sensing. The sensing principle involves the binding of a charged species at the sensor surface transduced via field effect into a change in current flowing through the sensor. We show the sensitivity of the platform to the H{sup +} ion concentration in solution as proof of principle and demonstrate the sensitivity to larger charged protein species. The sensors are highly reproducible and reach a detection limit of 10 pM for Avidin.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

One-dimensional behavior and high thermoelectric power factor in thin indium arsenide nanowires

Electrical conductivity and Seebeck coefficient of quasi-one-dimensional indium arsenide (InAs) nanowires with 20 nm diameter are investigated. The carrier concentration of the passivated nanowires was modulated by a gate electrode. A thermoelectric power factor of 1.7 × 10{sup −3} W/m K{sup 2} was measured at room temperature. This value is at least as high as in bulk-InAs and exceeds by far typical values of thicker InAs nanowires with three-dimensional properties. The interpretation of the experimental results in terms of power-factor enhancement by one-dimensionality is supported by model calculations using the Boltzmann transport formalism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Wide band gap gallium arsenide nanoparticles fabricated using plasma method

In this paper, we have reported the fabrication of gallium arsenide (GaAs) nanoparticles on quartz placed at distance of 4.0 cm, 5.0 cm and 6.0 cm, respectively from top of anode. The fabrication has been carried out by highly energetic and high fluence ions of GaAs produced by hot, dense and extremely non-equilibrium plasma in a modified dense plasma focus device. GaAs nanoparticles have mean size of about 23 nm, 16 nm and 14 nm for deposition at a distance of 4.0 cm, 5.0 cm and 6.0 cm, respectively. The nanoparticles are crystalline in nature as evident from X-ray diffraction patterns. The band gap of nanoparticles is found to increase from 1.425 eV to 5.37 eV at 4.0 cm distance, which further increases as distance increases. The wide band gap observed for fabricated GaAs nanoparticles suggest the possible applications of nanoparticles in laser systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Carrier mobilities of (001) cadmium arsenide films

We investigate (001)-oriented films of the topological semimetal cadmium arsenide (Cd 3 As 2 ) grown by molecular beam epitaxy on lattice-matched III–V Al x In 1-x Sb buffer layers. Magnetotransport studies and analysis of thin film microstructures are used to determine the influence of dislocations on their carrier mobilities. We show that only a minority of the threading dislocations present in the buffer layers extend into the Cd 3 As 2 films. Threading dislocations are shown to reduce the mobilities of carriers residing in the topological surface states, while bulk transport was unaffected by a change in the dislocation density across an order of magnitude. Thick (001) Cd 3 As 2 films exhibit electron mobilities of up to 41 000 cm 2 V -1 s -1 at 2 K. The results provide insights into the influence of extended defects on the transport properties of a prototype topological semimetal.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Optical properties of cubic boron arsenide

The ultrahigh thermal conductivity of cubic boron arsenide (BAs) makes it a promising material for next-generation electronics and optoelectronics. Here, we report measured optical properties of BAs crystals, including the complex dielectric function, refractive index, and absorption coefficient in the ultraviolet, visible, and near-infrared wavelength range. In this work, the data were collected at room temperature using spectroscopic ellipsometry and transmission and reflection spectroscopy. We further calculated the optical response using density functional theory and many-body perturbation theory, considering quasiparticle and excitonic corrections. The computed values for the direct and indirect bandgaps (4.25 eV and 2.07 eV) agree well with the measured results (4.12 eV and 2.02 eV). Our findings pave the way for using BAs in future electronic and optoelectronic applications that take advantage of its demonstrated ultrahigh thermal conductivity and predicted high ambipolar carrier mobility.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Magnetoresistance effects in cadmium arsenide thin films

In-plane magnetoresistance effects in the three-dimensional Dirac semimetal cadmium arsenide are studied as a function of film growth orientation, film thickness and surface Fermi level. For films with the Fermi level near the bulk nodes, which are gapped for very thin films, a pronounced planar Hall effect is observed due to the combination of magnetoresistance effects from the Berry phase and orbital magnetoresistance. At high Fermi levels, surface state transport produces weaker magnetoresistance effects. Furthermore, the results are discussed in the context of detecting signatures of the chiral anomaly.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Detecting topological phase transitions in cadmium arsenide films via the transverse magnetoresistance

Topological protection against localization causes electrical transport phenomena in disordered topological materials to differ from those in topologically trivial systems. For example, a transition between a regime of weak localization to one of weak antilocalization can occur in systems such as topological insulators and topological semimetals when an external potential is applied across the system. Here, we report on the transverse magnetoresistance of thin films of cadmium arsenide, a topological non-trivial material, as we tune the electronic states and the Fermi level. We show that the appearance of weak localization and weak antilocalization sensitively reflects the relative contributions of multiple transport channels involving both gapless (massless) and gapped (massive) Dirac fermion states present in these films. Furthermore, the data is consistent with expectations of the different topological states of these films. Weak (anti-) localization phenomena can therefore serve as a probe of the types of Dirac fermions present in topological semimetals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Induced superconductivity in the two-dimensional topological insulator phase of cadmium arsenide

Hybrid structures between conventional, s-wave superconductors, and two-dimensional topological insulators (2D TIs) are a promising route to topological superconductivity. Here, we investigate planar Josephson junctions fabricated from hybrid structures that use thin films of cadmium arsenide (Cd3As2) as the 2D TI material. Measurements of superconducting interference patterns in a perpendicular magnetic field are used to extract information about the spatial distribution of the supercurrent. We show that the interference patterns are distinctly different in junctions with and without mesa-isolation. In mesa-defined junctions, the bulk of the 2D TI appears to be almost completely shunted by supercurrent flowing along the edges, whereas the supercurrent is much more uniform across the junction when the Cd3As2 film extends beyond the device. We discuss the possible origins of the observed behaviors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Photothermoelectric effect in cadmium arsenide thin films for unbiased, mid-infrared photodetection

Mid-infrared photodetectors that can operate at room temperature are of great interest for a wide range of applications. Here, we demonstrate unbiased, mid-infrared (10.4 μm) photodetection in epitaxial thin films of the three-dimensional Dirac semimetal cadmium arsenide (Cd 3 As 2 ), which are grown on a III–V heterostructure. We show that the photocurrent response of planar metal–Cd 3 As 2 –metal devices is consistent with the photothermoelectric effect, which is due to a temperature gradient that develops under asymmetric illumination of the device. We show that the photoresponsivity of Cd 3 As 2 channel devices is an order of magnitude greater than devices with a III–V semiconductor channel, attesting to the excellent thermoelectric properties of Cd 3 As 2 and promising efficient unbiased, room-temperature mid-infrared photodetection.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Strain-induced topological transitions in epitaxial films of cadmium arsenide

Strain in epitaxial thin films can have a profound influence on their electronic bands. Here, we investigate the influence of epitaxial strains on the electronic states of (001)-oriented cadmium arsenide (Cd 3 As 2 ) thin films, which are two-dimensional topological insulators. Cd 3 As 2 films were grown coherently on Al 1−x In x Sb buffer layers with varying degrees of lattice mismatch to Cd 3 As 2 , producing in-plane stresses that ranged from compressive to tensile. Using magneto-transport measurements of the Landau levels of the lowest subbands, we show that films under compression remain in the two-dimensional topological insulator state, while a sufficiently large tensile stress induces a transition to a topologically trivial phase. These results qualitatively agree with expectations from theoretical models for these films. At the topological transition, the gap avoids completely closing, and we discuss possible origins.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Study of Gallium Arsenide Etching in a DC Discharge in Low-Pressure HCl-Containing Mixtures

Halogen-containing plasmas are often used to form topological structures on semiconductor surfaces; therefore, spectral monitoring of the etching process is an important diagnostic tool in modern electronics. In this work, the emission spectra of gas discharges in mixtures of hydrogen chloride with argon, chlorine, and hydrogen in the presence of a semiconducting gallium arsenide plate were studied. Spectral lines and bands of the GaAs etching products appropriate for monitoring the etching rate were determined. It is shown that the emission intensity of the etching products is proportional to the GaAs etching rate in plasmas of HCl mixtures with Ar and Cl{sub 2}, which makes it possible to monitor the etching process in real time by means of spectral methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Study of the structure of a thin aluminum layer on the vicinal surface of a gallium arsenide substrate by high-resolution electron microscopy

The results of electron-microscopy studies of a thin epitaxial aluminum layer deposited onto a misoriented gallium-arsenide substrate are reported. It is established that the layer consists of differently oriented grains, whose crystal lattices are coherently conjugated with the substrate with the formation of misfit dislocations, as in the case of a layer on a singular substrate. Atomic steps on the substrate surface are visualized, and their influence on the growth of aluminum crystal grains is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Optical Transitions from Core d Levels of Gallium Arsenide

An improved parameter-free method of joint Argand diagrams was used to expand the permittivity spectrum of gallium arsenide in a region of 19–26 eV into 12 bands of optical transitions with determining their maximum and half-width energies, as well as the oscillator strengths. The values of oscillator strengths of the obtained bands lie within an interval from 0.0009 to 0.06. In the regions of 19.2–21.3 and 24–26 eV, the permittivity spectrum was preliminarily calculated on the basis of experimental reflectance spectra with the use of the Kramers–Kronig integral relation method. The nature of the obtained transition bands is suggested in terms of the band-to-band and exciton transitions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗