Search NASA⌕ Search

SEARCH · Search NASA

Results for “Accretion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

The evidence for clumpy accretion in the Herbig Ae star HR 5999

Analysis of IUE high- and low-dispersion spectra of the young Herbig Ae star HR 5999 (HD 144668) covering 1978-1992 revealed dramatic changes in the Mg II h and k (2795.5, 2802.7 A) emission profiles, changes in the column density and distribution in radial velocity of accreting gas, and flux in the Ly(alpha), O I, and C IV emission lines, which are correlated with the UV excess luminosity. Variability in the spectral type inferred from the UV spectral energy distribution, ranging from A5 IV-III in high state to A7 III in the low state, was also observed. The trend of earlier inferred spectral type with decreasing wavelength and with increasing UV continuum flux has previously been noted as a signature of accretion disks in lower mass pre-main sequence stars (PMS) and in systems undergoing FU Orionis-type outbursts. Our data represent the first detection of similar phenomena in an intermediate mass (M greater than or equal to 2 solar mass) PMS star. Recent IUE spectra show gas accreting toward the star with velocities as high as plus 300 km/s, much as is seen toward beta Pic, and suggest that we also view this system through the debris disk. The absence of UV lines with the rotational broadening expected given the optical data (A7 IV, V sini=180 plus or minus 20 km/s for this system) also suggests that most of the UV light originates in the disk, even in the low continuum state. The dramatic variability in the column density of accreting gas, is consistent with clumpy accretion, such as has been observed toward beta Pic, is a hallmark of accretion onto young stars, and is not restricted to the clearing phase, since detectable amounts of accretion are present for stars with 0.5 Myr less than t(sub age) less than 2.8 Myr. The implications for models of beta Pic and similar systems are briefly discussed.

Perez, M. R.↗
NASA NTRS1994

Evolution of dynamo-generated magnetic fields in accretion disks around compact and young stars

Geometrically thin, optically thick, turbulent accretion disks are believed to surround many stars. Some of them are the compact components of close binaries, while the others are throught to be T Tauri stars. These accretion disks must be magnetized objects because the accreted matter, whether it comes from the companion star (binaries) or from a collapsing molecular cloud core (single young stars), carries an embedded magnetic field. In addition, most accretion disks are hot and turbulent, thus meeting the condition for the MHD turbulent dynamo to maintain and amplify any seed field magnetic field. In fact, for a disk's magnetic field to persist long enough in comparison with the disk viscous time it must be contemporaneously regenerated because the characteristic diffusion time of a magnetic field is typically much shorter than a disk's viscous time. This is true for most thin accretion disks. Consequently, studying magentic fields in thin disks is usually synonymous with studying magnetic dynamos, a fact that is not commonly recognized in the literature. Progress in studying the structure of many accretion disks was achieved mainly because most disks can be regarded as two-dimensional flows in which vertical and radial structures are largely decoupled. By analogy, in a thin disk, one may expect that vertical and radial structures of the magnetic field are decoupled because the magnetic field diffuses more rapidly to the vertical boundary of the disk than along the radius. Thus, an asymptotic method, called an adiabatic approximation, can be applied to accretion disk dynamo. We can represent the solution to the dynamo equation in the form B = Q(r)b(r,z), where Q(r) describes the field distribution along the radius, while the field distribution across the disk is included in the vector function b, which parametrically depends on r and is normalized by the condition max (b(z)) = 1. The field distribution across the disk is established rapidly, while the radial distribution Q(r) evolves on a considerably longer timescale. It is this evolution that is the subject of this paper.

Stepinski, Tomasz F.↗
NASA NTRS1995

Propagation of nuclear burning fronts on accreting neutron stars: X-ray bursts and sub-hertz noise

We identify a new regime of time dependent helium burning for high accretion rate neutron stars and suggest that this burning is the origin of the low-level luminosity variations (on timescales of 10-10(exp 4) s, designated the 'very low-frequency noise'(VLFN) by van der Klis and collaborators) always detected in the brightest accreting X-ray sources. Only two nuclear burning regimes were previously recognized. At accretion rates in excess of the Eddington limit (dot-M approximately greater than (1-3) x 10(exp -8) solar mass/yr), the accreted matter fuses steadily. At very low dot-M, the star's entire surface is rapidly (approximately less than 10 s) burned by a fast propagating convective burning front at regular intervals, giving quasi-periodic Type I X-ray bursts. We show that for the observationally interesting range of 5 x 10(exp -10) solar mass/yr approximately less than dot-M approximately less than 10(exp -8) solar mass/yr, parts of the stellar surface burn slowly. At these accretion rates, a local thermonuclear instability starts a fire which propagates horizontally at v approximately 300 cm/s. The fire propagates around the flammable surface in roughly the same time it takes to accrete enough fuel for the next instability (approximately 10(exp 3)-10(exp 4), so that only a few fires are burning at once, giving rise to large luminosity flares. Nuclear burning is always time dependent for sub-Eddington local accretion rates: a local patch undergoes a recurrent cycle, accumulation fuel for hours until it becomes thermally unstable or is 'ignited' by a nearby burning region. The global pattern of burning and the resulting luminosity are thus very dependent on how fast nuclear fires spread around the star. The nuclear burning luminosity is not uniform over the stellar surface and so may provide a handle on measuring, or constraining, the spin periods of these neutron stars.

Bildsten, Lars↗
NASA NTRS1995

The evolutionary thermal response of a white dwarf to compressional heating by periodic dwarf nova accretion events

The thermal response of the underlying white dwarf in a cataclysmic variable to the periodic deposition of mass by a dwarf nova accretion event is simulated with a quasi-static stellar evolution code incorporating time variable accretion. After accretion at rates typical of dwarf nova outbursts (approx. 10(exp -7) to 10(exp -8)/yr) for outburst durations of days to 2 weeks, the radial infall is shut off and the evolution of the white dwarf is followed during dwarf nova quiescence. The matter is assumed to accrete softly with the same entropy as the white dwarf outer layers. In some sequences accretion is resumed and shut off repeatedly at intervals of months to simulate the thermal evolution of the white dwarf in typical dwarf novae such as SS Cygni and U Geminorum, between successive dwarf nova outbursts. Thermal timescales for white dwarf cooling following a given dwarf nova outburst depend upon the accretion rate, outburst duration, and white dwarf mass; they are nominally in the range 0.2-0.8 years for parameters typical of dwarf novae (white dwarf masses in the range 1.2-0.6 solar mass, outburst accretion rates in the range 1 x 10(exp -7)-10(exp -8) solar mass/yr, outburst durations in the range 7-14, days and quiescent intervals of 30-300 days). If the e-folding timescale of the white dwarf cooling is shorter than the quiescent interval bewteen outbursts, then the effect of compressional heating is too small to be observationally detectable.

Sion, Edward M.↗
NASA NTRS1995

Accretion disk boundary layers in cataclysmic variables. 1: Optically thick boundary layers

We develop numerical models of accretions disks in cataclysmic variables (CVs), including and emphasizing the boundary layer region where the accretion disk meets the accreting white dwarf. We confine ourselves to solutions where the boundary layer region is vertically optically thick, and find that these solutions share several common features. The angular and radial velocities of the accreting material drop rapidly in a dynamical boundary layer, which has a radial width approximately 1%-3% of the white dwarf radius. The energy dissipated in this region diffuses through the inner part of the disk and is radiated from the disk surface in a thermal boundary layer, which has a radial width comparable to the disk thickness, approximately 5%-15% of the white dwarf radius. We examine the dependence of the boundary layer structure on the mass accretion rate, the white dwarf mass and rotation rate, and the viscosity parameter alpha. We delineate the boundary between optically thick and optically thin boundary layer solutions as a function of these parameters and suggest that by means of a careful comparison with observations it may be possible to estimate alpha in CVs. We derive an expression for the total boundary layer luminosities as a function of the parameters and show that it agrees well with the luminosites of our numerical solutions. Finally, we calcuate simple blackbody continuum spectra of the boundary layer and disk emission for our solutions and compare these to soft X-ray, EUV, and He II emission-line observations of CVs. We show that, through such comparisons, it may be possible to determine the rotation rates of the accreting stars in CVs, and perhaps also the white dwarf masses and the accretion rates. The spectra are quite insensitive to alpha, so the uncertainty in this parameter does not affect such comparisons.

Popham, Robert↗
NASA NTRS1995

Extreme ultraviolet spectroscopy and photometry of VV Puppis during a high accretion state

We determine the physical properties of the accretion region of the AM Her-type binary VV Puppis using extreme ultraviolet (EUV) medium-resolution spectroscopy and photometry obtained with the Extreme Ultraviolet Explorer (EUVE) observatory. The EUV continuum from VV Pup was detected in the wavelength range from 75 to 135 A and was simultaneously recorded with the Deep Survey/Spectrometer (DS/S) imaging telescope, allowing for the extraction of an accurate light curve. VV Pup appeared to have entered a high-accretion state just prior to the pointed EUVE observations. We use the EUV light curve to infer the diameter of the accretion region (d = 220 km) assuming a hemispherical geometry and a radius of 9000 km for the white dwarf. We perform a model atmosphere analysis and, based on the light curve properties and assuming a distance of 145 pc, we derive an effective temperature of the accretion region in the range 270,000 is less than T(sub eff) is less than 360,000 K and a neutral hydrogen column density in the local interstellar medium of n(sub H) = 1.9 - 3.7 x 10(exp 19)/sq cm. The total EUV/soft X-ray energy radiated by the accretion region is approximately 3.5 x 10(exp 32) ergs/s. Our results provide a first verification of past suggestions that deep heating of the white dwarf surface produces the soft X-ray flux from the polars. We present a possible detection of O VI absortion features, and we suggest that extensive EUVE observations targeting high-accretion events may result in oxygen and heavier element abundance determination in the accretion region.

Vennes, Stephane↗
NASA NTRS2001

A Realistic Accretion Disk Model for AGNs

We present a new relativistic accretion disk model of AGNs, based on alpha modified accretion disk theory, where alpha is a parameter that characterizes the efficiency of the mechanism of angular momentum transport. In this model we have considered a geometrically-thin, high-luminosity (alpha-accretion disk, around a supermassive black hole. The geometrically thin limit assumes a local energy balance within the accretion disk, which has been used to derive the plasma temperature of the disk. The energy balance equation has three solutions: low, medium and high temperature, depending on the heating rate of the accretion disk. We predict that the inner part of a high luminosity accretion disk is in the high- temperature (10(exp 7) to 10(exp 9) K) state and for this we obtain the high temperature solution of the energy balance equation using a Comptonization process. We find the local spectrum of each ring of the disk (we have divided the high temperature region of the disk into 50 rings) to be a diluted Wien spectrum. However, the emergent integral spectrum of the high temperature region is a power-law with a high-energy cutoff that depends on the basic parameters of AGNs (the accretion rate, the incidence angle, and the mass and the angular momentum of the central black hole). We have fitted the observed spectra of 28 AGNs using the present model and have derived the values of the basic parameters of these AGNs. Results of these spectral fittings have been discussed in the framework of the unification model of AGNs.

Suleimanov, V.↗
NASA NTRS2001

Continued Investigations of the Accretion History of Extraterrestrial Matter over Geologic Time

This grant supported our ongoing project to characterize the accretion rate of interplanetary dust particles (IDPs) to Earth over geologic time using He-3 as a tracer. IDPs are derived from collisions in the asteroid belt and from disaggregation of active comets. Owing to their small size (few to few hundred micrometers diameter) these particles spiral into the sun under Poynting-Robertson drag typically in less than a few tens of kyrs. Thus IDPs must be continually resupplied to the zodiacal cloud, and because the processes of IDP production are likely to be sporadic, time variation in the IDP accretion rate to Earth is likely to be time-varying. For example, major asteroidal collisions and comet showers should greatly enhance the IDP accretion rate. Our ultimate objective (still ongoing) is to document this time variance so as to better understand the history of the solar system, the source of IDPs accreting to Earth, and the details of the mechanism by which particles are captured by Earth. To document variations in IDP accretion rate through time we use He-3 as a tracer. This isotope is in extremely low abundance in terrestrial matter, but IDPs have very high concentrations of He-3 from implantation of solar wind ions. By measuring He-3 in seafloor sediments, we can estimate the IDP accretion rate for at least the last few hundred Myrs. Under an earlier NASA grant we identified the existence of a large increase in He-3 flux in the Late Eocene (35 Myr ago), coincident with the two largest impact craters of the Cenozoic Era. The simplest interpretation of this observation is the occurrence of a shower of long period comets at that time, simultaneously increasing the impact cratering probability and accretion rate of IDPs to Earth (Farley et al., 1998). Comet showers produced by stellar perturbation of the Oort cloud should be fairly common in the geologic record, so this is not an unreasonable interpretation of our observations.

Farley, Kenneth↗
NASA NTRS2004

Accretion onto Fast X-Ray Pulsars

The recent emergence of a new class of accretion-powered, transient, millisecond X-ray pulsars presents some difficulties for the conventional picture of accretion onto rapidly rotating magnetized neutron stars and their spin behavior during outbursts. In particular, it is not clear that the standard paradigm can accommodate the wide range in M(i.e., approx. greater than a factor of 50) over which these systems manage to accrete and the high rate of spindown that the neutron stars exhibit in at least a number of cases. When the accretion rate drops sufficiently, the X-ray pulsar is said to become a "fast rotator," and in the conventional view, this is accompanied by a transition from accretion to "propellering," in which accretion ceases and the matter is ejected from the system. On the theoretical side, we note that this scenario for the onset of propellering cannot be entirely correct because it is not energetically self-consistent. We show that, instead, the transition is likely to take place through disks that combine accretion with spindown and terminate at the corotation radius. We demonstrate the existence of such disk solutions by modifying the Shakura-Sunyaev equations with a simple magnetic torque prescription. The solutions are completely analytic and have the same dependence on M and a (the viscosity parameter) as the original Shakura-Sunyaev solutions, but the radial profiles can be considerably modified, depending on the degree of fastness. We apply these results to compute the torques expected during the outbursts of the transient millisecond pulsars and find that we can explain the large spin-down rates that are observed for quite plausible surface magnetic fields of approx. 10(exp 90 G.

Rappaport, S. A.↗
NASA NTRS2011

Modeling the Effects of Ice Accretion on the Low Pressure Compressor and the Overall Turbofan Engine System Performance

The focus of this study is on utilizing a mean line compressor flow analysis code coupled to an engine system thermodynamic code, to estimate the effects of ice accretion on the low pressure compressor, and quantifying its effects on the engine system throughout a notional flight trajectory. In this paper a temperature range in which engine icing would occur was assumed. This provided a mechanism to locate potential component icing sites and allow the computational tools to add blockages due to ice accretion in a parametric fashion. Ultimately the location and level of blockage due to icing would be provided by an ice accretion code. To proceed, an engine system modeling code and a mean line compressor flow analysis code were utilized to calculate the flow conditions in the fan-core and low pressure compressor and to identify potential locations within the compressor where ice may accrete. In this study, an "additional blockage" due to the accretion of ice on the metal surfaces, has been added to the baseline aerodynamic blockage due to boundary layer, as well as the blade metal blockage. Once the potential locations of ice accretion are identified, the levels of additional blockage due to accretion were parametrically varied to estimate the effects on the low pressure compressor blade row performance operating within the engine system environment. This study includes detailed analysis of compressor and engine performance during cruise and descent operating conditions at several altitudes within the notional flight trajectory. The purpose of this effort is to develop the computer codes to provide a predictive capability to forecast the onset of engine icing events, such that they could ultimately help in the avoidance of these events.

Veres, Joseph P.↗
NASA NTRS2016

Ice-Accretion Test Results for Three Large-Scale Swept-Wing Models in the NASA Icing Research Tunnel

Icing simulation tools and computational fluid dynamics codes are reaching levels of maturity such that they are being proposed by manufacturers for use in certification of aircraft for flight in icing conditions with increasingly less reliance on natural-icing flight testing and icing-wind-tunnel testing. Sufficient high-quality data to evaluate the performance of these tools is not currently available. The objective of this work was to generate a database of ice-accretion geometry that can be used for development and validation of icing simulation tools as well as for aerodynamic testing. Three large-scale swept wing models were built and tested at the NASA Glenn Icing Research Tunnel (IRT). The models represented the Inboard (20 percent semispan), Midspan (64 percent semispan) and Outboard stations (83 percent semispan) of a wing based upon a 65 percent scale version of the Common Research Model (CRM). The IRT models utilized a hybrid design that maintained the full-scale leading-edge geometry with a truncated afterbody and flap. The models were instrumented with surface pressure taps in order to acquire sufficient aerodynamic data to verify the hybrid model design capability to simulate the full-scale wing section. A series of ice-accretion tests were conducted over a range of total temperatures from -23.8 to -1.4 C with all other conditions held constant. The results showed the changing ice-accretion morphology from rime ice at the colder temperatures to highly 3-D scallop ice in the range of -11.2 to -6.3 C. Warmer temperatures generated highly 3-D ice accretion with glaze ice characteristics. The results indicated that the general scallop ice morphology was similar for all three models. Icing results were documented for limited parametric variations in angle of attack, drop size and cloud liquid-water content (LWC). The effect of velocity on ice accretion was documented for the Midspan and Outboard models for a limited number of test cases. The data suggest that there are morphological characteristics of glaze and scallop ice accretion on these swept-wing models that are dependent upon the velocity. This work has resulted in a large database of ice-accretion geometry on large-scale, swept-wing models.

Wing Aerodynamics↗
NASA NTRS2016

Ice-Accretion Test Results for Three Large-Scale Swept-Wing Models in the NASA Icing Research Tunnel

Icing simulation tools and computational fluid dynamics codes are reaching levels of maturity such that they are being proposed by manufacturers for use in certification of aircraft for flight in icing conditions with increasingly less reliance on natural-icing flight testing and icing-wind-tunnel testing. Sufficient high-quality data to evaluate the performance of these tools is not currently available. The objective of this work was to generate a database of ice-accretion geometry that can be used for development and validation of icing simulation tools as well as for aerodynamic testing. Three large-scale swept wing models were built and tested at the NASA Glenn Icing Research Tunnel (IRT). The models represented the Inboard (20% semispan), Midspan (64% semispan) and Outboard stations (83% semispan) of a wing based upon a 65% scale version of the Common Research Model (CRM). The IRT models utilized a hybrid design that maintained the full-scale leading-edge geometry with a truncated afterbody and flap. The models were instrumented with surface pressure taps in order to acquire sufficient aerodynamic data to verify the hybrid model design capability to simulate the full-scale wing section. A series of ice-accretion tests were conducted over a range of total temperatures from -23.8 deg C to -1.4 deg C with all other conditions held constant. The results showed the changing ice-accretion morphology from rime ice at the colder temperatures to highly 3-D scallop ice in the range of -11.2 deg C to -6.3 deg C. Warmer temperatures generated highly 3-D ice accretion with glaze ice characteristics. The results indicated that the general scallop ice morphology was similar for all three models. Icing results were documented for limited parametric variations in angle of attack, drop size and cloud liquid-water content (LWC). The effect of velocity on ice accretion was documented for the Midspan and Outboard models for a limited number of test cases. The data suggest that there are morphological characteristics of glaze and scallop ice accretion on these swept-wing models that are dependent upon the velocity. This work has resulted in a large database of ice-accretion geometry on large-scale, swept-wing models.

Wind-Tunnel Tests↗
NASA NTRS2019

A New Class of Flares from Accreting Supermassive Black Holes

Accreting supermassive black holes (SMBHs) can exhibit variable emission across the electromagnetic spectrum and over a broad range of timescales. The variability of active galactic nuclei (AGNs) in the ultraviolet and optical is usually at the few tens of per cent level over timescales of hours to weeks1. Recently, rare, more dramatic changes to the emission from accreting SMBHs have been observed, including tidal disruption events2,3,4,5, ‘changing look’ AGNs6,7,8,9 and other extreme variability objects10,11. The physics behind the ‘re-ignition’, enhancement and ‘shut-down’ of accretion onto SMBHs is not entirely understood. Here we present a rapid increase in ultraviolet–optical emission in the centre of a nearby galaxy, marking the onset of sudden increased accretion onto a SMBH. The optical spectrum of this flare, dubbed AT 2017bgt, exhibits a mix of emission features. Some are typical of luminous, unobscured AGNs, but others are likely driven by Bowen fluorescence—robustly linked here with high-velocity gas in the vicinity of the accreting SMBH. The spectral features and increased ultraviolet flux show little evolution over a period of at least 14 months. This disfavours the tidal disruption of a star as their origin, and instead suggests a longer-term event of intensified accretion. Together with two other recently reported events with similar properties, we define a new class of SMBH-related flares. This has important implications for the classification of different types of enhanced accretion onto SMBHs.

Benny Trakhtenbrot↗
NASA NTRS2020

A strongly changing accretion morphology during the outburst decay of the neutron star x-ray binary 4U 1608-52

It is commonly assumed that the properties and geometry of the accretion flow in transient low-mass X-ray binaries (LMXBs) significantly change when the X-ray luminosity decays below ∼10−2 of the Eddington limit (LEdd). However, there are few observational cases where the evolution of the accretion flow is tracked in a single X-ray binary over a wide dynamic range. In this work, we use NuSTAR and NICER observations obtained during the 2018 accretion outburst of the neutron star LMXB 4U 1608−52, to study changes in the reflection spectrum. We find that the broad Fe–Kα line and Compton hump, clearly seen during the peak of the outburst when the X-ray luminosity is ∼1037 erg s−1 (∼0.05 LEdd), disappear during the decay of the outburst when the source luminosity drops to ∼4.5 × 1035 erg s−1 (∼0.002 LEdd). We show that this non-detection of the reflection features cannot be explained by the lower signal-to-noise ratio at lower flux, but is instead caused by physical changes in the accretion flow. Simulating synthetic NuSTAR observations on a grid of inner disc radius, disc ionization, and reflection fraction, we find that the disappearance of the reflection features can be explained by either increased disc ionization (log ξ  4.1) or a much decreased reflection fraction. A changing disc truncation alone, however, cannot account for the lack of reprocessed Fe–Kα emission. The required increase in ionization parameter could occur if the inner accretion flow evaporates from a thin disc into a geometrically thicker flow, such as the commonly assumed formation of a radiatively inefficient accretion flow at lower mass accretion rates.

J. van den Eijnden↗
DOE OSTI2022

Possibilities and Limitations of Kinematically Identifying Stars from Accreted Ultra-faint Dwarf Galaxies

Abstract The Milky Way has accreted many ultra-faint dwarf galaxies (UFDs), and stars from these galaxies can be found throughout our Galaxy today. Studying these stars provides insight into galaxy formation and early chemical enrichment, but identifying them is difficult. Clustering stellar dynamics in 4D phase space ( E , L z , J r , J z ) is one method of identifying accreted structure that is currently being utilized in the search for accreted UFDs. We produce 32 simulated stellar halos using particle tagging with the Caterpillar simulation suite and thoroughly test the abilities of different clustering algorithms to recover tidally disrupted UFD remnants. We perform over 10,000 clustering runs, testing seven clustering algorithms, roughly twenty hyperparameter choices per algorithm, and six different types of data sets each with up to 32 simulated samples. Of the seven algorithms, HDBSCAN most consistently balances UFD recovery rates and cluster realness rates. We find that, even in highly idealized cases, the vast majority of clusters found by clustering algorithms do not correspond to real accreted UFD remnants and we can generally only recover 6% of UFDs remnants at best. These results focus exclusively on groups of stars from UFDs, which have weak dynamic signatures compared to the background of other stars. The recoverable UFD remnants are those that accreted recently, z accretion ≲ 0.5. Based on these results, we make recommendations to help guide the search for dynamically linked clusters of UFD stars in observational data. We find that real clusters generally have higher median energy and J r , providing a way to help identify real versus fake clusters. We also recommend incorporating chemical tagging as a way to improve clustering results.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

The Evolution of Accreting Binaries: From Brown Dwarfs to Supermassive Black Holes

Circumbinary accretion occurs throughout the universe, from the formation of stars and planets to the aftermath of major galactic mergers. We present an extensive investigation of circumbinary accretion disks, studying circular binaries with mass ratios (q ≡ M 2 /M 1 ) from 0.01 to 1 and at each mass ratio probing the effects of disk thickness and viscosity. We study disks with aspect ratios H/r ϵ {0.1, 0.05, 0.03} and vary both the magnitude and spatial dependence of viscosity. Although thin accretion disks have previously been found to promote rapid inspirals of equal-mass binaries, we find that gravitational torques become weaker at lower mass ratios and most binaries with 0.01 ≤ q ≤ 0.04 outspiral, which may delay the coalescence of black hole binaries formed from minor mergers and cause high-mass exoplanets to migrate outward. However, in a number of cases, the disks accreting onto binaries with mass ratios ~0.07 fail to develop eccentric modes, leading to extremely rapid inspirals. Variability in black hole accretion correlates with disk eccentricity, and we observe variability above the ~10% level even for mass ratios of 0.01. We demonstrate that the spatial dependence of the viscosity (e.g., α vs. constant ν) significantly affects the degree of preferential accretion onto the secondary, resolving discrepancies between previous studies. Colder circumbinary disks remain eccentric even at q ~ 0.01 and sustain deep, asymmetric cavities.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2016

Parsec-Scale Accretion and Winds Irradiated by a Quasar

We present numerical simulations of properties of a parsec-scale torus exposed to illumination by the central black hole in an active galactic nucleus (AGN). Our physical model allows to investigate the balance between the formation of winds and accretion simultaneously. Radiation-driven winds are allowed by taking into account radiation pressure due to UV and IR radiation along with X-ray heating and dust sublimation. Accretion is allowed through angular momentum transport and the solution of the equations of radiative, viscous radiation hydrodynamics. Our methods adopt flux-limited diffusion radiation hydrodynamics for the dusty, infrared pressure driven part of the flow, along with X-ray heating and cooling. Angular momentum transport in the accreting part of the flow is modeled using effective viscosity. Our results demonstrate that radiation pressure on dust can play an important role in shaping AGN obscuration. For example, when the luminosity illuminating the torus exceeds L greater than 0.01 L(sub Edd), where L(sub Edd) is the Eddington luminosity, we find no episodes of sustained disk accretion because radiation pressure does not allow a disk to form. Despite the absence of the disk accretion, the flow of gas to smaller radii still proceeds at a rate 10(exp -4)-10(exp -1)M dot yr(exp -1) through the capturing of the gas from the hot evaporative flow, thus providing a mechanism to deliver gas from a radiation-pressure dominated torus to the inner accretion disk. As L L(sub edd) increases, larger radiation input leads to larger torus aspect ratios and increased obscuration of the central black hole. We also find the important role of the X-ray heated gas in shaping the obscuring torus.

accretion disks - galaxies: active - galaxies: Sey↗
DOE OSTI2023

Activity model for 36 elements in Fe-Ni-Si-S-C liquids with application to terrestrial planet accretion and mantle geochemistry: New data for Ru, Re, Pt, Os, Ti, Nb, and Ta

Understanding siderophile element partitioning between metal and silicate melts under diverse conditions can be used to place important constraints on the materials and conditions of planetary accretion and core formation, as well as post core formation processes. However, the effects of Si on the partitioning and activity coefficients for these elements are not well known, despite Si likely being one of the dominant light elements in Earth’s core. To address this gap in understanding, we have undertaken a systematic study of the highly siderophile elements Re, Pt, Os, and Ru, and the refractory lithophile elements Nb, Ta and Ti at 1600 °C and 1 GPa, to derive epsilon interaction parameters for these elements in FeSi metallic liquids. Positive epsilon interaction parameters were measured for Nb, Ta, Ti, Ru, Re, Pt, and Os, indicating that dissolved Si in Fe liquids causes a decrease in their metal/silicate partition coefficients (or ‘silicophobic’ behavior). Furthermore, ε$_{Re, Os, or Ru}^{Si}$ > ε$_{Re, Os, or Ru}^{S}$ which means Si causes a larger decrease in D(metal/silicate) than S, and the chalcophile behavior expected from some elements will be completely masked by the presence of Si in a metallic liquid. The new parameters are used to update an activity model that now includes 36 siderophile elements in Fe-Ni-Si-S-C liquids (27 trace elements considered here). Systematic assessment of these 27 elements shows which have the strongest affinity for Si, C, and S, and also how activity coefficients for these elements would vary during accretion and core formation in Earth, Mars, and Mercury of widely differing fO 2 and core compositional conditions. The activity model is combined with new partitioning expressions for Mo, W, Cr, Re Ru, Pt, and Os and applied to aspects of post core formation mantle geochemistry of Earth, Mars, and Mercury. Our updated expressions show that the BSE Mo/W ratio can easily be achieved with metal/silicate partitioning during growth of the Earth, whereas Re, Os and Ru become lower than and highly fractionated compared with BSE values during core formation and accretion, and thus nearly 99% of their BSE abundances are likely contributed by late accretion. Ru isotopes should be a very good indicator of the source material for the late accretion. The high Pt/Os and Re/Os developed in a deepening magma ocean during the growth of the Earth, indicates 186 Os and 187 Os isotopes could be coupled if this ancient material remained isolated and subsequently became entrained in mantle plumes and measured in surficial lavas. The extent to which this occurred will be limited by the low Os content of this ancient material, thus requiring mixing as a major component in plume sources. Martian mantle Hf/W ratio stays low during accretion and core formation modelling, suggesting that W isotope anomalies are more likely due to solid/liquid silicate fractionation than to core formation. Finally, Ti contents measured by MESSENGER at Mercury’s surface can be explained by segregation of either a metallic core (IW-6 to -8) or metallic core + sulfide (IW-4 to -7.5) followed by mantle melting.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗