Search NASA⌕ Search

SEARCH · Search NASA

Results for “Adducts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

1,8-Dihydroxy Naphthalene—A New Building Block for the Self-Assembly with Boronic Acids and 4,4′-Bipyridine to Stable Host–Guest Complexes with Aromatic Hydrocarbons

The new Lewis acid–base adducts of general formula X(nad)B←NC5H4-C5H4N→B(nad)X [nad = 1,8-O2C10H6, X = C6H5 (2c), 3,4,5-F3-C6H2 (2d)] were synthesized in high yields via reactions of 1,8-dihydroxy naphthalene [nadH2] and 4,4′-bipyridine with the aryl boronic acids C6H5B(OH)2 and 3,4,5-F3-C6H2B(OH)2, respectively, and structurally characterized by multi-nuclear NMR spectroscopy and SCXRD. Self-assembled H-shaped Lewis acid–base adduct 2d proved to be effective in forming thermally stable host–guest complexes, 2d × solvent, with aromatic hydrocarbon solvents such as benzene, toluene, mesitylene, aniline, and m-, p-, and o-xylene. Crystallographic analysis of these solvent adducts revealed host–guest interactions to primarily occur via π···π contacts between the 4,4′-bipyridyl linker and the aromatic solvents, resulting in the formation of 1:1 and 1:2 host–guest complexes. Thermogravimetric analysis of the isolated complexes 2d × solvent revealed their high thermal stability with peak temperatures associated with the loss of solvent ranging from 122 to 147 °C. 2d, when self-assembled in an equimolar mixture of m-, p-, and o-xylene (1:1:1), preferentially binds to o-xylene. Collectively, these results demonstrate the ability of 1,8-dihydroxy naphthalene to serve as an effective building block in the selective self-assembly to supramolecular aggregates through dative covalent N→B bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Evaluation of Aliphatic Alcohols for CO 2 Capture Using the Characteristic Carbonate Frequency

Control over CO 2 capture and utilization are important scientific and technological challenges. Although a variety of amine absorbents are used for capture, releasing the captured CO 2 is often difficult and limits their recyclability. Therefore, it is crucial to control the strength of the CO 2 bond with the absorbent. Furthermore, it is desirable to use a method that can conveniently report the strength of this bond. This motivates exploring adducts of CO 2 with alcohols in the presence of a base, using vibrational spectroscopy to report on the bond strength. Although reactions of alcohols with CO 2 to form alkyl carbonates are known, a systematic study of these adducts has not been conducted. Here we show formation of alkyl carbonates by a series of alcohols spanning the pK a range 9.5 to 16.8. We show experimental and computational results for the frequency of the characteristic asymmetric stretch of the carbonate and demonstrate that it correlates inversely with the pK a of the alcohol. Based on computations of the bond lengths and previous work, we propose that this frequency also correlates inversely with the adduct strength. As a result, this work extends the scope of CO 2 capture reagents and inspires further research in tuning alcohols as reversible absorbents.

Alcohols↗
DOE OSTI2020

The nitrosoamphetamine metabolite is accommodated in the active site of human hemoglobin: Spectroscopy and crystal structure

Amphetamine-based (Amph) drugs are metabolized in humans to their hydroxylamine (AmphNHOH) and nitroso (AmphNO) derivatives. The latter metabolites are known to bind to the Fe centers of cytochrome P450 and other heme enzymes to inhibit their activities. Although these AmphNHOH/AmphNO metabolites are present in vivo, their interactions with the blood protein hemoglobin (Hb) and the muscle protein (Mb) have been largely discounted due to a perception that the relatively small heme active sites of Hb and Mb will not be able to accommodate the large AmphNO group. Here, we report the 2.15 Å resolution X-ray crystal structure of the AmphNO adduct of adult human hemoglobin as the Hb [ α -Fe III (H 2 O)][ β -Fe II (AmphNO)] derivative. We show that the binding of AmphNO to the β subunit is enabled by an E helix movement and stabilization of ligand binding by H-bonding with the distal His63 residue. We also observe an AmphNHOH group in the Xe2 pocket in close proximity to the α heme site in this derivative. Additionally, UV–vis spectroscopy was used to characterize this and related wt and mutant Mb adducts. Importantly, our X-ray crystal structure of this Hb-nitrosoamphetamine complex represents the first crystal structure of a wild-type heme protein adduct of any amphetamine metabolite. Our results provide a framework for further studies of AmphNHOH/AmphNO interactions with Hb and Mb as viable processes that potentially contribute to the overall biological inorganic chemistry of amphetamine drugs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effects of Molecular Size on Resolution in Charge Detection Mass Spectrometry

Instrumental resolution of Fourier transform-charge detection mass spectrometry instruments with electrostatic ion trap detection of individual ions depends on the precision with which ion energy is determined. Energy can be selected using ion optic filters or from harmonic amplitude ratios (HARs) that provide Fellgett’s advantage and eliminate the necessity of ion transmission loss to improve resolution. Unlike the ion energy-filtering method, the resolution of the HAR method increases with charge (improved S/N) and thus with mass. An analysis of the HAR method with current instrumentation indicates that higher resolution can be obtained with the HAR method than the best resolution demonstrated for instruments with energy-selective optics for ions in the low MDa range and above. However, this gain is typically unrealized because the resolution obtainable with molecular systems in this mass range is limited by sample heterogeneity. Here, this phenomenon is illustrated with both tobacco mosaic virus (0.6–2.7 MDa) and AAV9 (3.7–4.7 MDa) samples where mass spectral resolution is limited by the sample, including salt adducts, and not by instrument resolution. Nevertheless, the ratio of full to empty AAV9 capsids and the included genome mass can be accurately obtained in a few minutes from 1× PBS buffer solution and an elution buffer containing 300+ mM nonvolatile content despite extensive adduction and lower resolution. Empty and full capsids adduct similarly indicating that salts encrust the complexes during late stages of droplet evaporation and that mass shifts can be calibrated in order to obtain accurate analyte masses even from highly salty solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Ligand Influence on Indium–Sulfide Cluster Formation and Reactivity

An indium–sulfide tetramer ([InMe 2 (SSiMe 3 )] 4 ), which contains reactive silyl and methyl groups, is shown to be an isolable intermediate in cluster synthesis. The reactive groups allow it to act as a synthon in the formation of multinuclear indium–sulfide architectures, evidenced by the crystallization of a coordination polymer ([In 20 S 14 Me 32 (4,4’-bpy) 5 ·5CH 2 Cl 2 ] n ) utilizing In 10 S 7 clusters as nodes. The reaction between trimethylindium (InMe 3 ) and bis­(trimethylsilyl)­sulfide (S­(SiMe 3 ) 2 ) is explored with and without the presence of a ligating bipyridine. In both cases, a sulfide-indium adduct is formed, which slowly converts into a multimetallic complex. Here, the ligand 2,2’-bipyridine (2,2’-bpy) is coordinated to InMe 3 to form the adduct InMe 3 (bpy), which upon addition of sulfide, eliminates tetramethylsilane (TMS) and binds two additional InMe 3 moieties (InMe 2 (bpy)­(μ 3 -SSiMe 3 )­(InMe 3 ) 2 ). When reacted neatly without bipyridine, InMe 3 and S­(SiMe 3 ) 2 form the adduct InMe 3 (S­(SiMe 3 ) 2 ), which subsequently eliminates TMS and intermolecularly associates to yield [InMe 2 (SSiMe 3 )] 4 . Although stable in an inert atmosphere, [InMe 2 (SSiMe 3 )] 4 undergoes facile hydrolysis to yield [InMeS] n when exposed to air. The effect of ligand addition (4,4’-bipyridine (4,4’-bpy)) to [InMe 2 (SSiMe 3 )] 4 is then examined. In every case, it is shown that the presence of the bpy ligand has a profound influence on the resulting structure, as shown by the unexpected formation of a trimer and In 10 S 7 cluster network.

Bell, Colby Seth [Argonne National Laboratory (ANL↗
DOE OSTI2025

CO Reduction to Ethylene and Cyclopropane via a Trappable Ruthenium Methylidene

Ruthenium complexes based on cis-[Ru(bpy) 2 (CO) 2 ] 2+ (bpy is 2,2′-bipyridine) can reduce CO 2 and CO to C 1 products including methanol, but access to products containing C–C bonds has been elusive. A reaction pathway to convert CO into multicarbon products ethylene and cyclopropane is presented here, along with mechanistic studies elucidating the key intermediates in C–C bond formation. The ruthenium hydroxymethyl complex [Ru(bpy′) 2 (CO)(CH 2 OH)] + (bpy′ = 5,5′-dimethyl-2,2′-bipyridine) undergoes protonolysis to generate the ethylene complex [Ru(bpy′) 2 (CO)(C 2 H 4 )] 2+ even at −80 °C, with free ethylene released upon warming to room temperature. Experimental evidence implicates a highly electrophilic methylidene complex [Ru(bpy′) 2 (CO)(CH 2 )] 2+ as the key intermediate. The methylidene was successfully trapped with nitriles and pyridine, forming adducts (ylide complexes) that each have a unique reactivity profile. With an appropriate nitrile, the adduct can be characterized at low temperature before warming generates ethylene. A more stable pyridine adduct [Ru(bpy′) 2 (CO)(CH 2 pyridine)] 2+ was crystallographically characterized. Even ethylene itself is sufficiently nucleophilic to react with the electrophilic methylidene, revealing a route from CO to the C 3 hydrocarbon cyclopropane. Furthermore, the methods for controlling the reactivity of hydroxymethyl and methylidene complexes toward C–C bond formation can inform the development of CO and CO 2 reduction catalysts.

Carbene Compounds↗
DOE OSTI2020

An Experimental and Theoretical Study of the High Temperature Reactions of the Four Butyl Radical Isomers

The high temperature gas phase chemistry of the four butyl radical isomers (n-butyl,sec-butyl, iso-butyl, andtert-butyl) was investigated in a combined experimental and theoretical study. Organic nitrites were used as convenient and clean sources of each of the butyl radical isomers. Rate coefficients for dissociation of each nitrite were obtained experimentally and are at, or close to, the high pressure limit. Low pressure experiments were performed in a diaphragmless shock tube with laser schlieren densitometry at post-shock pressures of 65, 130, and 260 Torr and post-shock temperatures of 700-1000 K. Additional experiments were conducted with iso-butyl radicals at 805 K and 8.7 bar to elucidate changes in mechanism at higher pressures. These experiments were performed in a miniature shock tube with synchrotron-based photoionization mass spectrometry. The mass spectra confirmed that scission of the O-NO bond is the primary channel by which the precursors dissociate, but they also provided evidence of a minor channel (<7.7%) through HNO loss and formation of an aldehyde. These high pressure experiments were also used to determine the disproportionation/recombination ratio for iso-butyl radicals as 0.3. Reanalysis of the lower-temperature literature and the present data yielded rate constants for the disproportionation reaction, iso-butyl + iso-butyl = iso-butene + iso-butane. A chemical kinetics model was developed for the reactions of the butyl isomers that included new paths for highly energized adducts. These adducts are formed by the addition of H, CH 3 or C 2 H 5 to the butyl radicals. Accompanying theoretical investigations show that chemically activated pathways are competitive with stabilization of the adduct by collision under the conditions of the laser schlieren experiments. These calculations also show that at 10 bar and T< 1000 K stabilization is the only important reaction, but at higher temperatures, even at 10 bar, chemically activated product channels should also be considered. Branching fractions and rate coefficients are presented for these reactions. Furthermore, this study also highlights the importance of the radical structure for determining branching ratios for disproportionation and recombination of alkyl radicals, and these were facilitated by theoretical calculations of recombination rate coefficients for the four butyl radical isomers. Overall, the results reveal previously unknown features of butyl radical chemistry under conditions that are relevant to a wide range of applications and reaction mechanisms are presented that incorporate pressure dependent rate coefficients for the key steps.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Controlling the toxicity of biomass-derived difunctional molecules as potential pharmaceutical ingredients for specific activity toward microorganisms and mammalian cells

A biomass-derived difuran compound, denoted as HAH (HMF–acetone–HMF), synthesized by aldol-condensation of 5-hydroxyfurfural (HMF) and acetone, can be partially hydrogenated to provide an electron-rich difuran compound (PHAH) for Diels–Alder reactions with maleimide derivatives. The nitrogen (N) site in the maleimide can be substituted by imidation with amine-containing compounds to control the hydrophobicity of the maleimide moiety in adducts of furans and maleimide by Diels–Alder reaction, denoted as norcantharimides (Diels–Alder adducts). The structural effects on the toxicity of various biomass-derived small molecules synthesized in this manner to regulate biological processes, defined as low molecular weight (≤1000 g mol -1 ) organic compounds, were investigated against diverse microbial and mammalian cell types. The biological toxicity increased when hydrophobic N-substitutions and C[double bond, length as m-dash]C bonds were introduced into the molecular structure. Among the synthesized norcantharamide derivatives, some compounds demonstrated pH-dependent toxicities against specific cell types. Reaction kinetics analyses of the norcantharimides in biological conditions suggest that this pH-dependent toxicity of norcantharimides could arise from retro Diels–Alder reactions in the presence of a Brønsted acid that catalyzes the release of an N-substituted maleimide, which has higher toxicity against fungal cells than the toxicity of the Diels–Alder adduct. These synthetic approaches can be used to design biologically-active small molecules that exhibit selective toxicity against various cell types (e.g., fungal, cancer cells) and provide a sustainable platform for production of prodrugs that could actively or passively affect the viability of infectious cells.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

Chemical ionization mass spectrometry utilizing benzene cations for measurements of volatile organic compounds and nitric oxide

We evaluate the capability of chemical ionization mass spectrometry (CIMS) using benzene cations as reagent ions (benzene CIMS) for detecting atmospheric trace gases. We characterize the ionization pathways and product ion distributions for 27 analytes spanning diverse chemical classes. To interpret the complex ion chemistry involving two reagent ions (C 6 H$^{+}_{6}$ and (C 6 H 6 )$^{+}_{2}$) and multiple ionization pathways (charge transfer, proton transfer, adduct formation, and hydride abstraction), we introduce a thermodynamics-based framework that classifies analytes into three categories based on their ionization energy (IE), relative to those of benzene monomer (9.24 eV) and dimer (8.69 eV). Each class exhibits distinct ionization mechanisms and product ions. Analytes with IE smaller than 8.69 eV (low IE) undergo charge transfer with both reagent ions; analytes with IE between 8.69 and 9.24 eV (mid IE) undergo charge transfer with C 6 H$^{+}_{6}$ and potential adduct formation with (C 6 H 6 )$^{+}_{2}$; analytes with IE larger than 9.24 eV (high IE) could undergo adduct formation, proton transfer, or hydride abstraction. Analytes within each class also show similar sensitivity, enabling sensitivity estimation for compounds lacking calibration standards. In addition to volatile organic compounds (VOCs), benzene CIMS detects nitric oxide (NO) with a detection limit of 5 pptv for 1 min integration time, exceeding the performance of most commercial NOx analyzers. Field deployments in Chicago and St. Louis demonstrate good agreement with reference NO measurements. Isoprene measurements show good agreement with a co-located gas chromatography–photoionization detector (GC-PID) in St. Louis, but exhibit substantial positive bias in Chicago, likely due to interferences from anthropogenic VOCs in the polluted urban environment. These results highlight the potential of benzene CIMS for concurrent measurements of NO, VOCs, and their oxidation products using a single instrument, while also underscoring challenges in complex atmospheric conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Experimental Assessment of Mammalian Lipidome Complexity Using Multimodal 21 T FTICR Mass Spectrometry Imaging

Herein, we assess the complementarity and complexity of data that can be detected within mammalian lipidome mass spectrometry imaging (MSI) via matrix-assisted laser desorption ionization (MALDI) and nanospray desorption electrospray ionization (nano-DESI). We do so by employing 21 T Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) with absorption mode FT processing in both cases, allowing unmatched mass resolving power per unit time (≥613k at m/z 760, 1.536 s transients). While our results demonstrated that molecular coverage and dynamic range capabilities were greater in MALDI analysis, nano-DESI provided superior mass error, and all annotations for both modes had sub-ppm error. Taken together, these experiments highlight the coverage of 1676 lipids and serve as a functional guide for expected lipidome complexity within nano-DESI-MSI and MALDI-MSI. To further assess the lipidome complexity, mass splits (i.e., the difference in mass between neighboring peaks) within single pixels were collated across all pixels from each respective MSI experiment. The spatial localization of these mass splits was powerful in informing whether the observed mass splits were biological or artificial (e.g., matrix related). Mass splits down to 2.4 mDa were observed (i.e., sodium adduct ambiguity) in each experiment, and both modalities highlighted comparable degrees of lipidome complexity. Further, we highlight the persistence of certain mass splits (e.g., 8.9 mDa; double bond ambiguity) independent of ionization biases. Here, we also evaluate the need for ultrahigh mass resolving power for mass splits ≤4.6 mDa (potassium adduct ambiguity) at m/z > 1000, which may only be resolved by advanced FTICR-MS instrumentation.

21T-FTICR-MS↗
DOE OSTI2021

Discovery of TAK-981, a First-in-Class Inhibitor of SUMO-Activating Enzyme for the Treatment of Cancer

SUMOylation is a reversible post-translational modification that regulates protein function through covalent attachment of small ubiquitin-like modifier (SUMO) proteins. The process of SUMOylating proteins involves an enzymatic cascade, the first step of which entails the activation of a SUMO protein through an ATP-dependent process catalyzed by SUMO-activating enzyme (SAE). Here, we describe the identification of TAK-981, a mechanism-based inhibitor of SAE which forms a SUMO–TAK-981 adduct as the inhibitory species within the enzyme catalytic site. Optimization of selectivity against related enzymes as well as enhancement of mean residence time of the adduct were critical to the identification of compounds with potent cellular pathway inhibition and ultimately a prolonged pharmacodynamic effect and efficacy in preclinical tumor models, culminating in the identification of the clinical molecule TAK-981.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Synthesis of [60]- and [70]Fullerene-Fused Tetrahydroquinoxaline Derivatives by Oxidative [4 + 2] Cycloaddition with Unusual Reactivity and Regioselectivity

The oxidative [4 + 2] reaction of o-phenylenediamine-derived disulfonamides with fullerene C 60 and C 70 is reported, in which electron-deficient reactants showed high reactivity. The reaction of C 70 exhibited unusual regioselectivity, yielding a [5,6]-adduct as the major product, which was characterized by 1 H, 13 C NMR and single-crystal X-ray diffraction. Here, DFT calculations revealed the reaction is an inverse-electron-demand Diels–Alder (IEDDA) reaction, and the [5,6]-adduct of C 70 is a kinetic product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Using Preformed Meisenheimer Complexes as Dopants for n-Type Organic Thermoelectrics with High Seebeck Coefficients and Power Factors

A pre-formed Meisenheimer complex of a naphthalenediimide (NDI) with tetrabutylammonium fluoride (TBAF) is obtained in a simple way by mixing dibrominated 4,9-dibromo-2,7-bis(2-octyldodecyl)benzo[lmn][3,8]phenanthroline-1,3,6,8(2H,7H)-tetraone and TBAF in solution and used as a dopant for n-type organic thermoelectrics. Additionally, two n-type polymers PNDIClTVT and PBDOPVTT are synthesized, n-doped, and characterized as conductive and thermoelectric materials. PNDIClTVT doped with NDI-TBAF presents a high σ value of 0.20 S cm –1 , a Seebeck coefficient (S) of -1854 µV K –1 , and a power factor (PF) of 67 µW m –1 K –2 , among the highest reported PF in solution-processed conjugated n-type polymer thermoelectrics. Using 4-(1,3-dimethyl-2,3-dihydro-1H-benzoimidazol-2-yl)phenyl)dimethylamine and NDI-TBAF as co-dopants, PNDIClTVT has a PF > 35 µW m –1 K –2 ; while for PBDOPVTT σ = 0.75 S cm –1 and PF = 58 µW m –1 K –2 . In this study it is found that an ionic adduct together with a neutral dopant improves the performance of n-type organic thermoelectrics leading to an enhanced power factor, and more generally, the role of such an adduct in polymer doping is also elucidated.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Efficient Electrochemical Reduction of CO 2 to Formate in Methanol Solutions by Mn‐Functionalized Electrodes in the Presence of Amines**

Carbon cloth electrode modified by covalently attaching a manganese organometallic catalyst is used as cathode for the electrochemical reduction of CO 2 in methanol solutions. Six different industrial amines are employed as co-catalyst in millimolar concentrations to deliver a series of new reactive system. While such absorbents were so far believed to provide a CO 2 reservoir and act as sacrificial proton source, we herein demonstrate that this role can be played by methanol, and that the adduct formed between CO 2 and the amine can act as an effector or inhibitor toward the catalyst, thereby enhancing or reducing the production of formate. Pentamethyldiethylentriamine (PMDETA), identified as the best effector in our series, converts CO 2 in wet methanolic solution into bisammonium bicarbonate. Computational studies revealed that this adduct is responsible for a barrierless transformation of CO 2 to formate by the reduced form of the Mn catalyst covalently bonded to the electrode surface. As a consequence, selectivity can be switched on demand from CO to formate anion, and in the case of (PMDETA) an impressive TON HCOO- of 2.8×10 4 can be reached. This new valuable knowledge on an integrated capture and utilization system paves the way toward more efficient transformation of CO 2 into liquid fuel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Acetylcholinesterase: Structure, dynamics, and interactions with organophosphorus compounds

Acetylcholinesterase (AChE) is an enzyme that hydrolyzes the neurotransmitter acetylcholine (ACh), removing it from the synaptic cleft after the transmission of an electrical signal, making it an essential component of chemical neurotransmission. AChE is a serine hydrolase, containing a catalytic triad of Ser/His/Glu. AChE is a prime target for pharmaceuticals treating a variety of neurological disorders. It is also the target of synthetic organophosphorus (OP) compounds that have been used as pesticides and chemical warfare agents. OP compounds contain a potent leaving group, such as fluorine, and act by forming a covalent adduct with the catalytic serine of the AChE active site. A wealth of structural information is available for AChE, including over 300 structures, including a subset of structures in complex with drugs as well as OP compounds. This review will highlight the interactions between OP compounds and AChE from a structural and computational perspective, with a discussion of access to the active site, as well as side reactions that lead to dealkylation of the OP-catalytic serine adduct, a process known as aging. We conclude that while the majority of the conformational changes needed to accommodate the OP compounds are localized to the acyl loop in the crystal structures, molecular dynamics simulations highlight the potential for a far more dynamic enzyme.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Identification of a key water molecule involved in the macrophage migration inhibitory factor‐catalyzed tautomerization of para ‐hydroxyphenylpyruvate using neutron crystallography

Abstract Neutron crystallography was used to determine a 2.5‐Å resolution all‐atom structure of macrophage migration inhibitory factor (MIF) interacting with 3‐(4‐hydroxyphenyl)‐pyruvate (HPP). MIF is a pro‐inflammatory, pro‐tumorigenic protein that may be an attractive therapeutic target. MIF catalyzes the interconversion of the keto and enol forms of HPP by a tautomerase reaction. Although HPP is evidently not a physiological substrate of MIF, many compounds that inhibit this activity in enzymatic assays have been found also to inhibit physiological activities of MIF. Therefore, the MIF‐catalyzed HPP tautomerization reaction is used in initial screening of compounds in the search for inhibitors of MIF physiological activity. The neutron diffraction‐derived crystal structure reveals the position of a water molecule involved in the tautomerization reaction, and also confirms the charged state of lysine‐32 in the active site. The structure confirms the previously proposed catalytic mechanism of MIF, with the N‐terminal Pro‐1 abstracting a proton to generate an HPP enolate intermediate which is subsequently protonated. The structure reported herein reveals that this proton is supplied by a neighboring water molecule. Along with the neutron structure, a room‐temperature synchrotron x‐ray crystal structure reveals a covalent adduct between HPP and MIF. While this adduct is a result of radiation‐induced chemistry, its formation confirms the catalytic role of the active site residue because a covalent complex could only form if the reactive carbon of the substrate is correctly positioned by the enzyme.

Schröder, Gabriela C. [Department of Molecular and↗
DOE OSTI2023

Structure-guided design of direct-acting antivirals that exploit the gem-dimethyl effect and potently inhibit 3CL proteases of severe acute respiratory syndrome Coronavirus-2 (SARS-CoV-2) and middle east respiratory syndrome coronavirus (MERS-CoV)

The high morbidity and mortality associated with SARS-CoV-2 infection, the etiological agent of COVID-19, has had a major impact on global public health. Significant progress has been made in the development of an array of vaccines and biologics, however, the emergence of SARS-CoV-2 variants and breakthrough infections are an ongoing major concern. Furthermore, there is an existing paucity of small-molecule host and virus-directed therapeutics and prophylactics that can be used to counter the spread of SARS-CoV-2, and any emerging and re-emerging coronaviruses. Here, we describe herein our efforts to address this urgent need by focusing on the structure-guided design of potent broad-spectrum inhibitors of SARS-CoV-2 3C-like protease (3CL pro or Main protease), an enzyme essential for viral replication. The inhibitors exploit the directional effects associated with the presence of a gem-dimethyl group that allow the inhibitors to optimally interact with the S4 subsite of the enzyme. Several compounds were found to potently inhibit SARS-CoV-2 and MERS-CoV 3CL proteases in biochemical and cell-based assays. Specifically, the EC50 values of aldehyde 1c and its corresponding bisulfite adduct 1d against SARS-CoV-2 were found to be 12 and 10 nM, respectively, and their CC50 values were >50 μM. Furthermore, deuteration of these compounds yielded compounds 2c/2d with EC50 values 11 and 12 nM, respectively. Replacement of the aldehyde warhead with a nitrile (CN) or an α-ketoamide warhead or its corresponding bisulfite adduct yielded compounds 1g, 1e and 1f with EC50 values 60, 50 and 70 nM, respectively. High-resolution cocrystal structures have identified the structural determinants associated with the binding of the inhibitors to the active site of the enzyme and, furthermore, have illuminated the mechanism of action of the inhibitors. Overall, the high Safety Index (SI) (SI=CC50/EC50) displayed by these compounds suggests that they are well-suited to conducting further preclinical studies.

3-Chymotrypsin-like protease (3CLpro)↗
DOE OSTI2020

The mechanism of carboxylative cyclization of propargylamine by N-heterocyclic carbene complexes of Au(I)

Here, the complex [Au(IPr)(2-oxazolidinone)] (1 = IKa) was prepared from reaction of [Au(IPr)Cl] (2), K 2 CO 3 , and propargyl amine (PPA). Kinetic studies have been performed for acid cleavage of 1 to yield the oxazolidinone product and an [Au(IPr)(X)] adduct. The fastest rates of cleavage were found to occur for the hydrogen chloride salt of PPA (PPA-HCl) and for the CO 2 adduct of PPA, PPA-CO 2 = the carbamic acid (CA). This transformation was studied as a function of [CA], pressure of CO 2 as well as temperature. Detailed computational studies support the formation of a key intermediate and are also in agreement with a rapid carbonylation/decarbonylation reaction. The computed reactions mechanisms for addition of PPA-HCl and CA are also presented as well as the crystal structure of 1.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗