The effect of lanthanoid defects on anionic solvation of Li in Li6.5La2+xZr1.5Ta0.5O12 from x = 0 to x = 1.2 garnet
Not Available
Valle, Joseph M.↗
SEARCH · Search NASA
Results for “Anion Effect”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Atomistic Insights into Lithium–Glyme Solvate Ionic Liquids: Effects of Chain Length and Anion Coordination
For this study, mixtures of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) in diglyme (G2), triglyme (G3) and tetraglyme (G4) at solvate ionic liquid (SIL) concentrations were investigated using classical molecular dynamics (cMD) simulations with a physically motivated force-field specifically developed for modeling these systems. The structural and dynamical properties of the mixtures were computed and analyzed. Lithium solvation shells, radial distribution functions, and X-ray structure factors were studied across the different SIL systems. Translational diffusion and rotational relaxation times were also evaluated, exhibiting similar trends with increasing glyme chain length. The results are consistent with experimental data and in good agreement with previous computational studies on G3 and G4. These findings validate the accuracy of the force field in modeling glyme systems and its use for describing the [Li(G2) 4/3 ][TFSI] mixture. Additionally, the thermal and electrochemical stability of these electrolytes were systematically examined. The thermal stability appears to be governed by cooperative interactions among glyme molecules, while the electrochemical stability is primarily influenced by Li + -anion interactions, which vary significantly with glyme chain length. Overall, the study sheds light on the crucial role of the anion in these glyme-based SILs and offers valuable insights into Li + -glyme systems at SIL concentrations, highlighting their promise as potential Li-ion battery electrolytes.
anions↗
Manganese Molybdate Cathodes with Dual-Redox Centers for Aqueous Zinc-Ion Batteries: Impact of Electrolyte on Electrochemistry
Not Available
36 MATERIALS SCIENCE↗
Chlorocobaltate-Enabled Selective Separation of CoCl 2 from Mixed Chloride and Nitrate Salts of Mn, Co, and Ni
Described here is the effect of anionic metalates─chlorocobaltate and nitratocobaltate─on the heat-driven separation of the critical element cobalt from potentially competing transition metal salts. Resins bearing the hexadentate glycolamide receptor L (PS-L) exhibit sorption capacities, Q = 1.33 mmol/g for CoCl 2 and Q = 0.66 mmol/g for Co(NO 3 ) 2 , as inferred from sorption isotherm studies. This trend runs counter to the typical Hofmeister series for anion selectivity. Ion chromatographic analysis of a mixed CoCl 2 /Co(NO 3 ) 2 solution revealed an increase in chloride content from 55 mol % to 90 mol % after a single thermally driven catch-and-release cycle. This chloride-selective behavior was recapitulated in a mixed-metal cation, mixed-anion system containing the chloride and nitrate salts of Mn(II), Co(II), and Ni(II) at near-equimolar concentrations. PS-L also displayed enhanced selectivity for Co using this mixed stock solution as observed by ICP-OES. In contrast, for a nitrate-only solution containing Mn(II), Co(II), and Ni(II), PS-L showed increased affinity for Mn, with its proportion rising from 36.6 mol % to 58.1% after a single catch-and-release cycle. Density functional theory calculations support the suggestion that the enhanced uptake of Co(II) in chloride-rich media arises from the high thermodynamic stability of [CoCl 4 ] 2– , which facilitates its outer-sphere coordination to cationic resin-bound cobalt species. Single crystal X-ray crystallographic analyzes of L•MCl 2 (M = Mn, Co, Ni) and L•M(NO 3 ) 2 (M = Mn, Co) confirmed metal complexation by L in the solid state and the concomitant formation of metalate counteranions. Here, the present study highlights a relatively simple approach for separating cobalt from its transition metal congeners.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Electrochemical reactivity and passivation of organic electrolytes at spinel MgCrMnO 4 cathode interfaces for rechargeable high voltage magnesium-ion batteries
Magnesium transition metal oxides such as MgCr 2−x Mn x O 4 are promising high-voltage and high-capacity cathode materials for rechargeable magnesium batteries (RMBs). Understanding and improving the chemical and electrochemical stability of the cathode–electrolyte interface (CEI) has been the primary technical emphasis to enable this category of cathode materials, which has been significantly underexplored. Herein, in this study, we focus on investigating the fundamental mechanism of parasitic reactions at the charged surface of the high-voltage MgCrMnO 4 model cathode with different organic electrolytes. The aim is to reveal the underlying effect of anions and solvents responsible for the passivation behavior of the cathode by using three exemplary anions: [(CF 3 SO 2 ) 2 N] − (TFSI − ), Al[OC(CF 3 ) 3 ] 4 − (TPFA − ), and [CB 11 H 12 ] − (MC) and three solvents: diglyme (G2), triglyme (G3), and 3-methoxypropylamine (MPA). High precision leakage current measurements during potentiostatic hold reveal that the electrolyte solvent chemistry has a more profound impact than anion's on the passivation of the MgCrMnO 4 cathode surface during deintercalation of Mg 2+ . X-ray photoelectron spectroscopy exhibits the differences in CEI composition. Amine solvents like MPA show poor passivation due to a higher degree of solvent decomposition, while the thin and anion-derived CEI in glyme-based electrolytes is directly linked with the better passivation behavior on the cathode. Furthermore, we leverage the knowledge from these findings to modify the electrolyte structure by adding a solvent additive, with the goal of reducing the parasitic reaction.
25 ENERGY STORAGE↗
The role of Co valence in charge transport in the entropy‐stabilized oxide (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O
Abstract Many of the studies on the entropy‐stabilized oxide (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O have been heavily application‐based. Previous works have studied effects of cation stoichiometry on the entropy‐driven reaction to form a single phase, but a fundamental exploration of the effects of anion stoichiometry and/or redox chemistry on electrical properties is lacking. Using near‐edge X‐ray absorption fine structure (NEXAFS) and electrical measurements, we show that oxidizing thin film samples of (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O affects primarily the valence of Co, leaving the other cations in this high‐entropy system unchanged. This oxidation increases electrical conduction in these thin films, which occurs via small polaron hopping mediated by the Co valence shift from 2+ to a mixed 2+/3+ state. In parallel, we show that bulk samples sintered in an oxygen‐rich atmosphere have a lower activation energy for electrical conduction than those equilibrated in a nitrogen (reducing) atmosphere. Combining feasible defect compensation scenarios with electrical impedance measurements and NEXAFS data, we propose a self‐consistent interpretation of Co redox‐mediated small polaron conduction as the dominant method of charge transfer in this system.
36 MATERIALS SCIENCE↗
Biosynthesis of Zinc Oxide Nanoparticles using Fungal Filtrates
Fungi produce and excrete various proteins, enzymes, and polysaccharides, which may be used for the synthesis of nanoparticles. This study investigated the effect an anion species on the synthesis of ceramic nanoparticles using fungal filtrates. In this work, ceramic zinc oxide (ZnO) nanoparticles ranging between 1 nm and 1000 nm were successfully synthesized using three different filamentous fungi: Aspergillus sp., Penicillium sp., and Paecilomyces variotti. Each fungus was cultured, and the filtrate was extracted and individually exposed to zinc nitrate, zinc sulfate, or zinc chloride. The formation of nanoparticles was characterized using UV-visible spectrophotometry (UV-Vis), fluorescence microscopy, and with transmission electron microscopy (TEM) analyses. UV-Vis spectra exhibited broad increases in the absorption across the range of 200 nm - 800 nm, which corresponded to the formation of ZnO nanoparticles under various conditions. Nanoparticle formation was confirmed with fluorescence microscopy and TEM analysis and determined to form particles with an irregular spherical shape. To date, our work demonstrates that the ability of fungi to synthesize ZnO nanoparticles is not genus/species-specific but is dependent on the starting composition of a given metal salt.
59 BASIC BIOLOGICAL SCIENCES↗
Understanding the effects of backbone chemistry and anion type on the structure and thermal behaviors of imidazolium polyimide‐ionenes
Explore the source record for details and available documents.
Kathryn E O'Harra↗
Role of anions in mechanical failure Annual report
Evaluation of anion impurities effects on mechanical failure of polycrystalline ceramic materials
Kapadia, C. M.↗
Effect of KOH concentration and anions on the performance of Ni-H2 battery positive plate
The capacity and voltage behavior of electrochemically impregnated sintered nickel positive plates was examined by galavanostatic charging; and discharging in a flooded electrolyte cell. Three different concentrations of KOH (40 percent, 31 percent, and 26 percent) and 31 percent KOH containing dissolved nitrate, sulfate or silicate were investigated. The end of charge voltage at C/10 charge and at 10 C showed the following order: 40 percent KOH is greater than 31 percent KOH alone and in the presence of the anions greater than 26 percent KOE. The middischarge voltage at C/2 discharge was higher in 26 percent KOH, almost the same for 31 percent KOH with and without the added contaminants and much lower for 40 percent KOH. The plate capacity was marginally affected by cycling in all cases except for 40 percent KOH where the capacity declined after 1000 cycles at 80 percent DOD. At the end of cycling the plate tested in the presence of sulfate and silicate experienced measurable weight loss as a result of active material extrusion. Cyclic voltammetry of miniature electrodes in 31 percent KOH showed that the second oxidation peak that corresponds to the formation of a different phase of oxidized Ni has a lower peak current at -5 C compared to 25 C and oxygen evolution occurs a higher potential at -5 C. The reduction peak (discharge reaction) is more polarized at 25 C compared to -5 C. The presence of silicate alters the potentials only marginally. The implications of these results in plate treatment and low temperature operation are discussed.
Vaidyanathan, H.↗
Effect of KOH Concentration and Anions on the Performance of a Ni-H2 Battery Positive Plate
The capacity and voltage behavior of electrochemically impregnated sintered nickel positive plates was examined by galvanostatic charging and discharging in a flooded electrolyte cell. Three different concentrations of potassium hydroxide (KOH) (40, 31, and 26 percent) and 31 percent KOH containing dissolved nitrate, sulfate, or silicate were investigated. The end-of-charge voltage at C/10 charge and at 10 degrees C showed the following order: 40 percent KOH greater than 31 percent KOH alone and in the presence of the anions greater than 26 percent KOH. The mid discharge voltage at C/2 discharge was higher in 26 percent KOH, almost the same for 31 percent KOH with and without added contaminants, and much lower for 40 percent KOH. The plate capacity was marginally affected by cycling in all cases except for 40 percent KOH, where the capacity declined after 1,000 cycles at 80 percent depth of discharge (DOD). At the end of cycling, all the plates tested experienced a weight loss, except in the case of 31 percent KOH, as a result of active material extrusion. Cyclic voltammetry of miniature electrodes in 31 percent KOH showed that the cathodic peak potentials are less polarized in the presence and absence of silicate at -5 degrees C compared to 25 degrees C indicating a slightly higher voltage during discharge in a Ni-H2 battery. Futhermore, the features of the current-potential profile were practically unchanged in the presence of silicate.
Vaidyanathan, Hari↗
Direct Observations of Ion Densities at Functionalized Interfaces to Test Hypotheses Regarding the Origin of Specific Ion Effects
Interactions of anions with protonatable groups were investigated using X-ray fluorescence near total reflection (XFNTR) on floating monolayers at the surface of water. The number of ions attracted to the interfacial region, which XFNTR measures directly, is ion-specific as well as monolayer-specific. Our observation of the distinctly different behaviors of ClO 4 – and ReO 4 – , two ions with the same tetrahedral structure and almost the same sizes and hydration enthalpies, challenges current theories of ion specificity. Our observations are inconsistent with not only the Gouy–Chapman model (as expected) but also size-modified Poisson–Boltzmann theory and the “law of matching water affinity”. Furthermore, we suggest that factors other than ion size and ion–water interactions, including possibly ion–ion interactions and lateral ordering at the interface, must be considered to account for specific ion effects.
36 MATERIALS SCIENCE↗
Relationship Between Equilibrium Forms of Lysozyme Crystals and Precipitant Anions
Molecular forces, such as electrostatic, hydrophobic, van der Waals and steric forces, are known to be important in determining protein interactions. These forces are affected by the solution conditions and changing the pH, temperature or the ionic strength of the solution can sharply affect protein interactions. Several investigations of protein crystallization have shown that this process is also strongly dependent on solution conditions. As the ionic strength of the solution is increased, the initially soluble protein may either crystallize or form an amorphous precipitate at high ionic strengths. Studies done on the model protein hen egg white lysozyme have shown that different crystal forms can be easily and reproducibly obtained, depending primarily on the anion used to desolubilize the protein. In this study we employ pyranine to probe the effect of various anions on the water structure. Additionally, lysozyme crystallization was carried out at these conditions and the crystal form was determined by X-ray crystallography. The goal of the study was to understand the physico-chemical basis for the effect of changing the anion concentration on the equilibrium form of lysozyme crystals. It will also verify the hypothesis that the anions, by altering the bulk water structure in the crystallizing solutions, alter the surface energy of the between the crystal faces and the solution and, consequently, the equilibrium form of the crystals.
Nadarajah, Arunan↗
Understanding the Electronic and Structural Effects in ORR Intermediate Binding on Anion‐Substituted Zirconia Surfaces
Abstract For oxygen reduction reaction (ORR), the surface adsorption energies of O and OH* intermediates are key descriptors for catalytic activity. In this work, we investigate anion‐substituted zirconia catalyst surfaces and determine that adsorption energies of O and OH* intermediates is governed by both structural and electronic effects. When the adsorption energies are not influenced by the structural effects of the catalyst surface, they exhibit a linear correlation with integrated crystal orbital Hamiltonian population (ICOHP) of the adsorbate‐surface bond. The influence of structural effects, due to the re‐optimisation slab geometry after adsorption of intermediate species, leads to stronger adsorption of intermediates. Our calculations show that there is a change in the bond order to accommodate the incoming adsorbate species which leads to stronger adsorption when both structural and electronic effects influence the adsorption phenomena. The insights into the catalyst‐adsorbate interactions can guide the design of future ORR catalysts.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Anions in Cometary Comae
The presence of negative ions (anions) in cometary comae is known from Giotto mass spectrometry of IP/Halley. The anions 0-, OH-, C-, CH- and CN- have been detected, as well as unidentified anions with masses 22-65 and 85-110 amu (Chaizy et al. 1991). Organic molecular anions are known to have a significant impact on the charge balance of interstellar clouds and circumstellar envelopes and have been shown to act as catalysts for the gas-phase synthesis of larger hydrocarbon molecules in the ISM, but their importance in cometary comae has not yet been explored. We present details of the first attempt to model the chemistry of anions in cometary comae. Based on the combined chemical and hydro dynamical model of Rodgers & Charnley (2002), we investigate the role of large carbon-chain anions in cometary coma chemistry. We calculate the effects of these anions on coma thermodynamics, charge balance and examine their impact on molecule formation.
Charnley, Steven B.↗
Anion Selectivities in Zwitterion Grafted Nanopores: Effect of Zwitterion Architecture
The separation of ions of similar charge is a crucial challenge in many applications, from water treatment to precious metal recovery. Membranes with cross-linked zwitterionic amphiphilic copolymer (ZAC-X) selective layers, which feature self-assembled, zwitterion-lined nanodomains for permeation, offer unique permselectivity between monovalent anions (e.g. $\mathrm{Cl^-}$/$\mathrm{F^-}$). This has motivated studies on the mechanisms of transport and selectivity in this family of materials. In this study, we conducted molecular dynamics simulations of aqueous salt solutions within zwitterion-functionalized nanopores to elucidate the influence of dipole orientation of the ZI ligands on anion diffusivities, partitioning, and permeabilities. Here, our model compares systems with contrasting ZI organization: surface-cation-anion ($\mathrm{S\text{-}ZI^{+}\text{-}ZI^{-}}$, Motif A) and surface-anion-cation ($\mathrm{S\text{-}ZI^{-}\text{-}ZI^{+}}$, Motif B). Our results reveal that Motif A exhibits less pronounced ion pairing due to a spatial separation in the radial profiles of cations and anions. Motif B demonstrates prominent ion pairing for smaller anions owing to their overlap with cation distributions. Further, our potential of mean force profiles reveal that anion partitioning increases with anion size in both ligand motifs, whereas Motif B exhibits significantly higher partitioning selectivity towards larger anions compared to Motif A. Our results for ion diffusivities show that the self-diffusivities of both anions and cations are lower for Motif B compared to Motif A. Such trends in anion partitioning and diffusivities can be explained by differences in the interactions and steric hindrance experienced by the anionic species in Motifs A and B. Finally, our results for anion permselectivity, obtained by combining partitioning and diffusivity, indicate that partitioning trends dominate over diffusivity trends. Consequently, anion permeability increases with anion size, and ligand Motif B yields much higher permselectivity towards larger anions compared to ligand Motif A.
anions↗
X-ray photoelectron spectroscopy of piperidinium ionic liquids: a comparison to the charge delocalised pyridinium analogues
In this study, nine piperidinium-based ionic liquids are analysed by X-ray photoelectron spectroscopy. The effect of alkyl substituent length and the nature of the anion on the electronic environment of the cation are investigated. The electronic environment of the hetero carbon and the cationic nitrogen is compared between two structurally similar cations, 1-octyl-1-methylpiperidinium ([C 8 C 1 Pip] + ) versus 1-octylpyridinium ([C 8 Py] + ). Due to the charge delocalisation, the hetero carbon component within [C 8 Py] + is more positively charged, which exhibits much higher binding energy; whilst the cationic nitrogen component is in the similar electronic environment. The impact of the charge delocalisation on the electronic environment of the anion is also compared between [C 8 C 1 Pip] + and [C 8 Py] + . Here, it is found that for the more basic anion, the cation can significantly affect the electronic environment of the anion; for the less basic anion, such an effect concentrates on the component bearing more negative point charges.
36 MATERIALS SCIENCE↗
Nuclear quantum effects on the quasiparticle properties of the chloride anion aqueous solution within the GW approximation
Photoelectron spectroscopy experiments in ionic solutions reveal important electronic structure information, in which the interaction between hydrated ions and water solvent can be inferred. Based on many-body perturbation theory with GW approximation, we theoretically compute the quasiparticle electronic structure of chloride anion solution, which is modeled by path-integral abinitio molecular dynamics simulation by taking account the nuclear quantum effects (NQEs). The electronic levels of hydrated anion as well as water are determined and compared with the recent experimental photoelectron spectra. It is found that NQEs improve the agreement between theoretical prediction and experiment because NQEs effectively weaken the hybridization of the between the Cl – anion and water. Furthermore, our study indicates that NQEs plays a small but non-negligible role in predicting the electronic structure of the aqueous solvation of ions of the Hofmeister series.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗