Search NASA⌕ Search

SEARCH · Search NASA

Results for “Atomic Control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Non-destructive Faraday imaging of dynamically controlled ultracold atoms

We describe an easily implementable method for non-destructive measurements of ultracold atomic clouds based on dark field imaging of spatially resolved Faraday rotation. The signal-to-noise ratio is analyzed theoretically and, in the absence of experimental imperfections, the sensitivity limit is found to be identical to other conventional dispersive imaging techniques. The dependence on laser detuning, atomic density, and temperature is characterized in a detailed comparison with theory. Due to low destructiveness, spatially resolved images of the same cloud can be acquired up to 2000 times. The technique is applied to avoid the effect of shot-to-shot fluctuations in atom number calibration, to demonstrate single-run vector magnetic field imaging and single-run spatial imaging of the system's dynamic behavior. This demonstrates that the method is a useful tool for the characterization of static and dynamically changing properties of ultracold atomic clouds.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Nanocell with a pressure-controlled Rb atomic vapor column thickness: Critical influence of the thickness on optical processes

A new device is designed: it consists of a nanocell (NC) filled with Rb atom vapors and placed in a vacuum chamber. When the pressure in the chamber changes in the range 0–1 atm, the NC thickness is smoothly varied in the range L = 140–1700 nm, which is caused by the pressure-induced deformation of thin garnet windows in the chamber. The pressure dependence has excellent reproducibility even after many hundreds of cycles of letting in of air and its complete pumping out from the chamber. The accuracy of setting required thickness L is much better than in the wedge-gap NCs to be moved mechanically that were used earlier. The processes of Faraday rotation (FR) of a polarization plane, resonance absorption, and fluorescence are studied using the D{sub 1}-line narrow-band continuous laser radiation when the thickness changes from L = λ/2 (398 nm) to L = 2λ (1590 nm) at a step λ/2. The FR signal is shown to be maximal at L = λ/2 and 3λ/2 and to have the minimum spectral width (≈60 MHz). At L = λ and 2λ, the FR signal is minimal and has the maximum spectral width (≈200 MHz). The resonance absorption demonstrates the same oscillating behavior; however, the effect in the case of FR is much more pronounced. The oscillating effect is absent for resonance fluorescence: its spectral width and amplitude increase monotonically with L. The detected effects are explained and possible applications are noted.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Prediction and Control of Atomic Ordering in Electrodeposited Binary Alloy Films: Direct Synthesis of L10 Magnetic Phases

Permanent magnet materials are essential components in renewable energy technology, underlying, electric vehicles, hybrids, wind turbines and more. Today commercial permanent magnets based on Nd-Fe-B exhibit an energy product of ~ 400 kJ/m 3 , capable to run wind turbines efficiently. Unfortunately, the supplies of rare-earth elements are centralized, and their availability may see volatility over time. This state of affairs stimulates the search for the search for rare-earth-free permanent magnetic materials. The L1 0 crystal structure underlines an important class of chemical ordered alloys that exhibit uniaxial magnetocrystalline anisotropy. This material has been considered an excellent candidate for rare-earth-free permanent magnets. In this program, a series of systematic experiments were performed and analysed in order to understand the effect of each. In order to synthesize L 10-Fe-Ni, one has to circumvent the sluggish kinetic and the limited driving force resulted from the low order-disorder temperature (~320°C) of the system. A strategy was found to trigger a martensitic transformation from the FCC phase to one of the non-cubic phases by high-strain methods. The body-centered tetragonal Fe-Ni obtained by this strategy was considered as a precursor of L10 Fe-Ni. The formation of BCT Fe-Ni via a displacive process was also implemented at the nanoscale by using tailored AuNi@FeNi core@shell.

36 MATERIALS SCIENCE↗

NIC atomic operation unit with caching and bandwidth mitigation

A network interface controller atomic operation unit and a network interface control method comprising, in an atomic operation unit of a network interface controller, using a write-through cache and employing a rate-limiting functional unit.

97 MATHEMATICS AND COMPUTING↗

Localization and Criticality in Antiblockaded Two-Dimensional Rydberg Atom Arrays

Controllable Rydberg atom arrays have provided new insights into fundamental properties of quantum matter both in and out of equilibrium. In this work, we study the effect of experimentally relevant positional disorder on Rydberg atoms trapped in a 2D square lattice under antiblockade (facilitation) conditions. We show that the facilitation conditions lead the connectivity graph of a particular subspace of the full Hilbert space to form a 2D Lieb lattice, which features a singular flat band. Remarkably, we find three distinct regimes as the disorder strength is varied: a critical regime, a delocalized but nonergodic regime, and a regime with a disorder-induced flat band. The critical regime’s existence depends crucially upon the singular flat band in our model, and is absent in any 1D array or ladder system. We propose to use quench dynamics to probe the three different regimes experimentally.

2-dimensional systems↗

Building Atomic and Plasmonic Devices via Electron Beams: from Desired Structures to Desired Properties

The evolution of the aberration correction in Scanning Transmission Electron Microscopy (STEM) has enabled multiple advances including high-resolution structural imaging, pm-level position detection of atomic columns, and ~3-5 mV resolution electron energy loss spectroscopy of the chemical and physical functionalities. These developments have further enabled the precise manipulation of the atomic structure of materials, including removal and formation of atomic planes in 3D materials, controlled atomic motion, and even direct atomic assembly of homo- and heteroatomic artificial molecules. Here, we will discuss several recent advances in STEM-EELS automated experiments as applied to quantum and nanoplasmonic systems.

42 ENGINEERING↗

Fine-tuned local coordination environment of Pt single atoms on ceria controls catalytic reactivity

Constructing single atom catalysts with fine-tuned coordination environments can be a promising strategy to achieve satisfactory catalytic performance. Herein, via a simple calcination temperature-control strategy, CeO 2 supported Pt single atom catalysts with precisely controlled coordination environments are successfully fabricated. The joint experimental and theoretical analysis reveals that the Pt single atoms on Pt 1 /CeO 2 prepared at 550 °C (Pt/CeO 2 -550) are mainly located at the edge sites of CeO 2 with a Pt–O coordination number of ca. 5, while those prepared at 800 °C (Pt/CeO 2 -800) are predominantly located at distorted Ce substitution sites on CeO 2 terrace with a Pt–O coordination number of ca. 4. Pt/CeO 2 -550 and Pt/CeO 2 -800 with different Pt 1 -CeO 2 coordination environments exhibit a reversal of activity trend in CO oxidation and NH 3 oxidation due to their different privileges in reactants activation and H 2 O desorption, suggesting that the catalytic performance of Pt single atom catalysts in different target reactions can be maximized by optimizing their local coordination structures.

36 MATERIALS SCIENCE↗

Scalable quantum computer architecture with coupled donor-quantum dot qubits

A quantum bit computing architecture includes a plurality of single spin memory donor atoms embedded in a semiconductor layer, a plurality of quantum dots arranged with the semiconductor layer and aligned with the donor atoms, wherein a first voltage applied across at least one pair of the aligned quantum dot and donor atom controls a donor-quantum dot coupling. A method of performing quantum computing in a scalable architecture quantum computing apparatus includes arranging a pattern of single spin memory donor atoms in a semiconductor layer, forming a plurality of quantum dots arranged with the semiconductor layer and aligned with the donor atoms, applying a first voltage across at least one aligned pair of a quantum dot and donor atom to control a donor-quantum dot coupling, and applying a second voltage between one or more quantum dots to control a Heisenberg exchange J coupling between quantum dots and to cause transport of a single spin polarized electron between quantum dots.

97 MATHEMATICS AND COMPUTING↗

Atomic-scale e-beam sculptor

A system and method (referred to as the system) fabricates controllable atomic assemblies in two and three dimensions. The systems identify by a non-invasive imager, a local atomic structure, distribution of vacancies, and dopant atoms and modify, by a microscopic modifier, the local atomic structure, via electron beam irradiation. The systems store, by a knowledge base, cause-and-effect relationships based on a non-invasive imaging and electron scans. The systems detect, by detectors, changes in the local atomic structure induced by the electron irradiation; and fabricate, a modified atomic structure by a beam control software and feedback.

Kalinin, Sergei V.↗

Built-In Potential in Fe 2 O 3 -Cr 2 O 3 Superlattices for Improved Photoexcited Carrier Separation

We demonstrate that the different surface terminations exhibited by α-Fe2O3 (hematite) and α-Cr2O3 (eskolaite) in superlattices (SL) of these materials, synthesized with exquisite control by molecular beam epitaxy, determine the heterojunction interface structure and result in controllable, non-commutative band offset values. Precise atomic control of the interface structure allowed us to vary the valence band offset from 0.35 eV to 0.79 eV. This controllable band alignment can be harnessed to generate a built-in potential in Fe2O3-Cr2O3 SLs. For instance, in a 2.5-period SL, a built-in potential of 0.8 eV was realized as measured by x-ray photoelectron spectroscopy of Ti dopants as probe species. The high quality of the SL structure was confirmed by atom probe tomography and scanning transmission electron microscopy. Enhanced photocurrents were measured for a thick Fe2O3 epitaxial film capped with an (Fe2O3)3-(Cr2O3)3 SL; this enhancement was attributed to efficient electron-hole separation in the SL as a result of the band alignment. The Fe-O-Cr bonds at the SL interfaces also red-shifted the onset of photoconductivity to ~1.6 eV. Exploiting the band alignment and photoabsorption properties of Fe2O3-Cr2O3 SLs has the potential to increase the efficiency of hematite-based photoelectrochemical water splitting.

Environmental Molecular Sciences Laboratory↗

Quantum control of multilevel atoms with rotational degeneracy using short laser pulses

We study the quantum control of multilevel atoms with rotationally degenerate levels using short laser pulses. Various control schemes are considered, ones using {pi} pulses, frequency-chirped pulses, two consecutive pulses, or two pulses that overlap each other partially. We study the possibilities of controlling the quantum state of an ensemble of atoms distributed randomly over one or more rotationally degenerate levels initially. For the sake of concreteness we use the hyperfine level scheme of the {sup 85}Rb D line, but the results can easily be generalized for any of the alkali-metal atoms used in cooling and trapping experiments. We find that even though a number of difficulties arise, such as unequal coupling constants between rotational sublevels or dephasing between different hyperfine levels during the interaction, control schemes using simple or multiphoton adiabatic passage can be used to control the internal states of the atoms effectively as well as the center-of-mass motion. Furthermore, it is shown that in some cases it is possible to exploit the inequality of the coupling constants to entangle the rotational substates with specific distinct translational quantum states and hence separate these substates in momentum space.

74 ATOMIC AND MOLECULAR PHYSICS↗

Precise control of alloying sites of bimetallic nanoclusters via surface motif exchange reaction

Here, precise control of alloying sites has long been a challenging pursuit, yet little has been achieved for the atomic-level manipulation of metallic nanomaterials. Here we describe utilization of a surface motif exchange (SME) reaction to selectively replace the surface motifs of parent [Ag 44 (SR) 30 ] 4– (SR = thiolate) nanoparticles (NPs), leading to bimetallic NPs with well-defined molecular formula and atomically-controlled alloying sites in protecting shell. A systematic mass (and tandem mass) spectrometry analysis suggests that the SME reaction is an atomically precise displacement of SR–Ag(I)–SR-protecting modules of Ag NPs by the incoming SR–Au(I)–SR modules, giving rise to a core-shell [Ag 32 @Au 12 (SR) 30 ] 4– . Theoretical calculation suggests that the thermodynamically less favorable core-shell Ag@Au nanostructure is kinetically stabilized by the intermediate Ag 20 shell, preventing inward diffusion of the surface Au atoms. The delicate SME reaction opens a door to precisely control the alloying sites in the protecting shell of bimetallic NPs with broad utility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Model based control of dynamic atomic force microscope

A model-based robust control approach is proposed that significantly improves imaging bandwidth for the dynamic mode atomic force microscopy. A model for cantilever oscillation amplitude and phase dynamics is derived and used for the control design. In particular, the control design is based on a linearized model and robust H{sub ∞} control theory. This design yields a significant improvement when compared to the conventional proportional-integral designs and verified by experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Tracking oxygen vacancy migration in memristor devices using operando hard X-ray photoelectron spectroscopy

Fabrication of ultrathin (sub-2 nm) oxide semiconductor memristors poses the fundamental challenge of achieving oxide growth with atomic precision in terms of electronic structure and defect formation. Recently, ultrathin memristors consisting of bilayers of mixed Al 2 O 3 and MgO atomic layers were fabricated using an in vacuo atomic layer deposition process. This approach offers a unique platform for precise atomic control of oxygen vacancies in the device in which the vacancies are introduced by placing MgO atomic layers between pristine Al 2 O 3 layers. In this work, we present a systematic operando Hard X-ray PhotoElectron Spectroscopy (HAXPES) study of the switching of such memristors, combined with complementary current-voltage and capacitance-voltage (C-V) measurements. We used a memristor stack of Al 2 O 3 /MgO atomic layers, with the MgO-containing oxide deposited on the bottom Al metal electrode and a pure Al 2 O 3 layer below the top Pd electrode. HAXPES analysis shows a substantial change in the chemical shift of the Aluminum oxide when switching between the ”OFF” and ”ON” states indicative of a redistribution of oxygen vacancies in the device active layer. Interestingly, subsequent switching to the OFF state shows hysteretic behavior indicating the retention of some oxygen vacancies in the top Al 2 O 3 layer. This vacancy retention can be correlated with the stochastic behavior of the switching voltage observed in these devices. C–V measurements show a clear frequency-dependent response in the OFF state, consistent with enhanced polarization and vacancy trapping at low frequencies.

47 OTHER INSTRUMENTATION↗

Understanding Structure–Property Relationships of MoO 3 -Promoted Rh Catalysts for Syngas Conversion to Alcohols

Rh-based catalysts have shown promise for the direct conversion of syngas to higher oxygenates. Although improvements in higher oxygenate yield have been achieved by combining Rh with metal oxide promoters, details of the structure of the promoted catalyst and the role of the promoter in enhancing catalytic performance are not well understood. In this work, we show that MoO 3 -promoted Rh nanoparticles form a novel catalyst structure in which Mo substitutes into the Rh surface, leading to both a 66-fold increase in turnover frequency and an enhancement in oxygenate yield. By applying a combination of atomically controlled synthesis, in situ characterization, and theoretical calculations, we gain an understanding of the promoter-Rh interactions that govern catalytic performance for MoO 3 -promoted Rh. We use atomic layer deposition to modify Rh nanoparticles with monolayer-precise amounts of MoO 3 , with a high degree of control over the structure of the catalyst. Through in situ X-ray absorption spectroscopy, we find that the atomic structure of the catalytic surface under reaction conditions consists of Mo–OH species substituted into the surface of the Rh nanoparticles. Furthermore, using density functional theory calculations, we identify two roles of MoO 3 : first, the presence of Mo–OH in the catalyst surface enhances CO dissociation and also stabilizes a methanol synthesis pathway not present in the unpromoted catalyst; and second, hydrogen spillover from Mo–OH sites to adsorbed species on the Rh surface enhances hydrogenation rates of reaction intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-quality epitaxial CoFe/Si(111) heterostructures fabricated by low-temperature molecular beam epitaxy

We demonstrate atomically controlled heterojunctions consisting of ferromagnetic CoFe alloys and silicon (Si) using low-temperature molecular beam epitaxy with a good atomic matching at the (111) plane. The saturation magnetization of the CoFe layers grown reaches {approx}85% of the value of bulk samples reported so far, and can be systematically controlled by tuning the ratio of Co to Fe, indicating that the silicidation reactions between CoFe and Si are suppressed and the heterojunctions are very high quality. We find that the Schottky barrier height of the high-quality CoFe/Si(111) junctions is unexpectedly low compared to the previous data for other metal/Si ones, implying the reduction in the Fermi-level-pinning effect. We can expand the available high-quality ferromagnet/Si heterostructures in the field of Si-based spintronics.

36 MATERIALS SCIENCE↗