Search NASA⌕ Search

SEARCH · Search NASA

Results for “BASELINE REGULARIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Evaluation of Electrochemically Generated Potable Water Disinfectants for Use on the International Space Station

Microbial contamination and subsequent growth in spacecraft water systems are constant concerns for missions involving human crews. The current potable water disinfectant is iodine; however, with the end of the Space Shuttle program, there is a need to develop redundant biocide systems which are less dependent on hardware that would need to be launched on a regular basis. Three systems for electrochemical production of potable water disinfectants are being assessed for use on the International Space Station (ISS). Since there is a wide variability in the literature with regards to efficacy in both concentration and exposure time of these disinfectants, there is a need to establish baseline efficacy values. This paper describes a series of tests performed in order to establish optimal concentrations and exposure times for four disinfectants against single and mixed species planktonic and biofilm bacteria and to determine whether these electrochemical disinfection devices are able to produce a sufficient amount of chemical in both concentration and volume to act as a biocide for potable water on ISS.

Vega, Leticia↗
NASA NTRS2010

Ultra-Rapid dUT1 Measurements on Japan-Fennoscandian Baselines - Application to 24-hour Sessions

GSI, NICT, OSO, and MRO have been engaged in Ultra-rapid dUT1 experiments since 2007 aiming at the technological possibility of real-time dUT1 results using the e-VLBI technique. We have already successfully determined dUT1 in less than four minutes after the end of an experimental Intensive session in 2008, and at present we routinely get the results within 30 minutes for regular Intensives. In 2009 we applied the technique to 24-hour sessions and continuously obtained dUT1 values by processing and analyzing Tsukuba Onsala data in near real-time. It showed a detailed behavior of UT1 variations, which could be very valuable for scientific study as well as for precise prediction of UT1-UTC.

Matsuzaka, Shigeru↗
NASA NTRS2013

The BKG/IGGB VLBI Analysis Center

In 2012, the activities of the BKG/IGGB VLBI Analysis Center, as in previous years, consisted of routine computations of Earth orientation parameter (EOP) time series and of a number of research topics in geodetic VLBI. The VLBI group at BKG continued its regular submissions of time series of tropospheric parameters and the generation of daily SINEX (Solution INdependent EXchange format) files. Quarterly updated solutions have been computed to produce terrestrial reference frame (TRF) and celestial reference frame (CRF) realizations. Routine computations of the UT1-UTC Intensive observations include all sessions of the Kokee-Wettzell and Tsukuba-Wettzell baselines and the networks Kokee-Svetloe-Wettzell and Ny-degAlesund-Tsukuba-Wettzell. The VLBI group at BKG developed a procedure to get the most probable station positions of Tsukuba after the earthquake on March 11, 2011 for the epochs of the Intensive sessions. The analysis of the Intensive sessions with station Tsukuba could be resumed in February 2012. At IGGB, the emphasis has been placed on individual research topics.

Thorandt, Volkmar↗
DOE OSTI2025

Automated Waterbox Inspection for Nuclear Power Plants Using Computer Vision - Based Change Detection

Nuclear power plant waterboxes require regular inspection for leaks, missing components, and structural damage during maintenance outages. Traditional manual inspection is time-consuming and poses safety risks from confined space entry. We developed an automated computer vision system for drone-based waterbox inspection in partnership with Florida Light and Power. Our approach uses feature detection and matching to identify critical changes between baseline and current inspection images, automatically flagging additions (leaks/debris), removals (missing plugs), and translations (displaced components) while compensating for drone movement and environmental variations. We systematically evaluated six feature matching methods, from classical approaches (SIFT+BF) to state-of-the-art neural networks (SuperPoint+SuperGlue), using both standard benchmarks (HPatches) and waterbox-specific validation with real-world augmentations. SuperPoint+SuperGlue achieved superior performance with 7.82 pixels RMSE and 100% success rate—2.8x better accuracy than our baseline. While the pre-trained model has commercial licensing restrictions for nuclear deployment, our findings validate this architecture for custom training. We implemented a real-time GUI demonstrating the SIFT+BF approach for immediate deployment, processing drone feeds at 30 FPS with color-coded change visualization. Future work includes training a custom SuperPoint+SuperGlue model on waterbox data and integrating Vision-Language Models for automated reporting and maintenance guidance.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗
NASA NTRS1986

Sleep, sleepiness, and circadian rhythmicity in aircrews operating on transatlantic routes

A two-phase study was performed on B-747 crew members operating on regular passenger flights with 9-h time difference. In phase I, sleep-log surveys were obtained. The results for the layover period indicate congruent sleep patterns with shifts in sleep onset less than 9 h; sleep duration was prolonged. Phase II consisted of polygraphic sleep recordings and multiple sleep latency tests (MSLTs) applied to four cockpit crews in a baseline period, during the layover, and after return to home base. During the layover, mean bed times were shifted by about 4.5 h, and sleep was disturbed by early and prolonged awakenings which led to a reduction of sleep efficiency. The ECG and rectal temperature recordings gave evidence for a desynchronization of the circadian system and an internal dissociation of different body functions.

Wegmann, Hans M.↗
NASA NTRSDate not supplied

Objectively Identifying Transverse Cirrus Bands in Tropical Cyclones using a Convolutional Neural Network

Transverse cirrus bands (TCBs) are bands of upper-level clouds regularly seen in mesoscale and synoptic-scale weather systems. In tropical cyclones, their appearance has been subjectively linked to intensification and the diurnal cycle. However, these hypothesized relationships have not been rigorously tested due to the subjective nature of TCBs in satellite images. A machine learning technique that successfully identifies TCBs objectively in imagery from the GOES-16 Advanced Baseline Imager (ABI) has been developed to solve this problem. The technique uses a U-Net convolutional neural network (CNN) that assigns a probability to each pixel in an image based on the likelihood of the pixel being associated with a TCB. Using the U-Net CNN, a database of TCBs from 2019 to 2022 was developed for the Atlantic tropical cyclone basin by defining an appropriate probability threshold that defines the difference between TCB and non-TCB pixels. This threshold is where the Jaccard score, calculated using manually identified TCBs and model identified TCBs, is maximized. Statistics for TCB occurrence will also be presented, including the relationships between TCBs and storm relative motion, shear relative direction, cardinal direction, tropical cyclone intensity, tropical cyclone intensification rates, and time of day.

John Mark Mayhall↗
DOE OSTI2025

Neural network-based classification and regression of magnetohydrodynamic modes in tokamaks

We present a machine learning-based magnetohydrodynamic (MHD) classifier and regressor that utilizes real or complex-valued 3D magnetic sensor array data to determine neoclassical tearing mode (NTM) onset times in tokamaks with millisecond accuracy. The input dataset consists of poloidal profiles of complex Fourier amplitudes with an n = 1 toroidal mode number from 144 human-labeled ITER Baseline Scenario discharges in the DIII-D tokamak, spanning both tearing-dominated and sawtooth-dominated regimes. Since m, n = 2,1 NTMs frequently emerge alongside sawteeth at the same frequency in this scenario, the focus is on isolating the m = 1 and m = 2 components of the n = 1 MHD mode near the tearing onset. To improve model regularization and prediction stability, singular value decomposition was applied to balance the sawtooth and tearing datasets. The enriched datasets facilitated training neural networks that learn the key distinguishing features of sawtooth and tearing modes in the poloidal profiles of their magnetic amplitude and phase. When the modes occur independently, the networks achieve perfect classification due to the modes’ distinct characteristics and low measurement noise. In the more experimentally relevant case where both modes coexist, the networks maintain exceptional performance across key metrics. Tests on synthetic data with known ground truth demonstrate the superior accuracy of the neural network trained on complex-valued input compared to models using real amplitude, phase, or pseudo-complex data, achieving both a mean time delay and standard deviation below 1 ms. Notably, standard linear regression methods fitting the dominant singular modes to the data closely match the neural network’s performance. Applying these methods across a broad range of H-mode scenarios will enable future studies to systematically identify dominant NTM triggers as scenario-specific variables, paving the way for more effective tearing mode avoidance strategies in future fusion reactor designs.

machine learning↗
NASA NTRS2024

Investigating Biases in VLBI Clock Functions and Position Solutions

A systematic bias causing a statistically significant drift between group delay and phase delay measurements in geodetic Very Long Baseline Interferometry (VLBI)has long been present. The cause of this drift remains unknown, although it is readily reproduced in VLBI experiments including a short baseline such as those conducted with the twin 13-meter telescopes at the Wettzell observatory, given the station names WETTZ13N and WETTZELL. This statistical incompatibility has been an obstacle in adopting phase delays in routine VLBI processing. The aim of this study is to provide additional evidence to aid in identifying the source of this systematic bias. A series of four regular VLBI experiments are processed with both group delays and phase delays, and post fit residuals, estimated positions, and clock functions are presented with and without phase calibration applied. These results are also computed for individual intermediate frequency bands.

Geodesy↗
NASA NTRSDate not supplied

Objectively Identifying Transverse Cirrus Bands in Tropical Cyclones using a Convolutional Neural Network

Transverse cirrus bands (TCBs) are bands of upper-level clouds that are regularly seen in mesoscale and synoptic-scale weather systems. In tropical cyclones, their appearance has been subjectively linked to intensification and the diurnal cycle, but these hypothesized relationships have not been rigorously tested due to the difficulty of objectively identifying TCBs in satellite images. This presentation describes a machine learning technique that successfully identifies TCBs in imagery from the GOES-16 Advanced Baseline Imager. The technique uses a convolutional neural network (CNN) that assigns a probability of each pixel in the image being associated with a TCB. Using the CNN, a database of TCBs from 2018 to 2022 was developed for the Atlantic basin. Statistics using this database will be presented, including the relationship between TCBs and deep-layer vertical wind shear, intensity change, and the TC diurnal cycle.

John Mark Mayhall↗
DOE OSTI2021

Basin scale distributions of dissolved manganese, nickel, zinc and cadmium in the Mediterranean Sea

Samples for dissolved trace metal concentrations were collected during GEOTRACES expedition GA04-N in summer/spring in the Mediterranean Sea, starting in the Atlantic Ocean and sampling both deep basins of the Mediterranean Sea. Outflow of Mediterranean Outflow Water leads to elevated concentrations of Mn, Ni and Zn in the Atlantic Ocean, but a concentration minimum in the Atlantic distribution of Cd. Nevertheless, when comparing the in- and outflow, the Mediterranean is a net source of Cd to the Atlantic Ocean. Surface concentrations of Mn, Ni, Zn and Cd are elevated in the Mediterranean relative to the Atlantic Ocean where Ni and Cd gradually increased along the eastward surface water flow path, Zn reached a homogenous concentration in the order of 1 to 1.5 nM, and Mn displayed a patchy surface distribution. The observed differences are attributable to the different dynamics of their biogeochemical cycling, notably the partitioning between the dissolved and particulate phases due to biological uptake, scavenging and possibly organic complexation. The elevated surface concentrations of Mn, Ni, Zn and Cd in the Mediterranean are derived from atmospheric deposition, where most likely Zn and Cd are mainly sourced from anthropogenic origin, Mn mostly from lithogenic origin and Ni from both anthropogenic and lithogenic origin. Dissolved Zn and Cd, as well as phosphate and nitrate, display striking inter-basin fractionations with elevated concentrations in the deep water of the western basin compared to the deep eastern basin, without a coinciding increase in the apparent oxygen utilization. Given that physical circulation or contribution from biogenic particulate metals cannot explain the elevated dissolved concentrations, an external non-biological source is required. This source is most likely a vertical flux of metal laden particles dissolving through the water column of the western Mediterranean where these particles, most likely from anthropogenic origin, are derived from either atmospheric deposition or particulate material deposited on the continental shelves that makes its way into the deep basin. Furthermore, to confirm or detect trends in dissolved metal concentrations in the deep basin, regular basin wide assessments of the trace metal distributions in the Mediterranean are needed. The distributions of Mn, Ni, Zn and Cd in the Sea of Marmara illustrate that all of these metals can be affected by anthropogenic surface sources and highlight the different susceptibilities of the dissolved metal distributions to supply from remineralization, and to removal through scavenging. This study provides a first baseline to assess future changes and underlines that the Mediterranean marine environment is susceptible to anthropogenic disturbances, with varying effects for different metals due to differing source strengths and biogeochemical cycles.

58 GEOSCIENCES↗
DOE OSTI2022

Effectiveness of supervised exercise, home-based exercise, or walk advice strategies on walking performance and muscle endurance in patients with intermittent claudication (SUNFIT trial): a randomized clinical trial

Abstract Aims Supervised exercise is a guideline-recommended treatment in intermittent claudication (IC). Hospital-based supervised exercise programmes (SEPs) are underutilized, while home-based structured exercise programmes (HSEPs) have attracted interest. The results from HSEP in IC are inconsistent and may confer no benefit over walk advice (WA) and be less effective than SEP. The aim of the study was to compare the effectiveness of best medical treatment, including Nordic pole WA alone, or WA + SEP or WA + HSEP for patients with IC. Methods and results This three-armed, multicentre randomized clinical trial enrolled patients with IC; all patients received best medical treatment including walking poles and the advice of regular Nordic pole walking (WA). For HSEP and SEP, additional exercise programmes were provided. The primarily investigated hypothesis was a non-inferiority analysis of SEP vs. HSEP regarding the 6-min walk test (6MWT) maximum distance, with a pre-defined non-inferiority margin of 50 m. Supporting outcomes included muscle endurance tests and the walking impairment questionnaire. Outcomes were assessed at baseline, 3, 6, and 12 months by a blinded evaluator. Altogether 166 patients (mean age 72 years; 59% males) were randomized. In HSEP and SEP, 24 and 26% patients, respectively, were fully exercise adherent. All three groups improved pain-free walking distance over time, but there were no significant intergroup differences. The intergroup 6MWT difference between SEP and HSEP from 0 to 12 months was –11.6 m, 95% confidence interval: –36.4 to 13.0 m (i.e. within the pre-specified non-inferiority margin). Conclusion The HSEP was non-inferior to SEP in patients with IC. There were no significant differences observed between the three groups at 1 year. Registration ClinicialTrials.gov: NCT02341716.

Sandberg, Anna (ORCID:0000000258432784)↗
NASA NTRS2019

Cloud Computing Methods for Near Rectilinear Halo Orbit Trajectory Design

Complicated mission design problems require innovative computational solutions. As spacecraft depart from a proposed Gateway in a Near Rectilinear Halo Orbit (NRHO), recontact analysis is required to avoid risk of collision and ensure safe operations. Escape dynamics from NRHOs are governed by multiple gravitational bodies, yielding a trajectory design space that is exhaustively large. This paper summarizes the recontact analysis for departure from the NRHO and describes how the Deep Space Trajectory Explorer (DSTE) trajectory design software incorporates high performance cloud computing to compute and visualize the orbit design space. Recent focus on exploration missions to cislunar space has kindled accelerated interest in multibody orbit solutions. Trajectory analysis in the presence of multiple gravity fields is complex, and innovative computational tools are needed to simplify complicated design spaces, to generate large quantities of data quickly, and to visualize the output for user accessibility. The Gateway mission is a prime example. The Gateway1 is proposed as a human outpost in deep space. The current baseline orbit for the Gateway is a Near Rectilinear Halo Orbit (NRHO) near the Moon.2 The NRHO exists in a regime that experiences the gravitational effects of the Earth and the Moon simultaneously, complicating orbit analysis. The mission design process benefits greatly from updated computational tools for multibody missions like the Gateway. As an example, consider the problem of assessing the risk of collision in an NRHO. As a staging location to missions to the lunar surface and beyond the Earth-Moon system, the Gateway will experience spacecraft and other objects regularly arriving and departing. Departing objects potentially include spent logistics modules, visiting crew vehicles, debris objects, wastewater particles, and cubesats. Each departure is governed by the dynamics of the Gateway orbit and the surrounding dynamical environment. Over time, any unmaintained object in such an orbit eventually departs due to the small instabilities associated with the NRHOs. A separation maneuver speeds the departure from the NRHO, but the effects of the maneuver on the spacecraft behavior depend on the location, magnitude, and direction of the burn. Escape dynamics from the NRHO with regard to these maneuver options open up an enormous potential trajectory design space where subtle changes in input can produce dramatically large changes in the results. Any departing object must avoid recontacting the Gateway as it leaves the lunar vicinity, and a recontact analysis thus involves a significant number of computations and extensive output data. To explore the dynamics of this extensive design space, the Deep Space Trajectory Explorer3 (DSTE) trajectory design software incorporates new High Performance Computing (HPC) services and novel interactive visualizations. This paper details the HPC and cloud infrastructure techniques that are implemented in the DSTE, applying the new capabilities to analysis of recontact risk with the Gateway in NRHO. NEAR RECTILINEAR HALO ORBITS The Gateway is planned to fly in a lunar NRHO as its baseline orbit. The NRHO families of orbits are subsets of the larger halo families, which originate from planar orbits near the L1 and L2 libration points; the Earth-Moon L2 halo family appears in Figure 1. Each halo orbit is perfectly periodic in the Circular Restricted 3-Body Problem (CR3BP) and becomes a quasi-periodic orbit in a higher fidelity ephemeris force model. The NRHOs are defined as those members of the halo family with bounded stability properties;2 they pass near the Moon at perilune and are nearly polar. Families exist with apolunes located both above the lunar north pole and above the lunar south pole; the Gateway is planned to reside in a southern L2 NRHO in a 9:2 resonance with the lunar synodic period. The 9:2 NRHO is characterized by a period of about 6.5 days, a perilune radius of about 3,500 km, and an apolune radius of about 71,000 km; it is strongly affected by the gravity of both the Earth and the Moon simultaneously. This NRHO offers extended communications with assets on the south pole of the Moon,4 as well as low-cost orbit maintenance and attitude control,5 favorable eclipse avoidance properties,6 and inexpensive transfers from Earth and to other destinations.5,7 The NRHO portion of the southern L2 halo family is highlighted in black in Figure 1, and the 9:2 NRHO appears in blue.

Phillips, Sean M.↗
NASA NTRS2012

The Performance of Current Atmospheric Radiation Codes in Phase I of CIRC

The Continual Intercomparison of Radiation Codes (CIRC) is intended as an evolving and regularly updated reference source for evaluation of radiative transfer (RT) codes used in Global Climate Models and other atmospheric applications. In our presentation we will discuss our evaluation of the performance of 13 shortwave and 11 longwave RT codes that participated in Phase I of CIRC. CIRC differs from previous intercomparisons in that it relies on an observationally validated catalogue of cases. The seven CIRC Phase I baseline cases, five cloud-free, and two with overcast liquid clouds, are built around observations by the Atmospheric Radiation Measurements (ARM) program that satisfy the goals .of Phase I, namely to examine RT model performance in realistic, yet not overly complex, atmospheric conditions. Besides the seven baseline cases, additional idealized "subcases" are also examined to facilitate interpretation of model errors. We will quantify individual model performance with respect to reference line-by-line calculations, and will also highlight RT code behavior for conditions of doubled CO2 , aspects of utilizing a spectral specification of surface albedo, and the impact of the inclusion of scattering in the thermal infrared. Our analysis suggests that RT codes should work towards improving their calculation of diffuse shortwave flux, shortwave absorption, treatment of spectral surface albedo, and shortwave CO2 forcing. Despite practical difficulties in comparing our results to previous results by the Intercomparison of Radiation Codes in Climate Models (ICRCCM) conducted about 20 years ago, it appears that the current generation of RT codes do indeed perform better than the codes of the ICRCCM era. By enhancing the range of conditions under which participating codes are tested, future CIRC phases will hopefully allow even more rigorous examination of RT code performance.

Oreopoulos, L.↗
DOE OSTI2025

Day-Ahead Forecasting with Federated LSTM to Plan Energy Sharing in a Community Microgrid

Energy balancing in microgrids is a key enabler of resilience. Community microgrids located close to each other have the added benefit of networking and sharing surplus energy, if available. Such complex decision-making runs on optimization that requires reliable short-term (up to very-short-term) forecasts of energy generation and consumption for scheduling or trading. Each microgrid may also opt to not expose their sensitive data such as consumption patterns of individual businesses or residences. This paper investigates a federated approach to dayahead forecasting that trains naive long short-term memory (LSTM) at each business in a microgrid and aggregates weights at the microgrid controller using proximal regularization. This approach ensures that the controller has access only to energy surplus/deficit and not the actual generation or consumption values, avoiding unwanted exposure of sensitive data. A community microgrid in Adjuntas, Puerto Rico with 3 businesses is selected as a case study with a laboratory-scale computing setup. A central LSTM forecaster, where sensitive data from businesses are aggregated at the controller, is implemented as a baseline for qualifying the results. This work serves as a proof-of-concept for scaling the approach to networked and nested microgrids with more complex control options.

Sundararajan, Aditya [ORNL] (ORCID:000000033577854↗
NASA NTRS2005

Proof-of-Concept Trajectory Designs for a Multi-Spacecraft, Low-Thrust Heliocentric Solar Weather Buoy Mission

A new solar weather mission has been proposed, involving a dozen or more small spacecraft spaced at regular, constant intervals in a mutual heliocentric circular orbit between the orbits of Earth and Venus. These solar weather buoys (SWBs) would carry instrumentation to detect and measure the material in solar flares, solar energetic particle events, and coronal mass ejections as they flowed past the buoys, serving both as science probes and as a radiation early warning system for the Earth and interplanetary travelers to Mars. The baseline concept involves placing a mothercraft carrying the SWBs into a staging orbit at the Sun-Earth L1 libration point. The mothercraft departs the L1 orbit at the proper time to execute a trailing-edge lunar flyby near New Moon, injecting it into a heliocentric orbit with its perihelion interior to Earth s orbit. An alternative approach would involve the use of a Double Lunar Swingby (DLS) orbit, rather than the L1 orbit, for staging prior to this flyby. After injection into heliocentric orbit, the mothercraft releases the SWBs-all equipped with low-thrust pulsed plasma thrusters (PPTs)-whereupon each SWB executes a multi-day low-thrust finite bum around perihelion, lowering aphelion such that each achieves an elliptical phasing orbit of different orbital period from its companions. The resulting differences in angular rates of motion cause the spacecraft to separate. While the lead SWB achieves the mission orbit following an insertion burn at its second perihelion passage, the remaining SWBs must complete several revolutions in their respective phasing orbits to establish them in the mission orbit with the desired longitudinal spacing. The complete configuration for a 14 SWB scenario using a single mothercraft is achieved in about 8 years, and the spacing remains stable for at least a further 6 years. Flight operations can be simplified, and mission risk reduced, by employing two mothercraft instead of one. In this scenario: the second mothercraft stays in a libration-point or DLS staging orbit until the first mothercraft has achieved nearly 180 separation from the Earth. The timing of the second mothercraft's subsequent lunar flyby is planned such that this spacecraft will be located 180 from the first mothercraft upon completion of its heliocentric circularization maneuvers. Both groups of satellites then only have to spread out over 180 to obtain full 360 coverage around the Sun.

Muller, Ronald↗
NASA NTRS1992

The LDCE Particle Impact Experiment as flown on STS-46

Many materials and techniques have been developed by the authors to sample the flux of particles in Low Earth Orbit (LEO). Though regular in-site sampling of the flux in LEO the materials and techniques have produced data which compliment the data now being amassed by the Long Duration Exposure Facility (LDEF) research activities. Orbital debris models have not been able to describe the flux of particles with d sub p less than or = 0.05 cm, because of the lack of data. Even though LDEF will provide a much needed baseline flux measurement, the continuous monitoring of micron and sub-micron size particles must be carried out. A flight experiment was conducted on the Space Shuttle as part of the LDCE payload to develop an understanding of the Spatial Density (concentration) as a function of size (mass) for particle sizes 1 x 10(exp 6) cm and larger. In addition to the enumeration of particle impacts, it is the intent of the experiment that hypervelocity particles be captured and returned intact. Measurements will be performed post flight to determine the flux density, diameters, and subsequent effects on various optical, thermal control and structural materials. In addition to these principal measurements, the Particle Impact Experiment (PIE) also provides a structure and sample holders for the exposure of passive material samples to the space environment, e.g., thermal cycling, and atomic oxygen, etc. The experiment will measure the optical property changes of mirrors and will provide the fluence of the ambient atomic oxygen environment to other payload experimenters. In order to augment the amount of material returned in a form which can be analyzed, the survivability of the experiment as well as the captured particles will be assessed. Using Sandia National Laboratory's hydrodynamic computer code CTH, hypervelocity impacts on the materials which comprise the experiments have been investigated and the progress of these studies are reported.

Maag, Carl R.↗
NASA NTRS1996

Preliminary Comparison of Two-Way Satellite Time and Frequency Transfer and GPS Common-View Time Transfer During the INTELSAT Field Trial

For a decade and a half Global Positioning System (GPS) common-view time transfer has greatly served the needs of primary timing laboratories for regular intercomparisons of remote atomic clocks. However, GPS as a one-way technique has natural limits and may not meet all challenges of the comparison of the coming new generation of atomic clocks. Two-way satellite time and frequency transfer (TWSTFT) is a promising technique which may successfully complement GPS. For two years, regular TWSTFT's have been performed between eight laboratories situated in both Europe and North America, using INTELSAT satellites. This has enabled an extensive direct comparison to be made between these two high performance time transfer methods. The performance of the TWSTFT and GPS common view methods are compared over a number of time-transfer links. These links use a variety of time-transfer hardware and atomic clocks and have baselines of substantially different lengths. The relative merits of the two time-transfer systems are discussed.

Davis, John A.↗
DOE OSTI2020

Performance Assessments of Demand Flexibility from Grid-Interactive Efficient Buildings: Issues and Considerations

This SEE Action Network report explains basic concepts and fundamental considerations for assessing the actual demand flexibility performance of buildings participating in demand flexibility programs and responding to time-varying retail rates. Demand flexibility is the capability of distributed energy resources (DERs) to adjust a building’s load profile across different timescales. Assessments determine the timing, location, quantity, and quality of grid services provided. The results can be used for financial settlements and to improve performance of demand flexibility, support its consideration in resource potential studies and electricity system planning, and contribute to cost-effectiveness evaluations. While practitioners and regulators regularly find opportunities to improve performance assessments of demand-related services, to a large degree current best practices are sufficient for basic service offerings as demand flexibility is implemented today. However, advances in assessment practices will be required in a future with grid-interactive efficient buildings (GEBs) that provide continuous demand flexibility by integrating multiple DERs and flexibility modes (load shed, load shift, modulate, and generate). Example practices include using new baseline constructs—including whether baselines are even required for certain building flexibility modes or configurations, deploying more advanced metering and analytics, further developing cybersecurity standards, improving communication standards for increased interoperability, and establishing performance metrics and assessment procedures for load modulation as it is more fully defined and implemented. This report provides information on prioritizing and designing performance assessment elements for demand flexibility programs and time-varying retail rates, assessment protocols, and research and development needs. Additional research sponsored by DOE’s Building Technologies Office offers more detailed technical information on assessing performance of demand flexibility, including definition of performance metrics.

24 POWER TRANSMISSION AND DISTRIBUTION↗