Search NASA⌕ Search

SEARCH · Search NASA

Results for “BEAM SWITCHING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Measurement of the Energy Spread for CeC Project

The Coherent Electron Cooling requires small energy spread and uniformity of energy along the bunch. The diagnostics line is utilized for the measurement of the electron beam parameters. The beamline layout is shown in Fig. 1. Three quadrupoles after the linac are used to match beam into the common section. The main dipole is used to deflect beam towards common section. If it is switched off the beam goes to the diagnostics line. The beam optics in the diagnostics line is controlled by four quadrupoles. The deflecting cavity sweeping beam in the vertical direction follows the quadrupoles. Sector dipole is used for energy parameters measurement. It has deflection angle of 30 degrees. With diagnostics dipole switched off the beam propagated to the insertable slits system for emittance measurement. There are four profile monitors in the line, The first profile monitor (ACC YAG) is after the main dipole. The second profile monitor (YAG3) is in front of the diagnostics dipole after the deflecting cavity. YAG1 profile monitor is placed after the slits, and YAG2 profile monitor is placed after the diagnostics dipole. There is a solenoid between the deflecting cavity and YAG3. It is used for the beam energy measurement.

43 PARTICLE ACCELERATORS↗
NASA NTRS1992

Non-mechanical optical path switching and its application to dual beam spectroscopy including gas filter correlation radiometry

A non-mechanical optical switch is developed for alternately switching a monochromatic or quasi-monochromatic light beam along two optical paths. A polarizer polarizes light into a single, e.g., vertical component which is then rapidly modulated into vertical and horizontal components by a polarization modulator. A polarization beam splitter then reflects one of these components along one path and transmits the other along the second path. In the specific application of gas filter correlation radiometry, one path is directed through a vacuum cell and one path is directed through a gas correlation cell containing a desired gas. Reflecting mirrors cause these two paths to intersect at a second polarization beam splitter which reflects one component and transmits the other to recombine them into a polarization modulated beam which can be detected by an appropriate single sensor.

Sachse, Glen W.↗
NASA NTRS1980

Concepts for 20/30 GHz satcom systems for direct-to-user applications

A baseline technique is described for implementing a direct-to-user (DTU) satcom communications system at 20/30 GHz transmission frequency. The purpose of this application is to utilize the high capacity frequency spectrum at K(A) band for communications among thousands of small terminals located at or close to a customer's facility. The baseline DTU system utilizes a TDMA method of communications with QPSK modulation. Twenty-five coverage beams from a geosynchronous orbit spacecraft provide full coverage of CONUS. Low cost terminals are limited to less than 4.5 meters diameter. The impact of rain attenuation on communications availability is examined. Other techniques including satellite switched antenna beams are outlined and critical K(A)-band technology developments are identified.

Jorasch, R.↗
DOE OSTI2025

Characterization of fluorite-structured ferroelectrics using transmission electron microscopy: Techniques, challenges, and recent advances

Fluorite-structured ferroelectrics, such as hafnium oxide and its alloyed variants, are key candidates for next-generation memory devices. Yet, fundamental questions about switching mechanisms, domain dynamics, and phase evolution remain open. Transmission electron microscopy (TEM) provides unique capabilities to address these challenges by simultaneously resolving the positions of anions and cations, chemical variations, and structural transformations. Recent advances—including in situ heating, electron beam-induced switching, electron energy loss spectroscopy, and differential phase contrast imaging—have revealed critical insights into phase transitions, potential switching pathways, and oxygen vacancy behavior. However, experimental barriers such as TEM sample-preparation-induced artifacts, high coercive fields, and imaging constraints persist, especially for polycrystalline films. By offering a focused overview of current TEM developments in fluorite ferroelectrics, this work outlines how TEM contributes to understanding key phenomena and proposes a roadmap for future studies.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ferroelectric Switching in Hybrid Molecular-Beam-Epitaxy-Grown BaTiO 3 Films

Molecular beam epitaxy (MBE) is a promising synthesis technique for both heterostructure growth and epitaxial integration of ferroelectric BaTiO 3 . However, direct measurement of the remnant polarization (P r ) has not been previously reported in MBE-grown BaTiO 3 films. We report the in situ growth of an all-epitaxial SrRuO 3 /BaTiO 3 /SrRuO 3 heterostructure on Nb-doped SrTiO 3 (001) substrates by hybrid MBE using metal–organic precursors. This capacitor structure consisting of 16 nm SrRuO 3 /40 nm BaTiO 3 /16 nm SrRuO 3 shows hysteretic polarization–electric field (P–E) curves with P r ∼ 15 μC cm –2 at frequencies ranging from 500 Hz to 20 kHz, after isolating the intrinsic ferroelectric response from non-ferroelectric contributions using the Positive-Up-Negative-Down (PUND) method. We hypothesize that the asymmetry in switching behavior and current leakage has origins in structural defects. Furthermore, this work opens the door to defect-engineered ferroelectric BaTiO 3 -based heterostructures grown by hybrid MBE for future electronic, photonic and spintronic applications.

SrRuO3 electrode↗
DOE OSTI2022

Performance of discontinuity-free components produced by additive turning computer aided manufacturing strategy

Computer aided manufacturing (CAM) techniques for directed energy deposition (DED) affect the material properties of the manufactured component based on the scan strategy used. In this study, we investigate the material characteristics of turning-style toolpath strategies to generate axisymmetric components with additive manufacturing (AM), referred to in this research as additive turning. This novel approach leverages existing CAM technology for turning, where the component rotates around a stationary cutting tool, to generate toolpath trajectories for DED with varying wall-thicknesses and controlled deposition angles. This strategy allows for entire components to be deposited in one continuous deposition, resulting in reduced cycle-time and improved material usage efficiency compared to conventional AM strategies where the beam is switched off at the end of every layer. Results from this study show that the use of additive turning can produce over 99 % dense components with less variation and anisotropy in texture and hardness, as well as a lower variation in elongation to failure when compared to conventional strategies. This research highlights that various CAM strategies could be deployed for AM to improve process efficiency or enable localized control over part performance.

36 MATERIALS SCIENCE↗
NASA NTRS1980

Stark cell optoacoustic detection of constituent gases in sample

An optoacoustic detector for gas analysis is implemented with Stark effect cell modulation for switching a beam in and out of coincidence with a spectral line of a constituent gas in order to eliminate the heating effect of laser energy in the cell as a source of background noise. By using a multiline laser, and linearly sweeping the DC bias voltage while exciting the cell with a multiline laser, it is possible to obtain a spectrum from which to determine the combinations of excited constituents and determine their concentrations in parts per million.

Margolis, J. S.↗
NASA NTRS1982

Advanced 30/20 GHz multiple-beam antennas for communications satellites

Design concepts under development utilize two separate spacecraft antenna systems, one uplink at 30 GHz and the other a downlink at 20 GHz, where each antenna provides multiple fixed and scanning beams. Two contractors completed configuration trade-off studies and breadboarding of critical technology components, and are fabricating and testing proof-of-concept (POC) models to demonstrate the technology feasibility. Technology developments required for the proposed systems are presented, along with each contractor's progress to date. The technology development areas discussed include: (1) offset Cassegrain and shaped reflector systems for narrow beams with low sidelobes and wideangle off-axis scan; (2) diplexed beam-forming networks for dual polarization, low sidelobes, and fixed and scan-beam operation; (3) fast switching networks for scanning beams; and (4) fabrication of precision feed components and large offset reflectors.

Myhre, R. W.↗
NASA NTRS1982

Advanced 30/20 GHz multiple beam antenna for future communications satellites

A multiple offset reflector system is being used to provide multiple fixed and scanning beams at 30 GHz by means of a polarization grid diplexer to separate two orthogonally polarized feed assemblies. Each feed assembly consists of multiple fixed and scanning beam feeds. The technology developments required for successful operation of this proposed system are presented. These technologies include: (1) an offset Cassegrain system for low sidelobe wide angle scan beams; (2) a diplexed beam forming network for overlapping low sidelobe beams; (3) a fast switching network for scanning beams; and (4) fabrication of precision feed components and large offset reflectors.

Chen, C. C.↗
NASA NTRS1983

Advanced 30/20 GHz multiple-beam antennas for communications satellites

Design concepts under development utilize two separate spacecraft antenna systems, one uplink at 30 GHz and the other a downlink at 20 GHz, where each antenna provides multiple fixed and scanning beams. Two contractors completed configuration trade-off studies and breadboarding of critical technology components, and are fabricating and testing proof-of-concept (POC) models to demonstrate the technology feasibility. Technology developments required for the proposed systems are presented, along with each contractor's progress to date. The technology development areas discussed include: (1) offset Cassegrain and shaped reflector systems for narrow beams with low sidelobes and wideangle off-axis scan; (2) diplexed beam-forming networks for dual polarization, low sidelobes, and fixed and scan-beam operation; (3) fast switching networks for scanning beams; and (4) fabrication of precision feed components and large offset reflectors.

Myhre, R. W.↗
NASA NTRS1994

A radio telescope for the calibration of radio sources at 32 gigahertz

A 1.5-m-diameter radio telescope has been designed, developed, and assembled to directly measure the flux density of radio sources in the 32-GHz (Ka-band) frequency band. The main goal of the design and development was to provide a system that could yield the greatest absolute accuracy yet possible with such a system. The accuracy of the measurements have a heritage that is traceable to the National Institute of Standards and Technology. At the present time, the absolute accuracy of flux density measurements provided by this telescope system, during Venus observations at nearly closest approach to Earth, is plus or minus 5 percent, with an associated precision of plus or minus 2 percent. Combining a cooled high-electron mobility transistor low-noise amplifier, twin-beam Dicke switching antenna, and accurate positioning system resulted in a state-of-the-art system at 32 GHz. This article describes the design and performance of the system as it was delivered to the Owens Valley Radio Observatory to support direct calibrations of the strongest radio sources at Ka-band.

Gatti, M. S.↗
NASA NTRS2003

Development of a safe ground to space laser propagation system for the optical communications telescope laboratory

Furthering pursuits in high bandwidth communications to future NASA deep space and neat-Earth probes, the Jet Propulsion Laboratory (JPL) is building the Optical communications Telescope Laboratory (OCTL) atop Table Mountain in Southern California. This R&D optical antenna will be used to develop optical communication strategies for future optical ground stations. Initial experiments to be conducted include propagating high-powered, Q-switched laser beams to retro-reflecting satellites. Yet laser beam propagation from the ground to space is under the cognizance of various government agencies, namely: the Occupational Safety and Health Administration (ISHA) that is responsible for protecting workforce personnel; the Federal Aviation Administration (FAA) responsible for protecting pilots and aircraft; and the Laser Clearinghouse of Space Command responsible for protecting space assets. To ensure that laser beam propagation from the OCTL and future autonomously operated ground stations comply with the guidelines of these organizations, JPL is developing a multi-tiered safety system that will meet the coordination, monitoring, and reporting functions required by the agencies. At Tier 0, laser operators will meet OSHA safety standards for protection and access to the high power lasers area will be restricted and interlocked. Tier 1, the area defined from the telescope dome out to a range of 3.4-km, will utilize long wave infrared camera sensors to alert operators of at risk aircraft in the FAA controlled airspace. Tier 2, defined to extend from 3.4-km out to the aircraft service ceiling in FAA airspace, will detect at risk aircraft by radar. Lastly, beam propagation into space, defined as Tier 3, will require coordination with the Laser Clearinghouse. A detailed description of the four tiers is presented along with the design of the integrated monitoring and beam transmission control system.

laser safety↗
NASA NTRS2008

Microwave Power Combiner/Switch Utilizing a Faraday Rotator

A proposed device for combining or switching electromagnetic beams would have three ports, would not contain any moving parts, and would be switchable among three operating states: Two of the ports would be for input; the remaining port would be for output. In one operating state, the signals at both input ports would be coupled through to the output port. In each of the other two operating states, the signal at only one input port would be coupled to the output port. The input port would be selected through choice of the operating state.

Perez, Raul↗
NASA NTRS1996

Gigabit Satellite Network for NASA's Advanced Communication Technology Satellite (ACTS)

The advanced communication technology satellite (ACTS) gigabit satellite network provides long-haul point-to-point and point-to-multipoint full-duplex SONET services over NASA's ACTS. at rates up to 622 Mbit/s (SONET OC-12), with signal quality comparable to that obtained with terrestrial fiber networks. Data multiplexing over the satellite is accomplished using time-division multiple access (TDMA) techniques coordinated with the switching and beam hopping facilities provided by ACTS. Transmissions through the satellite are protected with Reed-Solomon encoding. providing virtually error-free transmission under most weather conditions. Unique to the system are a TDMA frame structure and satellite synchronization mechanism that allow: (a) very efficient utilization of the satellite capacity: (b) over-the-satellite dosed-loop synchronization of the network in configurations with up to 64 ground stations: and (c) ground station initial acquisition without collisions with existing signalling or data traffic. The user interfaces are compatible with SONET standards, performing the function of conventional SONET multiplexers and. as such. can be: readily integrated with standard SONET fiber-based terrestrial networks. Management of the network is based upon the simple network management protocol (SNMP). and includes an over-the-satellite signalling network and backup terrestrial internet (IP-based) connectivity. A description of the ground stations is also included.

Hoder, Douglas↗
NASA NTRS1984

Spacecraft multibeam antenna system for 30/20 GHz

The major technical tasks that led to the definitions of operational and demonstration multiple beam antenna (MBA) flight systems and a proof of concept model (POC) are described. Features of the POC Model and its measured performance are presented in detail. Similar MBA's are proposed for transmitting and receiving with the POC Model representing the 20 GHz transmitting antenna. This POC MBA is a dual shaped-surface reflector system utilizing a movable free array to simulate complete CONUS coverage. The beam forming network utilizes ferrite components for switching from one beam to another. Measured results for components, subsystems and the complete MBA confirm the feasibility of the approach and also show excellent correlation with calculated values.

Roberts, T. E.↗
DOE OSTI2021

A polarization-switch effect of silicon crystals under multiple-beam diffraction geometry

On the basis of rigorous dynamical-theory calculations, a complete X-ray polarization-switch effect of silicon crystals at the exact multiple-beam diffraction condition is demonstrated in this paper. The underlying physical mechanism of this unique phenomenon can be revealed using a simple multiple-wave propagation and interference model. The constructive and destructive interference of the multiple detoured-diffraction beams along the direction of the primary diffracted beam directly leads to the complete polarization switch. This phenomenon can be realized using both synchrotron and laboratory X-ray sources at many discrete wavelengths, and used to design a novel crystal-based polarizer to achieve a 90° polarization rotation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗