Search NASA⌕ Search

SEARCH · Search NASA

Results for “BOUNDARY LAYER, LAMINAR - CALCULATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

The Effect of Compressibility on the Growth of the Laminar Boundary Layer on Low-Drag Wings and Bodies

The development of the laminar boundary layer in a compressible fluid is considered. Formulas are given for determining the boundary-layer thickness and the ratio of the boundary-layer Reynolds number to the body Reynolds number for airfoils and bodies of revolution. It i s shown that the effect of compressibility will profoundly alter the Reynolds number corresponding to the upper limit of the range of the low-drag coefficients . The available data indicate that for low-drag and high critical compressibility speed airfoils and bodies of revolution, this effect is favorable.

Allen, H. Julian↗

Laminar boundary layer on a cone near a plane of symmetry.

The three-dimensional laminar boundary layer near the planes of symmetry of a cone with either outflow or inflow is studied in supersonic and hypersonic flow. Solutions are presented for a variety of values of three parameters, namely those of cross flow, external Mach number, and wall enthalpy ratio. Also asymptotic solutions for ranges of pertinent similarity variables are developed and used in numerical analyses so as to assure exponential behavior as the similarity variables approach infinity. Of special interest in the results is the existence for outflow, i.e., for the windward plane of symmetry, of a new solution branch and for inflow of four solution branches. The physical significance of the new solutions is discussed.

Wu, P.↗

Generation and development of small-amplitude disturbances in a laminar boundary layer in the presence of an acoustic field

A low-turbulence subsonic wind tunnel was used to study the influence of acoustic disturbances on the development of small sinusoidal oscillations (Tollmien-Schlichting waves) which constitute the initial phase of turbulent transition. It is found that acoustic waves propagating opposite to the flow generate vibrations of the model (plate) in the flow. Neither the plate vibrations nor the acoustic field itself have any appreciable influence on the stability of the laminar boundary layer. The influence of an acoustic field on laminar boundary layer disturbances is limited to the generation of Tollmien-Schlichting waves at the leading-edge of the plate.

Kachanov, Y. S.↗

Gravitational effects on chemically reacting laminar boundary layer flows over a horizontal flat plate

A theoretical study of the chemically reacting laminar boundary layer flow over a horizontal flat plate with gravitationally induced buoyant force is presented. A diffusion flame sheet model was used to describe the combustion process. The effects of gravity on the purely force convection flow can be characterized by a dimensionless coordinate quantity, which is involved in the generation of the governing equations. A numerical solution of the zero and first order governing equations subject to the appropriate physical boundary conditions was obtained. It is shown that the cross stream buoyancy induced body force acts effectively to produce a streamwise pressure gradient in the fluid adjacent to the plate surface. It is concluded that buoyancy plays an important role in boundary layer diffusion flames.

Lavid, M.↗

Viscous dissipation effects on thermophoretically augmented aerosol particle transport across laminar boundary layers

The effect of viscous dissipation on mass transport across nonisothermal low-mass-loading laminar boundary layers of dusty gas is investigated theoretically by means of numerical simulations. The derivation of the model is outlined, and numerical results are presented in extensive graphs and characterized in detail. The dissipation effects are found to be significant, increasing total particle-deposition rates; the intensity of the effects depends on the ratio of wall temperature to mainstream static temperature.

Gokoglu, S. A.↗

Laminar Boundary Layer Behind a Strong Shock Moving into Air

The laminar wall boundary layer behind a strong shock advancing into stationary air has been determined. Numerical results have been obtained for shock Mach numbers up to 14 using real gas values for density and viscosity and assuming Prandtl and Lewis numbers of 0.72 and 1, respectively. The numerical results for shear and heat transfer agree, within 4 percent, with a previously presented approximate analytical expression for these quantities. A slight modification of this expression results in agreement with the numerical data to within 2.5 percent. Analytical expressions for boundary-layer thickness and displacement thickness, correct to within 4 percent for the present data, have also been obtained.

Mirels, Harold↗

Approximate method of integration of laminar boundary layer in incompressible fluid

A method is given for the approximate solution of the equations of the two-dimensional laminar boundary layer in an incompressible fluid. The method is based on the use of a system of equations of successive moments that is easily solved for simple supplementary assumptions. The solution obtained is given in closed form by simple formulas and is claimed to be no less accurate than the complicated solutions previously obtained, which were based on the use of special classes of flows.

BOUNDARY LAYER - WING SECTIONS↗

Exploratory Investigation of Laminar-boundary-layer Oscillations on a Rotating Disk

Sinusoidal waves excited by random disturbances have been observed in the laminar boundary layer of a rotating disk at Reynolds numbers in a narrow range below the Reynolds number of transition. Their frequency was found to be approximately a constant times the velocity of the disk. The velocity of the waves at the radius of 11 inches was determined and found to be 0.2 linear velocity of the disk in a downstream direction, making an angle of approximately 14 degrees with the outward drawn radius vector.

Smith, Newell H↗

Exact solutions of laminar-boundary-layer equations with constant property values for porous wall with variable temperature

Exact solution of the laminar-boundary-layer equations for wedge-type flow with constant property values are presented for transpiration-cooled surfaces with variable wall temperatures. The difference between wall and stream temperature is assumed proportional to a power of the distance from the leading edge. Solutions are given for a Prandtl number of 0.7 and ranges of pressure-gradient, cooling-air-flow, and wall-temperature-gradient parameters. Boundary-layer profiles, dimensionless boundary-layer thicknesses, and convective heat-transfer coefficients are given in both tabular and graphical form. Corresponding results for constant wall temperature and for impermeable surfaces are included for comparison purposes.

Donoughe, Patrick L↗

Accuracy and convergence of a finite element algorithm for laminar boundary layer flow

The Galerkin-weighted residuals formulation is employed to derive an implicit finite element solution algorithm for a generally non-linear initial-boundary value problem. Solution accuracy and convergence with discretization refinement are quantized in several error norms, for the non-linear parabolic partial differential equation system governing laminar boundary layer flow, using linear, quadratic and cubic functions. Richardson extrapolation is used to isolate integration truncation error in all norms, and Newton iteration is employed for all equation solutions performed in double-precision. The mathematical theory supporting accuracy and convergence concepts for linear elliptic equations appears extensible to the non-linear equations characteristic of laminar boundary layer flow.

Soliman, M. O.↗

Method for laminar boundary layer transition visualization in flight

Disclosed is a method of visualizing laminar to turbulent boundary layer transition, shock location, and laminar separation bubbles around a test surface. A liquid crystal coating is formulated using an unencapsulated liquid crystal operable in a temperature bandwidth compatible with the temperature environment around the test surface. The liquid crystal coating is applied to the test surface, which is preferably pretreated by painting with a flat, black paint to achieve a deep matte coating, after which the surface is subjected to a liquid or gas flow. Color change in the liquid crystal coating is produced in response to differences in relative shear stress within the boundary layer around the test surface. The novelty of this invention resides in the use of liquid crystals which are sensitive to shear stress to show aerodynamic phenomena such as a boundary layer transition, shock location, and laminar separation bubbles around a test surface.

Bruce J Holmes↗

The response of a laminar boundary layer in supersonic flow to small amplitude progressive waves

The effect of a small amplitude progressive wave on the laminar boundary layer on a semi-infinite flat plate, due to a uniform supersonic freestream flow, is considered. The perturbation to the flow divides into two streamwise zones. In the first, relatively close to the leading edge of the plate, on a transverse scale comparable to the boundary layer thickness, the perturbation flow is described by a form of the unsteady linearized compressible boundary layer equations. In the freestream, this component of flow is governed by the wave equation, the solution of which provides the outer velocity conditions for the boundary layer. This system is solved numerically, and also the asymptotic structure in the far downstream limit is studied. This reveals a breakdown and a subsequent second streamwise zone, where the flow disturbance is predominantly inviscid. The two zones are shown to match in a proper asymptotic sense.

Duck, Peter W.↗