Search NASA⌕ Search

SEARCH · Search NASA

Results for “BRILLOUIN EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

70 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Electronic coherence evolution at the nearly commensurate-incommensurate CDW boundary of 1⁢T−TaS 2

Transition-metal dichalcogenides host a variety of charge-density-wave phases that couple lattice, charge, and correlation effects. In 1⁢𝑇−TaS 2 , the commensurate and nearly commensurate states are well characterized, yet the transition near 350 K into the incommensurate phase has lacked direct momentum-resolved insight. In this work, we use temperature-dependent angle-resolved photoemission spectroscopy to track the electronic structure across this transition. We observe a suppression of quasiparticle spectral weight at the Brillouin-zone center, coincident with the transport anomaly, but without clear evidence of a full band-gap opening. The transition appears to involve momentum-dependent redistribution of spectral weight, consistent with a loss of coherence that reshapes the Fermi surface while leaving conduction dispersions largely intact. These results suggest that the nearly commensurate–incommensurate transition may not align with a conventional metal-insulator transition picture, but rather as an electronic reconstruction driven by loss of coherence. Our work provides new microscopic insight into the resistivity anomaly near room temperature and may guide design principles for collective electronic switching in transition-metal dichalcogenides.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Evidence of Dirac Quantum Spin Liquid in YbZn 2⁢ GaO 5

The emergence of a quantum spin liquid (QSL), a state of matter that can result when electron spins are highly correlated but do not become ordered, has been the subject of a considerable body of research in condensed matter physics [1,2]. Spin liquid states have been proposed as hosts for high-temperature superconductivity [3] and can host topological properties with potential applications in quantum information science [4]. The excitations of most quantum spin liquids are not conventional spin waves but rather quasiparticles known as spinons, whose existence is well established experimentally only in one-dimensional systems; the unambiguous experimental realization of QSL behavior in higher dimensions remains challenging. Here, in this work, we investigate the novel compound $YbZn_{2}GaO_{5}$, which hosts an ideal triangular lattice of effective spin-1/2 moments with no detectable inherent chemical disorder. Thermodynamic and inelastic neutron scattering measurements performed on high-quality single crystal samples of $YbZn_{2}GaO_{5}$ exclude the possibility of long-range magnetic ordering down to 0.06 K, demonstrate a quadratic power law for the specific heat and reveal a continuum of magnetic excitations in parts of the Brillouin zone. Both low-temperature thermodynamics and inelastic neutron scattering spectra suggest that $YbZn_{2}GaO_{5}$ is a U(1) Dirac QSL with spinon excitations concentrated at certain points in the Brillouin zone. We advanced these results by performing additional specific heat measurements under finite fields, further confirming the theoretical expectations for a Dirac QSL on the triangular lattice of $YbZn_{2}GaO_{5}$.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1994

Transport theory and the WKB approximation for interplanetary MHD fluctuations

An alternative approach, based on a multiple scale analysis, is presented in order to reconcile the traditional Wentzel-Kramer-Brillouin (WKB) approach to the modeling of interplanetary fluctuations in a mildly inhomogeneous large-scale flow with a more recently developed transport theory. This enables us to compare directly, at a formal level, the inherent structure of the two models. In the case of noninteracting, incompressible (Alven) waves, the principle difference between the two models is the presence of leading-order couplings (called 'mixing effects') in the non-WKB turbulence model which are absent in a WKB development. Within the context of linearized MHD, two cases have been identified for which the leading order non-WJB 'mixing term' does not vanish at zero wavelength. For these cases the WKB expansion is divergent, whereas the multiple-scale theory is well behaved. We have thus established that the WKB results are contained within the multiple-scale theory, but leading order mixing effects, which are likely to have important observational consequences, can never be recovered in the WKB style expansion. Properties of the higher-order terms in each expansion are also discussed, leading to the conclusion that the non-WKB hierarchy may be applicable even when the scale separation parameter is not small.

Matthaeus, William H.↗
DOE OSTI2025

Pilot-Scale Validation of Distributed Optical Fiber Sensors for Underground Pipeline Monitoring

Distributed fiber optic sensing is a cutting-edge technology that has found extensive applications in the monitoring of Ensuring the safety, integrity, and operational efficiency of underground product pipelines is vital for maintaining the nation’s critical infrastructure. Monitoring parameters such as hoop strain, pressure, and acoustic vibrations is key to detecting potential leaks, intrusions, or structural issues. Distributed optical fiber sensor (DOFS) systems provide a compelling solution for continuous, real-time monitoring over long distances. This paper details the development and pilot-scale implementation of DOFS systems for underground pipeline monitoring, evolving from a proof-of-concept stage. Multiple custom-designed DOFS interrogator units—such as optical frequency-domain reflectometry (OFDR), Brillouin optical time-domain analysis (BOTDA), and multimodal interferometer-based fiber acoustic sensors—were employed to measure key parameters like hoop strain, pressure, and acoustic vibrations. The underground product pipeline's outer diameter is 30 inches, the wall thickness is 1.28 inches, and the 3-foot depth. The fiber deployment strategies, and sensing data acquisition methods for these systems are discussed. The results demonstrate the effectiveness of DOFS in detecting hoop strain, temperature changes, and acoustic vibrations, showcasing their potential for real-time monitoring and enhancing pipeline safety.

distributed fiber sensing↗
DOE OSTI2024

Advances in laser-based bremsstrahlung x-ray sources. I. Optimizing laser-accelerated electrons

In this work, we have performed a suite of kinetic simulations of relativistic laser–plasma interaction under settings relevant to recent and planned experiments on a variety of laser systems. The goal of the study is to illuminate the physics of laser–target coupling and to provide guidance for how to optimize these sources for applications. It is shown that the production of relativistic electrons is maximized when conditions of relativistic induced transparency (RIT) in dense plasmas can be achieved over a large interaction volume at the time of arrival of most intense part of the laser pulse. RIT is shown to enhance both the numbers of relativistic electrons and the energies of the electrons, leading to an increased x-ray dose. A variety of approaches to enhancing laser–target coupling are considered. These include optimizing the effects of low-density pre-plasma (arising either from finite laser pedestal or from the use of foam coatings) and of modifying the laser focusing geometry to reduce effects of filamentation and self-focusing. Evidence of a novel approach to achieving stable laser propagation over distances of tens of micrometers in a plasma gradient is also presented. These conditions coincide with plasma and laser conditions explored in recent experiments on the Omega EP laser system and compare favorably with an analytic criterion for stable laser propagation in relativistically underdense plasma obtained from a nonlinear Wentzel–Kramers–Brillouin analysis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1982

Approximate constants of motion for classically chaotic vibrational dynamics - Vague tori, semiclassical quantization, and classical intramolecular energy flow

Substantial short time regularity, even in the chaotic regions of phase space, is found for what is seen as a large class of systems. This regularity manifests itself through the behavior of approximate constants of motion calculated by Pade summation of the Birkhoff-Gustavson normal form expansion; it is attributed to remnants of destroyed invariant tori in phase space. The remnant torus-like manifold structures are used to justify Einstein-Brillouin-Keller semiclassical quantization procedures for obtaining quantum energy levels, even in the absence of complete tori. They also provide a theoretical basis for the calculation of rate constants for intramolecular mode-mode energy transfer. These results are illustrated by means of a thorough analysis of the Henon-Heiles oscillator problem. Possible generality of the analysis is demonstrated by brief consideration of classical dynamics for the Barbanis Hamiltonian, Zeeman effect in hydrogen and recent results of Wolf and Hase (1980) for the H-C-C fragment.

Shirts, R. B.↗
NASA NTRS1996

Robust, Brillouin Active Embedded Fiber-Is-The-Sensor System in Smart Composite Structures

Extensive review of our proposed sensing scheme, based mainly on the forward Guided Acoustic Wave Brillouin Scattering (GAWBS) with backward stimulated Brillouin scattering (sBs) as an auxiliary scheme for system fault tolerance has been completed during this project period. This preliminary study is conducted for a number of reasons. The most significant reasons lie in the essential capability of the system to measure temperature and pressure. These two measurands have been proposed to be sensed by sBs in our proposal. Temperature and pressure/strain are important measurands in structural monitoring, so that the effectiveness of sensing by sBs needs to be further examined. It has been pointed out initially that sBs shift will be dependent on temperature and pressure/strain simultaneously. The shift versus temperature or strain is linear. Now, the question is how can these two measurands be separated when sBs is used to sense an environment, in which both temperature and strain are changing simultaneously. Typical sBs shift plotted versus strain and varying temperature is shown in Fig. 1. As is clear, a fiber initially stressed will relax with rising temperature. This is verified by a displacement to the right with rising temperature of the sBs shift vs strain curves in the figure. A way to circumvent this ambiguity is by employing two fibers, one pre-stressed and the other is a free fiber. The latter will measure temperature and subtracting data in the latter fiber from those of the former will give us net strain readings. This is a laborious approach, since it involves the use of two identical fibers, and this is hard to accomplish, especially when many sensors are needed. Additional multiplexing of the data stream for data subtraction becomes a necessity.

Yu, Chung↗
DOE OSTI2024

Quantum-Confined Lifshitz Transition on Weyl Semimetal T d -MoTe 2

Adsorption of alkali atoms onto material surfaces is widely utilized for controlling electronic properties and is particularly effective for two-dimensional materials. While tuning the chemical potential and band gap and creating quantum-confined states are well established for alkali adsorption on semiconductors, the effects on semimetallic systems remain largely elusive. Here, utilizing angle-resolved photoemission spectroscopy measurements and density functional theory calculations, we disclose the creation of two-dimensional electron gas and the quantum-confined Lifshitz transition at the surface of a Weyl semimetal T d -MoTe 2 by potassium adsorption. Electrons from potassium adatoms are shown to be transferred mainly to the lowest unoccupied band within the gapped part of the Brillouin zone, which, in turn, induces strong surface band bending and quantum confinement in the topmost layer. The quantum-confined topmost layer evolves from a semimetal to a strong metal with a Lifshitz transition departing substantially from the bulk band. The present finding and its underlying mechanism can be exploited for the creation of electronic heterojunctions in van der Waals semimetals.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electrical transport and torque magnetometry studies of the kagome compound LuV 6 ⁢Sn 6 under high magnetic fields

We present a comprehensive investigation of the kagome metal LuV 6 ⁢Sn 6 through magnetotransport and torque magnetometry studies in magnetic fields up to 41 T and temperatures as low as 0.3 K. Magnetoresistance measurements up to 31 T reveal clear Shubnikov–de Haas (SdH) oscillations with two dominant frequency peaks: 𝐹 𝛼 =12 T and 𝐹 𝛽 =155 T. The Berry phase Φ 𝐁 , calculated from Landau level fan diagrams, indicates a nontrivial topology for both the 𝛼- and 𝛽-orbits. To explore the possibility of higher-frequency signals in LuV 6 ⁢Sn 6 , we employed another technique: torque magnetometry. Torque measured with applied fields up to 41 T reveals clear de Haas–van Alphen (dHvA) oscillations, with frequency signals as high as 10 kT. Angular and temperature-dependent quantum oscillation measurements allowed us to extract the effective mass of charge carriers and map the Fermi surface of LuV 6 ⁢Sn 6 . To complement the experimental findings, we performed electronic band structure and Fermi surface calculations. The electronic bands of LuV 6 ⁢Sn 6 reveal intriguing features, including flat bands, van Hove singularities, and Dirac points near the Fermi level. Two bands cross the Fermi level, contributing a deformed cylindrical shape at the Γ-point and small chainlike Fermi surfaces near the Brillouin zone boundaries. Theoretical quantum oscillation frequencies derived from Fermi surface cross-sectional areas align well with experimental SdH and dHvA results. These combined experimental and theoretical insights provide a deeper understanding of the electronic structure of LuV 6 ⁢Sn 6 and establish the foundation for exploring electronic properties in other vanadium- and titanium-based kagome systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Pilot-Scale Validation of Distributed Optical Fiber Sensors for Underground Pipeline Monitoring

Monitoring parameters such as hoop strain, pressure, and acoustic vibrations is key to detecting potential leaks, intrusions, or structural issues. Distributed optical fiber sensor (DOFS) systems provide a compelling solution for continuous, real-time monitoring over long distances. This paper details the development and pilot-scale implementation of DOFS systems for underground pipeline monitoring, evolving from a proof-of-concept stage. Multiple custom-designed DOFS interrogator units—such as optical frequency-domain reflectometry (OFDR), Brillouin optical time-domain analysis (BOTDA), and multimodal interferometer-based fiber acoustic sensor systems were tested to measure the key parameters, such as hoop strain, pipe pressure, surrounding soil temperature, and acoustic vibrations. The underground product pipeline’s outer diameter is 30 inches, the wall thickness is 1.28 inches, and 3 feet deep from the surface. The fiber deployment strategies and sensing data acquisition methods for these systems are discussed. The results demonstrate the effectiveness of DOFS in detecting hoop strain, temperature changes, and acoustic vibrations, showcasing their potential for real-time monitoring and enhancing pipeline safety. These findings from pilot-scale testing offer valuable insights into advancing pipeline monitoring technologies and improving the reliability of underground pipeline systems.

fiber optic sensors↗
DOE OSTI2024

Tunneling magnetoresistance in MgO tunnel junctions with Fe-based leads in empirically corrected density functional theory

The minority-spin Fe/MgO interface states are at the Fermi level in density functional theory (DFT), but experimental evidence and GW calculations place them slightly higher in energy. This small shift can strongly influence tunneling magnetoresistance (TMR) in junctions with a thin MgO barrier and its dependence on the concentration of Co in the electrodes. Here, in this study, an empirical potential correction to DFT is introduced to shift the interface states up to match the tunnel spectroscopy data. With this shift, TMR in Fe/MgO/Fe junctions exceeds 800% and 3000% at 3 and 4 monolayers (ML) of MgO, respectively. We further consider the effect of alloying of the Fe electrodes with up to 30% Co or 10% V, treating them in the coherent potential approximation (CPA). Alloying with Co broadens the interface states and brings a large incoherent minority-spin spectral weight to the Fermi level. Alloying with V brings the minority-spin resonant states close to the Fermi level. However, in both cases the minority-spin spectral weight at the Fermi level resides primarily at the periphery of the Brillouin zone, which is favorable for spin filtering. Using convolutions of k II -resolved barrier densities of states calculated in CPA, it is found that TMR is strongly reduced by alloying with Co or V but still remains above 500% at 4 ML of MgO up to 30% of Co or 5% V. At 5 ML, the TMR increases above 1000% in all systems considered. However, while TMR declines sharply with increasing bias up to 0.2 eV in the tunnel junctions with pure Fe leads, it remains almost constant up to 0.5 eV if leads are alloyed with Co.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1986

Theoretical Study of the Transverse Dielectric Constant of Superlattices and Their Alloys

The optical properties of III to V binary and ternary compounds and GaAs-Al(x)Ga(1-x)As superlattices are determined by calculating the real and imaginary parts of the transverse dielectric constant. Emphasis is given to determining the influence of different material and superlattice parameters on the values of the index of refraction and absorption coefficient. In order to calculate the optical properties of a material, it is necessary to compute its electronic band structure. This was accomplished by introducing a partition band structure approach based on a combination of the vector k x vector p and nonlocal pseudopotential techniques. The advantages of this approach are that it is accurate, computationally fast, analytical, and flexible. These last two properties enable incorporation of additional effects into the model, such as disorder scattering, which occurs for alloy materials and excitons. Furthermore, the model is easily extended to more complex structures, for example multiple quantum wells and superlattices. The results for the transverse dielectric constant and absorption coefficient of bulk III to V compounds compare well with other one-electron band structure models and the calculations show that for small frequencies, the index of refraction is determined mainly by the contibution of the outer regions of the Brillouin zone.

Kahen, K. B.↗
DOE OSTI2025

Distributed Fiber Optic Sensing for in-well hydraulic fracture monitoring

This study presents the results from in-well hydraulic fracture monitoring within a horizontal well in an unconventional reservoir utilizing Distributed Fiber Optic Sensing (DFOS). An in-house-developed Brillouin-based Distributed Strain Sensing (DSS) interrogator was deployed to obtain strain measurements, complemented by a commercial Raman-based Distributed Temperature Sensing (DTS) interrogator for temperature measurements and a commercial Rayleigh-based Low-Frequency Distributed Acoustic Sensing (LF-DAS) interrogator for strain-rate measurements. Examined over a ten-day period, the spatio-temporal distribution of temperature-compensated strain obtained from DSS and DTS revealed distinct signatures of the multi-stage hydraulic fracturing process. These signatures were analyzed with respect to fracture width growth and closure, residual strain effects, and fracture conductivity near the wellbore. Fracture widths within the fracture zone were estimated for individual stages. The findings were assessed with LF-DAS measurements for further evaluation. This work integrates DFOS-measured strain, temperature, and strain-rate data for monitoring in-well hydraulic fracturing, with the goal of supporting future studies in interpreting DFOS measurements for improved understanding of hydraulic fracturing in unconventional reservoirs.

58 GEOSCIENCES↗
DOE OSTI2026

Laser polarization effects on crossed-beam energy transfer in inertial confinement fusion

Crossed-beam energy transfer (CBET) is a consequential process in inertial confinement fusion (ICF) experiments. CBET depends on the polarization state of the interacting lasers and can, in turn, alter their polarization. Here, we derive analytical expressions for two-beam CBET with linearly and circularly polarized light, and present simulations of CBET that include polarization effects for ICF conditions relevant to experiments on the National Ignition Facility. The results show that CBET mixes the polarization of the beams as they propagate through the target and leads to azimuthal power imbalances between beams within a given cone (i.e., at the same polar angle in the target chamber). These variations are shown to correlate with variations in measured backscatter between beams of a same quadruplet. Using circularly polarized, instead of linearly polarized, light produces similar overall levels of CBET within a cone of beams but tends to reduce the azimuthal variations. This is expected to slightly improve irradiation symmetry and reduce the risk of backscatter from stimulated Brillouin scattering. Circular polarization may therefore be beneficial for the next generation of laser fusion drivers.

Physics - Plasma physics↗
DOE OSTI2025

New interpretation of ion cyclotron emission from a tokamak

The tempting interpretation of ion cyclotron emission in terms of compressional Alfvén eigenmodes involving energetic ions is inconsistent with recent TCV experimental observations in some important aspects, such as (i) the perturbed poloidal field is exceeding the parallel perturbed magnetic field significantly, and (ii) the modes are near cyclotron harmonic and exhibit Alfvèn scaling of their frequency. We show that these characteristics can be explained by considering finite Larmor radius effects of thermal ions in shear Alfvén waves that allow such waves to exist well above the ion cyclotron frequency in the form of wave-packets bouncing within the plasma volume.

Plasma waves↗
DOE OSTI2025

Seedless nonresonant gas-flow velocimetry with single-shot coherent Rayleigh-Brillouin scattering

We demonstrate neutral gas-flow velocimetry by exploiting the optical dipole forces exerted by precisely tailored high-intensity laser fields on polarizable particles, in the form of single-shot coherent Rayleigh-Brillouin scattering (CRBS). This enables mapping of the velocity distribution function of the particles in a single laser shot of approximately 200 ns duration, allowing us to perform spectroscopic measurements in the time, rather than the frequency, domain. Importantly, CRBS results in a coherent signal beam, which renders the technique ideal for measurements in optically noisy environments. By correlating the time shift of the resulting spectrum to the Doppler shift caused by the bulk motion of particles, we perform neutral gas-flow velocimetry without the need to seed the flow, nondestructively, for a variety of gases, atomic or molecular. We demonstrate gas-flow velocimetry at flow velocities as low as 1 m ⁢s −1 , with similar velocity resolution, while temperature and gas density can also be estimated from the same single-shot spectra. To prove the effectiveness of the measurement technique, we benchmark it against Pitot tube measurements, which show excellent agreement.

Gerakis, Alexandros [Luxembourg Institute of Scien↗