Search NASA⌕ Search

SEARCH · Search NASA

Results for “Back-Gate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

66 records · Page 4

Quantitative measurements of nanoscale permittivity and conductivity using tuning-fork-based microwave impedance microscopy

Here, we report quantitative measurements of nanoscale permittivity and conductivity using tuning-fork (TF) based microwave impedance microscopy (MIM). The system is operated under the driving amplitude modulation mode, which ensures satisfactory feedback stability on samples with rough surfaces. The demodulated MIM signals on a series of bulk dielectrics are in good agreement with results simulated by finite-element analysis. Using the TF-MIM, we have visualized the evolution of nanoscale conductance on back-gated MoS 2 field effect transistors, and the results are consistent with the transport data. Our work suggests that quantitative analysis of mesoscopic electrical properties can be achieved by near-field microwave imaging with small distance modulation.

36 MATERIALS SCIENCE↗

Direct observation of negative differential resistance in WS2 homojunction

Vertical tunneling junctions showing negative differential resistance (NDR) are realized in WS2 homojunction devices. Mono-/multilayered single crystalline WS2 is grown using chemical vapor deposition. NDR is observed through resonant tunneling in Au/bi-layer WS2/Au and Pt/few-layered WS2/Au tunneling junctions by back-gating at room temperature. While two-dimensional materials have been a central focus of materials research during the past decade, exploiting novel properties in diverse layers of these materials is emerging with new designs for electronic devices. Our results pave the way for novel resonant tunneling devices presenting a route to fabricate homojunction WS2 with simple fabrication techniques.

Hsu, Bo (ORCID:0000000201714211)↗

Remote surface optical phonon scattering in ferroelectric Ba 0.6 Sr 0.4 TiO 3 gated graphene

We report the effect of remote surface optical (RSO) phonon scattering on carrier mobility in monolayer graphene gated by ferroelectric oxide. We fabricate monolayer graphene transistors back-gated by epitaxial (001) Ba 0.6 Sr 0.4 TiO 3 films, with field effect mobility up to 23 000 cm 2 V –1 s –1 achieved. Switching ferroelectric polarization induces nonvolatile modulation of resistance and quantum Hall effect in graphene at low temperatures. Ellipsometry spectroscopy studies reveal four pairs of optical phonon modes in Ba 0.6 Sr 0.4 TiO 3 , from which we extract RSO phonon frequencies. The temperature dependence of resistivity in graphene can be well accounted for by considering the scattering from the intrinsic longitudinal acoustic phonon and the RSO phonon, with the latter dominated by the mode at 35.8 meV. Furthermore, our study reveals the room temperature mobility limit of ferroelectric-gated graphene transistors imposed by RSO phonon scattering.

36 MATERIALS SCIENCE↗

Influence of surface adsorption on MoS 2 memtransistor switching kinetics

Sulfur-deficient polycrystalline two-dimensional (2D) molybdenum disulfide (MoS 2 ) memtransistors exhibit gate-tunable memristive switching to implement emerging memory operations and neuromorphic computing paradigms. Grain boundaries and sulfur vacancies are critical for memristive switching; however, the underlying physical mechanisms are not fully understood. Furthermore, the adsorption of water and gaseous species strongly perturbs electronic transport in monolayer MoS 2 , and little work has been done to explore the influence of surface interactions on defect-related kinetics that produces memristive switching. Here, we study the switching kinetics of back-gated MoS 2 memtransistors using current transient measurements in a controlled atmosphere chamber. Here, we observe that adsorbed water molecules lead to suppression of the electronic trap-filling processes concomitant with the resistive switching process, resulting in altered kinetics of the resistive switching. Additionally, using the transient response from “bunched” drain voltage pulse trains performed as a function of temperature, we extract the energy of the affected trap state and find that it places the trap roughly midgap [E T = E C – 0.7 (±0.4) eV]. Our results highlight the importance of controlling for surface interactions that may affect switching kinetics in 2D memtransistors, synaptic transistors, and related memory devices.

36 MATERIALS SCIENCE↗

Electronic Transport in Hydrogen-Terminated Si(001) Nanomembranes

Charge carrier transport in thin hydrogen (H)-terminated Si(001) sheets is explored via a four-probe device fabricated on silicon-on-insulator (SOI) using the bulk host Si as a back gate. The method enables electrical measurements without the need to contact the sample surface proper. Furthermore, sheet conductance measurements as a function of back-gate voltage demonstrate the presence of acceptor- and donorlike surface states. These states are distributed throughout the gap and can be removed or transformed with low-temperature annealing. The density of donorlike states is just under 10 12 cm -2 eV -1 and 3 times higher than that of the acceptorlike states. We discuss the possible origins of these states. The conductance through the surface layer is too small to measure.

2-dimensional systems↗

Electron and hole gas in modulation-doped GaAs/Al{sub 1-x}Ga{sub x}As radial heterojunctions

We perform self-consistent Schroedinger-Poisson calculations with exchange and correlation corrections to determine the electron and hole gas in a radial heterojunction formed in a GaAs/AlGaAs core-multi-shell nanowire, which is either n- or p-doped. We show that the electron and hole gases can be tuned to different localizations and symmetries inside the core as a function of the doping density/gate potential. Contrary to planar heterojunctions, conduction electrons do not form a uniform 2D electron gas (2DEG) localized at the GaAs/AlGaAs interface, but rather show a transition between an isotropic, cylindrical distribution deep in the GaAs core (low doping) and a set of six tunnel-coupled quasi-1D channels at the edges of the interface (high doping). Holes, on the other hand, are much more localized at the GaAs/AlGaAs interface. At low doping, they present an additional localization pattern with six separated 2DEGs strips. The field generated by a back-gate may easily deform the electron or hole gas, breaking the sixfold symmetry. Single 2DEGs at one interface or multiple quasi-1D channels are shown to form as a function of voltage intensity, polarity, and carrier type.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ferroelectric-Domain-Patterning-Controlled Schottky Junction State in Monolayer MoS 2

Here, we exploit scanning probe controlled domain patterning in a ferroelectric top-layer to induce nonvolatile modulation of the conduction characteristic of monolayer MoS 2 between a transistor and a junction state. In the presence of a domain wall, MoS 2 exhibits rectified I-V that is well described by the thermionic emission model. The induced Schottky barrier height Φ eff Β varies from 0.38 eV to 0.57 eV and is tunabe by a SiO 2 global back-gate, while the tuning range of Φ eff Β the barrier height depends sensitively on the conduction band tail trapping states. Our work points to a new route to achieve programmable functionalities in van der Waals materials and sheds light on the critical performance limiting factors in these hybrid systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fabrication and DC/AC Characterization of 3-Terminal Ferromagnet/Silicon Spintronics Devices

CMOS and SOI technology compatible structures and devices are currently intensively investigated by many research groups, since various effects observed in such structures can be relatively easy implemented in electronic devices thereby expanding their functionality. The most promising is the research and development of spintronic devices, which will allow using both electron charge and spin degrees of freedom for transmission, storage and processing of information. In this work we report the fabrication process of 3-terminal (3-T) ferromagnet/silicon devices of two types. First is the planar Fe{sub 3}Si/Si 3-T structure with 5 μm gap between closest ferromagnetic electrodes. Second is silicon nanowire back-gate transistor with Fe film source and drain synthesized on SOI substrate. Transport and magnetotransport properties of both devices are investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microscopy of Electrostatic Field Effect in Novel Quantum Materials (Final Report)

In this DOE Early Career project “Microscopy of Electrostatic Field Effect in Novel Quantum Materials”, the PI’s group explored the nanoscale electronic properties when charge carriers are electrostatically modulated in functional materials. Using a microwave impedance microscope (MIM), the team probed the spatial evolution of local conductivity in various field-effect transistors (FETs) ranging from traditional metal-oxide-semiconductor FETs, sketched oxide-interface FETs, to ferroelectric FETs and electric double-layer transistors (EDLTs). Specifically, the work has led to a deep understanding on the electrical inhomogeneity and conductive edge channels in atomically thin transition metal dichalcogenides and their heterostructures, which is of fundamental importance for their applications in electronics and photonics. The unique sub-surface imaging capability also enables the first-time report of ferroelectric field effect on Ge substrates due to the polarization switching of an epitaxial BaTiO 3 layer, as well as the visualization of sketched nanostructures in the LaAlO 3 /SrTiO 3 interface. Using a cryogenic MIM, the local channel conductance in ion-gel-gated oxide EDLTs has been successfully imaged, resolving a major challenge in the EDLT research to study electronic fluctuations in the devices. Finally, a new tuning-fork-based MIM has been developed to perform quantitative conductivity imaging on back-gated FETs. The research supported by this DOE grant is significant for understanding the nanoscale uniformity in technologically important materials towards energy applications.

2D materials↗

Conformal High-K Dielectric Coating of Suspended Single-Walled Carbon Nanotubes by Atomic Layer Deposition

As one of the highest mobility semiconductor materials, carbon nanotubes (CNTs) have been extensively studied for use in field effect transistors (FETs). To fabricate surround-gate FETs— which offer the best switching performance—deposition of conformal, weakly-interacting dielectric layers is necessary. This is challenging due to the chemically inert surface of CNTs and a lack of nucleation sites—especially for defect-free CNTs. As a result, a technique that enables integration of uniform high-k dielectrics, while preserving the CNT’s exceptional properties is required. In this work, we show a method that enables conformal atomic layer deposition (ALD) of high-k dielectrics on defect-free CNTs. By depositing a thin Ti metal film, followed by oxidation to TiO2 under ambient conditions, a nucleation layer is formed for subsequent ALD deposition of Al2O3. The technique is easy to implement and is VLSI-compatible. We show that the ALD coatings are uniform, continuous and conformal, and Raman spectroscopy reveals that the technique does not induce defects in the CNT. The resulting bilayer TiO2/Al2O3 thin-film shows an improved dielectric constant of 21.7 and an equivalent oxide thickness of 2.7 nm. The electrical properties of back-gated and top-gated devices fabricated using this method are presented.

36 MATERIALS SCIENCE↗

Front and backside processed thin film electronic devices

This invention provides methods for fabricating thin film electronic devices with both front- and backside processing capabilities. Using these methods, high temperature processing steps may be carried out during both frontside and backside processing. The methods are well-suited for fabricating back-gate and double-gate field effect transistors, double-sided bipolar transistors and 3D integrated circuits.

Yuan, Hao-Chih↗