Energetics of MnO 2 polymorphs in density functional theory
Not Available
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
The role of exchange defects on the band structure of ZnGeN 2 is investigated. Exchange defects are defined through the exchange of cations Zn and Ge starting from the ideal Pna2 1 crystal structure, which obeys the local octet rule. Each such exchange creates several nitrogen-centered tetrahedra which violate the local octet rule, although overall charge neutrality is preserved. We study several distributions of exchange defects, some with all antisites making up the exchange defect close to each other and with increasing numbers of exchange defects, and others where the two types of antisites Zn Ge and Ge Zn are kept separated from each other. We also compare the results for these models with a fully random distribution of Zn and Ge on the cation sites. We show that for a single-nearest-neighbor exchange defect, the band gap is narrowed by about 0.5 eV due to two effects: (1) the Zn Ge antisites form filled acceptor states just above and merging with the valence-band maximum (VBM) of perfect crystal ZnGeN 2 and (2) the Ge Zn antisites form a resonance in the conduction band which lowers the conduction-band minimum (CBM). When more exchange defects are created, these acceptor states broaden into bands which can lower the gap further. When tetrahedra occur surrounded completely by four Zn atoms, states even deeper in the gap are found localized all near these tetrahedra, forming a separate intermediate band. Finally, for phase-segregated Zn Ge and Ge Zn , the gap is significantly more reduced, but no separate band is found to occur. The Zn Ge acceptorlike states now form a percolating defect band which is significantly wider and hence reaches deeper into the gap. In all cases, the wave functions near the top of the new VBM remain, to some extent, localized near the Zn Ge sites. For a fully random case, the gap is even more severely reduced by almost 3 eV. The total energy of the system increases with the number of octet-rule-violating tetrahedra and the energy cost per exchange defect of order 2 eV is quite high.
In this study, we examine the topological phases that can arise in triangular lattices with disconnected elementary band representations. We show that, although these phases may be “fragile” with respect to the addition of extra bands, their topological properties are manifest in certain nontrivial holonomies (Wilson loops) in the space of nontrivial bands. We introduce an eigenvalue index for fragile topology, and we show how a nontrivial value of this index manifests as the winding of a hexagonal Wilson loop; this remains true even in the absence of time-reversal or sixfold rotational symmetry. Additionally, when time-reversal and twofold rotational symmetry are present, we show directly that there is a protected nontrivial winding in more conventional Wilson loops. Crucially, we emphasize that these Wilson loops cannot change without closing a gap to the nontrivial bands. By studying the entanglement spectrum for the fragile bands, we comment on the relationship between fragile topology and the “obstructed atomic limit” of Bradlyn et al. [Nature (London) 547, 298 (2017)]. We conclude with some perspectives on topological matter beyond the K-theory classification.
Correlated insulators and superconductivity have been observed in “magic-angle” twisted bilayer graphene, when the nearly flat bands close to neutrality are partially filled. Here, while a momentum-space continuum model accurately describes these flat bands, interaction effects are more conveniently incorporated in tight-binding models. We have previously shown that no fully symmetric tight-binding model can be minimal, in the sense of capturing just the flat bands, so extended models are unavoidable. Here, we introduce a family of tight-binding models that capture the flat bands while simultaneously retaining all symmetries. In particular, we construct three concrete models with five, six, or ten bands per valley and per spin. These models are also faithful, in that the additional degrees of freedom represent energy bands further away from neutrality, and they serve as optimal starting points for a controlled study of interaction effects. Furthermore, our construction demonstrates the “fragile topology” of the nearly flat bands; i.e., the obstruction to constructing exponentially localized Wannier functions can be resolved when a particular set of trivial bands is added to the model.
In superconducting circuits interrupted by Josephson junctions, the dependence of the energy spectrum on offset charges on different islands is 2e periodic through the Aharonov-Casher effect and resembles a crystal band structure that reflects the symmetries of the Josephson potential. We show that higher-harmonic Josephson elements described by a cos(2φ) energy-phase relation provide an increased freedom to tailor the shape of the Josephson potential and design spectra featuring multiplets of flat bands and Dirac points in the charge Brillouin zone. Flat bands provide noise-insensitive energy levels, and consequently, engineering band pairs with flat spectral gaps can help improve the coherence of the system. We discuss a modified version of a flux qubit that achieves, in principle, no decoherence from charge noise and introduce a flux qutrit that shows a spin-1 Dirac spectrum and is simultaneously quite robust to both charge and flux noise.
Flatbands appear in many condensed matter systems, including the two-dimensional electron gas in a high magnetic field, correlated materials, and moiré heterostructures. They are characterized by intrinsic geometric properties such as the Berry curvature and Fubini-Study metric. The influence of the band geometry on electron-electron interaction is difficult to understand analytically because the geometry is in general nonuniform in momentum space. In this work, we study the topological flatband of Chern number C = 1 with a momentum-dependent but positive definite Berry curvature that fluctuates in sync with Fubini-Study metric. We derive an exact correspondence between such ideal flatbands and Landau levels and show that the band geometry fluctuation gives rise to a new type of interaction in the corresponding Landau levels that depends on the center of mass of two particles. We characterize such interactions by generalizing the usual Haldane pseudopotentials. This mapping gives exact zero-energy ground states for short-ranged repulsive generalized pseudopotentials in flatbands, in analogy to fractional quantum Hall systems. Driving the center-of-mass interactions beyond the repulsive regime leads to a dramatic reconstruction of the ground states towards gapless phases. The generalized pseudopotential could be a useful basis for future numerical studies.
When Bloch electrons in a solid are exposed to a strong optical field, they are coherently driven in their respective bands where they acquire a quantum phase as the imprint of the band shape. If an electron approaches an avoided crossing formed by two bands, it may be split by undergoing a Landau-Zener transition. We here employ subsequent Landau-Zener transitions to realize strong-field Bloch electron interferometry (SFBEI), allowing us to reveal band structure information. In particular, we measure the Fermi velocity (band slope) of graphene in the vicinity of the K points as 1.07±0.04 nm fs –1 . As a result, we expect SFBEI for band structure retrieval to apply to a wide range of material systems and experimental conditions, making it suitable for studying transient changes in band structure with femtosecond temporal resolution at ambient conditions.
Lattice deformations in graphene couple to the low-energy electronic degrees of freedom as effective scalar and gauge fields. Using molecular dynamics simulations, we show that the optical component of the displacement field, i.e., the relative motion of different sublattices, contributes at equal order as the acoustic component and effectively screens the pseudogauge fields. In particular, we consider twisted bilayer graphene and corrugated monolayer graphene. In both cases, optical lattice displacements significantly reduce the overall magnitude of the pseudomagnetic fields. For corrugated graphene, optical contributions also reshape the pseudomagnetic field and significantly modify the electronic bands near charge neutrality. Previous studies based on continuum elasticity, which ignores this effect, have therefore systematically overestimated the strength of the strain-induced pseudomagnetic field. Furthermore, our results have important consequences for the interpretation of experiments and design of straintronic applications.
We present a first principles study of the electronic and magnetic properties of epitaxial interfaces between the Heusler compounds, Ti 2 MnIn and Ni 2 MnIn, and the III-V semiconductors, InSb and InAs, respectively. We use density functional theory (DFT) with a machine-learned Hubbard U correction determined by Bayesian optimization. Here, we evaluate these interfaces for prospective applications in Majorana-based quantum computing and spintronics. In both interfaces, states from the Heusler penetrate into the gap of the semiconductor, decaying within a few atomic layers. The magnetic interactions at the interface are weak and local in space and energy. Magnetic moments of less than 0.1 µB are induced in the two atomic layers closest to the interface. The induced spin polarization around the Fermi level of the semiconductor decays within a few atomic layers. The decisive factor for the induced spin polarization around the Fermi level of the semiconductor is the spin polarization around the Fermi level in the Heusler, rather than the overall magnetic moment. As a result, the ferrimagnetic narrow-gap semiconductor Ti 2 MnIn induces a more significant spin polarization in the InSb than the ferromagnetic metal Ni 2 MnIn induces in the InAs. This is explained by the position of the transition metal d states in the Heusler with respect to the Fermi level. Based on our results, these interfaces are unlikely to be useful for Majorana devices but could be of interest for spintronics.
In this paper, the properties of photonic band gaps (PBGs) in two types of two-dimensional plasma-dielectric photonic crystals (2D PPCs) under a transverse-magnetic (TM) wave are theoretically investigated by a modified plane wave expansion (PWE) method where Monte Carlo method is introduced. The proposed PWE method can be used to calculate the band structures of 2D PPCs which possess arbitrary-shaped filler and any lattice. The efficiency and convergence of the present method are discussed by a numerical example. The configuration of 2D PPCs is the square lattices with fractal Sierpinski gasket structure whose constituents are homogeneous and isotropic. The type-1 PPCs is filled with the dielectric cylinders in the plasma background, while its complementary structure is called type-2 PPCs, in which plasma cylinders behave as the fillers in the dielectric background. The calculated results reveal that the enough accuracy and good convergence can be obtained, if the number of random sampling points of Monte Carlo method is large enough. The band structures of two types of PPCs with different fractal orders of Sierpinski gasket structure also are theoretically computed for a comparison. It is demonstrate that the PBGs in higher frequency region are more easily produced in the type-1 PPCs rather than in the type-2 PPCs. Sierpinski gasket structure introduced in the 2D PPCs leads to a larger cutoff frequency, enhances and induces more PBGs in high frequency region. The effects of configurational parameters of two types of PPCs on the PBGs are also investigated in detail. The results show that the PBGs of the PPCs can be easily manipulated by tuning those parameters. The present type-1 PPCs are more suitable to design the tunable compacted devices.
Here we present a two-step method specifically tailored for band structure calculation of the small-angle moiré-pattern materials which contain tens of thousands of atoms in a unit cell. In the first step, the self-consistent field calculation for the ground state is performed with the O(N) Krylov subspace method implemented in openmx. Second, the crystal momentum-dependent Bloch Hamiltonian and overlap matrix are constructed from the results obtained in the first step and only a small number of eigenvalues near the Fermi energy are solved with shift-invert and Lanczos techniques. By systematically tuning two key parameters, the cutoff radius for electron hopping interaction and the dimension of the Krylov subspace, we obtained the band structures for both rigid and corrugated twisted bilayer graphene structures down to the first magic angle (θ = 1.08°) with high enough accuracy at affordable costs. The band structures are in good agreement with those from tight-binding models, continuum models, plane-wave pseudopotential based ab initio calculations, and experimental observations. This method is also shown to be efficient in twisted double-bilayer graphene and bilayer WSe 2 . We think this two-step method can play a crucial role in other twisted two-dimensional materials, especially those with much more complex band structure and where the effective model is hard to construct.
Here, we have used highly accurate quantum Monte Carlo methods to determine the chemical structure and electronic band gaps of monolayer GeSe. Two-dimensional (2D) monolayer GeSe has received a great deal of attention due to its unique thermoelectric, electronic, and optoelectronic properties with a wide range of potential applications. Density functional theory (DFT) methods have usually been applied to obtain optical and structural properties of bulk and 2D GeSe. For the monolayer, DFT typically yields a larger band-gap energy than for bulk GeSe but cannot conclusively determine if the monolayer has a direct or indirect gap. Moreover, the DFT-optimized lattice parameters and atomic coordinates for monolayer GeSe depend strongly on the choice of approximation for the exchange-correlation functional, which makes the ideal structure-and its electronic properties-unclear. In order to obtain accurate lattice parameters and atomic coordinates for the monolayer, we use a surrogate Hessian-based parallel line search within diffusion Monte Carlo to fully optimize the GeSe monolayer structure. The DMC-optimized structure is different from those obtained using DFT, as are calculated band gaps. The potential energy surface has a shallow minimum at the optimal structure. This, combined with the sensitivity of the electronic structure to strain, suggests that the optical properties of monolayer GeSe are highly tunable by strain.
We computed the electronic structure, elastic moduli, vibrational properties, and Ni{sub 2}TiGa and Ni{sub 2}ScGa alloys in the cubic L2{sub 1} structure. The obtained equilibrium lattice constants of these alloys are in good agreement with available data. In cubic systems, there are three independent elastic constants, namely C{sub 11}, C{sub 12} and C{sub 44}. We calculated elastic constants in L2{sub 1} structure for Ni{sub 2}TiGa and Ni{sub 2}ScGa using the energy-strain method. The electronic band structure, total and partial density of states for these alloys were investigated within density functional theory using the plane-wave pseudopotential method implemented in Quantum-Espresso program package. From band structure, total and projected density of states, we observed metallic characters of these compounds. The electronic calculation indicate that the predominant contributions of the density of states at Fermi level come from the Ni 3d states and Sc 3d states for Ni{sub 2}TiGa, Ni 3d states and Sc 3d states for Ni{sub 2}ScGa. The computed density of states at Fermi energy are 2.22 states/eV Cell for Ni{sub 2}TiGa, 0.76 states/eV Cell for Ni{sub 2}ScGa. The vibrational properties were obtained using a linear response in the framework at the density functional perturbation theory. For the alloys, the results show that the L2{sub 1} phase is unstable since the phonon calculations have imagine modes.
Divalent metal tungstates, MWO{sub 4}, with wolframite (M=Zn and Mg) and scheelite (M=Ca and Sr) structures were prepared using a conventional solid state reaction method. Their electronic band structures were investigated by a combination of electronic band structure calculations and electrochemical measurements. From these investigations, it was found that the band structures (i.e. band positions and band gaps) of the divalent metal tungstates were significantly influenced by their crystal structural environments, such as the W-O bond length. Their photovoltaic properties were evaluated by applying to the working electrodes for dye-sensitized solar cells. The dye-sensitized solar cells employing the wolframite-structured metal tungstates (ZnWO{sub 4} and MgWO{sub 4}) exhibited better performance than those using the scheelite-structured metal tungstates (CaWO{sub 4} and SrWO{sub 4}), which was attributed to their enhanced electron transfer resulting from their appropriate band positions. - Graphical abstract: The electronic band structures of divalent metal tungstates are described from the combination of experimental results and theoretical calculations, and their electronic structure-dependent photovoltaic performances are also studied. Highlights: > MWO{sub 4} compounds with wolframite (M=Zn and Mg) and scheelite structure (M=Ca and Sr) were prepared. > Their electronic band structures were investigated by the calculations and the measurements. > Their photovoltaic properties were determined by the crystal and electronic structures.
The standard method to determine the band structure of a condensed phase material is to (1) obtain a single crystal with a well defined surface and (2) map the bands with angle resolved photoelectron spectroscopy (occupied or valence bands) and inverse photoelectron spectroscopy (unoccupied or conduction bands). Unfortunately, in the case of Pu, the single crystals of Pu are either nonexistent, very small and/or having poorly defined surfaces. Furthermore, effects such as electron correlation and a large spin-orbit splitting in the 5f states have further complicated the situation. Thus, we have embarked upon the utilization of unorthodox electron spectroscopies, to circumvent the problems caused by the absence of large single crystals of Pu with well-defined surfaces. Our approach includes the techniques of resonant photoelectron spectroscopy, x-ray absorption spectroscopy, electron energy loss spectroscopy, Fano Effect measurements, and Bremstrahlung Isochromat Spectroscopy, including the utilization of micro-focused beams to probe single-crystallite regions of polycrystalline Pu samples.
Explaining most known double perovskite electronic structures and predicting new ones using Linear Combination of Atomic Orbitals analysis.
The electronic structure, electronic charge density and linear optical properties of the metallic Li{sub 7}MnN{sub 4} compound, having cubic symmetry, are calculated using the full potential linearized augmented plane wave (FP-LAPW) method. The calculated band structure and density of states using the local density, generalized gradient and Engel–Vosko approximations, depict the metallic nature of the cubic Li{sub 7}MnN{sub 4} compound. The bands crossing the Fermi level in the calculated band structure are mainly from the Mn-d states with small support of N-p states. In addition, the Mn-d states at the Fermi level enhance the density of states, which is very useful for the electronic transport properties. The valence electronic charge density depicts strong covalent bond between Mn and two N atoms and polar covalent bond between Mn and Li atoms. The frequency dependent linear optical properties like real and imaginary part of the dielectric function, optical conductivity, reflectivity and energy loss function are calculated on the basis of the computed band structure. Both intra-band and inter-band transitions contribute to the calculated optical parameters. Using the BoltzTraP code, the thermoelectric properties like electrical and thermal conductivity, Seebeck coefficient, power coefficient and heat capacity of the Li{sub 7}MnN{sub 4} are also calculated as a function of temperature and studied.
The first-principles calculations are performed to investigate the cubic phase composite K{sub 1-x}Na{sub x}TaO{sub 3}(x=0, 0.25, 0.5, 0.75, 1), by using density functional theory (DFT) with the full potential linearized augmented plane wave (FP-LAPW) method. The energy band structures, density of states (DOS), electron density and optical properties are obtained. The results show that Na ion plays an important role in K{sub 1-x}Na{sub x}TaO{sub 3}. With the content of Na ion increasing, the changes of lattice parameters, energy gaps, bond lengths and optical properties of K{sub 1-x}Na{sub x}TaO{sub 3} are regular. Moreover, the dependence of ferroelectric photocatalysis on both optical properties and internal electronic structure are analyzed in detail. It is proposed that the doped materials are promising photocatalytic materials. - Graphical abstract: The density of states (DOS) of K{sub 1-x}Na{sub x}TaO{sub 3} (x=0.5). Highlights: Black-Right-Pointing-Pointer The first-principles calculations are performed, by using DFT with FP-LAPW method. Black-Right-Pointing-Pointer The changes of internal electronic structure and optical property of doped materials are regular. Black-Right-Pointing-Pointer The dependence of ferroelectric photocatalysis on optical properties is analyzed. Black-Right-Pointing-Pointer The dependence of ferroelectric photocatalysis on internal electronic structure is analyzed. Black-Right-Pointing-Pointer The doped materials are promising photocatalytic materials.