Search NASA⌕ Search

SEARCH · Search NASA

Results for “Bimetallic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Coordination-Induced Weakening of N–H Bonds Driven by Bimetallic Cooperativity in Zr/Co Compounds

The bond dissociation free energy (BDFE) of the element-hydrogen bonds of protic substrates have been found to decrease upon metal coordination. Herein, an early/late heterobimetallic complex is used to examine the impact on the BDFE N−H when the substrate binding site and the redox-active site are two different metals that are spatially separated. A tris- (phosphinoamide) framework is used to link a d 0 ZrIV center with an accessible substrate binding site to a coordinatively saturated redox-active Co center, which serves as an appended electron reservoir. A series of aniline, amido, and imido Zr/Co model compounds were synthesized starting from the Zr IV /Co −I aniline adduct PhH 2 N−Zr(MesNP i Pr 2 ) 3 CoCN t Bu (2). 2,4,6-tristert- butylphenoxyl radical ( t Bu 3 ArO • ) was used to abstract one or two H atoms and produce the amido and imido complexes PhHNZr( MesNP i Pr 2 ) 3 CoCN t Bu (3) and PhN≡Zr(MesNP i Pr 2 ) 3 CoCNtBu (4), respectively. Using open-circuit potential measurements, the BDFE N−H within 2 and 3 were determined to be 37 kcal/mol (2) and 55 kcal/mol (3). Cyclic voltammetry measurements were conducted to determine the Co I/0 and Co 0/−I redox potentials. The pK a s were then estimated using the Bordwell equation to provide further insight into the thermochemical aspects of the observed proton coupled electron transfer (PCET) reactions.

Bond dissociation free energy↗
DOE OSTI2026

Si–Cl Bond Activations at Ni(0) to Give Bimetallic Ni(I) μ 1,2 -Cl–SiR 1 R 2 Complexes that Undergo Selective Hydrogenolyses to R 1 R 2 SiH 2 Dihydrosilanes

Chlorosilanes are cheap and abundant raw materials as crucial building blocks in silicon chemistry, yet the metal-mediated activation and functionalization of Si–Cl bonds typically require precious metal sources due to their thermodynamic inertness. Herein, we report the stoichiometric, facile activation, and hydrogenolysis of chlorosilanes mediated by a series of low-valent NHC–Ni (NHC = N-heterocyclic carbene) complexes. Treatment of a Ni(0) complex (IPr)Ni(η 6 -toluene) (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazole-2-ylidene) with chlorosilanes (R 1 R 2 SiCl 2 , R 1 = Cl, R 2 = Cl, Me, Ph, or R 1 = R 2 = Me, Et, Ph, 4-MePh) rapidly afforded di-Ni(I) complexes with a bridging silyl ligand ([(IPr)Ni] 2 (μ-SiR 1 R 2 Cl)(μ-Cl), 1 R1,R2 ) in high yields. Use of a bulkier chlorosilane, Ph 2 SiCl 2 , allowed the isolation of the mono-Ni(II) silyl complex (IPr)Ni(SiPh 2 Cl)Cl (2 Ph ) as an intermediate generated via Si–Cl oxidative addition, which underwent comproportionation with (IPr)Ni(η 6 -toluene) to form 1 Ph,Ph in nearly quantitative yield. Interestingly, 1 R1,R2 was found to react with H 2 at room temperature to form mono- or di-hydrosilanes in moderate to high yields, and the product selectivity was found to be highly dependent on the identity of substituents on Si. In conclusion, these results demonstrate a novel example of facile Si–Cl activation and hydrogenolysis mediated by low-valent mono- and dinuclear NHC–Ni complexes under mild conditions.

Liu, Tianchang [University of California, Berkeley↗
DOE OSTI2025

Controlling Reaction Pathways of Ethylene Hydroformylation Using Isolated Bimetallic Rhodium–Cobalt Sites

Designing efficient ligand-free heterogeneous catalysts for ethylene hydroformylation to produce C 3 oxygenates is of importance for both fundamental research and practical applications, but it is often hindered by insufficient catalytic activity and selectivity. Here, this work designs isolated rhodium–cobalt (Rh–Co) sites confined within a ZSM-5 zeolite to enhance ethylene hydroformylation rates and selectivity while maintaining catalyst stability. By adjusting the Co/Al ratio in Co-ZSM-5, different sizes of Co are formed; subsequent Rh introduction produces isolated Rh 1 Co x clusters with different Rh–Co coordination numbers (CNs). In-situ characterizations and density functional theory calculations reveal that a Rh–Co CN of 3, corresponding to an isolated Rh 1 Co 3 site, provides optimal bindings to reaction intermediates and thus achieves the highest hydroformylation rates among supported Rh-based catalysts. This study demonstrates the role of coordination-tuning via a secondary metal in effectively controlling the reaction pathway over single Rh atom catalysts.

03 NATURAL GAS↗
DOE OSTI2026

The Factors Governing Metal Dependence of an Emergent Superfamily of Bimetallic Oxygenases

Metalloenzyme superfamilies are typically defined by their protein scaffolds and active sites. Owing to the high tunability of protein structures, members of a single superfamily can catalyze diverse reactions with the same metallocofactor. Some superfamilies, such as amidohydrolase-related dinuclear oxygenases (AROs), display further versatility by utilizing multiple metallocofactors. We have shown that certain AROs catalyze monooxygenation reactions with diiron, dimanganese, and/or mixed manganese−iron cofactors, but the molecular factors governing the selection of a particular cofactor remain unknown, and the extent of this superfamily in biology is unclear. Here, we report bioinformatic analyses that expand the ARO superfamily to approximately 17,000 unique UniProt sequences, far exceeding the number of previously characterized enzymes. Through the integration of structural, spectroscopic, and thermodynamic analyses of representative proteins with a bioinformatic pipeline that identifies key secondary- and tertiary-sphere residues, we can predict in silico the metal preference for the majority of reported ARO sequences. These annotations were validated via the characterization of multiple new AROs, including ones implicated in key oxidative steps of natural product biosyntheses. This study establishes the key structure−function relationships governing metal preferences in AROs and highlights their vastly underappreciated role in myriad biological processes.

Liu, Chang [University of California, Berkeley, CA↗
DOE OSTI2024

Site requirements for inhibition-free CO oxidation over silica-supported bimetallic PdCu alloys

Pd catalysts are highly active for CO oxidation but suffer from inhibition by NO at low temperatures (<150 °C). We posit that incorporation of Cu into the Pd catalyst will improve low-temperature CO oxidation activity and reduce inhibition from competitive adsorbers. To probe this hypothesis, a series of PdCu alloys with different Pd : Cu ratios were synthesized and tested in the temperature-programmed oxidation of CO in the presence and absence of NO. Incorporation of small amounts of Cu into Pd improves the reactivity, as well as the resistance to NO inhibition. Beyond this, Cu incorporation into the Pd has a detrimental effect on the activity for CO oxidation. Based on combined infrared and X-ray absorption spectroscopy studies, here we show that high activity and resistance to inhibition requires alloying of Pd and Cu and the formation of a diverse surface, while surface segregation of Cu results in poor activity and inhibition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Correlating binding energies of adsorbed CO and H on model surfaces with CO/H 2 selectivity from co-electrolysis of CO 2 and H 2 O over copper–palladium bimetallic catalysts

Binding energies of adsorbed CO and H are key descriptors governing the activity and selectivity of the co-electrolysis of CO 2 and H 2 O to produce syngas with desired CO/H 2 ratios. Palladium hydride (PdH), which forms in situ at negative overpotentials, has been identified as the active Pd phase for CO 2 reduction to syngas. Herein, binding energies of CO and H are determined using temperature programmed desorption (TPD) of CO and H 2 from Pd(111), PdH/Pd(111), and Cu/PdH/Pd(111) under ultra-high vacuum (UHV) conditions. TPD results reveal that desorption of H 2 from subsurface PdH occurs at 460 K, while desorption from surface PdH is more facile at 320 K. CO desorption temperatures shift 20 K lower on PdH/Pd(111) compared to on Pd(111). The presence of 0.7 ML Cu further increases the desorption temperature of H 2 by 30 K while simultaneously reducing CO desorption temperatures by 70 K. Density functional theory (DFT) calculations show that CO adsorption onto Pd sites is hindered on the 0.7 ML Cu/PdH/Pd(111) surface while the kinetic barrier for H 2 desorption is increased. The trends in the binding energies of CO and H on model surfaces are consistent with electrochemical measurements of CuPd powder catalysts in a membrane electrode assembly (MEA), where H 2 evolution is reduced while CO production is enhanced compared to unmodified Pd catalysts. Overall, the results from model surface studies (TPD and DFT) provide a prediction and explanation for the activity and CO/H 2 ratios observed in electrochemical experiments. This study also demonstrates that CuPd is a promising catalyst with reduced Pd-loading to produce CO-rich syngas.

36 MATERIALS SCIENCE↗
NASA NTRS1975

Inhibiting Kirkendall void growth in welded bimetallic structures

Technique employs pre-aged, void-free junction composed of parent materials. Basic process for Kirkendall void inhibition can be applied to thermionic power systems, high temperature seals, high temperature junctions between any two metals of differing melting points where Kirkendall void formation would be detrimental.

Arcella, F. G.↗
NASA NTRS1978

Adhesion of a bimetallic interface

The Hohenberg-Kohn and Kohn-Sham formalisms are used to examine binding (binding energy as a function of separation) for combinations of the simple metals Al(111), Zn(0001), Mg(0001), and Na(110) in contact. Similar metal contacts between Al, Zn, Mg, and Na are examined self-consistently in an ab initio calculation using the Kohn-Sham formalism. Crystallinity is included using the Aschroft pseudopotential via first order perturbation theory for the electron-ion interaction; and the ion-ion interaction is included exactly via a lattice sum. Binding energy was determined both in the local-density approximation and including gradient corrections to the exchange and correlation energy. Binding was found in all cases. In dissimilar metal contacts, interfacial bonding was greater than that in the weaker material predicting the possibility of metallic transfer. The nonzero position of the energy minimum in like metal contacts is explained in terms of consistency between the Ashcroft pseudopotential and the bulk charge density. Good agreement with experimental surface energies is obtained in the self-consistent calculation when nonlocal terms are included.

Ferrante, J.↗
NASA NTRS1990

A phenomenological model of coating/substrate adhesion and interfacial bimetallic peeling stress in composite mirrors

Adhesion and interfacial stress between metal films and structural composite material substrates is discussed. A theoretical and conceptual basis for selecting coating materials for composite mirror substrates is described. A phenomenological model that interrelates cohesive tensile strength of thin film coatings and interfacial peeling stresses is presented. The model serves as a basis in determining gradiated materials response and compatibility of composite substrate and coating combinations. Parametric evaluation of material properties and geometrical factors such as coating thickness are used to determine the threshold stress levels for maintaining adhesion at the different interfaces.

Mcelroy, Paul M.↗
NASA NTRS1991

Theoretical modelling of AFM for bimetallic tip-substrate interactions

Recently, a new technique for calculating the defect energetics of alloys based on Equivalent Crystal Theory was developed. This new technique successfully predicts the bulk properties for binary alloys as well as segregation energies in the dilute limit. The authors apply this limit for the calculation of energy and force as a function of separation of an atomic force microscope (AFM) tip and substrate. The study was done for different combinations of tip and sample materials. The validity of the universality discovered for the same metal interfaces is examined for the case of different metal interactions.

Bozzolo, Guillermo↗
NASA NTRS2006

Bimetallic Treatment System (BTS) for Removal and Remediation of Polychlorinated Biphenyl from Marshall Space Flight Center's 4696 Fl Stand

This Office of Space Flight (OSF)-funded project sought to demonstrate the application of a Bi-metallic Treatment System (BTS) to remove and degrade PCBs found on NASA facilities. The project initiated with the collection of PCB-containing materials from various MSFC and KSC structures, followed by laboratory evaluation of the BTS' PCB-removal efficiency, and concluded with a field demonstration at MSFC. The project evaluated the optimum formulation required to remove PCBs from aged and weathered paint with the goal of achieving final PCB concentrations less than 50 mg/Kg or 50 percent reduction where PCB starting levels were already below the 50 mg/Kg levels. Using lessons learned from this study, it was anticipated that the research team would be better able to make further recommendation on application strategies for future use of BTS for the treatment of PCB laden coatings on structures.

Quinn, Jacqueline↗