Search NASA⌕ Search

SEARCH · Search NASA

Results for “Bipyridine”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Reductive Dynamic and Static Excited State Quenching of a Homoleptic Ruthenium Complex Bearing Aldehyde Groups

A new homoleptic Ru polypyridyl complex bearing two aldehyde groups on each bipyridine ligand, [Ru(dab) 3 ](PF 6 ) 2 , where dab is 4,4′-dicarbaldehyde-2,2′-bipyridine, was synthesized, characterized, and utilized for iodide photo-oxidation studies. In acetonitrile (CH 3 CN) solution, the complex displayed an intense metal-to-ligand charge transfer (MLCT) absorbance maximum at 475 nm (ε = 22,000 M –1 cm –1 ) and an infrared (IR) band at 1712 cm –1 assigned to the pendent aldehyde groups. Visible light excitation in air-saturated solution resulted in room temperature photoluminescence (PL) with a maximum at 675 nm, a quantum yield, ϕ PL = 0.048, and an excited state lifetime, τ ο = 440 ns, from which radiative and nonradiative relaxation rate constants were extracted, k r = 9.1 × 10 4 s –1 and knr = 1.8 × 10 6 s –1 . Pulsed visible light excitation yielded transient UV–vis and IR absorption spectra consistent with an MLCT excited state; relaxation occurred with the maintenance of two isosbestic points in the visible region, and a lifetime that agreed with that measured by time-resolved PL. Cyclic voltammetry studies in a CH 3 CN solution with 0.1 M TBAPF 6 electrolyte revealed a quasi-reversible oxidation, E°(Ru III/II ) = +1.25 V vs. Fc +/0 , and three sequential one-electron reductions at −1.10, −1.25, and −1.54 V vs. Fc +/0 . Here, an excited state reduction potential of E°(Ru *2+/+ ) = +0.89 V vs. Fc +/0 was estimated with the Rehm–Weller expression. Titration of tetrabutylammonium iodide, TBAI, into a CD 3 CN solution of [Ru(dab) 3 ](PF 6 ) 2 resulted in significant shifts in the aldehyde H atom and 3,3′-biypridyl resonances that were analyzed with a 1:1 equilibrium model, from which K eq = 460 M –1 was extracted, increasing to 5800 M –1 when the solvent was changed to acetone-d 6 . Iodide titrations resulted in a significant quenching of the [Ru(dab) 3 ] *2+ lifetime and quantum yield in both CH 3 CN and acetone solvents. In CH 3 CN, the quenching was mainly dynamic and well described by the Stern–Volmer model, from which a quenching rate constant, k q , of 4.5 × 10 10 M –1 s –1 and an equilibrium constant, K eq , of 8.3 × 10 3 M –1 were obtained. In acetone, the static quenching pathway by iodide was greatly enhanced, with a K eq of 1.2 × 10 4 M –1 and a higher k q of 9.2 × 10 10 M –1 s –1 .

Aldehydes↗
DOE OSTI2021

Modulating the Electron Affinity of Small Bipyridyl Molecules on Single Gold Nanoparticles for Plasmon-Driven Electron Transfer

Developing controlled platforms for plasmon-driven chemistry is of great importance in catalytic reactions at the nanoscale. We report anion radical formation for five bipyridyl complexes of varying degrees of electron affinity utilizing optically fo-cused intraband (594 nm) and interband (532 nm) pump excitation of single gold nanoparticles. The surface-enhanced Raman scattering (SERS) of anion radicals for the five non-resonant adsorbed molecules 2,2’-bipyridine (22BPY), 4,4’-bipyridine (44BPY), trans-1,2-bis(4-pyridyl)ethylene (BPE), 1,2-bis(4-pyridyl)acetylene (BPA), and 1,2-bis(4-pyridyl)ethane (BPEt) were detected using localized surface-plasmon resonance (LSPR) excitation with 785 nm. The electron affinity of the five bipyridyl complexes were determined using electrochemistry. Molecules with low electron affinity experienced high-er instances of radical anion formation under a plasmon-coupled intraband electron transfer excitation (594 nm) whereas molecules with high electron affinity showed a preference for anion radical formation under direct interband electron trans-fer excitation (532 nm). The lowest unoccupied molecular orbital (LUMO) energy levels for low electron affinity surface-bound molecules (22BPY, BPEt) are on average ~0.43 eV higher for high electron affinity surface-bound molecules (BPA, BPE, 44BPY) as calculated using time-dependent density functional theory, elucidating the importance of plasmon coupling to energy levels that facilitate charge transfer pathways. We also show the ability to ‘activate’ high vs low electron affinity single nanoparticles with the choice of pump excitation wavelength. The findings show the complex interplay between molecular electron affinity, orbital overlap with the density of states of the plasmonic metal, and excitation energetics of the pump laser wavelength. Potential applications of this work include enhanced control over molecular scale catalysis, biosensor design, and solar energy capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Synthesis and Structural Investigation of Rigid Naphthyridine-Bis(carbene) for Trigonal Planar Coordination of Coinage Metals

Coinage metal complexes, particularly Cu(I) and Au(I), supported by N-heterocyclic carbenes are of broad interest in organometallic synthesis, catalysis, and luminescent materials. The d 10 coinage metals can adopt varied linear, trigonal planar, and tetrahedral geometries. However, two-coordinate, linear Cu(I) and Au(I) complexes supported by sterically demanding monodentate or chelating carbenes are generally observed. In most cases, chelating ligands generate multinuclear species with linear geometries at the corresponding Cu(I) centers rather than mononuclear complexes. In this report, we synthesized two bis(carbene) ligands anchored by a flexible bipyridine and a rigid naphthyridine backbone with tunable proximal and distal steric properties at the wingtips to examine the influence of backbone rigidity and directionality of carbene donors on the formation of trigonal planar coinage metal species. Here, the bipyridine-bis(carbene) (ImPy) 2 ligand exclusively stabilizes dinuclear chloride complexes of Cu(I) and Ag(I), whereas the naphthyridine-bis(carbene) (NBC) stabilizes mononuclear, trigonal planar chloride complexes of Cu(I) and Ag(I) and a dinuclear chloride Au(I) complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

CO Reduction to Ethylene and Cyclopropane via a Trappable Ruthenium Methylidene

Ruthenium complexes based on cis-[Ru(bpy) 2 (CO) 2 ] 2+ (bpy is 2,2′-bipyridine) can reduce CO 2 and CO to C 1 products including methanol, but access to products containing C–C bonds has been elusive. A reaction pathway to convert CO into multicarbon products ethylene and cyclopropane is presented here, along with mechanistic studies elucidating the key intermediates in C–C bond formation. The ruthenium hydroxymethyl complex [Ru(bpy′) 2 (CO)(CH 2 OH)] + (bpy′ = 5,5′-dimethyl-2,2′-bipyridine) undergoes protonolysis to generate the ethylene complex [Ru(bpy′) 2 (CO)(C 2 H 4 )] 2+ even at −80 °C, with free ethylene released upon warming to room temperature. Experimental evidence implicates a highly electrophilic methylidene complex [Ru(bpy′) 2 (CO)(CH 2 )] 2+ as the key intermediate. The methylidene was successfully trapped with nitriles and pyridine, forming adducts (ylide complexes) that each have a unique reactivity profile. With an appropriate nitrile, the adduct can be characterized at low temperature before warming generates ethylene. A more stable pyridine adduct [Ru(bpy′) 2 (CO)(CH 2 pyridine)] 2+ was crystallographically characterized. Even ethylene itself is sufficiently nucleophilic to react with the electrophilic methylidene, revealing a route from CO to the C 3 hydrocarbon cyclopropane. Furthermore, the methods for controlling the reactivity of hydroxymethyl and methylidene complexes toward C–C bond formation can inform the development of CO and CO 2 reduction catalysts.

Carbene Compounds↗
DOE OSTI2026

Ultrafast Relaxation of MLCT Excited States in Manganese Tricarbonyl Complexes: Insights from Polarization-Resolved Femtosecond X-ray Absorption Spectroscopy at the Mn and Br K-Edges

Optical absorption features that are often described as metal-to-ligand charge transfer (MLCT) bands underlie the utility of many metal coordination complexes by harnessing the energy of light to drive otherwise inaccessible chemical reactions. Excitation of these bands triggers rapid electronic dynamics that can be challenging to understand, due to complicated potential energy landscapes and highly correlated electronic and nuclear degrees of freedom in metal-containing compounds. The lowest-energy absorption bands in Mn complexes containing alpha-diimine, carbonyl, and halide ligands are particularly interesting, due to the delocalized nature of charge transfer upon excitation. Here, in this study, we report experimental ultrafast dynamics measurements for the series of compounds Mn­(CO) 3 ( R bpy)Br ( R bpy = 4,4′-disubstituted-2,2′-bipyridine; R = H, CF 3 , or NO 2 ) using polarization-resolved, femtosecond X-ray absorption spectroscopy (XAS) at both the Mn and Br K edges. The appearance of a new absorption feature in the Br pre-edge spectrum upon optical excitation reveals the instantaneous formation of an electronic hole that is partially localized on the Br atom and has a lifetime that depends on the electron withdrawing character of the R bpy ligand. For two of the complexes (R = H or CF 3 ), a large expansion of the Mn–Br distance results in a rapid redistribution of the hole and a corresponding decrease in anisotropy of the absorption feature within 50 fs, after which the absorption into the hole disappears on a time scale shorter than 300 fs. We observe a different result for the NO 2 substituted compound, for which the Mn–Br bond contracts and the absorption into the Br-centered hole persists beyond the 2 ps time scale of our measurement. The Mn pre-edge spectrum also reveals structural changes for these three complexes, but the new Mn absorption features become evident only after the nuclei respond to the initial excitation, which allows mixing of Mn 3d and 4p orbitals. The combined use of ultrafast Mn and Br K-edge spectroscopy provides unique insight into the ways in which bipyridine substitution alters the excited-state dynamics, including a very different structural response for the most strongly electron withdrawing substituent.

Otolski, Christopher J. [Univ. of Kansas, Lawrence↗
DOE OSTI2023

Haldane topological spin-1 chains in a planar metal-organic framework

Haldane topological materials contain unique antiferromagnetic chains with symmetry-protected energy gaps. Such materials have potential applications in spintronics and future quantum computers. Haldane topological solids typically consist of spin-1 chains embedded in extended three-dimensional (3D) crystal structures. Here, we demonstrate that [Ni(μ-4,4'-bipyridine)(μ-oxalate)] n (NiBO) instead adopts a two-dimensional (2D) metal-organic framework (MOF) structure of Ni 2+ spin-1 chains weakly linked by 4,4'-bipyridine. NiBO exhibits Haldane topological properties with a gap between the singlet ground state and the triplet excited state. The latter is split by weak axial and rhombic anisotropies. Several experimental probes, including single-crystal X-ray diffraction, variable-temperature powder neutron diffraction (VT-PND), VT inelastic neutron scattering (VT-INS), DC susceptibility and specific heat measurements, high-field electron spin resonance, and unbiased quantum Monte Carlo simulations, provide a detailed, comprehensive characterization of NiBO. Vibrational (also known as phonon) properties of NiBO have been probed by INS and density-functional theory (DFT) calculations, indicating the absence of phonons near magnetic excitations in NiBO, suppressing spin-phonon coupling. The work here demonstrates that NiBO is indeed a rare 2D-MOF Haldane topological material.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Photoelectrochemical alcohol oxidation by mixed-linker metal–organic frameworks

Metal–organic frameworks (MOFs) provide a suitable platform for stable and efficient heterogeneous photoelectrochemical oxidation catalysis due to their highly ordered structure, large surface area, and synthetic tunability. Herein, a mixed-linker MOF comprising of a photosensitizer [Ru(dcbpy)(bpy) 2 ] 2+ (bpy = 2,2'-bipyridine, dcbpy = 5,5'-dicarboxy-2,2'-bipyridine) and catalyst [Ru(tpy)(dcbpy)Cl] + (tpy = 2,2':6',2''-terpyridine) that were incorporated into the UiO-67 framework and grown as thin films on a TiO 2 -coated, fluorine-doped tin oxide (FTO) electrode (RuB-RuTB-UiO-67/TiO 2 /FTO). When used as an electrode for the photoelectrochemical oxidation of benzyl alcohol, the mixed-linker MOF film showed a faradaic efficiency of 34%, corresponding to a 3-fold increase in efficiency relative to the RuB-UiO-67/TiO 2 /FTO control. Furthermore, this increase in catalytic efficiency is ascribed to the activation of RuTB moieties via oxidation by photogenerated Ru III B. Transient absorption spectroscopy revealed the delayed appearance of Ru III TB* or Ru III TB formation, occurring with a lifetime of 21 ns, due to energy and/or electron transfer. The recovery kinetics of the charge separated state was increased (283 μs) in comparison to single-component control experiments (105 μs for RuB-UiO-67/TiO 2 /FTO and 7 μs for RuTB-UiO-67/TiO 2 /FTO) indicating a cooperative effect that could be exploited in chromophore/catalyst MOF motifs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Low-spin cobalt(ii) redox shuttle by isocyanide coordination

Coordination of the strong-field ligand 2,6-dimethylphenyl isocyanide (DMP-CN) to the Co(PY5Me 2 ) framework, where PY5Me 2 represents the pentadentate ligand 2,6-bis(1,1-bis(2-pyridyl)ethyl)pyridine, has resulted in a new low-spin Co(II) complex with a relatively low reorganization energy and fast electron-transfer kinetics compared to the prototypical cobalt tris-bipyridine redox shuttle, [Co(bpy) 3 ] 3+/2+ , where bpy represents 2,2'-bipyridine. Despite nearly 160 mV reduced regeneration driving force, the [Co(PY5Me 2 )(DMP-CN)]3+/2+ redox shuttle displayed an increased regeneration efficiency relative to [Co(bpy)3] 3+/2+ , however recombination losses hinder the performance as evidenced by a reduced recombination resistance. Finally, future directions point to low-spin Co(II) redox shuttles with more negative redox potentials to be paired with a dye or dye mixture that absorbs into the near infrared region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Organocatalysis in ring opening copolymerization as a means of tailoring molecular weight dispersity and the subsequent impact on physical properties in 4D printable photopolymers

Vat photopolymerization 3D printing has traditionally relied on free radical crosslinking between alkenes to produce non-degradable parts, which may have limited use in the biomedical and clinical spaces. Photopolymer resins containing functionalized degradable polymers, specifically polyesters, are greatly interesting for 3D printing tissue scaffolds and medical devices. Unfortunately, most polyesters produced for these applications have been made using metal-containing catalysts, which are not without risk for medical applications. Organocatalysis is a viable alternative route to achieving the same types of polyesters. Here, ring opening copolymerization (ROCOP) of allyl and cyclohexene-containing polyesters is examined using bipyridine and a guanidine-containing catalyst. The role of the catalysts, initiators, and cocatalysts are examined for bulk, open air ROCOP reactions. Unlike previous efforts with organocatalysis, the examined catalysts here could be used to tailor the dispersity of the polyesters, with ~10 kDa polyesters with dispersity ranging from 1.3 to 2.5 examined for the impact on rheological and thermomechanical properties related to resin/part behavior. The bipyridine catalysts and a thiourea cocatalyst further are shown, through the introduction of new fluorescence emissions of the purified polyesters. As a result, this work demonstrates that tuning the dispersity of polyester photopolymers provides a direct method of tailoring physical and optical properties in 3D/4D printable materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Ultra-stable and poison tolerant oxygen evolution activity enabled by surface In 2 O 3- x (OH) y of Co 3 In 2 S 2 large single crystals

Water is an earth-abundant source for clean hydrogen production via electrochemical water electrolysis (WE). However, the surface poisoning that occurs in aqueous electrolytes drastically deactivates the electrocatalytic performance of electrodes. Here, in this study, we report electrochemically formed In 2 O 3-x (OH) y on the surface of a large (1–1.5 mm long, 0.5–0.6 mm wide and 0.3–0.5 mm thick) single crystal of Weyl semimetal Co 3 In 2 S 2 (Co 3 In 2 S 2 /In 2 O 3-x (OH) y ) as an ultra-stable and poison tolerant electrode for the oxygen evolution reaction (OER) in 1 M KOH, addressing a bottleneck in WE. The OER activity of the powder form of Co 3 In 2 S 2 is limited by its aerophilic nature. Remarkably, the single-crystal electrodes maintained their high activity for a continuous operational period of 5 h in 1 M KOH electrolyte with/without 10 mM strong surface-poisoning ligands i.e., potassium cyanide, bipyridine, and ethylenediaminetetraacetate disodium salt. The electrodes exhibited stable OER activity for 1000 h at 100 mA cm -2 (1.73 V vs. RHE). The temperature-dependent OER polarization curves (10–70 °C) unambiguously revealed surface poisoning through the suppression of precatalytic Co-redox peaks on the bipyridine poisoned electrode, which led to the stabilization of surface Co-sites. The X-ray photoelectron spectroscopy analyses of pristine, poisoned and post-electrocatalytic single-crystal Co 3 In 2 S 2 electrodes revealed the existence of an In 2 O 3-x (OH) y surface phase, which could be the potential heterostructure for the origin of ultra-stable and poison tolerant OER activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Vibrational Spin-Orbit Coupling Contributions to Excited State Decay of Ligand-to-Ligand Charge Transfer States

Controlling excited state relaxation processes is important in a variety of photochemical and photophysical processes, including the generation of ground and excited state spin polarization for quantum information science applications. Here, we address how specific static distortions – based on vibrational spin-orbit active modes at C2v symmetry determined by group theory – in a series of low-symmetry ligand-to-ligand charge transfer complexes enable direct spin-orbit coupling contributions to T1 → S0 excited state decay. These results are used to address spin-vibronic coupling contributions to T1 → S0 decay in a high-symmetry (tBu2bpy)Pt(S,S) (tBu2bpy = 4,4’-di-tert-butyl-2,2’-bipyridine and S,S = benzene-1,2-dithiolate) ligand-to-ligand charge transfer complex with effective C2v symmetry, where T1 relaxation is both spin- and orbitally forbidden due to the direct spin-orbit coupling matrix element being zero by symmetry. Low-frequency vibrations that involve a pyridine-pyridine twisting motion within the bpy ligand generate large ∂/∂Qi values that will contribute significantly to T1 → S0 relaxation. The work advances ligand design strategies for the generation of tailored T1 → S0 relaxation rates, which can be utilized to optimize the generation of electron spin polarization in radical-elaborated ligand-to-ligand charge transfer complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Mimicking Natural Photosynthesis: Designing Ultrafast Photosensitized Electron Transfer into Multiheme Cytochrome Protein Nanowires

Efficient nanomaterials for artificial photosynthesis require fast and robust unidirectional electron transfer (ET) from photosensitizers through charge-separation and accumulation units to redox-active catalytic sites. We explored the ultrafast time-scale limits of photo-induced charge transfer between a Ru(II)tris(bipyridine) derivative photosensitizer and PpcA, a 3-heme c-type cytochrome serving as a nanoscale biological wire. Four covalent attachment sites (K28C, K29C, K52C, and G53C) were engineered in PpcA enabling site-specific covalent labeling with expected donor-acceptor (DA) distances of 4–8 Å. X-ray scattering results demonstrated that mutations and chemical labeling did not disrupt the structure of the proteins. Time-resolved spectroscopy revealed three orders of magnitude difference in charge transfer rates for the systems with otherwise similar DA distances and the same number of covalent bonds separating donors and acceptors. All-atom molecular dynamics simulations provided additional insight into the structure-function requirements for ultrafast charge transfer and the requirement of van der Waals contact between aromatic atoms of photosensitizers and hemes in order to observe sub-nanosecond ET. This work demonstrates opportunities to utilize multi-heme c-cytochromes as frameworks for designing ultrafast light-driven ET into charge-accumulating biohybrid model systems, and ultimately for mimicking the photosynthetic paradigm of efficiently coupling ultrafast, light-driven electron transfer chemistry to multi-step catalysis within small, experimentally versatile photosynthetic biohybrid assemblies.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Metal–Ligand Based Mechanophores Enhance Both Mechanical Robustness and Electronic Performance of Polymer Semiconductors

The backbone of diketopyrrolopyrrole-thiophene-vinylene-thiophene-based polymer semiconductors (PSCs) is modified with pyridine (Py) or bipyridine ligands to complex Fe(II) metal centers, allowing the metal–ligand complexes to act as mechanophores and dynamically crosslink the polymer chains. Here, mono- and bi-dentate ligands are observed to exhibit different degrees of bond strengths, which subsequently affect the mechanical properties of these Wolf-type-II metallopolymers. The counter ion also plays a crucial role, as it is observed that Py-Fe mechanophores with non-coordinating BPh 4 – counter ions (Py-FeB) exhibit better thin film ductility with lower elastic modulus, as compared to the coordinating chloro ligands (Py-FeC). Interestingly, besides mechanical robustness, the electrical charge carrier mobility can also be enhanced concurrently when incorporating Py-FeB mechanophores in PSCs. This is a unique observation among stretchable PSCs, especially that most reports to date describe a decreased mobility when the stretchability is improved. Next, it is determined that improvements to both mobility and stretchability are correlated to the solid-state molecular ordering and dynamics of coordination bonds under strain, as elucidated via techniques of grazing-incidence X-ray diffraction and X-ray absorption spectroscopy techniques, respectively. This study provides a viable approach to enhance both the mechanical and the electronic performance of polymer-based soft devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Saddle-Shaped Third Component with Out-of-Plane Electrostatic Dipole for Realizing High-Performance Photovoltaic Donor Terpolymers

Terpolymer fabrication is an effective methodology for molecular engineering and generating high-performance organic photovoltaic materials to construct highly efficient polymer solar cells. Modification of the polymer PM6 by incorporating a third component resulting in the formation of a ternary copolymer is reported to outperform PM6 in achieving enhanced device performances. However, one of the major challenges in constructing high-performance terpolymers is to counter the molecular disorder caused by the backbone entropy induced by the third moiety. Here, in this work, double B←N bridged bipyridine (BNBP) is used as the third component, which possesses a strong out-of-plane electrostatic dipole owing to the saddle-shaped B←N fused ring structure. The out-of-plane dipole moment introduced in the modified PM6 terpolymer can be used as a means for tuning and optimizing the nanostructures of the blended films. The prepared PM6-BNBP-4 blend polymer with 4% of the benzodithiophene dione monomers replaced by BNBP results in excellent power conversion efficiency of 19.13%. This work demonstrates that the out-of-plane electrostatic dipole moment in saddle-shaped molecules is valuable for achieving high-performance organic photovoltaic donor materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Near Neutral pH Redox Flow Battery with Low Permeability and Long-Lifetime Phosphonated Viologen Active Species

A highly stable phosphonate-functionalized viologen is introduced in this work as the redox-active material in a negative potential electrolyte for aqueous redox flow batteries (ARFBs) operating at nearly neutral pH. The solubility is 1.23 m and the reduction potential is the lowest of any substituted viologen utilized in a flow battery, reaching –0.462 V versus SHE at pH = 9. The negative charges in both the oxidized and the reduced states of 1,1'-bis(3-phosphonopropyl)-[4,4'-bipyridine]-1,1'-diium dibromide ( BPP–Vi ) effect low permeability in cation exchange membranes and suppress a bimolecular mechanism of viologen decomposition. A flow battery pairing BPP–Vi with a ferrocyanide-based positive potential electrolyte across an inexpensive, non-fluorinated cation exchange membrane at pH = 9 exhibits an open-circuit voltage of 0.9 V and a capacity fade rate of 0.016% per day or 0.00069% per cycle. Overcharging leads to viologen decomposition, causing irreversible capacity fade. Our research introduces extremely stable, extremely low-permeating and low reduction potential redox active materials into near neutral ARFBs.

25 ENERGY STORAGE↗
DOE OSTI2022

Intraligand Charge Transfer Enables Visible‐Light‐Mediated Nickel‐Catalyzed Cross‐Coupling Reactions**

Abstract We demonstrate that several visible‐light‐mediated carbon−heteroatom cross‐coupling reactions can be carried out using a photoactive Ni II precatalyst that forms in situ from a nickel salt and a bipyridine ligand decorated with two carbazole groups (Ni(Czbpy)Cl 2 ). The activation of this precatalyst towards cross‐coupling reactions follows a hitherto undisclosed mechanism that is different from previously reported light‐responsive nickel complexes that undergo metal‐to‐ligand charge transfer. Theoretical and spectroscopic investigations revealed that irradiation of Ni(Czbpy)Cl 2 with visible light causes an initial intraligand charge transfer event that triggers productive catalysis. Ligand polymerization affords a porous, recyclable organic polymer for heterogeneous nickel catalysis of cross‐coupling reactions. The heterogeneous catalyst shows stable performance in a packed‐bed flow reactor during a week of continuous operation.

Cavedon, Cristian↗
DOE OSTI2024

Room‐Temperature Formate Ester Transfer Hydrogenation Enables an Electrochemical/Thermal Organometallic Cascade for Methanol Synthesis from CO 2

Abstract The reduction of CO 2 to synthetic fuels is a valuable strategy for energy storage. However, the formation of energy‐dense liquid fuels such as methanol remains rare, particularly under low‐temperature and low‐pressure conditions that can be coupled to renewable electricity sources via electrochemistry. Here, a multicatalyst system pairing an electrocatalyst with a thermal organometallic catalyst is introduced, which enables the reduction of CO 2 to methanol at ambient temperature and pressure. The cascade methanol synthesis proceeds via CO 2 reduction to formate by electrocatalyst [Cp*Ir(bpy)Cl] + (Cp*=pentamethylcyclopentadienyl, bpy=2,2′‐bipyridine), Fischer esterification of formate to isopropyl formate catalyzed by trifluoromethanesulfonic acid (HOTf), and thermal transfer hydrogenation of isopropyl formate to methanol facilitated by the organometallic catalyst (H‐PNP)Ir(H) 3 (H‐PNP=HN(C 2 H 4 P i Pr 2 ) 2 ). The isopropanol solvent plays several crucial roles: activating formate ion as isopropyl formate, donating hydrogen for the reduction of formate ester to methanol via transfer hydrogenation, and lowering the barrier for transfer hydrogenation through hydrogen bonding interactions. In addition to reporting a method for room‐temperature reduction of challenging ester substrates, this work provides a prototype for pairing electrochemical and thermal organometallic reactions that will guide the design and development of multicatalyst cascades.

Fernández, Sergio [Department of Chemistry Univers↗
DOE OSTI2022

Intraligand Charge Transfer Enables Visible‐Light‐Mediated Nickel‐Catalyzed Cross‐Coupling Reactions**

Abstract We demonstrate that several visible‐light‐mediated carbon−heteroatom cross‐coupling reactions can be carried out using a photoactive Ni II precatalyst that forms in situ from a nickel salt and a bipyridine ligand decorated with two carbazole groups (Ni(Czbpy)Cl 2 ). The activation of this precatalyst towards cross‐coupling reactions follows a hitherto undisclosed mechanism that is different from previously reported light‐responsive nickel complexes that undergo metal‐to‐ligand charge transfer. Theoretical and spectroscopic investigations revealed that irradiation of Ni(Czbpy)Cl 2 with visible light causes an initial intraligand charge transfer event that triggers productive catalysis. Ligand polymerization affords a porous, recyclable organic polymer for heterogeneous nickel catalysis of cross‐coupling reactions. The heterogeneous catalyst shows stable performance in a packed‐bed flow reactor during a week of continuous operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗