Search NASA⌕ Search

SEARCH · Search NASA

Results for “British Columbia”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Evaluate ERTS imagery for mapping and detection of changes of snowcover on land and on glaciers

The author has identified the following significant results. Preliminary results on the feasibility of mapping snow cover extent have been obtained from a limited number of ERTS-1 images of mountains in Alaska, British Columbia, and Washington. The snowline on land can be readily distinguished, except in heavy forest where such distinction appears to be virtually impossible. The snowline on very large glaciers can also be distinguished remarkably easily, leading to a convenient way to measure glacier accumulation area ratios or equilibrium line altitude. Monitoring of large surging glaciers appears to be possible, but only through observation of a change in area and/or medial moraine extent. Under certain conditions, ERTS-1 imagery appears to have high potential for mapping snow cover in mountainous areas. Distinction between snow and clouds appears to require use of the human eye, but in a cloud-free scene the snow cover is sufficiently distinct to allow use of automated techniques. This technique may prove very useful as an aid in the monitoring of the snowpack water resource and the prediction of summer snowmelt runoff volume.

Meier, M. F.↗

Principal sources and dispersal patterns of suspended particulate matter in nearshore surface waters of the northeast Pacific Ocean and the Hawaiian Islands

The author has identified the following significant results. Numerous geologic features can be discerned on ERTS-1 imagery of the northwestern Olympic Peninsula, Washington, and southern Vancouver Island, British Columbia. A thick homoclinal sequence of north-dipping Tertiary marine strata along the northwestern Olympic Peninsula is readily discernible because of the banded nature of its outcrop. The submarine basalt on which the sequence rests shows as a high, rugged ridge. Within the sedimentary sequence, alternating sandstone and siltstone members 100 m or more thick show in the southeast corner of the image. Broad folds in this banded sequence and faults that cut it can be detected. One large fault, the Pysht River fault, and a large syncline in sandstone and siltstone east of it show prominently on the image. Numerous lineations on the image of southern Vancouver Island correlate with faults shown on Muller's map. Particularly prominent are the Leech River and San Juan faults along the southernmost part of the island.

Carlson, P. R.↗

Evaluate ERTS imagery for mapping and detection of changes of snowcover on land and on glaciers

The author has identified the following significant results. The standard error of measurement of snow covered areas in major drainage basins in the Cascade Range, Washington, using single measurements of ERTS-1 images, was found to range from 11% to 7% during a typical melt season, but was as high as 32% in midwinter. Many dangerous glacier situations in Alaska, Yukon, and British Columbia were observed on ERTS-1 imagery. Glacier dammed lakes in Alaska are being monitored by ERTS-1. Embayments in tidal glaciers show changes detectable by ERTS-1. Surges of Russell and Tweedsmuir Glaciers, now in progress, are clearly visible. The Tweedsmuir surge is likely to dam the large Alsek River by mid-November, producing major floods down-river next summer. An ERTS-1 image of the Pamir Mountains, Tadjik S.S.R., shows the surging Medvezhii (Bear) Glacier just after its surge of early summer which dammed the Abdukagor Valley creating a huge lake and later a flood in the populous Vanch River Valley. A map was compiled from an ERTS-1 image of the Lowell Glacier after its recent surge, compared with an earlier map compiled from pain-stakingly compiled from a mosaic of many aerial photographs, in a total elapsed time of 1.5 hours. This demonstrates the value of ERTS-1 for rapid mapping of large features.

Meier, M. F.↗

Are clear-cut areas estimated from LANDSAT imagery reliable?

The reliability of LANDSAT imagery for estimation of clear-cut areas was evaluated by comparison with data obtained from high-altitude photos and logging historical map and from field inspections. A mature forest was selected as a test site because of its continuous clear-cut operation. The forest is about 50 km northwest of Victoria, British Columbia, Canada, and consists of 9092 ha. Areas clear-cut within the past year were overestimated by 12.9%, those clear-cut 1-year or more by 2.2%, whereas uncut mature timber was underestimated by 3.6%. Three clear-cut areas were missed in the logging map and two in the LANDSAT enhancement. The difference between area estimates was significant when all 26 areas were included but not when 2 overestimated areas were excluded from the analysis. The study indicates that LANDSAT imagery color enhancement is a useful tool in up-dating clear-cut areas for long-term planning in forest management.

Lee, Y. J.↗

Late-Quaternary climatic change on the American North Pacific Coast

The late Quaternary climate of the North Pacific, where according to modelling the solar radiation in the early Holocene at the time of the summer solstice is high and in the late Holocene is relatively low, is investigated. Quantitative temperature and precipitation estimates from southern Alaska are compared with estimates from western Washington and British Columbia. Data extending over more than 10,000 years show a broadly consistent pattern of climatic change in general agreement with predicted variations in solar radiation and their effect on atmospheric circulation and seasonal duration of pressure systems over the North Pacific Ocean. In the early Holocene, the subtropical North Pacific anticyclone annually regulated climate for a longer period at higher latitudes than at present, so that warmth and dryness increased in southern Alaska. The Aleutian low-pressure center intensified during the late Holocene, resulting in colder and more humid coastal climate and increased frequency of glacier growth in the cordillera.

Heusser, C. J.↗

Crustal dynamics project data analysis, 1986. Volume 1: Fixed station VLBI geodetic results

The Goddard VLBI group reports the results of analyzing 361 Mark III VLBI data sets from fixed observatories through the end of 1985 which are available to the Crustal Dynamics Project. All POLARIS/IRIS full-day data sets are included. The mobile VLBI sites at Platteville, Colorado; Penticton, British Columbia; and Yellowknife, Northwest Territories are also included since these occupations bear on the study of plate stability. Two large solutions, GLB027 and GLB028, were used to obtain site/baseline evolutions and earth rotation parameters, respectively. Source positions and nutation offsets were also adjusted in each solution. The results include 23 sites and 101 baselines.

Ma, C.↗

Crustal dynamics project data analysis, 1987. Volume 1: Fixed station VLBI geodetic results, 1979-1986

The Goddard VLBI group reports the results of analyzing Mark III data sets from fixed observatories through the end of 1986 and available to the Crustal Dynamics Project. All full-day data from POLARIS/IRIS are included. The mobile VLBI sites at Platteville (Colorado), Penticton (British Columbia), and Yellowknife (Northwest Territories) are also included since these occupations bear on the study of plate stability. Two large solutions, GLB121 and GLB122, were used to obtain Earth rotation parameters and baseline evolutions, respectively. Radio source positions were estimated globally while nutation offsets were estimated from each data set. The results include 25 sites and 108 baselines.

Ryan, J. W.↗

Global sea-level changes during the past century

A novel technique, initially developed for climate studies, is used to reevaluate the estimate of relative sea-level change over the past century. The technique produces a composite regional average sea-level curve from the tide-gage data of individual stations. The effects of glacioisostasy and long-term tectonism are accounted for using late Holocene sea-level indicators. Along the east coast of North America, an apparent maximum sea-level rise is detected in both tide-gage and late Holocene sea-level indicators between Chesapeake Bay and New Jersey. Sea-level changes in western North America reveal greater spatial variations than for the east coast, which can be related to more active tectonism in California and British Columbia and to strong localized isostatic rebound in Alaska.

Gornitz, Vivien↗

Nature of the Coast Batholith, Southeastern Alaska: Are there Archean analogs

The comparison of Phanerozoic Andean margins and their possible Archean analogs was made. Geochemical and isotopic data was presented for the episodic intrusion of the elongate, continental margin Coast batholith of southeastern Alaska and British Columbia. The batholith was characterized as having been formed in direct response to subduction in accreted terranes of oceanic or slope origin. It was concluded that there were good analogs of the Coast batholith in Archean plutonic suites.

Barker, Fred↗

Relationships between near-surface plankton concentrations, hydrography, and satellite-measured sea surface temperature

Sea surface temperatures (SSTs) mapped by IR satellite images and in situ hydrographic measurements off the west coast of British Columbia for early-winter and midsummer periods were correlated with in situ measurements of surface chlorophyll and zooplankton concentration. Correlations between winter log(e) transformed zooplankton concentrations and SSTs demonstrated that IR satellite imagery could explain 49 percent of the sampled zooplankton concentration variance. A least-squares-fit nonlinear equation showed that satellite-measured SST patterns explained 72 percent of the log(e) transformed chlorophyll variance. However, summer zooplankton concentrations were not consistently related to satellite temperature patterns.

Thomas, A. C.↗

The K-Gill - A twin propeller-vane anemometer for measurements of atmospheric turbulence

A twin propeller-vane anemometer developed at the University of British Columbia was successfully used for unattended measurement of atmospheric turbulence over extended periods of time during moderate to high winds in the presence of sea spray. In this paper, a new design in twin propeller-vane anemometers is introduced. The instrument consists of two Gill anemometers mounted on a vane. The propeller shafts, one pointing up and the other pointing down, make an angle of 45 deg with the horizontal (hence, the name K-Gill). In addition to the desirable characteristics of the earlier design the K-Gill has symmetry, so that updraft and downdraft winds are measured with equal sensitivity. An algorithm for obtaining the vertical and downstream horizontal components of the wind velocity is described. Various sources of error and their magnitudes are discussed.

Atakturk, Serhad S.↗

Methane oxidation in Saanich Inlet during summer stratification

Saanich Inlet, British Columbia, an fjord on the southeast coast of Vancouver Island, typically stratifies in summer, leading to the formation of an oxic-anoxic interface in the water column and accumulation of methane in the deep water. The results of methane concentration measurements in the water column of the inlet at various times throughout the summer months in 1983 are presented. Methane gradients and calculated diffusive fluxes across the oxic-anoxic interface increased as the summer progressed. Methane distribution and consumption in Saanich Inlet were studied in more detail during August 1986. At this time, a typical summer stratification with an oxic-anoxic interface around 140 m was present. At the interface, steep gradients in nutrient concentrations, bacterial abundance and methane concentration were observed. Methane oxidation was detected in the aerobic surface waters and in the anaerobic deep layer, but highest rates occurred in a narrow layer at the oxic-anoxic interface. Estimated methane oxidation rates were suffcient to consume 100 percent of the methane provided by diffusive flux from the anoxic layer. Methane oxidation is thus a mechanism whereby atmospheric flux from anoxic waters is minimized.

Ward, B. B.↗

Atmospheric effects of a Canadian forest fire smoke plume

In 1982, a northern British Columbia forest fire created a massive smoke plume that could be detected for several days in satellite imagery. The radiative and dynamical impacts of this large forest fire smoke plume are investigated using interactive prognostic models of atmospheric circulation, aerosol microphysics and transport, and radiative heat transfer.

Westphal, Douglas L.↗

Advanced software development workstation. OOPSLA 1992 Conference. Trip report

This report summarizes the main trends observed at the Object Oriented Programming Systems, Languages, and Applications Conference held in Vancouver, British Columbia. This conference is the main object-oriented event that allows us to assess the dynamism of the technology and to meet the main actors of the field. It is an invaluable source of information for the advanced software development project.

Izygon, Michel E.↗

Chemical transport during formation and alteration of Martian impact and volcanic deposits

Much of the surface of Mars, including volcanic and cratered terrains, probably experienced alteration and degassing processes. These processes may have depleted or enriched many important elements in surface materials, including bedrock, dust, and soils. The composition of the martian soil may represent the best estimate, for some elements, of the average composition of the martian crust, similar to the composition of loess created by glacial action on the Earth. The martian soil may represent the only convenient, globally or regionally averaged sample of the martian crust. In order to understand the composition of the source material for the soil, however, we need to understand the contributions of volcanic vs. impact sources for this material and the chemical fractionations involved in its production. The processes to be addressed include degassing of volcanic deposits, as observed in the Valley of Ten Thousand Smokes at Katmai, Alaska, and degassing of meltbearing impact ejecta as inferred for suevite ejecta sheets at the Ries Crater, and alteration or palagonitization of volcanic deposits, as documented for volcanos in British Columbia and many other volcanic terrains, and impact crater deposits. The process of palagonitization has been the subject of several studies with reference to Mars, and palagonite is a good analogue for the spectroscopic properties of the martian dust. The role of impact in cratering has not been as well studied, although other researchers have established that both degassing and alteration are common features of impact crater deposits. Other relevant sources of experimental data include the extensive literature on the corrosion of nuclear waste glass and leaching of shocked materials.

Newsom, H. E.↗

Estimation of crown closure from AVIRIS data using regression analysis

Crown closure is one of the input parameters used for forest growth and yield modelling. Preliminary work by Staenz et al. indicates that imaging spectrometer data acquired with sensors such as the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) have some potential for estimating crown closure on a stand level. The objectives of this paper are: (1) to establish a relationship between AVIRIS data and the crown closure derived from aerial photography of a forested test site within the Interior Douglas Fir biogeoclimatic zone in British Columbia, Canada; (2) to investigate the impact of atmospheric effects and the forest background on the correlation between AVIRIS data and crown closure estimates; and (3) to improve this relationship using multiple regression analysis.

Staenz, K.↗

Use of prismatic films to control light distribution

Piping light for illumination purposes is a concept which has been around for a long time. In fact, it was the subject of an 1881 United States patent which proposed the use of mirrors inside a tube to reflect light from wall to wall down the tube. The use of conventional mirrors for this purpose, however, has not worked because mirrors do not reflect well enough. On the other hand, optical fibers composed of certain glasses or plastics are known to transport light much more efficiently. The light that enters is reflected back and forth within the walls of the fiber until it reaches the other end. This is possible by means of a principle known as 'total internal reflection'. No light escapes through the walls and very little is absorbed in the bulk of the fiber. However, while optical fibers are very efficient in transporting light, they are impractical for transporting large quantities of light. Lorne Whitehead, as a student at the University of British Columbia, recognized that prismatic materials could be used to create a 'prism light guide', a hollow structure that can efficiently transport large quantities of light. This invention is a pipe whose transparent walls are formed on the outside into precise prismatic facets. The facets are efficient total internal reflection mirrors which prevent light travelling down the guide from escaping. Very little light is absorbed by the pipe because light travels primarily in the air space within the hollow guide. And, because the guide is hollow, weight and cost factors are much more favorable than would be the case with very large solid fibers. Recent advances in precision micromachining, polymer processing, and certain other manufacturing technologies have made the development of OLF (Optical Lighting Film) possible. The process is referred to as 'microreplication' and has been found to have broad applicability in a number of diverse product areas.

Kneipp, K. G.↗

Program for Continued Development and Use of Ocean Acoustic/GPS Geodetic Techniques

Under prior NASA grants our group, with collaboration from scientists at the CalTech Jet Propulsion Lab (JPL), visualized and carried out the initial development of a combined GPS and underwater acoustic (GPS/A) method for determining the location of points on the deep sea floor with accuracy relevant to studies of crustal deformation. Under an immediately preceding grant we built, installed and surveyed a set of the necessary seafloor marker precision transponders just seaward of the Cascadia Subduction Zone off British Columbia. The JPL group carried out processing of the GPS data.

Spiess, Fred N.↗