Search NASA⌕ Search

SEARCH · Search NASA

Results for “CCT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Utilization of ERTS-1 data to monitor and classify eutrophication of inland lakes

The author has identified the following significant results. Bands 6 and 7 have fine structure as obtained by proper selection of digital levels in processing the CCT's. This is contrary to the imagery density received. This means that the small lakes can be classified in IR for different types of water masses. At least four distinct water masses have been determined for test lakes. They are shoreline, shallow water, and two deep waters. One deep water is patchy and presents difficulty in training set selection. The excellent weather and a completely successful field test form a significant happening. It required 12 orbits over the test area before perfect weather occurred.

Chase, P. E.↗

Multispectral signatures in relation to ground control signatures using nested sampling approach

The author has identified the following signficant results. An experiment was conducted to evaluate the feasibility of using ERTS-1 MSS imagery for spot transmission measurements on selected sites. Using the 15-unit gray scale on the 70 mm positive imagery as the base of comparison, a correlation was made between the transmittance measured at each site on the imagery and the radiance values (counts) recorded on CCT tape by the spacecraft over the same sites. The imagery was enlarged by a 750-watt projector and focused on a white cardboard screen 6 meters from the screen. Observations were made on 30 sub-sites which were pre-selected for their differing image brightness and total area; all are dried pond beds. Observations were also made on average gray backgrounds and a small lake. There was a very good correlation between the density values obtained from projected imagery and radiance values received by the detector on the spacecraft. A shorter experiment time and closer integration of gray scale and site readings would avoid the variation in lamp intensities that occurred.

Lyon, R. J. P.↗

Digital analysis of Potomac River Basin ERTS imagery: Sedimentation levels at the Potomac-Anacostia confluence and strip mining in Allegheny County, Maryland

Two simple algorithms for classification of sedimentation levels in water and for delineation of active strip mines are in use as part of the development of a more general resource management information system. ERTS MSS CCT's are processed so that each pixel in each channel is geographically referenced and can be accessed individually during whole frame, multi-channel analysis or partial frame analysis. The sedimentation analysis clearly separates classes representing the turbid Anacostia water, the less disturbed Potomac (really), and mud flats resulting from effluent of a major sewage treatment plant. Mud flats of organic or mineral origin are easily distinguished.

Schubert, J. S.↗

Utilization of ERTS-1 data to monitor and classify eutrophication of inland lakes

A technique is being developed for use of ERTS in estimating and monitoring trophic levels of inland lakes. Preliminary findings are that Michigan lakes and ponds of one acre or more are resolvable in bands 5, 6 and 7 of NASA MSS imagery under fair conditions (haze and 70% cloud cover). In processed imagery (CCT) smaller features, including water color patterns, are evident within some lakes of 40 acres or more. Image distortion of lake size, shape, orientation, etc. is minimal; discrimination of lakes and ponds from various wetlands is good. Subsequent ERTS and aircraft imagery will be correlated with detailed ground truth of water color and quality in eutrophic test lakes.

Chase, P. E.↗

Reflectance of vegetation, soil, and water

The author has identified the following significant results. A ratio of MSS channels 5 and 7 (5/7) and 5 to 6 (5/6) signals resulted in a correct recognition of 86.9% of the members of representative crop and soil conditions, compared with recognitions of 60.0, 64.1, 74.1, and 81.4% for channels 4, 5, 6, and 7 taken individually. Based on this result a satellite channel ratio procedure has been developed that enhances line printer gray maps for more efficient experimental test site location in the CCT data. Because independent estimates are not available to judge acreage estmates derived from ERTS-1 data against, except for a few crops, an interpenetrating sample constituting 3.5% of the county is ground truthed periodically. The crop of land uses and their acreages, respectively, as estimated from the interpenetrating samples, are: cotton, 129, 714; sorghum, 182,783; mixed citrus, 53,954; oranges, 16,929; grapefruit, 13,863; rangeland, 137,845; and, improved pastures, 57.169.

Wiegand, C. L.↗

ERTS data user investigation to develop a multistage forest sampling inventory system

The author has identified the following significant results. A unique digital timber volume estimation system was developed for use with the MSS CCT tapes. The system was tested on a 64-square mile area in Northern California's Trinity Alps. The outcome of a systematic experiment, in which several possible combinations of bands 5 and 7 and a contrast measure were tried, showed that an estimated gain in precision of 50% can be obtained in a multistage sampling design. The difference between bands 5 and 7 proved to be of special importance for the estimation of biomass in the form of timber volume. In addition, an interpretation model for high flight U2 photographs was developed. A maximum multiple correlation coefficient of 0.74 was obtained for the regression model, explaining 55% of the variation in timber volume as estimated from aerial photos and ground measurments. An interpretation model for MSS color composites is in the testing stage.

Langley, P. G.↗

Multispectral signatures in relation to ground control signature using nested sampling approach

The author has identified the following significant results. Principal effort has been on the development of a PDP-10 software package to read the CCT tapes more cheaply and rapidly. This is 90% completed and debugged. A shade print example of Treasure Island is provided. Stanford area was overflown with the U-2 as an add-on photographic mission to help fill in record-gaps in ERTS-1 overpass which was clouded out.

Lyon, R. J. P.↗

ERTS-1 Virgin Islands experiment 589: Determine boundaries of ERTS and aircraft data within which useful water quality information can be obtained

The author has identified the following significant results. The boundaries of application of ERTS-1 and aircraft data are established for St. Thomas harbor within which useful water quality information can be obtained. In situ physical, chemical, and biological water quality and benthic data were collected. Moored current meters were employed. Optical measurements of solar irradiance, color test panel radiance and water absorption were taken. Procedures for correlating in situ optical, biological, and chemical data with underflight aircraft I2S data and ERTS-1 MSS scanner data are presented. Comparison of bulk and precision CCT computer printout data for this application is made, and a simple method for geometrically locating bulk data individual pixels based on land-water interface is described. ERTS spacecraft data and I2S aircraft imagery are correlated with optical in situ measurements of the harbor water, with the aircraft green photographic and ERTS-1 MSS-4 bands being the most useful. The biological pigments correlate inversely with the optical data for inshore areas and directly further seaward. Automated computer data processing facilitated analysis.

Coulbourn, W. C.↗

Identification of phenological stages and vegetative types for land use classification

The author has identified the following significant results. Recent signature identification and refinement techniques indicate that with automated classification of MSS CCT data commercial stands of cottonwood and white spruce can be identified with 80% accuracy in the Bonanza Creek experimental forest. Since that forest is representative of the vast interior Alaska forests, this finding has substantial economic importance to public and private forestry interests in Alaska.

Mckendrick, J. D.↗

Reflectance of vegetation, soil, and water

The author has identified the following significant results. Iron deficient and normal grain sorghum plants were sufficiently different spectrally in ERTS-1 band 5 CCT data to detect chlorotic sorghum areas 2.8 acres (1.1 hectares) or larger in size in computer printouts of the MSS data. The ratio of band 5 to band 7 or band 7 minus band 5 relates to vegetation ground cover conditions and helps to select training samples representative of differing vegetation maturity or vigor classes and to estimate ground cover or green vegetation density in the absence of ground information. The four plant parameters; leaf area index, plant population, plant cover, and plant height explained 87 to 93% of the variability in band 6 digital counts and from 59 to 90% of the variation in bands 4 and 5. A ground area 2244 acres in size was classified on a pixel by pixel basis using simultaneously acquired aircraft support and ERTS-1 data. Overall recognition for vegetables, immature crops and mixed shrubs, and bare soil categories was 64.5% for aircraft and 59.6% for spacecraft data, respectively. Overall recognition results on a per field basis were 61.8% for aircraft and 62.8% for ERTS-1 data.

Wiegand, C. L.↗

The utilization of ERTS-1-generated photographs in the evaluation of the Iranian playas as potential locations for economic and engineering development

The author has identified the following significant results. False-color composites made from ratioed and stretched transparencies, generated from CCT's of ERTS-1, have enhanced hydrologic and morphologic differences within the playa surficial sediments. A composite of ratios 4/6, 5/7,15/61 and 4/7 using blue, red, yellow, and green, respectively, was useful in separating wet, water, and dry areas in the salt crust and for delineating smooth and rough salt where relief was less than 20 cm.

Krinsley, D. B.↗

Kansas environmental and resource study: A Great Plains model. Monitoring fresh water resources

The author has identified the following significant results. Processing and analysis of CCT's for numerous ground truth supported passes over Kansas reservoirs has demonstrated that sun angle and atmospheric conditions are strong influences on water reflectance levels as detected by ERTS-1 and can suppress the contributions of true water quality factors. Band ratios, on the other hand, exhibit very little dependence on sun angle and sky conditions and thus are more directly related to water quality. Band ratio levels can be used to reliably determine suspended load. Other water quality indicators appear to have little or no affect on reflectance levels.

Yarger, H. L.↗

Census Cities experiment in urban change detection

The author has identified the following significant results. Mapping of 1970 and 1972 land use from high-flight photography has been completed for all test sites: San Francisco, Washington, Phoenix, Tucson, Boston, New Haven, Cedar Rapids, and Pontiac. Area analysis of 1970 and 1972 land use has been completed for each of the mandatory urban areas. All 44 sections of the 1970 land use maps of the San Francisco test site have been officially released through USGS Open File at 1:62,500. Five thousand copies of the Washington one-sheet color 1970 land use map, census tract map, and point line identification map are being printed by USGS Publication Division. ERTS-1 imagery for each of the eight test sites is being received and analyzed. Color infrared photo enlargements at 1:100,000 of ERTS-1 MSS images of Phoenix taken on October 16, 1972 and May 2, 1973 are being analyzed to determine to what level land use and land use changes can be identified and to what extent the ERTS-1 imagery can be used in updating the 1970 aircraft photo-derived land use data base. Work is proceeding on the analysis of ERTS-1 imagery by computer manipulation of ERTS-1 MSS data in digital format. ERTS-1 CCT maps at 1:24,000 are being analyzed for two dates over Washington and Phoenix. Anniversary tape sets have been received at Purdue LARS for some additional urban test sites.

Wray, J. R.↗

Automated land-use mapping from spacecraft data

The author has identified the following significant results. In response to the need for a faster, more economical means of producing land use maps, this study evaluated the suitability of using ERTS-1 computer compatible tape (CCT) data as a basis for automatic mapping. Significant findings are: (1) automatic classification accuracy greater than 90% is achieved on categories of deep and shallow water, tended grass, rangeland, extractive (bare earth), urban, forest land, and nonforested wet lands; (2) computer-generated printouts by target class provide a quantitative measure of land use; and (3) the generation of map overlays showing land use from ERTS-1 CCTs offers a significant breakthrough in the rate at which land use maps are generated. Rather than uncorrected classified imagery or computer line printer outputs, the processing results in geometrically-corrected computer-driven pen drawing of land categories, drawn on a transparent material at a scale specified by the operator. These map overlays are economically produced and provide an efficient means of rapidly updating maps showing land use.

Chase, P. E.↗

Automated strip-mine and reclamation mapping from ERTS

The author has identified the following significant results. Computer processing techniques were applied to ERTS-1 computer-compatible tape (CCT) data acquired in August 1972 on the Ohio Power Company's coal mining operation in Muskingum County, Ohio. Processing results succeeded in automatically classifying, with an accuracy greater than 90%: (1) stripped earth and major sources of erosion; (2) partially reclaimed areas and minor sources of erosion; (3) water with sedimentation; (4) water without sedimentation; and (5) vegetation. Computer-generated tables listing the area in acres and square kilometers were produced for each target category. Processing results also included geometrically corrected map overlays, one for each target category, drawn on a transparent material by a pen under computer control. Each target category is assigned a distinctive color on the overlay to facilitate interpretation. The overlays, drawn at a scale of 1:250,000 when placed over an AMS map of the same area, immediately provided map locations for each target. These mapping products were generated at a tenth of the cost of conventional mapping techniques.

Rogers, R. H.↗

Multispectral signatures in relation to ground control signature using nested sampling approach

The author has identified the following significant results. In a cooperative study with USGS personnel, it has been possible to detect a 1.5 by 1 mile anomaly on ERTS CCT data, in the pine-covered mountains of western Nevada. This anomalous area is about 3-5 times larger than that of the known geobotanical anomaly which lies centrally within the area. The site has been studied on the ground and bi-directional reflectances, relative to BaS04 obtained for 40 trees, using both in-vivo techniques (similar to cherry picker operations) and field determinations of cut branches. The anomaly can be seen best by color transparencies made from 5/4, 6/4, 7/4 ratioed digital data, the 3 ratios each being coded by one of 3 colors (blue, green, and red).

Lyon, R. J. P.↗

Skylab study of water quality

The author has identified the following significant results. Analysis of S-190A imagery from 1 EREP pass over 3 reservoirs in Kansas establishes a strong linear correlation between the red/green radiance ratio and suspended solids. This result compares quite favorably to ERTS MSS CCT results. The linear fits RMS for Skylab is 6 ppm as compared to 12 ppm for ERTS. All of the ERTS satellite passes yielded fairly linear results with typical RMS values of 12 ppm. However, a few of the individual passes did yield RMS values of 5 or 6 ppm which is comparable to the one Skylab pass analyzed. In view of the cloudy conditions in the Skylab photos, yet good results, the indications are that S-190A may do somewhat better than the ERTS MSS in determining suspended load. More S-190A data is needed to confirm this. As was the case with the ERTS MSS, the Skylab S-190A showed no strong correlation with other water quality parameters. S-190B photos because of their high resolution can provide much first look information regarding relative degrees of turbidity within various parts of large lakes and among smaller bodies of water.

Yarger, H. L.↗