Search NASA⌕ Search

SEARCH · Search NASA

Results for “CFS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Summertime Continental Shallow Cumulus Cloud Detection Using GOES‐16 Satellite and Ground‐Based Ceilometer at North Alabama

Abstract Accurate simulations of boundary layer cloud processes remain challenging in Earth system modeling. Observations are essential to evaluate and improve models of such processes. This study introduces a comprehensive validation framework for a satellite‐based detection algorithm of continental shallow cumulus (ShCu) clouds during the daytime, which was initially developed using ground‐based observations of stereo cameras at the Department of Energy Atmospheric Radiation Measurement (ARM) Southern Great Plains site (J. Tian et al., 2021, https://doi.org/10.3390/rs13122309 , 2022, https://doi.org/10.1029/2021gl097070 ). To validate this algorithm, the framework employs ground‐based ceilometer measurements from North Alabama (NA) where ShCu populations are prevalent. This study first generates clear‐sky surface reflectance maps at NA and identifies ShCu pixels with a detection threshold using Geostationary Operational Environmental Satellite (GOES) reflectance data. The obtained cloud fractions (CFs) are then compared against CFs from a ground‐based ceilometer, considering factors such as observed area differences, satellite parallax issue, and systematic biases. We found that with a detection threshold (∆R) of 0.05, the ShCu detection algorithm is effective for NA, enabling the reproduction of hourly ShCu CFs using GOES. Our framework is straightforward and easily repeatable to evaluate the effectiveness of a ∆R threshold for detecting ShCu clouds in various geographic regions where ceilometers are deployed. This satellite detection of ShCu provides a crucial regional context for ground‐based measurements, facilitating the tracking of convection initiation and its coupling with land surface conditions. Integrating localized ground‐based and regional satellite data will enhance our ability to conduct thorough studies of cloud morphology and land‐atmosphere interactions in North Alabama.

54 ENVIRONMENTAL SCIENCES↗

Fractional quantum Hall valley ferromagnetism in the extreme quantum limit

Electrons' multiple quantum degrees of freedom can lead to rich physics, including a competition between various exotic ground states, as well as novel applications such as spintronics and valleytronics. Here we report magnetotransport experiments demonstrating how the valley degree of freedom impacts the fractional quantum states (FQHSs), and the related magnetic-flux-electron composite fermions (CFs), at very high magnetic fields in the extreme quantum limit when only the lowest Landau level is occupied. Unlike in other multivalley two-dimensional electron systems such as Si or monolayer graphene and transition-metal dichalcogenides, in our AlAs sample we can continuously tune the valley polarization via the application of in situ strain. We find that the FQHSs remain exceptionally strong even as they make valley polarization transitions, revealing a surprisingly robust ferromagnetism of the FQHSs and the underlying CFs. Our observation implies that the CFs are strongly interacting in our system. In conclusion, we are also able to obtain a phase diagram for the FQHS and CF valley polarization in the extreme quantum limit as we monitor transitions of the FHQSs with different valley polarizations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Particle-hole mirror symmetries around the half-filled shell: Quantum numbers and algebraic structure of composite fermions

Composite fermions (CFs) of the fractional quantum Hall effect (FQHE) are described as spherical products of electron and vortex spinors, built from underlying 𝐿=1/2 ladder operators aligned so that the spinor angular momenta, 𝐿 𝑒 and 𝐿 𝑣 , are maximal. We identify the CF's quantum numbers as the angular momentum 𝐿 in (𝐿𝑒⁢𝐿𝑣)⁢𝐿, its magnetic projection 𝑚𝐿, the electron number 𝑁 [𝐿 𝑣 =(𝑁−1)/2], and magnetic 𝜈 spin, 𝑚 𝜈 = 𝐿 𝑒 −𝐿 𝑣 . Translationally invariant FQHE states are formed by fully filling 𝑝 subshells with their respective CFs, in order of ascending 𝐿 for fixed 𝐿 𝑒 and 𝐿 𝑣 , beginning with the lowest allowed value, 𝐿=|⁢𝑚 𝜈 |. CF subshells are contained entirely within the first Landau level (FLL). Alternatively, we provide an equivalent hierarchical wave function in which the underlying objects are vortices with 𝐿 𝑣 = $\frac{p}{2}$, correlated. Here, we show that CFs can be written as a valence operator carrying the angular momentum quantum numbers 𝐿, 𝑚 𝜈 , 𝑚 𝐿 acting on a scalar half-filled intrinsic state.

2-dimensional systems↗

Oscillations and instabilities of fast and differentially rotating relativistic stars

We study nonaxisymmetric oscillations of rapidly and differentially rotating relativistic stars in the Cowling approximation. Our equilibrium models are sequences of relativistic polytropes, where the differential rotation is described by the relativistic j-constant law. We show that a small degree of differential rotation raises the critical rotation value for which the quadrupolar f-mode becomes prone to the Chandrasekhar-Friedman-Schutz (CFS) instability, while the critical value of T/|W| at the mass-shedding limit is raised even more. For stiffer equations of state these effects are even more pronounced. When increasing differential rotation further to a high degree, the neutral point of the CFS instability first reaches a local maximum and is lowered afterwards. For stars with a rather high compactness we find that for a large degree of differential rotation the absolute value of the critical T/|W| is below the corresponding value for rigid rotation. We conclude that the onset of the CFS instability is eased for a small degree of differential rotation and for a large degree at least in stars with a higher compactness. Moreover, we were able to extract the eigenfrequencies and the eigenfunctions of r-modes for differentially rotating stars and our simulations show a good qualitative agreement with previous Newtonian results.

79 ASTRONOMY AND ASTROPHYSICS↗

SU-F-T-274: Modified Dose Calibration Methods for IMRT QA

Purpose: To investigate IMRT QA uncertainties caused by dose calibration and modify widely used dose calibration procedures to improve IMRT QA accuracy and passing rate. Methods: IMRT QA dose measurement is calibrated using a calibration factor (CF) that is the ratio between measured value and expected value corresponding to the reference fields delivered on a phantom. Two IMRT QA phantoms were used for this study: a 30×30×30 cm3 solid water cube phantom (Cube), and the PTW Octavius phantom. CF was obtained by delivering 100 MUs to the phantoms with different reference fields ranging from 3×3 cm2 to 20×20 cm{sup 2}. For Cube, CFs were obtained using the following beam arrangements: 2-AP Field - chamber at dmax, 2-AP Field - chamber at isocenter, 4-beam box - chamber at isocenter, and 8 equally spaced fields and chamber at isocenter. The same plans were delivered on Octavius and CFs were derived for the dose at the isocenter using the above beam arrangements. The Octavius plans were evaluated with PTW-VeriSoft (Gamma criteria of 3%/3mm). Results: Four head and neck IMRT plans were included in this study. For point dose measurement with Cube, the CFs with 4-Field gave the best agreement between measurement and calculation within 4% for large field plans. All the measurement results agreed within 2% for a small field plan. Compared with calibration field sizes, 5×5 to 15×15 were more accurate than other field sizes. For Octavius, 4-Field calibration increased passing rate by up to 10% compared to AP calibration. Passing rate also increased by up to 4% with the increase of field size from 3×3 to 20×20. Conclusion: IMRT QA results are correlated with calibration methods used. The dose calibration using 4-beam box with field sizes from 5×5 to 20×20 can improve IMRT QA accuracy and passing rate.

60 APPLIED LIFE SCIENCES↗

jacobteter/CropWatR

Biofuels policies induce land use changes (LUC), including cropland expansion and crop switching, and this in turn alters water and soil management practices. Policies differ in the extent and type of land use changes they induce and therefore in their impact on water resources. We quantify and compare the spatially varying water impacts of biofuel crops stemming from LUC induced by two different biofuels policies by coupling a biophysical model with an economic model to simulate the economically viable mix of crops, land uses, and crop management choices under alternative policy scenarios. We assess the outputs of an economic model with a high-resolution crop-water model for major agricultural crops and potential cellulosic feedstocks in the US to analyze the impacts of three alternative policy scenarios on water balances: a counterfactual ‘no-biofuels policy’ (BAU) scenario, a volumetric mandate (Mandate) scenario, and a clean fuel-intensity standard (CFS) scenario incentivizing fuels based on their carbon intensities. While both biofuel policies incentivize more biofuels than in the counterfactual, they differ in the mix of corn ethanol and advanced biofuels from miscanthus and switchgrass (more corn ethanol in Mandate and more cellulosic biofuels in CFS). The two policies differ in their impact on irrigated acreage, irrigation demand, groundwater use and runoff. Net irrigation requirements increase 0.7% in Mandate and decrease 3.8% in CFS, but in both scenarios increases are concentrated in regions of Kansas and Nebraska that rely upon the Ogallala aquifer for irrigation water. Our study illustrates the importance of accounting for the overall LUC and shifts in agricultural production and management practices in response to policies when assessing the water impacts of biofuels.

Teter, Jacob↗

Water impacts of U.S. biofuels: Insights from an assessment combining economic and biophysical models

Biofuels policies induce land use changes (LUC), including cropland expansion and crop switching, and this in turn alters water and soil management practices. Policies differ in the extent and type of land use changes they induce and therefore in their impact on water resources. We quantify and compare the spatially varying water impacts of biofuel crops stemming from LUC induced by two different biofuels policies by coupling a biophysical model with an economic model to simulate the economically viable mix of crops, land uses, and crop management choices under alternative policy scenarios. We assess the outputs of an economic model with a high-resolution crop-water model for major agricultural crops and potential cellulosic feedstocks in the US to analyze the impacts of three alternative policy scenarios on water balances: a counterfactual ‘no-biofuels policy’ (BAU) scenario, a volumetric mandate (Mandate) scenario, and a clean fuel-intensity standard (CFS) scenario incentivizing fuels based on their carbon intensities. While both biofuel policies incentivize more biofuels than in the counterfactual, they differ in the mix of corn ethanol and advanced biofuels from miscanthus and switchgrass (more corn ethanol in Mandate and more cellulosic biofuels in CFS). The two policies differ in their impact on irrigated acreage, irrigation demand, groundwater use and runoff. Net irrigation requirements increase 0.7% in Mandate and decrease 3.8% in CFS, but in both scenarios increases are concentrated in regions of Kansas and Nebraska that rely upon the Ogallala aquifer for irrigation water. Our study illustrates the importance of accounting for the overall LUC and shifts in agricultural production and management practices in response to policies when assessing the water impacts of biofuels.

09 BIOMASS FUELS↗

Simulation of Columbia River Floods in the Hanford Reach

Columbia River water elevations and flows in the Hanford Reach affect the environment and facilities along the shoreline, including movement of contaminants in groundwater, fish habitat, and infrastructure subject to flooding. This report describes the hydraulic simulation of hypothetical flood flows using the best available topographic and bathymetric data for the Hanford Reach and the Modular Aquatic Simulation System in 1 Dimension (MASS1) hydrodynamic model. The MASS1 model of the Hanford Reach was previously calibrated to field measurements of water surface elevations. The current model setup can be used for other studies of flow, water levels, and temperature in the Reach. The existing MASS1 channel geometry and roughness and other model configuration inputs for the Hanford Reach were used for this study, and previous calibration and validation results for the model are reprinted here for reference. The flood flows for this study were simulated by setting constant flow rates obtained from the U.S. Army Corps of Engineers (USACE) for the Columbia, Snake, and Yakima Rivers, and a constant water level at McNary Dam, and then running the model to steady state. The discharge levels simulated were all low-probability events; for example, a 100-year flood is one that would occur on average every 100 years, or put another way, in any given year there is a 1% chance that a discharge of that level or higher will occur. The simulated floods and their corresponding Columbia River discharges were 100-year (445,000 cfs), 500-year (520,000 cfs), and the USACE-defined Standard Project Flood (960,000 cfs). The resulting water levels from the steady-state floods can be viewed as “worst case” outcomes for the respective discharge levels. The MASS1 output for water surface elevations was converted to the North American Vertical Datum of 1988 and projected across the channel and land surface to enable mapping of the floodplain for each scenario. Floodplain maps show that for the 100-year and 500-year discharge levels, flooding is mainly confined to the topographic trench that is the river channel. The flooded area for the Standard Project Flood extends out of the channel area in some places, particularly in the 100-F Area. All of the output from the simulations have been archived and are available for future investigations in the Hanford Reach.

54 ENVIRONMENTAL SCIENCES↗

Biofuels and Food Security. A report by the High Level Panel of Experts on Food Security and Nutrition

In October 2011, the UN Committee on World Food Security (CFS) recommended a ''review of biofuels policies -- where applicable and if necessary -- according to balanced science-based assessments of the opportunities and challenges that they may represent for food security so that biofuels can be produced where it is socially, economically and environmentally feasible to do so''. In line with this, the CFS requested the HLPE (High Level Panel of Experts) to ''conduct a science-based comparative literature analysis taking into consideration the work produced by the FAO and Global Bioenergy Partnership (GBEP) of the positive and negative effects of biofuels on food security''. Recommendations from the report include the following. Food security policies and biofuel policies cannot be separated because they mutually interact. Food security and the right to food should be priority concerns in the design of any biofuel policy. Governments should adopt the principle: biofuels shall not compromise food security and therefore should be managed so that food access or the resources necessary for the production of food, principally land, biodiversity, water and labour are not put at risk. The CFS should undertake action to ensure that this principle is operable in the very varied contexts in which all countries find themselves. Given the trend to the emergence of a global biofuels market, and a context moving from policy-driven to market-driven biofuels, there is an urgent need for close and pro-active coordination of food security, biofuel/bioenergy policies and energy policies, at national and international levels, as well as rapid response mechanisms in case of crisis. There is also an urgent need to create an enabling, responsible climate for food and non-food investments compatible with food security. The HLPE recommends that governments adopt a coordinated food security and energy security strategy, which would require articulation around the following five axes/dimensions: Adapt to the change to global, market-driven dynamics; Address the land, water and resource implications of biofuel policies; Foster the transition from biofuels to comprehensive food-energy policies; Promote research and development; and, Develop methods and guidelines for coordinated food, Biofuels, and bio-energy policies at national and international levels.

09 BIOMASS FUELS↗

Tuning Microstructure of Mesophase Pitch Carbon Fiber by Altering the Carbonization Ramp Rate

The microstructure of mesophase pitch carbon fibers (CFs) are tuned by varying ramp rates from 1 to 50 °C min –1 up to 1000 °C to study the effect of ramp rate on CFs’ microstructure, thermal and mechanical properties with the goal of offsetting the cost by decreasing cycle time. The ramp rates represent carbonization times ranging from 16.4 to 1.17 h, not including cool down. Differential scanning calorimetry, thermogravimetric analysis, and derivative thermogravimetry are used to investigate the impact ramp rate has on the thermal properties of mesophase pitch. It is found that lower ramp rates are endothermic in nature with a lower temperature onset and maximum weight loss. Higher ramp rates possess an exothermic nature with higher temperatures resulting in maximal weight loss over a smaller range of temperatures. Mechanical testing shows varying CF strengths and moduli dependent on ramp rate and an optimized process is developed to produce the strongest CF. Furthermore, microstructural characterization revealed that faster ramp rates lead to smaller interplanar spacings and larger crystallites but possessed greater disorder.

36 MATERIALS SCIENCE↗

Functional Genomics of Serotonin Receptor 2A (HTR2A) : Interaction of Polymorphism, Methylation, Expression and Disease Association

Serotonergic neurotransmission plays a key role in the pathophysiology of neuropsychiatric illnesses. The functional significance of a promoter polymorphism, -1438G/A (rs6311), in one of the major genes of this system (serotonin receptor 2A, HTR2A) remains poorly understood in the context of epigenetic factors, transcription factors and endocrine influences. We used functional and structural equation modeling (SEM) approaches to assess the contributions of the polymorphism (rs6311), DNA methylation and clinical variables to HTR2A expression in chronic fatigue syndrome (CFS) subjects from a population-based study. HTR2A was up-regulated in CFS through allele-specific expression modulated by transcription factors at critical sites in its promoter: an E47 binding site at position -1,438, (created by the A-allele of rs6311 polymorphism), a glucocorticoid receptor (GR) binding site encompassing a CpG at position -1,420, and Sp1 binding at CpG methylation site -1,224. Methylation at -1,420 was strongly correlated with methylation at -1,439, a CpG site that is dependent upon the G-allele of rs6311 at position -1,438. SEM revealed a strong negative interaction between E47 and GR binding (in conjunction with cortisol level) on HTR2A expression. This study suggests that the promoter polymorphism (rs6311) can affect both transcription factor binding and promoter methylation, and this along with an individual’s stress response can impact the rate of HTR2A transcription in a genotype and methylation-dependent manner. This study can serve as an example for deciphering the molecular determinants of transcriptional regulation of major genes of medical importance by integrating functional genomics and SEM approaches. Confirmation in an independent study population is required.

59 BASIC BIOLOGICAL SCIENCES↗

Analysis of the turbostratic structures in PAN-based carbon fibers with wide-angle x-ray diffraction

Carbon fiber (CF) is a versatile material renowned for its excellent mechanical, thermal, and electrical properties. Polyacrylonitrile (PAN)-based CFs dominate the market due to their high tensile strength, rendering them suitable for structural applications in a wide variety of applications ranging from sporting goods to aerospace. Over five decades of commercial development of PAN-based CF has resulted in a range of varieties with different tensile moduli and tensile strengths. The microstructures, nanostructures, and crystal structures of PAN-based CF play pivotal roles in the macroscale properties of this material. In particular, the crystal structure and crystallite orientation in CF is closely related to the mechanical properties. The crystal structure of PAN-based CF generally consists of turbostratic carbon, which is a disordered form of graphite, the characteristics of which can be effectively characterized in a bulk format through wide-angle x-ray diffraction (WAXD). In this work, we employed a three-part approach to the analysis of WAXD patterns collected from four intermediate modulus PAN-based CFs. The approach incorporates a Scherrer analysis, a Debye analysis, and an orientational analysis to provide precise estimates of crystallite sizes, crystallite distributions, and crystallite orientations with the fiber axis. Furthermore, the results presented here suggest that intermediate modulus PAN-based CF mostly consists of small turbostratic crystallites (<4 nm), with larger crystallites having increased orientation with the fiber axis. The results here imply the presence of curvature and/or wrinkling of the turbostratic layers within the CF structure.

36 MATERIALS SCIENCE↗

Thermal performance of phase change materials with anisotropic carbon fiber inserts

In thermal energy storage systems, phase change materials (PCMs) are widely used for thermal energy management. Most PCMs have low thermal conductivities, which limits the heat transfer rate within PCM and thus makes the phase-changing process very slow. However, thermal conductivities of PCMs can be altered by inserting targeted additives. We hypothesize that the size and shape of these additive inserts play a key role in thermal management efficiency. To this end, the impacts of carbon fiber (CF) inserts on the phase change behavior and consequent heat transfer efficiencies of inorganic and organic PCMs were investigated using experiments and simulations. Long, anisotropic CFs with high thermal conductivities formed continuous fast heat flux tunnels inside PCMs to enhance the heat transfer. Such CFs could extend the phase change fronts from the limited container-shaped interface to the larger surface of numerous CF inserts inside the PCM. These special CF inserts work with a new heat transfer mechanism, different from conventional small additives or long isotropic CF inserts. The thermal energy release rate increased by 2.5 times with 1 wt.% anisotropic CF inserts in inorganic PCM. However, CF inserts in liquid organic PCM hindered the natural convection and compromised the improved heat conduction. In conclusion, the lab-scale multiphysics simulations support these experimental observations and indicate that CF inserts have potential to enhance heat transfer in inorganic PCMs, but they are less effective in organic PCMs.

25 ENERGY STORAGE↗

Characterization factors and other air quality impact metrics: Case study for PM 2.5 -emitting area sources from biofuel feedstock supply

In this paper, we develop a framework and metrics for estimating the impact of emission sources on regulatory compliance and human health for applications in air quality planning and life cycle impact assessment (LCIA). Our framework is based on a pollutant's characterization factor (CF) and three new metrics: Available Regulatory Capacity for Incremental Emissions (ARCIE), Source CF Ratio, and Activity Health Impact (AHI) Ratio. ARCIE can be used to assess whether a receptor location has capacity to accommodate additional source emissions while complying with regulatory limits. We present CF as a midpoint indicator of health impacts per unit mass of emitted pollutant. Source CF Ratio enables comparison of potential new-source locations based on human health impacts. The AHI Ratio estimates the health impacts of a pollutant in relation to the utilization of the source for each unit of product or service. These metrics can be applied to any pollutant, energy source sector (e.g., agriculture, electricity), source type (point, line, area), and spatial modeling domain (nation, state, city, region). We demonstrate these metrics through a case study of fine particulate (PM 2.5 ) emissions from U.S. corn stover harvesting and local processing at various scales, representing steps in the biofuel production process. We model PM 2.5 formation in the atmosphere using a novel reduced-complexity chemical transport model called the Intervention Model for Air Pollution (InMAP). Through this case study, we present the first area-source PM 2.5 CFs that address the recommendations of several LCIA studies to establish spatially explicit CFs specific to an energy source sector or type. Overall, the framework developed in this work provides multiple new ways to consider the potential impacts of air emissions through spatially differentiated metrics.

09 BIOMASS FUELS↗

ARC disruption physics and strategy

Commonwealth Fusion Systems (CFS) plans to operate a tokamak power plant called ARC in the early 2030s. Tokamak plasmas have stability limits that, if crossed, lead to a rapid termination of the plasma, referred to as a disruption. Disruptions pose a melt risk to the first wall resulting from thermal and non-thermal particle heat fluxes, and an electromagnetic loading risk on all metal components within the equilibrium coils. A comprehensive set of models is used herein to provide an assessment of both mitigated and unmitigated ARC disruption loads. A preliminary massive gas injection system is baselined and a runaway electron mitigation coil option is proposed to close possible gaps in the baseline. It is predicted that all ARC disruption loads are within a factor of 2 of the disruption loads in SPARC, a tokamak presently under construction by CFS, and therefore SPARC provides an opportunity to calibrate models, test solutions and inform the design of ARC. The goal for ARC is disruption-free operation, however, the pragmatic design target is to withstand one mitigated disruption per day, and to restart the plasma following mitigation in tens of seconds without interrupting the power output. Unmitigated disruptions must be rare, and experience with unmitigated disruption impacts in SPARC will better define what rare means. The implications of this strategy for plasma disruptivity and disruption prediction are discussed, and operating the ARC scenario on SPARC is expected to refine the ARC final design and operational plan.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Expanding the Ambient-Pressure Phase Space of CaFe 2 O 4 -Type Sodium Postspinel Host–Guest Compounds

CaFe 2 O 4 -type sodium postspinels (Na-CFs), with Na + occupying tunnel sites, are of interest as prospective battery electrodes. While many compounds of this structure type require high-pressure synthesis, several compounds are known to form at ambient pressure. Here we report a large expansion of the known Na-CF phase space at ambient pressure, having successfully synthesized NaCrTiO 4 , NaRhTiO 4 , NaCrSnO 4 , NaInSnO 4 , NaMg 0.5 Ti 1.5 O 4 , NaFe 0.5 Ti 1.5 O 4 , NaMg 0.5 Sn 1.5 O 4 , NaMn 0.5 Sn 1.5 O 4 , NaFe 0.5 Sn 1.5 O 4 , NaCo 0.5 Sn 1.5 O 4 , NaNi 0.5 Sn 1.5 O 4 , NaCu 0.5 Sn 1.5 O 4 , NaZn 0.5 Sn 1.5 O 4 , NaCd 0.5 Sn 1.5 O 4 , NaSc 1.5 Sb 0.5 O 4 , Na 1.16 In 1.18 Sb 0.66 O 4 , and several solid solutions. In contrast to earlier reports, even cations that are strongly Jahn–Teller active (e.g., Mn 3+ and Cu 2+ ) can form Na-CFs at ambient pressure when combined with Sn 4+ rather than with the smaller Ti 4+ . Order and disorder are probed at the average and local length-scales with synchrotron powder X-ray diffraction and solid-state NMR spectroscopy. Strong ordering of framework cations between the two framework sites is not observed, except in the case of Na 1.16 In 1.18 Sb 0.66 O 4 . This compound is the first example of an Na-CF that contains Na + in both the tunnel and framework sites, reminiscent of Li-rich spinels. Trends in the thermodynamic stability of the new compounds are explained on the basis of crystal-chemistry and density functional theory (DFT). Further DFT calculations examine the relative stability of the CF versus spinel structures at various degrees of sodium extraction in the context of electrochemical battery reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of Dynamically and Statistically Downscaled Seasonal Climate Forecasts for the Cold Season over the United States

This study compares two approaches, dynamical and statistical downscaling, for their potential to improve regional seasonal forecasts for the United States (U.S.) during the cold season. In the MultiRCM Ensemble Downscaling (MRED) project, seven regional climate models (RCMs) are used to dynamically downscale the Climate Forecast System (CFS) seasonal prediction over the conterminous U.S. out to 5 months for the period of 1982–2003. The simulations cover December to April of next year with 10 ensemble members from each RCM with different initial and boundary conditions from the corresponding ensemble members. These dynamically downscaled forecasts are compared with statistically downscaled forecasts produced by two bias correction methods applied to both the CFS and RCM forecasts. Results of the comparison suggest that the RCMs add value in seasonal prediction application, but the improvements largely depend on location, forecast lead time, variables, and skill metrics used for evaluation. Generally, more improvements are found over the Northwest and North Central U.S. for the shorter lead times. The comparison results also suggest a hybrid forecast system that combines both dynamical and statistical downscaling methods have the potential to maximize prediction skill.

Comparison, cold season, downscaled, seasonal, cli↗

Seeking Repeating Anthropogenic Seismic Sources: Implications for Seismic Velocity Monitoring at Fault Zones

Abstract Seismic velocities in rocks are highly sensitive to changes in permanent deformation and fluid content. The temporal variation of seismic velocity during the preparation phase of earthquakes has been well documented in laboratories but rarely observed in nature. It has been recently found that some anthropogenic, high‐frequency (>1 Hz) seismic sources are powerful enough to generate body waves that travel down to a few kilometers and can be used to monitor fault zones at seismogenic depth. Anthropogenic seismic sources typically have fixed spatial distribution and provide new perspectives for velocity monitoring. In this work, we propose a systematic workflow to seek such powerful seismic sources in a rapid and straightforward manner. We tackle the problem from a statistical point of view, considering that persistent, powerful seismic sources yield highly coherent correlation functions (CFs) between pairs of seismic sensors. The algorithm is tested in California and Japan. Multiple sites close to fault zones show high‐frequency CFs stable for an extended period of time. These findings have great potential for monitoring fault zones, including the San Jacinto Fault and the Ridgecrest area in Southern California, Napa in Northern California, and faults in central Japan. However, extra steps, such as beamforming or polarization analysis, are required to determine the dominant seismic sources and study the source characteristics, which are crucial to interpreting the velocity monitoring results. Train tremors identified by the present approach have been successfully used for seismic velocity monitoring of the San Jacinto Fault in previous studies.

58 GEOSCIENCES↗