Search NASA⌕ Search

SEARCH · Search NASA

Results for “CLATHRATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Binary Alkali-Metal Silicon Clathrates by Spark Plasma Sintering: Preparation and Characterization

The binary intermetallic clathrates K 8-x Si 46 (x = 0.4; 1.2), Rb 6.2 Si 46 , Rb 11.5 Si 136 and Cs 7.8 Si 136 were prepared from M 4 Si 4 (M = K, Rb, Cs) precursors by spark-plasma route (SPS) and structurally characterized by Rietveld refinement of PXRD data. The clathrate-II phase Rb 11.5 Si 136 was synthesized for the first time. Partial crystallographic site occupancy of the alkali metals, particularly for the smaller Si 20 dodecahedra, was found in all compounds. SPS preparation of Na 24 Si 136 with different SPS current polarities and tooling were performed in order to investigate the role of the electric field on clathrate formation. The electrical and thermal transport properties of K 7.6 Si 46 and K 6.8 Si 46 in the temperature range 4–700 K were investigated. Our findings demonstrate that SPS is a novel tool for the synthesis of intermetallic clathrate phases that are not easily accessible by conventional synthesis techniques.

36 MATERIALS SCIENCE↗

Synthesis and Structural Characterization of Novel Intermetallic Clathrates – Prospective Materials for Thermoelectric Applications

The overall objective of the project is to contribute to the development of the fundamental chemistry and physics of new intermetallic clathrates (open framework materials) that can find applications in solid-state energy conversion. Such materials are termed thermoelectric materials and they possess the unique property that a temperature gradient induces a separation of charge in them. Thermoelectric materials are of great practical importance because of their potential for widespread applications in power generation or in cooling devices. Recently, new complex inorganic materials with open framework structures, such as skutterudites and clathrates have been suggested to be a breakthrough in the thermoelectric energy conversion. The basic hypothesis for the thermoelectric properties of such “host-guest” structures is that the conducting host-framework provides a high Seebeck coefficient (S) and electrical conductivity (σ), while low-lying optical modes, associated with the vibration of the guest-atoms, hybridize with the acoustic modes. The proposed interdisciplinary efforts are the initial part of a broader, collaborative program to investigate the structure-bonding-properties relationships in related intermetallic compounds. More specifically, our work is aimed at: 1. Comprehensive and systematic investigations of the crystal chemistry and stoichiometry breadth of new semiconducting clathrates with the type-II or type-III structures. 2. Precise determination of the composition with minimum occupancy of the cages, needed for the thermodynamic stability of the clathrate framework, coupled with investigations to verify the possibility of “rattling” atoms inside the open-framework structure. 3. Extensive physical property measurements (S, σ, k, R H , C p , $\chi_{m}$). Ultimately, this new phenomenology will be used as a foundation for the rational tuning of potentially interesting properties of the newly synthesized materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Lanthanum‐Filled Carbon–Boron Clathrate

Abstract We report a carbon‐boron clathrate with composition 2 La@B 6 C 6 (LaB 3 C 3 ). Like recently reported SrB 3 C 3 , [1] single‐crystal X‐ray diffraction and computational modelling indicate that the isostructural La member crystallizes in the cubic bipartite sodalite structure (Type‐VII clathrate) with La atoms encapsulated within truncated octahedral cages composed of alternating carbon and boron atoms. The covalent nature of the B−C bonding results in a hard, incompressible framework, and owing to the balanced electron count, La 3+ [B 3 C 3 ] 3− exhibits markedly improved pressure stability and is a semiconductor with an indirect band gap predicted near 1.3 eV. A variety of different guest atoms may potentially be substituted within Type‐VII clathrate cages, presenting opportunities for a large family of boron‐stabilized, carbon‐based clathrates with ranging physical properties.

Strobel, Timothy A.↗

New Trick for an Old Dog: From Prediction to Properties of “Hidden Clathrates” Ba 2 Zn 5 As 6 and Ba 2 Zn 5 Sb 6

The zinc–antimony phase space has been heavily investigated due to the structural complexity and abundance of high-performing thermoelectric materials. Consequentially, the desire to use zinc and antimony as framework elements to encage rattling cations and achieve phonon-glass-electron-crystal-type properties has remained an enticing goal with only two alkali metal clathrates to date, Cs 8 Zn 18 Sb 28 and K 58 Zn 122 Sb 207 . Guided by Zintl electron-counting predictions, here we explored the Ba–Zn–Pn (Pn = As, Sb) phase space proximal to the expected composition of the type-I clathrate. In situ powder X-ray diffraction studies revealed two “hidden” compounds which can only be synthesized in a narrow temperature range. The ex situ synthesis and crystal growth unveiled that instead of type-I clathrates, compositionally close but structurally different new clathrate-like compounds formed, Ba 2 Zn 5 As 6 and Ba 2 Zn 5 Sb 6 . These materials crystallize in a unique structure, in the orthorhombic space group Pmna with the Wyckoff sequence i 2 h 6 gfe. Single-phase synthesis enabled the exploration of their transport properties. Rattling of the Ba cations in oversized cages manifested low thermal conductivity, which, coupled with the high Seebeck coefficients observed, are prerequisites for a promising thermoelectric material. Potential for further optimization of the thermoelectric performance by aliovalent doping was computationally analyzed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structure, and transport properties of Ba 8 Cu 16 – x Au x P 30 clathrate solid solution

In this work, a new clathrate solid solution Ba 8 Cu 16 – x Au x P 30 ( x = 4, 8, 12) was synthesized by a high-temperature solid-state annealing method. The crystal structures of Ba 8 Cu 16 – x Au x P 30 were determined by single crystal x-ray diffraction. This clathrate solid solution crystallizes in the orthorhombic superstructure of clathrate-I type with 23 crystallographically independent framework sites, eight of them are occupied by Au/Cu and 15 are exclusively occupied by P atoms. The distribution of Au and Cu atoms over these eight framework sites is not random with a clear preference for Au to occupy the largest (Au/Cu)P 4 tetrahedra in the framework. The thermal stability and thermoelectric properties of the Ba 8 Cu 16 – x Au x P 30 solid solution were evaluated. Low thermal conductivity was achieved for Ba 8 Cu 16 – x Au x P 30 due to the combination of the host–guest crystal structure with rattling Ba atoms with the presence of heavy Au atoms and substitutional Cu/Au disorder in the clathrate framework.

36 MATERIALS SCIENCE↗

Novel Hydrogen Clathrate Hydrate

We report a new hydrogen clathrate hydrate synthesized at 1.2 GPa and 298 K documented by single-crystal x-ray diffraction, Raman spectroscopy, and first-principles calculations. The oxygen sublattice of the new clathrate hydrate matches that of ice II, while hydrogen molecules are in the ring cavities, which results in the trigonal R3c or R¯3c space group (proton ordered or disordered, respectively) and the composition of ( H 2 O) 6 H 2 . Raman spectroscopy and theoretical calculations reveal a hydrogen disordered nature of the new phase $C$$^{'}_{1}$, distinct from the well-known ordered C 1 clathrate, to which this new structure transforms upon compression and/or cooling. Furthermore, this new clathrate phase can be viewed as a realization of a disordered ice II, unobserved before, in contrast to all other ordered ice structures.

36 MATERIALS SCIENCE↗

Extending tetrahedral network similarity to carbon: A type-I carbon clathrate stabilized by boron

Clathrates are guest/host framework compounds composed of polyhedral cages, yet despite their prevalence among tetrahedral network formers, clathrates with a carbon host lattice remain unrealized synthetic targets. Here, we report a type-I carbon-based framework—a ubiquitous clathrate structure type found throughout compounds containing tetrahedral building blocks. Following a boron-stabilization scheme based on first-principles predictions in the Ca–B–C system at high pressure, type-I Ca 8 B x C 46−x (x ≈ 9) was synthesized in the archetypal $Pm\bar{3}n$ lattice with stability derived from substitutionally disordered boron atoms on hexagonal ring framework positions. The synthesized clathrate, which is recoverable to ambient conditions, expands topological network similarity across tetrahedral systems and opens possibilities for a broad family of diamond-like, carbon-based compounds with tunable properties based on the wide potential for guest/host-atom substitutions and framework versatility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monoclinic 122-Type BaIr2Ge2 with a Channel Framework: A Structural Connection between Clathrate and Layered Compounds

A new 122-type phase, monoclinic BaIr2Ge2 is successfully synthesized by arc melting; X-ray diffraction and scanning electron microscopy are used to purify the phase and determine its crystal structure. BaIr2Ge2 adopts a clathrate-like channel framework structure of the monoclinic BaRh2Si2-type, with space group P21/c. Structural comparisons of clathrate, ThCr2Si2, CaBe2Ge2, and BaRh2Si2 structure types indicate that BaIr2Ge2 can be considered as an intermediate between clathrate and layered compounds. Magnetic measurements show it to be diamagnetic and non-superconducting down to 1.8 K. Different from many layered or clathrate compounds, monoclinic BaIr2Ge2 displays a metallic resistivity. Electronic structure calculations performed for BaIr2Ge2 support its observed structural stability and physical properties.

36 MATERIALS SCIENCE↗

Permanent Sequestration of Emitted Gases in the Form of Clathrate Hydrates

Underground sequestration has been proposed as a novel method of permanent disposal of harmful gases emitted into the atmosphere as a result of human activity. The method was conceived primarily for disposal of carbon dioxide (CO2, greenhouse gas causing global warming), but could also be applied to CO, H2S, NOx, and chorofluorocarbons (CFCs, which are super greenhouse gases). The method is based on the fact that clathrate hydrates (e.g., CO2 6H2O) form naturally from the substances in question (e.g., CO2) and liquid water in the pores of sub-permafrost rocks at stabilizing pressures and temperatures. The proposed method would be volumetrically efficient: In the case of CO2, each volume of hydrate can contain as much as 184 volumes of gas. Temperature and pressure conditions that favor the formation of stable clathrate hydrates exist in depleted oil reservoirs that lie under permafrost. For example, CO2-6H2O forms naturally at a temperature of 0 C and pressure of 1.22 MPa. Using this measurement, it has been calculated that the minimum thickness of continuous permafrost needed to stabilize CO2 clathrate hydrate is only about 100 m, and the base of the permafrost is known to be considerably deeper at certain locations (e.g., about 600 m at Prudhoe Bay in Alaska). In this disposal method, the permafrost layers over the reservoirs would act as impermeable lids that would prevent dissociation of the clathrates and diffusion of the evolved gases up through pores.

Duxbury, N.↗

On the Design of High Efficiency Thermoelectric Type I Clathrates through Transition Metal Doping

The lack of high efficiency thermoelectric materials hinders their deployment into wide ranging applications such as power generation from waste heat and solid state heating and cooling, which could lead to significant energy savings. Type I clathrates have recently been identified as prospective thermoelectric materials for power generation purposes due to their very low lattice thermal conductivity values. The maximum thermoelectric figure of merit of almost all type I clathrates is, however, less than 1; and occurs at, or above, 1000 K making them unfavorable especially for intermediate temperature applications. In this report, we demonstrate that transition metal doping introduces charge distortion and lattice defects into these materials which increases the ionized impurity scattering of carriers and point defect scattering of lattice phonons, respectively; leading to an enhanced power factor, reduced lattice thermal conductivity, and therefore improved thermoelectric figure of merit. Most importantly, the band gap of these materials can be tuned between 0.1 eV and 0.5 eV by adjusting the transition metal content, making it possible to design type I clathrates with excellent thermoelectric properties between 500 K and 1000 K.

36 MATERIALS SCIENCE↗

Thermoelectric Properties of Au- Containing Type-I Clathrates Ba8AuxGa16-3xGe30+2x

Type I clathrates, with compositions based on Ba8Ga16Ge30, are a class of promising thermoelectric materials due to their intrinsically low thermal conductivity. It has been demonstrated previously that the thermoelectric performance can be improved by transition metal substitution of the framework atoms. In this study, the effects of Au substitution for Ga/Ge on thermal and electrical transport properties of type I clathrate compounds have been investigated. Polycrystalline samples with a large range of Au content have been synthesized using conventional solid state techniques with the actual compositions of resulting materials approximately following Zintl-Klemm rules. The charge carrier type changes from electrons (n) to holes (p) as the Au content increases. The Seebeck coefficient (S) and power factor (S2/ where is the electrical resistivity) were improved by Au substitution and the resulting overall thermoelectric properties were enhanced by Au substitution with a thermoelectric figure of merit ZT ~ 0.63 at temperature T = 740 K for the composition Ba8Au5.47Ge39.96. The results presented herein show that Au-containing type I clathrates are promising p-type thermoelectric materials for high temperature applications.

Clathrates↗

Phase stability and chemical composition dependence of the thermoelectric properties of the type-I clathrate Ba{sub 8}Al{sub x}Si{sub 46-x} (8{<=}x{<=}15)

Phase stability of the type-I clathrate compound Ba{sub 8}Al{sub x}Si{sub 46-x} and the thermoelectric property dependence on chemical composition are presented. Polycrystalline samples were prepared by argon arc melting and annealing. Results of powder X-ray diffraction and electron microprobe analysis show that the type-I structure is formed without framework deficiency for 8{<=}x{<=}15. Lattice constant a increases linearly with the increase of x. Thermoelectric properties were measured for x=12, 14 and 15. The Seebeck coefficients are negative, with the absolute values increasing with x. The highest figure of merit zT=0.24 was observed for x=15 at T=1000 K, with carrier electron density n=3x10{sup 21} cm{sup -3}. A theoretical calculation based on the single parabolic band model reveals the optimum carrier concentration to be n{approx}4x10{sup 20} cm{sup -3}, where zT{approx}0.7 at T=1000 K is predicted. -- Graphical Abstract: Ba{sub 8}Al{sub x}Si{sub 46-x} is found to crystallize in the type-I clathrate structure without framework deficiency for 8{<=}x {<=}15. Thermoelectric figure of merit reaches zT=0.24 for x=15 at 1000 K, and calculation predicts zT{approx}0.7 for a lower carrier concentration. Display Omitted Highlights: {yields} Phase relation of the type-I clathrate Ba{sub 8}Al{sub x}Si{sub 46-x} is clarified. {yields} Thermoelectric performance becomes higher with the increase of Al content x. {yields} Low lattice thermal conductivity comparable to glasses is observed. {yields} Figure of merit zT=0.7 is predicted from calculation at the carrier concentration n{approx}4x10{sup 20} cm{sup -3}.

36 MATERIALS SCIENCE↗

HPHT synthesis, structure and electrical properties of type-I clathrates Ba{sub 8}Al{sub x}Si{sub 46−x}

Clathrate compounds Ba{sub 8}Al{sub x}Si{sub 46−x} were successfully synthesized using the method of high-pressure and high-temperature (HPHT). In this process, we used BaSi{sub 2} as one of the starting materials in place of Ba metals, which reduces the complexity of the program caused by the extremely high chemical reactivity. By using this method, the processing time was reduced from few days to an hour. X-ray diffraction and structural refinement indicated this composition crystallized in type-I clathrate phase. Bond length analysis showed the Ba atoms in small dodecahedron had spherical thermal ellipsoids while those in large tetrakaidecahedron displayed anisotropic thermal ellipsoids. The negative Seebeck coefficient indicated transport processes were dominated by electrons as carriers, and increased with the increasing temperature. The electrical properties, including Seebeck coefficient and Power factor, were greatly enhanced by Al substitution. - Graphical abstract: Left: The cavity structure diagram of a China-type large volume cubic high-pressure apparatus, and the Type-I clathrate structure of sample synthesized using HPHT. Middle: X-ray Rietveld refinement profile for Ba{sub 8}Si{sub 46} and element mapping for Ba{sub 8}Al{sub 16}Si{sub 30}. Right: Temperature dependence of Seebeck coefficient for Ba{sub 8}Al{sub x}Si{sub 46−x} prepared by HPHT. - Highlights: • HPHT is a simple and rapid synthetic approach. • We use BaSi{sub 2} as one of the starting materials replacing Ba metals. • The processing time reduces from few days to an hour. • Structure determination is refined by Rietveld analysis of XRD data. • Variable temperature electrical properties are characterized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Eu substitution on superconductivity in Ba{sub 8−x}Eu{sub x}Al{sub 6}Si{sub 40} clathrates

The silicon clathrate superconductor is uncommon as its structure is dominated by strong Si-Si covalent bonds, rather than the metallic bond, that are more typical of traditional superconductors. To understand the influence of large magnetic moment of Eu on superconductivity for type-I clathrates, a series of samples with the chemical formula Ba{sub 8−x}Eu{sub x}Al{sub 6}Si{sub 40} (x = 0, 0.5, 1, and 2) were synthesised in which Eu occupied Ba sites in cage center. With the increase of Eu content, the cubic lattice parameter decreases monotonically signifying continuous shrinkage of the constituting (Ba/Eu)@Si{sub 20} and (Ba/Eu)@Si{sub 24} cages. The temperature dependence of magnetization at low temperature revealed that Ba{sub 8}Al{sub 6}Si{sub 40} is superconductive with transition temperature at T{sub C} = 5.6 K. The substitution of Eu for Ba results in a strong superconductivity suppression; Eu-doping largely decreases the superconducting volume and transition temperature T{sub C}. Eu atoms enter the clathrate lattice and their magnetic moments break paired electrons. The Curie-Weiss temperatures were observed at 3.9, 6.6, and 10.9 K, respectively, for samples with x = 0.5, 1.0, and 2.0. Such ferromagnetic interaction of Eu can destroy superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Silicon clathrates for lithium ion batteries: A perspective

Development of novel energy storage techniques is essential for the development of sustainable energy resources. Li-ion batteries have the highest rated energy density among rechargeable batteries and have attracted a lot of attention for energy storage in the last 15–20 years. However, significant advancements are required in anode materials before Li-ion batteries become viable for a wide variety of applications, including in renewable energy storage, grid storage, and electric vehicles. While graphite is the current standard anode material in commercial Li-ion batteries, it is Si that exhibits the highest specific energy density among all materials considered for this purpose. Si, however, suffers from significant volume expansion/contraction and the formation of a thick solid-electrolyte interface layer. To resolve these issues, Si clathrates are being considered for anode materials. Clathrates are inclusion compounds and contain cages in which Li could be captured. While Si clathrates offer promising advantages due to their caged structure which enables negligible volume change upon Li insertion, there remains scientific challenges and knowledge gaps to be overcome before these materials can be utilized for Li-ion battery applications, i.e., understanding lithiation/de-lithiation mechanisms, optimizing guest concentrations, as well as safe and economic synthesis routes.

36 MATERIALS SCIENCE↗

Formation Mechanism of Argon Clathrates with Carbon Dendrites

The formation mechanism of argon clathrates with carbon dendrites obtained in the plasma of an atmospheric-pressure gas discharge has been studied. It has been shown that the formation of these clathrates is due to the difference between characteristic times: the lifetime of molecules surrounding argon atoms and the time of C–C bonding. It has been noted that argon clathrates with carbon dendrites can form only if a number of conditions are met: formation of molecular traps in the discharge, provision of a sufficiently low temperature at the center of the arc discharge, and the presence of active carbon particles arising from plasma decomposition of hydrocarbon precursors. Whether or not these conditions are met depends primarily on the composition of the initial hydrocarbon mixture and discharge current density, as follows from experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High Pressure Properties of a Ba-Cu-Zn-P Clathrate-I

Here, the high pressure properties of the novel tetrel-free clathrate, Ba 8 Cu 13.1 Zn 3.3 P 29.6 , were investigated using synchrotron powder X-ray diffraction. The pressure was applied using a diamond anvil cell. No structural transitions or decomposition were detected in the studied pressure range of 0.1–7 GPa. The calculated bulk modulus for Ba 8 Cu 13.1 Zn 3.3 P 29.6 using a third-order Birch-Murnaghan equation of state is 65(6) GPa at 300 K. This bulk modulus is comparable to the bulk moduli of Ge- and Sn-based clathrates, like A 8 Ga 16 Ge 30 (A = Sr, Ba) and Sn 19.3 Cu 4.7 P 22 I 8 , but lower than those for the transition metal-containing silicon-based clathrates, Ba 8 T x Si46–x, T = Ni, Cu; 3 ≤ x ≤ 5.

36 MATERIALS SCIENCE↗

Encapsulation kinetics and dynamics of carbon monoxide in clathrate hydrate

Carbon monoxide clathrate hydrate is a potentially important constituent in the solar system. In contrast to the well-established relation between the size of gaseous molecule and hydrate structure, previous work showed that carbon monoxide molecules preferentially form structure-I rather than structure-II gas hydrate. Resolving this discrepancy is fundamentally important to understanding clathrate formation, structure stabilization and the role the dipole moment/molecular polarizability plays in these processes. Here we report the synthesis of structure-II carbon monoxide hydrate under moderate high-pressure/low-temperature conditions. We demonstrate that the relative stability between structure-I and structure-II hydrates is primarily determined by kinetically controlled cage filling and associated binding energies. Within hexakaidecahedral cage, molecular dynamic simulations of density distributions reveal eight low-energy wells forming a cubic geometry in favour of the occupancy of carbon monoxide molecules, suggesting that the carbon monoxide–water and carbon monoxide–carbon monoxide interactions with adjacent cages provide a significant source of stability for the structure-II clathrate framework.

36 MATERIALS SCIENCE↗