Search NASA⌕ Search

SEARCH · Search NASA

Results for “COBALT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

U.S. Cobalt: A Cycle of Diverse and Important Uses

We present a material flow and stock analysis for cobalt use and waste in the United States from 1996 to 2020, including the separation of cobalt flows into six product groups and five end-use sectors. The results demonstrate the importance of U.S. manufacturing for air travel, energy storage, cemented carbides, and numerous other applications. Battery use in the United States has become the primary factor in cobalt demand, but the batteries are manufactured mainly elsewhere. The correlation of cobalt products to principal end-use sectors provides an informed view of the location of cobalt in in-use stocks. Furthermore, two approaches could primarily address these stocks: enhanced recycling of batteries in consumer/business electronics and implementing cobalt-free substitutes for chemical uses and future battery technologies. Overall, cobalt's uses are as diverse and societally crucial as any element in the periodic table but have heretofore not received the levels of attention they deserve.

36 MATERIALS SCIENCE↗
NASA NTRS1986

Thermal-fatigue and oxidation resistance of cobalt-modified Udimet 700 alloy

Comparative thermal-fatigue and oxidation resistances of cobalt-modified wrought Udimet 700 alloy (obtained by reducing the cobalt level by direct substitution of nickel) were determined from fluidized-bed tests. Bed temperatures were 1010 and 288 C (1850 and 550 C) for the first 5500 symmetrical 6-min cycles. From cycle 5501 to the 14000-cycle limit of testing, the heating bed temperature was increased to 1050 C (1922 F). Cobalt levels between 0 and 17 wt% were studied in both the bare and NiCrAlY overlay coated conditions. A cobalt level of about 8 wt% gave the best thermal-fatigue life. The conventional alloy specification is for 18.5% cobalt, and hence, a factor of 2 in savings of cobalt could be achieved by using the modified alloy. After 13500 cycles, all bare cobalt-modified alloys lost 10 to 13 percent of their initial weight. Application of the NiCrAlY overlay coating resulted in weight losses of 1/20 to 1/100 of that of the corresponding bare alloy.

Bizon, P. T.↗
DOE OSTI2026

Ultra-grain refinement creates FCC pure cobalt with high strength and high ductility

Although pure cobalt is generally known to have a hexagonal close-packed (HCP) structure at room temperature, we show that its high-temperature face-centered cubic (FCC) phase can be strongly stabilized through grain refinement, resulting in FCC pure cobalt at room temperature. Ultrafine-grained (UFG) FCC cobalt exhibits a hierarchical microstructure consisting of dense stacking fault (SF) networks in the dominant FCC grains and numerous SFs and thin FCC layers within a few HCP plates. This unique microstructure leads to a high tensile strength exceeding 1 GPa, together with a tensile elongation of over 35%, thereby surpassing the well-known strength–ductility trade-off of pure metals. In-situ synchrotron X-ray diffraction revealed that the UFG FCC cobalt exhibited a markedly enhanced deformation-induced FCC→HCP martensitic transformation, which provided sustained strain hardening through the transformation-induced plasticity (TRIP) effect. Furthermore, ultra-grain refinement dramatically suppressed premature void and crack formation, causing a transition in the fracture mode from brittle to ductile. These findings advance the fundamental understanding of the phase stability and TRIP-assisted deformation in elemental cobalt and offer new guidelines for the microstructure-driven design of high-performance cobalt-based structural alloys.

Metastability↗
DOE OSTI2020

Enhanced visible-light-assisted peroxymonosulfate activation on cobalt-doped mesoporous iron oxide for orange II degradation

Sulfate radical-based advanced oxidation processes (SR-AOP) attracted a lot of attention due to their capability and adaptability in wastewater treatment. Although heterogeneous cobalt-based catalysts have been extensively studied and have emerged superior for peroxymonosulfate (PMS) activation, leaching of cobalt is still a major concern. Herein, we report a photo-assisted PMS activation approach using cobalt doped mesoporous iron oxide with exceptional activity and stability up to 7 cycles with very low cobalt leaching (0.5 ppm). The highest activity was obtained by 1 mol % cobalt doped mesoporous iron oxide. Orange II dye was completely degraded by the reactive oxygen species (ROS) generated under visible light irradiation within 1 min. ROS were evaluated using two distinct techniques (Fluorescence probes and Electron Paramagnetic Resonance (EPR). ROS quenching experiments were also used to highlight the dominant pathway. This study correlates the structural and electronic changes induced with cobalt doping to the exceptional activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Cobalt Dissolution from Metal Oxides and Battery Cathode Materials with Acetic Acid-Based Deep Eutectic Solvents

Recovery of critical metals with alternative solvents beyond those in traditional pyrometallurgy and hydrometallurgy is needed in consideration of environmental challenges and the growing demand for metals in energy technologies. Deep eutectic solvents (DESs) have emerged as sustainable alternatives for solvometallurgy in metal separation and recovery. In this study, DESs based on hydrogen bond acceptors (HBAs) including choline chloride (ChCl), acetylcholine chloride (AChCl), and betaine (Bet) were investigated for their effectiveness when paired with acetic acid (AA) as the hydrogen bond donor (HBD) for the dissolution of cobalt from cobalt oxide (CoO), lithium cobalt oxide (LiCoO 2 ), and lithium nickel manganese cobalt oxide (LNMC). Based on the spectroscopic analysis of the metal dissolution and coordination, Bet:AA was found to provide the highest solubility for CoO (0.33 M) in the form of an octahedral complex. On the other hand, ChCl:AA solvent was more effective at dissolving LiCoO 2 with 0.04 M Co 2+ corresponding to 17% dissolution efficiency and LNMC with 0.06 M Co 2+ corresponding to 72% dissolution efficiency at 50 °C, compared to Bet:AA (9% for LiCoO 2 and 31% for LNMC). Although the solubilities of LiCoO 2 and LNMC have not significantly improved in ChCl:AA, this difference in effectiveness between the solvents clearly reveals the role of the HBA in solubilization. The coordination synergy between the chloride and the –OH moiety facilitates the breakdown of the LiCoO 2 driven by the alteration of the solvent polarity. Cobalt in these solutions was found dominantly as a tetrahedral [CoCl 4 ] 2– complex. A chemical separation of cobalt oxalate from a mixed-metal oxide system based on Co, Fe, and Ni was also demonstrated, confirming the potential of these solvents for practical metal recovery.

Cobalt separation↗
DOE OSTI2024

Effects of Calcination Conditions on the Structural and Electrochemical Behaviors of High‐Nickel, Cobalt‐Free LiNi 0.9 Mn 0.1 O 2 Cathode

Abstract Eliminating cobalt from high‐nickel layered oxide cathodes lowers the cost of lithium‐ion batteries for electric vehicles. However, cobalt‐free cathodes with high Mn 4+ and Ni 2+ contents are prone to Li/Ni mixing after synthesis, potentially compromising battery energy density, rate capability, and cycling stability. Without cobalt facilitating cation ordering in the layered structure, the degree of Li/Ni mixing in cobalt‐free cathodes depends heavily on the calcination conditions. In this study, a systematic exploration of calcination temperatures and LiOH ratio for LiNi 0.9 Mn 0.1 O 2 (NM‐90) provides detailed insights into the optimal synthesis conditions for high‐capacity cobalt‐free cathodes with extended cycle life. Surprisingly, high Li/Ni mixing does not necessarily lead to poor cycling stability whereas low Li/Ni mixing does not guarantee a long cycle life. More importantly, although excessive calcination temperature can further decrease Li/Ni mixing, it does not necessarily enhance capacity. Instead, the pernicious effects from the H2 → H3 phase transition are amplified due to a pronounced two‐phase reaction. An extensive suite of chemical and structural characterization methods uncovers a correlation between elevated calcination temperature, phase transformation, cation ordering, and capacity fading behavior: “overcooking” high‐nickel, cobalt‐free cathodes induce structural arrangement toward that of LiNiO 2 , with exacerbated lattice distortion and surface instability accelerating capacity fade.

Lee, Steven↗
DOE OSTI2021

Selective cobalt and nickel electrodeposition for lithium-ion battery recycling through integrated electrolyte and interface control

Abstract Molecularly-selective metal separations are key to sustainable recycling of Li-ion battery electrodes. However, metals with close reduction potentials present a fundamental challenge for selective electrodeposition, especially for critical elements such as cobalt and nickel. Here, we demonstrate the synergistic combination of electrolyte control and interfacial design to achieve molecular selectivity for cobalt and nickel during potential-dependent electrodeposition. Concentrated chloride allows for the speciation control via distinct formation of anionic cobalt chloride complex (CoCl 4 2- ), while maintaining nickel in the cationic form ([Ni(H 2 O) 5 Cl] + ). Furthermore, functionalizing electrodes with a positively charged polyelectrolyte (i.e., poly(diallyldimethylammonium) chloride) changes the mobility of CoCl 4 2- by electrostatic stabilization, which tunes cobalt selectivity depending on the polyelectrolyte loading. This strategy is applied for the multicomponent metal recovery from commercially-sourced lithium nickel manganese cobalt oxide electrodes. We report a final purity of 96.4 ± 3.1% and 94.1 ± 2.3% for cobalt and nickel, respectively. Based on a technoeconomic analysis, we identify the limiting costs arising from the background electrolyte, and provide a promising outlook of selective electrodeposition as an efficient separation approach for battery recycling.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tuning magnetic order in the van der Waals metal $Fe_5GeTe_2$ by cobalt substitution

Fe 5 - x GeTe 2 is a van der Waals material with one of the highest reported bulk Curie temperatures, T C ≈ 310 K . Here, theoretical calculations and experiments are utilized to demonstrate that the magnetic ground state is highly sensitive to local atomic arrangements and the interlayer stacking. Cobalt substitution is found to be an effective way to manipulate the magnetic properties while also increasing the ordering temperature. In particular, cobalt substitution up to ≈ 30 % enhances T C and changes the magnetic anisotropy, while ≈ 50 % cobalt substitution yields an antiferromagnetic state. Single crystal x-ray diffraction evidences a structural change upon increasing the cobalt concentration, with a rhombohedral cell observed in the parent material and a primitive cell observed for ≈ 46 % cobalt content relative to iron. First-principles calculations demonstrate that it is a combination of high cobalt content and the concomitant change to primitive layer stacking that produces antiferromagnetic order. These results illustrate the sensitivity of magnetism in Fe 5 - x GeTe 2 to composition and structure, and emphasize the important role of local structural order-disorder and layer stacking in cleavable magnetic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Investigating Nanoscale Electron Transfer Processes at the Cell-Mineral Interface in Cobalt-Doped Ferrihydrite Using Geobacter sulfurreducens: A Multi-Technique Approach

Cobalt is an essential element for life and plays a crucial role in supporting the drive to clean energy, due to its importance in rechargeable batteries. Co is often associated with Fe in the environment, but the fate of Co in Fe-rich biogeochemically-active environments is poorly understood. To address this, synchrotron-based scanning X-ray microscopy (SXM) was used investigate the behaviour of cobalt at the nanoscale in Co-Fe(III)-oxyhydroxides undergoing microbial reduction. SXM can assess spatial changes in metal speciation and organic compounds helping to elucidate the electron transfer processes occurring at the cell-mineral interface and inform on the fate of cobalt in redox horizons. G. sulfurreducens was used to reduce synthetic Co-ferrihydrite as an analogue of natural cobalt-iron-oxides. Magnetite [Fe(II)/Fe(III) 3 O 4 ] production was confirmed by powder X-ray diffraction (XRD), SXM and X-ray magnetic circular dichroism (XMCD) data, where best fits of the latter suggested Co-bearing magnetite. Macro-scale XAS techniques suggested Co(III) reduction occurred and complementary SXM at the nanoscale, coupled with imaging, found localised biogenic Co(III) reduction at the cell-mineral interface via direct contact with outer membrane cytochromes. No discernible localised changes in Fe speciation were detected in the reordered cobalt-iron-oxides that were formed and at the end point of the experiment only 11% Co and 1.5% Fe had been solubilised. The solid phase retention, alongside the highly localised and preferential cobalt bioreduction observed at the nanoscale is consistent with retention of Co in redox zones. This work improves our fundamental molecular-scale understanding of the fate of Co in complex environmental systems and supports the development of biogenic Co-doped magnetite for industrial applications from drug delivery systems to magnetic recording media.

58 GEOSCIENCES↗
NASA NTRS1982

Effects of cobalt on structure, microchemistry and properties of a wrought nickel-base superalloy

The effect of cobalt on the basic mechanical properties and microstructure of wrought nickel-base superalloys has been investigated experimentally by systematically replacing cobalt by nickel in Udimet 700 (17 wt% Co) commonly used in gas turbine (jet engine) applications. It is shown that the room temperature tensile yield strength and tensile strength only slightly decrease in fine-grained (disk) alloys and are basically unaffected in coarse-grained (blading) alloys as cobalt is removed. Creep and stress rupture resistances at 760 C are found to be unaffected by cobalt level in the blading alloys and decrease sharply only when the cobalt level is reduced below 8 vol% in the disk alloys. The effect of cobalt is explained in terms of gamma prime strengthening kinetics.

Jarrett, R. N.↗
NASA NTRS1983

Effects of cobalt in nickel-base superalloys

The role of cobalt in a representative wrought nickel-base superalloy was determined. The results show cobalt affecting the solubility of elements in the gamma matrix, resulting in enhanced gamma' volume fraction, in the stabilization of MC-type carbides, and in the stabilization of sigma phase. In the particular alloy studied, these microstructural and microchemistry changes are insufficient in extent to impact on tensile strength, yield strength, and in the ductilities. Depending on the heat treatment, creep and stress rupture resistance can be cobalt sensitive. In the coarse grain, fully solutioned and aged condition, all of the alloy's 17% cobalt can be replaced by nickel without deleteriously affecting this resistance. In the fine grain, partially solutioned and aged condition, this resistance is deleteriously affected only when one-half or more of the initial cobalt content is removed. The structure and property results are discussed with respect to existing theories and with respect to other recent and earlier findings on the impact of cobalt, if any, on the performance of nickel-base superalloys.

Tien, J. K.↗
NASA NTRS1984

Effects of long-time elevated temperature exposures on hot-isostatically-pressed power-metallurgy Udimet 700 alloys with reduced cobalt contents

Because almost the entire U.S. consumption of cobalt depends on imports, this metal has been designated "strategic'. The role and effectiveness of cobalt is being evaluated in commercial nickel-base superalloys. Udiment 700 type alloys in which the cobalt content was reduced from the normal 17% down to 12.7%, 8.5%, 4.3%, and 0% were prepared by standard powder metallurgy techniques and hot isostatically pressed into billets. Mechanical testing and microstructural investigations were performed. The mechanical properties of alloys with reduced cobalt contents which were heat-treated identically were equal or better than those of the standard alloy, except that creep rates tended to increase as cobalt was reduced. The effects of long time exposures at 760 C on mechanical properties and at 760 C and 845 C on microstructures were determined. Decreased tensile properties and shorter rupture lives with increased creep rates were observed in alloy modifications. The exposures caused gamma prime particle coarsening and formation of sigma phase in the alloys with higher cobalt contents. Exposure at 845 C also reduced the amount of MC carbides.

Hart, F. H.↗
NASA NTRS2008

Cobalt ferrite based magnetostrictive materials for magnetic stress sensor and actuator applications

Magnetostrictive material based on cobalt ferrite is described. The cobalt ferrite is substituted with transition metals (such manganese (Mn), chromium (Cr), zinc (Zn) and copper (Cu) or mixtures thereof) by substituting the transition metals for iron or cobalt to form substituted cobalt ferrite that provides mechanical properties that make the substituted cobalt ferrite material effective for use as sensors and actuators. The substitution of transition metals lowers the Curie temperature of the material (as compared to cobalt ferrite) while maintaining a suitable magnetostriction for stress sensing applications.

Jiles, David C.↗
NASA NTRS2017

Open-Loop Flight Testing of COBALT GN&C Technologies for Precise Soft Landing

A terrestrial, open-loop (OL) flight test campaign of the NASA COBALT (CoOperative Blending of Autonomous Landing Technologies) platform was conducted onboard the Masten Xodiac suborbital rocket testbed, with support through the NASA Advanced Exploration Systems (AES), Game Changing Development (GCD), and Flight Opportunities (FO) Programs. The COBALT platform integrates NASA Guidance, Navigation and Control (GN&C) sensing technologies for autonomous, precise soft landing, including the Navigation Doppler Lidar (NDL) velocity and range sensor and the Lander Vision System (LVS) Terrain Relative Navigation (TRN) system. A specialized navigation filter running onboard COBALT fuzes the NDL and LVS data in real time to produce a precise navigation solution that is independent of the Global Positioning System (GPS) and suitable for future, autonomous planetary landing systems. The OL campaign tested COBALT as a passive payload, with COBALT data collection and filter execution, but with the Xodiac vehicle Guidance and Control (G&C) loops closed on a Masten GPS-based navigation solution. The OL test was performed as a risk reduction activity in preparation for an upcoming 2017 closed-loop (CL) flight campaign in which Xodiac G&C will act on the COBALT navigation solution and the GPS-based navigation will serve only as a backup monitor.

Carson, John M., III↗
DOE OSTI2021

Fischer-Tropsch synthesis: Direct cobalt nitrate reduction of promoted Co/Al 2 O 3 catalysts

Direct reduction of cobalt nitrate versus conventional calcination/reduction treatment was conducted using alumina with identical methodology as previously applied to SiO 2 and TiO 2 . Similar BET surface areas, pore volumes and pore size distributions were obtained for the activated calcined and uncalcined catalysts indicating no significant difference on morphological properties. However, the reducibility slightly increases and Co crystallite size is smaller for activated uncalcined samples. Reduction phenomena were analyzed by TPR-MS and TPR-EXAFS/XANES. Combining these techniques allows an explanation of the complex phenomena occurring during the direct reduction of cobalt nitrate, as both nitrate decomposition and cobalt oxide reduction are involved. Cobalt nitrate species are converted to CoO x intermediates. These species are oxidized by NO X (from nitrate decomposition) to Co 3 O 4 spinel, which is converted to CoO prior to Co 0 formation. Noble metals (Pt, Re, Ru and Ag) improve cobalt oxide reducibility, especially for the final reduction step (i.e., CoO to Co 0 ). The effect of direct nitrate reduction on FT activity was investigated using a 1 L CSTR. Activated unpromoted and Pt-promoted uncalcined catalysts achieved higher initial and steady-state CO conversions in comparison to the corresponding calcined catalysts. The best performance was achieved with direct reduction of uncalcined 0.5%Pt-25%Co/Al 2 O 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Lithium Iron Aluminum Nickelate, LiNi x Fe y Al z O 2 —New Sustainable Cathodes for Next–Generation Cobalt–Free Li–Ion Batteries

In recent years, cobalt has become a critical constraint on the supply chain of the Li-ion battery industry. Here, with the ever-increasing projections for electric vehicles, the dependency of current Li-ion batteries on the ever-fluctuating cobalt prices poses serious environmental and sustainability issues. To address these challenges, a new class of cobalt-free materials with general formula of LiNi x Fe y Al z O 2 ( x + y + z = 1), termed as the lithium iron aluminum nickelate (NFA) class of cathodes, is introduced. These cobalt-free materials are synthesized using the sol–gel process to explore their compositional landscape by varying aluminum and iron. These NFA variants are characterized using electron microscopy, neutron and X-ray diffraction, and Mössbauer and X-ray photoelectron spectroscopy to investigate their morphological, physical, and crystal-structure properties. Operando experiments by X-ray diffraction, Mössbauer spectroscopy, and galvanostatic intermittent titration have been also used to study the crystallographic transitions, electrochemical activity, and Li-ion diffusivity upon lithium removal and uptake in the NFA cathodes. NFA compositions yield specific capacities of ≈200 mAh g -1 , demonstrating reasonable rate capability and cycling stability with ≈80% capacity retention after 100 charge/discharge cycles. While this is an early stage of research, the potential that these cathodes could have as viable candidates in next-generation cobalt-free lithium-ion batteries is highlighted here.

25 ENERGY STORAGE↗
DOE OSTI2020

LiNi x Fe y Al z O 2 , a new cobalt-free layered cathode material for advanced Li-ion batteries

Recently, rapid fluctuations in cobalt prices have created a worsening supply chain constraint that has become a serious cause of concern amidst global battery manufacturers. To address this challenge, we report herein a new class of cobalt-free, nickel-rich layered cathode material termed the NFA class with general formula LiNi x Fe y Al z O 2 (x + y + z = 1). Using co-precipitation reaction in a continuous stirred tank reactor, we synthesized NFA(OH) 2 precursors with the constituent Ni, Fe and Al elements successfully incorporated. The obtained LiNFAO 2 cathode was characterized using X-Ray diffraction, Mössbauer spectroscopy and scanning electron microscopy. Electrochemical behavior was assessed using cyclic voltammetry, galvanostatic charge/discharge, electrochemical impedance spectroscopy and galvanostatic intermittent titration technique at various states of lithiation/delithiation. Electrochemical performance evaluations revealed that our cobalt-free material delivers high capacity of 190 mAh/g at 0.1C. Rate and cycling performance evaluations also indicated good rate capability and cycling stability with 88% capacity retention after 100 cycles at C/3. Using NFA cathodes, we also fabricated a 0.5Ah (C/3) cobalt-free Li-ion battery which demonstrated reasonable cycling stability with ~72% capacity retained after 200 cycles. Overall, our work demonstrates the immense potential of the cobalt-free NFA class cathodes as viable candidates towards development of next generation cost effective lithium ion batteries.

25 ENERGY STORAGE↗
NASA NTRS2016

Fischer-Tropsch Cobalt Catalyst Activation and Handling Through Wax Enclosure Methods

Fischer-Tropsch (F-T) synthesis is considered a gas to liquid process which converts syn-gas, a gaseous mixture of hydrogen and carbon monoxide, into liquids of various hydrocarbon chain length and product distributions. Cobalt based catalysts are used in F-T synthesis and are the focus of this paper. One key concern with handling cobalt based catalysts is that the active form of catalyst is in a reduced state, metallic cobalt, which oxidizes readily in air. In laboratory experiments, the precursor cobalt oxide catalyst is activated in a fixed bed at 350 C then transferred into a continuous stirred tank reactor (CSTR) with inert gas. NASA has developed a process which involves the enclosure of active cobalt catalyst in a wax mold to prevent oxidation during storage and handling. This improved method allows for precise catalyst loading and delivery into a CSTR. Preliminary results indicate similar activity levels in the F-T reaction in comparison to the direct injection method. The work in this paper was supported by the NASA Fundamental Aeronautics Subsonics Fixed Wing Project.

Fischer-Tropsch↗