Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONTACT POTENTIAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Low-Temperature Gold Deposition Improves CdTe Back Contacts

Improved back contacts can benefit CdTe photovoltaics (PV). In this work, Cd(Se,Te) PV absorbers are cooled during Au evaporation to thermally quench a chemical reaction occurring between gold and CdTe and the generation of a reaction product that lowers device efficiency. Reducing substrate temperature enhances PV power conversion efficiency via open-circuit voltage and fill factor increases. X-ray photoelectron spectroscopy (XPS) reveals that lower temperature also reduces chemical perturbations of the CdTe, potentially linking back contact formation to a CdTe degradation product that hinders PV performance. Comparing reaction enthalpy and substrate heating energy shows that back contact formation by sputtering elemental metals onto ZnTe may exhibit a degradation pathway analogous to that of CdTe/Au reported here. Degradation-diminishing contact formation processes are therefore of general interest for optoelectronic devices, and the reduced substrate temperature in this study is one example.

14 SOLAR ENERGY↗
NASA NTRS2019

Improved Processing Techniques for Inclusion-Free Steel for Bearing and Mechanical Component Applications

High hardness, high carbide powder metallurgy tools steels such as M62 enable the operation of ball bearings at extremely high load and stress levels. Operation under such conditions increases the potential for rolling contact fatigue failure attributed to ceramic particle inclusions. To address this challenge, industry has sought steel made from ever increasing levels of cleanliness but the results have been uneven owing to the random nature of the occurrence of material flaws. One common approach is to rely upon careful ingot inspections prior to bearing manufacture. By selecting the cleanest portion of an ingot, it is expected that bearings relatively free from material flaws will result. This approach is not always successful because detrimental flaws that exist deep within an ingot can pass inspection undetected potentially causing subsequent failure. Recent efforts to commercialize an intermetallic material, 60NiTi, for rolling element bearings demonstrates a pathway to produce bearing steel that is free from unwanted ceramic particle inclusions. In this paper, the process used to make bearing grade ceramic-free NiTi alloys is described and applied to steelmaking. At its core, the NiTi process differs from steel making in one key aspect. NiTi alloys are made from elementally pure starting materials that are melted, blended and processed in equipment absolutely free from exposure to oxygen and ceramics ensuring a ceramic particle-free product. In contrast, the predominant method to make bearing steel is to employ a successive series of purification steps to reduce contamination levels below required thresholds. This paper describes the processes developed and applied to high carbide tool steel, M62. The resulting material and microstructures are evaluated and compared to M62 prepared by conventional powder metallurgy techniques. It is hoped that the application of materials manufacturing techniques used for fracture sensitive ceramics and intermetallic materials like NiTi can provide a pathway to Ultra-Clean, Ceramic-Inclusion free steels for rolling element bearings and other failure critical applications.

Steel↗
NASA NTRS1979

Solving A Corrosion Problem

The corrosion problem, it turned out, stemmed from the process called electrolysis. When two different metals are in contact, an electrical potential is set up between them; when the metals are surrounded by an electrolyte, or a conducting medium, the resulting reaction causes corrosion, often very rapid corrosion. In this case the different metals were the copper grounding system and the ferry's aluminum hull; the dockside salt water in which the hull was resting served as the electrolyte. After identifying the source of the trouble, the Ames engineer provided a solution: a new wire-and-rod grounding system made of aluminum like the ferry's hull so there would no longer be dissimilar metals in contact. Ames research on the matter disclosed that the problem was not unique to the Golden Gate ferries. It is being experienced by many pleasure boat operators who are probably as puzzled about it as was the Golden Gate Transit Authority.

Source record↗
DOE OSTI2024

Triboplasma assisted chemical conversion in granular systems: a semi-analytic model

We present a semi-analytic model for a novel plasma-assisted chemical conversion pathway using triboplasmas generated in granular flows. Triboelectric charge relaxation is a well known phenomena where the potential generated from contact charging of particles exceeds the breakdown voltage of the background gas. In this work, we extend the triboelectric charge relaxation theory to include non equilibrium plasma energy and particle balance equations to predict the formation of dissociated and excited species that act as precursors to chemical conversion, for example in plasma-assisted ammonia synthesis. Our example case study with nitrogen background gas and teflon/aluminum tribomaterial system yielded high excited nitrogen species densities per collision that are comparable to current plasma-assisted conversion pathways. We also present a regime diagram for various gases where Paschen breakdown parameters are used to determine whether triboplasmas can be formed for a given effective work-function difference between two materials. Our sensitivity studies indicate particle velocity, particle radius, solids fraction and space charge effects play a critical role in overall plasma densities and excited species production.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRSDate not supplied

Modeling Spacesuit-Human Interaction for Injury Risk Identification

Performing functional tasks while inside of the space suit introduces additional ergonomic challenges which can lead to musculoskeletal stresses and injuries in astronauts. Computational modeling of the suit-body interaction can be used alongside human-in-the-loop testing to understand and mitigate these risks and potentially improve the work performance. In this work, a static rigid-body model of the human body was integrated with the space suit and the process is described. This model enables prediction of the resulting joint torques and musculoskeletal loading from a simulated extravehicular activity (EVA) task. For representative EVA tasks, joint torque and body angles were used as parameters to predict the muscle strength required to achieve the task, as well as the percentage of the general and astronaut-like population that could achieve that strength demand. Population strength capability can be used as an indicator of the difficulty of a task and the level of injury risk for the given task types and crew anthropometry. The sensitivity of the model to inputs such as body joint location within the space suit and individual anthropometry will also be evaluated. Future work will use a database of3D human body scans and the movements of the body inside the suit during different EVA tasks to identify potential soft tissue contact points. The specific locations and magnitudes of contacts between the body and suit are expected to identify risk of repetitive tissue contact stresses. Overall, this model will provide a new tool to structurally identify the injury risks of EVA tasks and evaluate alternate strategies to reduce injury risk.

Garima Gupta↗
NASA NTRS1978

An exact derivation of contact resistance to planar devices

A mixed boundary-value problem is formulated for an imperfect rectangular contact to a semiconducting sheet (layer). An exact model for derivation of contact resistance is developed and its solution by conformal mapping and eigenfunction expansion is presented. The expression for contact resistance is similar to that for a perfect (lossless) contact but includes an additional term containing the lowest-order coefficient in the infinite series expansion of the complex potential function. The calculated contact resistances are compared with those obtained from three approximate models: lossless contact, transmission line, and extended transmission line models. The extended transmission line model appears to be a very satisfactory approximation provided the ratio of contact length to sheet thickness is no less than 0.5.

Schuldt, S. B.↗
NASA NTRS1986

Electrochemical behavior of a titanium electrode in hydrazine solutions

The kinetics of the establishment of the oxidation-reduction potential of a titanium electrode upon contact with hydrazine was studied in different media: H2SO4, NaOH, and Na2SO4. It was found that the nature of the potential shift depends little on the medium. The initial potential determines the rate of potential displacement upon contact with hydrazine, which is explained by the different condition of the electrode's surface.

Levchenko, A. K.↗
NASA NTRS2024

Effect of Varying HUT Sizing on Human-Spacesuit Contact Patterns

Fit, comfort, and mobility of the spacesuit rely on the location, magnitude, and type of contact between the suit and wearer. Typically, spacesuits include the Hard Upper Torso (HUT) comprising the upper torso of the spacesuit. Potential injuries from hard contact between the wearer’s shoulders and the HUT are a concern; therefore, to investigate spacesuit-wearer contact patterns, data from a retrospective study was analyzed. This study had eight subjects wearing the Shuttle Extravehicular Mobility Unit (EMU) spacesuit in two configurations, one with a nominally sized HUT and another with an oversized HUT. The subjects were sized per the NASA standard suit fit procedure. The suit’s arms and lower body were also resized to provide nominal arm and lower body fit, accounting for the larger HUT. Subjects held various shoulder postures (neutral posture, and various maximum shoulder rotations) with the suit pressurized to 4.3 PSI. For each posture, subjects reported the intensity of their perceived contact with the suit on a Borg CR10 scale, 0 indicating a non-existent contact intensity, and 10 representing a maximal contact intensity. Ratings were recorded for 11 regions covering the upper body and these ratings were used to determine the impact of body shape and size on suit contact. Our preliminary findings suggest that oversized HUTs had less contact regions than compared to the nominal HUT; and the region of contact, contact patterns, and contact intensities varied from person to person with the oversized HUT. This variance could be linked to subjects’ body shape and size. The next goal is to establish a causal factor between body shape and size, pose, contact region, and the HUT size. The outcome is expected to help understand the overall contact trends and insights into the influence of HUT sizing on suit fit.

Will Green↗
NASA NTRS1987

An experimental investigation of the plasma contacting process

Measurements including plasma potential profile measurements made on a simple hollow cathode plasma contactor operating in the electron collection and emission modes are described. The ignited electron collection mode of contactor operation is identified, shown to improve contactor performance and found to be facilitated by increasing the size of the contactor anode. Potential profile data are compared to the predictions of a simple theoretical model that describes space-charge-current limitations imposed by the formation of a double sheath and found to agree with each other to within about + or - 25 percent. Because electrons, which are the dominant charge carriers, tend to be emitted from the hollow cathode in the emission mode and collected by the anode in the collection mode it is suggested that operation at high electrodynamic tether currents will probably require switching the point of tether connection to the contactor between its cathode and anode when the direction of tether current is reversed.

Wilbur, Paul J.↗
NASA NTRS2008

Preliminary Test Results of a Non-Contacting Finger Seal on a Herringbone-Grooved Rotor

Low leakage, non-contacting finger seals have potential to reduce gas turbine engine specific fuel consumption by 2 to 3 percent and to reduce direct operating costs by increasing the time between engine overhauls. A non-contacting finger seal with concentric lift-pads operating adjacent to a test rotor with herringbone grooves was statically tested at 300, 533, and 700 K inlet air temperatures at pressure differentials up to 576 kPa. Leakage flow factors were approximately 70 percent less than state-of-the-art labyrinth seals. Leakage rates are compared to first order predictions. Initial spin tests at 5000 rpm, 300 K inlet air temperature and pressure differentials to 241 kPa produced no measurable wear.

Proctor, Margaret P.↗
NASA NTRS2008

Preliminary Test Results of a Non-Contacting Finger Seal on a Herringbone-Grooved Rotor

Low leakage, non-contacting finger seals have potential to reduce gas turbine engine specific fuel consumption by 2 to 3 percent and to reduce direct operating costs by increasing the time between engine overhauls. A non-contacting finger seal with concentric lift-pads operating adjacent to a test rotor with herringbone grooves was statically tested at 300, 533, and 700 K inlet air temperatures at pressure differentials up to 576 kPa. Leakage flow factors were approximately 70 percent less than state-of-the-art labyrinth seals. Leakage rates are compared to first order predictions. Initial spin tests at 5000 rpm, 300 K inlet air temperature and pressure differentials to 241 kPa produced no measurable wear.

Proctor, Margaret P.↗
NASA NTRS1991

The Nickel(111)/Alkaline Electrolyte Interface

The electrochemical properties of Ni (111) prepared and characterized in ultra high vacuum, UHV, by surface analytical techniques have been examined in alkaline media by cyclic voltammetry using an UHV-electrochemical cell transfer system designed and built in this laboratory. Prior to the transfer, the Ni(111) surfaces were exposed to saturation coverages of CO in UHV in an attempt to protect the surface from possible contamination with other gases during the transfer. Temperature Programmed Desorption, TPD, of CO-dosed Ni (111) surfaces displaying sharp c(4x2), LEED patterns, subsequently exposed to water-saturated Ar at atmospheric pressure in an auxiliary UHV compatible chamber and finally transferred back to the main UHV chamber, yielded CO2 and water as the only detectable products. This indicates that the CO-dosed surfaces react with water and/or bicarbonate and hydroxide as the most likely products. Based on the integration of the TPD peaks, the combined amounts of H2O and CO2 were found to be on the order of a single monolayer. The reacted c(4x2)CO/Ni(111) layer seems to protect the surface from undergoing spontaneous oxidation in strongly alkaline solutions. This was evidenced by the fact that the open circuit potential observed immediately after contact with deaerated 0.1 M KOH was about 0.38 V vs. DHE, drifting slightly towards more negative values prior to initiating the voltametric scans. The average ratio of the integrated charge obtained in the first positive linear scan in the range of 0.35 to 1.5 V vs. DHE (initiated at the open circuit potential) and the first (and subsequent) linear negative scans in the same solution yielded for various independent runs a value of 3.5 +/- 0.3. Coulometric analysis of the cyclic voltammetry curves indicate that the electrochemically formed oxyhydroxide layer involves a charge equivalent to 3.2 +/- 0.4 layers of Ni metal.

Wang, Kuilong↗
DOE OSTI2025

Bio‐Inspired In Situ Tuning of the Hydrophobic Environment Around Catalytically Active Organic Ligand‐Stabilized Ruthenium Nanoparticles

Abstract The organic ligand environment surrounding enzymatic and homogeneous catalytic active sites often determines catalytic activity. Ruthenium nanoparticles, ≤1 nm in diameter, are synthesized using monodentate thiol, monodentate phosphine, and bidentate bisphosphine ligands. Even though some of the ruthenium surface is blocked by the ligands, catalytic activity is still observed for CO oxidation and H 2 O 2 decomposition. All three ligand‐stabilized ruthenium nanoparticles have similar CO oxidation rates; however, the bisphosphine‐stabilized Ru nanoparticles are approximately 2.5 times less active than the monothiol‐stabilized and monophosphine‐stabilized ruthenium nanoparticles for H 2 O 2 decomposition. It is observed that the organic ligand environment is modulated in situ during nanoparticle synthesis via partial oxidation of the bisphosphine as confirmed by 31 P NMR measurements. We hypothesize that bisphosphine‐bound Ru nanoparticles consist of a Ru core with some of the ligands bound in a monodentate manner where the other P atom is oxidized and not bound to the Ru surface leading to a thicker hydrophobic layer around the Ru nanoparticles. The increase in hydrophobicity is confirmed via contact angle and zeta potential measurements. H 2 O 2 decomposition rates are known to decrease with increasing hydrophobicity, and this work illustrates a pathway for increasing hydrophobicity in situ using ligand‐bound metallic nanoparticles.

Sufyan, Sayed Abu [Department of Chemical Engineer↗
DOE OSTI2024

Structure Development in Cross-Linked, Soybean Oil-based Waterborne Polyurethanes

Development of waterborne polyurethanes (WPU) using bio-based sources represents a step towards sustainable materials science and industry. We synthesized bio-based cationic water-dispersed crosslinked polyurethanes from high oleic soybean oil (HOSO) polyol, isophorone diisocyanate, and methyldiethanol amine, with varying ionic group contents after neutralization with acetic acid. Our primary objective was to analyze how crosslinking affects the dispersion process and film properties in multifunctional systems. The synthesis-structure-property relationship is elucidated through comprehensive analyses of the products at different stages of the synthesis. The dispersion of the WPU particles in water must occur prior to gelation during the final preparation, leading to incomplete conversion and the formation of imperfect networks. Insight into the synthesis process and polymer structure was gained by simulating polymer network parameters. Morphological analyses using synchrotron-based X-ray scattering and atomic force microscopy revealed a hierarchical structure within the WPU films. Importantly, all the films prepared in this study, without using coalescence agents, have low water absorption and high water contact angles, demonstrating their potential for textile and leather coatings and other applications.

bio-based polymers↗
NASA NTRS1979

A note on photocurrents in extrinsic semiconductors

The advent of the concept of holes and careful determination of mobilities have made it possible to realize that the potential difference between the contacts of an irradiated semiconductor in the absence of current flow is due to the difference in mobility of electrons and holes. In this paper, a preliminary analysis shows that charge neutrality and zero-current condition are compatible. This situation is clarified and it is found that the equation for the electric field E in the absence of current is not absolutely correct even under low-level injection conditions. In particular, it is shown that fairly large currents can be generated by suitable light sources, currents which are entirely due to the disparity between electron and hole mobilities.

Von Roos, O.↗
NASA NTRS1980

Fresnel lenses for ultrasonic inspection

Ultrasonic Fresnel lenses are effective focusing elements with potential applications in ultrasonic "contact" testing for defects in materials. Ultrasonic beams focused on concave lenses are used successfully with immersion transducers, for which test object is immersed in water bath. However, for large objects, objects that are already installed, objects on production lines, and objects that can be damaged by water, contact testing is more practical than immersion.

Kammerer, C. C.↗
NASA NTRS2003

Bond Sensitivity to Silicone Contamination

Currently during fabrication of the Space Shuttle booster rocket motors, the use of silicone and silicone-containing products is prohibited in most applications. Many shop aids and other materials containing silicone have the potential, if they make contact with a bond surface, to transfer some of the silicone to the substrates being bonded. Such transfer could result in a reduction of the bond strength or even failure of the subsequent bonds. This concern is driving the need to understand the effect of silicones and the concentration needed to affect a given bond-line strength. Additionally, as silicone detection methods used for materials acceptance improve what may have gone unnoticed earlier is now being detected. Thus, realistic silicone limits for process materials (below which bond performance is satisfactory) are needed rather than having an absolute no silicone permitted policy.

Caldwell, G. A.↗
NASA NTRS1998

The structure of somatosensory information for human postural control

The goal of the present study was to determine the properties of the somatosensory stimulus that alter its temporal coupling to body sway. Six standing subjects were tested while touching a metal plate positioned either directly in front of or lateral to the subject. In each condition, the plate moved 4 mm at 0.2 Hz in either the medial-lateral (ML) or anterior-posterior direction (AP). The results showed that coupling between body sway and touch plate movement was strongest when the touch plate moved in a direction along the longitudinal axis of the arm. Coupling strength was weaker when the touch plate moved perpendicular to the longitudinal axis of the arm. The results consistently show that a radial expansion stimulus was more effective than a lamellar-type stimulus at the fingertip. Moreover, somatosensory information from a surface is interpreted in terms of the orientation of the contact limb and the potential degrees of freedom available through its movement.

NASA Discipline Neuroscience↗