Search NASA⌕ Search

SEARCH · Search NASA

Results for “CPI”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Analysis of plasma measurements for the Geotail mission

The first phase of the Geotail mission, an exploration of the distant magnetotail, was successfully concluded in October 1994. Geotail is currently engaged in a survey of plasmas at distances from Earth approximately 10 to 30 R(sub E). Throughout the mission the Comprehensive Plasma Instrumentation has functioned well with successful return of data. The analysis of the CPI measurements has resulted in a series of publications, and research efforts are ongoing. Research topics include interaction of the magnetotail with the fields and plasmas of the solar wind, steady-state magnetic reconnection in the distant magnetotail at a neutral line bounded by a pair of slow-mode magnetohydrodynamic shocks, development and evolution of plasmoids in magnetotail and magnetospheric substorms, and cold ion beams coexisting as distinct components in the presence of hot plasma-sheet plasmas.

Frank, Louis A.↗
NASA NTRS1998

Modeling Magnetotail Ion Distributions with Global Magnetohydrodynamic and Ion Trajectory Calculations

On February 9, 1995, the Comprehensive Plasma Instrumentation (CPI) on the Geotail spacecraft observed a complex, structured ion distribution function near the magnetotail midplane at x approximately -30 R(sub E). On this same day the Wind spacecraft observed a quiet solar wind and an interplanetary magnetic field (IMF) that was northward for more than five hours, and an IMF B(sub y) component with a magnitude comparable to that of the RAF B(sub z) component. In this study, we determined the sources of the ions in this distribution function by following approximately 90,000 ion trajectories backward in time, using the time-dependent electric and magnetic fields obtained from a global MHD simulation. The Wind observations were used as input for the MHD model. The ion distribution function observed by Geotail at 1347 UT was found to consist primarily of particles from the dawn side low latitude boundary layer (LLBL) and from the dusk side LLBL; fewer than 2% of the particles originated in the ionosphere.

El-Alaoui, M.↗
NASA NTRS1998

Determination of Particle Sources for a Geotail Distribution Function Observed on May 23, 1995

On May 23, 1995, the Comprehensive Plasma Instrumentation (CPI) onboard the Geotail spacecraft observed a complex and structured ion distribution function near the magnetotail midplane at x approximately -10 R(sub E). On the same day, the Wind spacecraft observed a very high density (approximately 40/cubic cm) solar wind and an interplanetary magnetic field (IMF) that was predominantly northward but had several southward turnings. We have inferred the sources of the ions in this distribution function by following approximately 90,000 ion trajectories backward in time using time-dependent electric and magnetic fields obtained from a global MHD (magnetohydrodynamic) simulation. Wind data were used as input for the MHD model. We found that three sources contributed to this distribution: the ionosphere, the plasma mantle which had near-Earth and distant tail components, and the low latitude boundary layer (LLBL). Moreover, distinct structures in the low energy part of the distribution function were found to be associated with individual sources. Structures near 0 deg pitch angle were made up of either ionospheric or plasma mantle ions, while structures near 90 deg pitch angle were dominated by ions from the LLBL source. Particles that underwent nonadiabatic acceleration were numerous in the higher energy part of the ion distribution function, whereas ionospheric and LLBL ions were mostly adiabatic. A large proportion of the near-Earth mantle ions underwent adiabatic acceleration, while most of the distant mantle ions experienced nonadiabatic acceleration.

Ashour-Abdalla, M.↗
NASA NTRS2000

Optical Analysis of Transparent Polymeric Material Exposed to Simulated Space Environment

Many innovations in spacecraft power and propulsion have been recently tested at NASA, particularly in non-chemical propulsion. One improvement in solar array technology is solar concentration using thin polymer film Fresnel lenses. Weight and cost savings were proven with the Solar Concentrator Arrays with Refractive Linear Element Technology (SCARLET)-II array on NASA's Deep Space I spacecraft. The Fresnel lens concentrates solar energy onto high-efficiency solar cells, decreasing the area of solar cells needed for power. Continued efficiency of this power system relies on the thin film's durability in the space environment and maintaining transmission in the 300 - 1000 nm bandwidth. Various polymeric materials have been tested for use in solar concentrators, including Lexan(TM), polyethylene terephthalate (PET), several formulations of Tefzel(Tm) and Teflon(TM), and DC 93-500, the material selected for SCARLET-II. Also tested were several innovative materials including Langley Research Center's CPI and CP2 polymers and atomic oxygen- resistant polymers developed by Triton Systems, Inc. The Environmental Effects Group of the Marshall Space Flight Center's Materials, Processes, and Manufacturing Department exposed these materials to simulated space environment and evaluated them for any change in optical transmission. Samples were exposed to a minimum of 1000 equivalent Sun hours of near-UV radiation (250 - 400 nm wavelength). Materials that appeared robust after near-UV exposure were then exposed to charged particle radiation equivalent to a five-year dose in geosynchronous orbit. These exposures were performed in MSFC's Combined Environmental Effects Test Chamber, a unique facility with the capability to expose materials simultaneously or sequentially to protons, low-energy electrons, high-energy electrons, near UV radiation and vacuum UV radiation. Reflectance measurements can be made on the samples in vacuum. Prolonged exposure to the space environment will decrease the polymer film's transmission and thus reduce the conversion efficiency. A method was developed to normalize the transmission loss and thus rank the materials according to their tolerance to space environmental exposure. Spectral results and the material ranking according to transmission loss are presented.

Edwards, David L.↗
NASA NTRS2000

A New Digital Holographic Instrument for Measuring Microphysical Properties of Contrails in the SASS (Subsonic Assessment) Program

SPEC incorporated designed, built and operated a new instrument, called a pi-Nephelometer, on the NASA DC-8 for the SUCCESS field project. The pi-Nephelometer casts an image of a particle on a 400,000 pixel solid-state camera by freezing the motion of the particle using a 25 ns pulsed, high-power (60 W) laser diode. Unique optical imaging and particle detection systems precisely detect particles and define the depth-of-field so that at least one particle in the image is almost always in focus. A powerful image processing engine processes frames from the solid-state camera, identifies and records regions of interest (i.e. particle images) in real time. Images of ice crystals are displayed and recorded with 5 micron pixel resolution. In addition, a scattered light system simultaneously measures the scattering phase function of the imaged particle. The system consists of twenty-eight 1-mm optical fibers connected to microlenses bonded on the surface of avalanche photo diodes (APDs). Data collected with the pi-Nephelometer during the SUCCESS field project was reported in a special issue of Geophysical Research Letters. The pi-Nephelometer provided the basis for development of a commercial imaging probe, called the cloud particle imager (CPI), which has been installed on several research aircraft and used in More than a dozen field programs.

Lawson, R. Paul↗
NASA NTRS2001

Ultra-Light Precision Membrane Optics

SRS Technologies and NASA Marshall Space Flight Center have conducted a research effort to explore the possibility of developing ultra-lightweight membrane optics for future imaging applications. High precision optical flats and spherical mirrors were produced under this research effort. The thin film mirrors were manufactured using surface replication casting of CPI(Trademark), a polyimide material developed specifically for UV hardness and thermal stability. In the course of this program, numerous polyimide films were cast with surface finishes better than 1.5 nanometers rms and thickness variation of less than 63 nanometers. Precision membrane optical flats were manufactured demonstrating better than 1/13 wave figure error when measured at 633 nanometers. The aerial density of these films is 0.037 kilograms per square meter. Several 0.5-meter spherical mirrors were also manufactured. These mirrors had excellent surface finish (1.5 nanometers rms) and figure error on the order of tens of microns. This places their figure error within the demonstrated correctability of advanced wavefront correction technologies such as real time holography.

Moore, Jim↗
NASA NTRS2001

Effects of Manufacturing and Deployment on Thin Films for the NGTS Sunshade

The Next Generation Space Telescope (NGST) is being developed as an advanced astronomical observatory. The NGST proposes to utilize several thin film membrane layers to create a shield for protection of the telescope from solar thermal energy and stray light, The shield will take the form of a polygon, approximately 15 x 30 m, with individual membrane layers positioned so that they do not come in contact with one another. The membrane shield will be deployed and supported by a series of booms, which will be packed into a small volume for launch. Finally, the shield will be deployed on orbit. Several film materials are being considered for the membrane shield, including CPI, Kapton E, Kapton RN, and Upilex. Each of these polyimide materials was tested to determine their durability over the 10-year mission. New facets of materials testing have been introduced in this study to develop performance data with greater realism to actual use, particularly that of degradation from packing, launch and deployment processing. Materials were exposed to handling that simulated the life of the materials from manufacture through deployment with standardized fixtures and then exposed to a simulated, L2, 10-year radiation environment. Mechanical and thermal radiative properties were measured before and after each phase of testing. This paper summarizes the program and test results.

Wooldridge, Eve M.↗
NASA NTRS2002

Observations and Parameterizations of Particle Size Distributions in Deep Tropical Cirrus and Stratiform Precipitation Clouds: Results from In-Situ Observations in TRMM Field Campaigns

In this study, we report on the evolution of particle size distributions (PSDs) and habits as measured during slow, Lagrangian-type spiral descents through deep subtropical and tropical cloud layers in Florida, Brazil, and Kwajalein, Marshall Islands, most of which were precipitating. The objective of the flight patterns was to learn more about how the PSDs evolved in the vertical and to obtain information of the vertical structure of microphysical properties. New instrumentation yielding better information on the concentrations of particles in the size (D) range between 0.2 and 2 cm, as well as improved particle imagery, produced more comprehensive observations for tropical stratiform precipitation regions and anvils than have been available previously. Collocated radar observations provided additional information on the vertical structure of the cloud layers sampled. Most of the spirals began at cloud top, with temperatures (T) as low as -50 C, and ended at cloud base or below the melting layer (ML). The PSDs broadened from cloud top towards cloud base, with the largest particles increasing in size from several millimeters at cloud top to one centimeter or larger towards cloud base. Some continued growth was noted in the upper part of the ML. Concentrations of particles less than 1 mm in size decreased with decreasing height. The result was a consistent change in the PSDs in the vertical. Similarly, systematic changes in the size dependence of the particle cross-sectional area was noted with decreasing height. Aggregation-as ascertained from both the changes in the PSDs and evolution of particle habits as observed in high detail with the cloud particle imager (CPI) probe-was responsible for these trends. The PSDs were generally well-represented by gamma distributions of the form N = N0 gamma D microns e- lambda gamma D that were fitted to the PSDs over 1-km horizontal intervals throughout the spirals. The intercept (N0 gamma), slope (lambda gamma), and dispersion (microns) values were derived for each PSD. Exponential curves (N = N0e- lambdaD; micron = 0) were also fitted to the distributions. The lambda gamma values for given spirals varied systematically with temperature as did the values of lambda (exponential), and the data generally conformed to values found in previous studies involving exponential fits to size distributions in mid-latitude frontal and cirrus layers. Considerable variability often noted in the PSD properties during the loops of individual spirals was manifested primarily in large changes in N0 gamma and N0, but micron, lambda gamma and lambda remained fairly stable. Temperature is not found to be the sole factor controlling lambda gamma or lambda but is a primary one. Direct relationships were found between lambda gamma and N0 gamma or lambda gamma and micron for the gamma distributions and lambda and N0 for the exponential. The latter relationship was not found as distinctly in earlier studies; observed PSDs in this study had better fidelity with less scatter. The micron values changed monotonically with T over the range of temperatures and were directly related to N0 gamma or lambda gamma, thereby reducing the number of variables in the PSD functional equation to two. In the upper part of the ML, N0 and lambda continued to decrease, and in the lower part these values began to increase as the largest particles melted. We developed general expressions relating various bulk microphysical, radar, and radiative transfer-related variables to N0 gamma and lambda gamma, useful for both tropical and mid-latitude clouds. These relationships facilitate the specification of a number of bulk properties in cloud and climate models. The results presented in this paper apply best to temperatures between 0 and -40 C, for which the measured radar reflectivities fall in the range of 0 to 25 dBZe.

Heymsfield, Andrew J.↗
NASA NTRS1984

Implantable Heart Aid

CPI's human-implantable automatic implantable defibrillator (AID) is a heart assist system, derived from NASA's space circuitry technology, that can prevent erratic heart action known as arrhythmias. Implanted AID, consisting of microcomputer power source and two electrodes for sensing heart activity, recognizes onset of ventricular fibrillation (VF) and delivers corrective electrical countershock to restore rhythmic heartbeat.

Source record↗
NASA NTRS1981

Space Derived Health Aids (AID, Heart Monitor)

CPI's spinoff from miniaturized pace circuitry is the new heart-assist device, the AID implantable automatic pulse generator. AID pulse generator monitors the heart continuously, recognizes onset of fibrillation, then administers a corrective electrical shock. A mini- computer, a power source, and two electrodes which sense heart activity are included in the unit. An associated system was also developed. It includes an external recorder to be worn by AID patients and a physician's console to display the data stored by the recorder. System provides a record of fibrillation occurrences and the ensuing defibrillation.

Source record↗
NASA NTRS2003

Airborne Studies in the Arctic in Support of FIRE-III

This grant supported (i) the participation of the University of Washington's (UW) Cloud and Aerosol Research Group (CARG), with its Convair-580 research aircraft, in the FIRE-ACE field study in the Arctic; (ii) analyses of portions of the data collected; (iii) presentation of results at conferences and workshops; (iv) formal publication of results; and, (v) archiving of the data collected by the UW/CARG. The UW/CARG Convair-580 flew twenty-three research flights, totaling over 97 research hours, in the FIRE-ACE field study during the period 19 May through 24 June 1998. Six flights were beneath the NASA ER-2 aircraft, eight flights over the instrumented SHEBA ship, and eleven flights over the DOE ARM site in Barrow, Alaska. Measurements of cloud radiative properties and cloud structures were obtained in stratus, altocumulus and cirrus clouds. Aerosol measurements were obtained in polluted arctic haze, and in very clean conditions. Several new instruments were flown on the UW Convair-580, including the Gerber g-meter, the NASA/Goddard spectral full-scanning radiometer, and the SPEC cloud particle imager (CPI). A complete listing of all of the UW Convair-580 flights in FIRE-ACE is given in the report by Hobbs listed as (ii) in Section 3 below. The UW/CARG focussed its own analyses of these data on the airborne in situ measurements of clouds and aerosols. This resulted in five formal publications, covering topics ranging from the production of aerosols by clouds and aerosol effects on surface heating in the arctic, to the structures of arctic clouds and comparisons of in situ measurements of cloud structures with deductions from remote sensing measurements.

Hobbs, Peter V.↗
NASA NTRS2004

Convective transport of reactive constituents to the tropical and mid-latitude tropopause region: I. Observations

Measurements of ozone, reactive carbon and nitrogen, and other trace constituents from flights of the NASA WB-57F aircraft in the upper troposphere and lower stratosphere reveal that convection in the tropics can present a complex mix of surface-emitted constituents right up to the altitude of the lapse rate tropopause. At higher latitudes over the southern US, the strongest transport signal, in terms of constituent mixing ratios, occurred in the potential temperature range of 340-350K or approximately over the altitude range of 9-11km. Weaker convective signals were also seen up to near the tropopause. There was no evidence of convective transport directly into the lower stratosphere from these flights. $CPY 2003 Elsevier Ltd. All rights reserved.

Transport signals↗
NASA NTRS2004

Novel Micro ElectroMechanical Systems (MEMS) Packaging for the Skin of the Satellite

This paper includes a discussion of the novel packaging techniques that are needed to place MEMS based thermal control devices on the skin of various satellites, eliminating the concern associated with potential particulates &om integration and test or the launch environment. Protection of this MEMS based thermal device is achieved using a novel polymer that is both IR transmissive and electrically conductive. This polymer was originally developed and qualified for space flight application by NASA at the Langley Research Center. The polymer material, commercially known as CPI, is coated with a thin layer of ITO and sandwiched between two window-like frames. The packaging of the MEMS based radiator assembly offers the benefits of micro-scale devices in a chip on board fashion, with the level of protection generally found in packaged parts.

Darrin, M. Ann↗
NASA NTRS2005

Lower Thermospheric Composition Studies in the Auroral Zone

This TIMED/CEDAR grant had two major objectives. The GUVI instrument on TIMED should routinely produces maps of the flux of energetic particles and their average energy. However, while those data will be available soon there were no plans to routinely produce the O/N2 ratio in the auroral. Ground-based photometric techniques have been available for years which routinely measure all three quantities in the auroral zone. The first objective of the previous proposal was to use these ground-based techniques to provide some validation for the routine measure of average energy. The second objective was to use the ground-based to data to validate GUVI algorithms for the measure of O/N2 in the auroral zone. We have made some progress to these goals while we await the release of the properly precessed GUVI data. For now these objectives are being addressed by making use of algorithms by one of us (Doug Strickland of CPI) that are being used for specific GUVI level 1B data sets that contain data coincident with the groundbased measurements. Also we have collected ground-based data from two Alaska sites and they are available on our web site and on the CEDAR website. The details of the progress we have made are discussed.

Hecht, James↗
NASA NTRS2009

Simulated Tip Rub Testing of Low-Density Metal Foam

Preliminary acoustic studies have indicated that low-density, open-cell, metal foams may be suitable acoustic liner material for noise suppression in high by-pass engines. Metal foam response under simulated tip rub conditions was studied to assess whether its durability would be sufficient for the foam to serve both as a rub strip above the rotor as well as an acoustic treatment. Samples represented four metal alloys, nominal cell dimensions ranging from 60 to 120 cells per inch (cpi), and relative densities ranging from 3.4 to 10 percent. The resulting rubbed surfaces were relatively smooth and the open cell structure of the foam was not adversely affected. Sample relative density appeared to have significant influence on the forces induced by the rub event. Acoustic responses of various surface preparations were measured using a normal incidence tube. The results of this study indicate that the foam s open-cell structure was retained after rubbing and that the acoustic absorption spectra variation was minimal.

Bowman, Cheryl L.↗
NASA NTRS2012

DSN Aperture Enhancement Project Office

All contracts are underway for antennas, associated facilities modifications and new transmitters. High risk CPI 100kW klystron and JPL high power uplink microwave components have been designed, prototyped and successfully tested at GDSCC to support the 80kW transmitter implementation and testing at vendor facility. Open issues, which might affect project delivery date, have plans in place or are being created, to maintain DSS-35 Operational Date. There are no known open issues that affect performance. Overall good progress has been made in all areas (procurements, contracts, design and development) and the project is confident that DSS-35 & 36 antennas and the three 80kW Uplink systems will be delivered according to plan.

DSN Aperture Enhancement Project (DAEP)↗
NASA NTRSDate not supplied

TPSAS-NF1676L-18612-DND

Can a space-based elastic backscatter lidar and coincident infrared radiometer recognize the varied microphysical properties observed by aircraft-based cloud probes in cirrus clouds? If so, then the global and continuous coverage provided by the satellite instruments can extend the knowledge about cirrus cloud properties gained from intensive aircraft field campaigns. The recent Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEAC4RS) aircraft field mission that occurred during August and September, 2013 is an ideal data set to use to test whether this is possible. During SEAC4RS there was extensive sampling of cirrus clouds occurring in widely varied conditions, including the North American Monsoon, forest fires, midlatitude frontal convection and tropical convection. Aircraft cloud probe sampling (2D-S, FCDP or FSSP, CPI) was performed from three airplanes, often coordinated with remote sensing by an aircraft-based elastic backscatter lidar (CPL). During the mission the CALIPSO satellite also observed these clouds from space with a similar elastic backscatter lidar (CALIOP) and an infrared radiometer (IIR). There are several cases where the airplanes sampled directly along the satellite track, but also many overpasses of the region and these features that were not coincident with the aircraft-based sampling. This presentation seeks to address the question of whether relationships between the cloud particle size distribution measurements and habits observed by the SPEC cloud probes and CPL aircraft lidar parameters can be up-scaled to classify the CALIPSO satellite observations from this region and time period. The lidar can also provide cloud top information and evidence of whether there was irreversible transport of ice and aerosols into the UT/LS.

Melody Avery↗
NASA NTRS2004

System design, modelling, and tracking filter for bearings only analog camera

In this paper, each subsystem of the Celestial Sensor is discussed with emphasis given to the filtering algorithms. The celestial sensor software processes sequential frame based bearing measurements on a peripheral CPY specifically designed for this application. A frame preprocessor is used to normalize each bearing measurement and apply a number of accept/reject rules. The accepted set of measurements is then passed to an Extended Kalman Filter (EKP) that is tuned to track the motion of the robot within the room.

Ahmed, Asif↗