SEARCH · Search NASA

Results for “Central composite designs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Segmented Solid Surface Reflector Concentrically Stacked With Tubular Shape Memory Composite Hinges

A new architecture for solid surface reflector antennas scalable to sizes greater than 10 m is presented. The design uses compact, light, and simple advanced deployable structures to create sub-reflectors that can be assembled in space into larger units using a robotic arm. The seven-panel hexagonal sub-reflector is divided into hexagonal panels that stack concentrically and vertically. The central panel is connected to each side panel on the back side by a pair of tubular shape memory composite hinges that enable the required deployment kinematics with controlled dynamics. A secondary mechanism closes the interpanel gap. The focus of the paper is on the development of the sub-reflector elements, namely the tubular hinges that use embedded heaters and sensors for triggering and control, the actuation mechanisms, and the lightweight sandwich construction reflector panels. A parametric study using finite element analyses was conducted to assess how design features of the hinge affect its stowage and deployment dynamics. The preliminary component fabrication and testing results for the two-panel assembly breadboard model are outlined. Finally, the results of the test campaign with the brassboard reflector model are presented. A comparison of deployed reflector surface deviation between the measured surface after the stowage and deployment process and the pre-test scans and the nominal surface revealed root mean square errors of less than 1 mm, as required by X-band radiofrequency transmission.

gravity offloading↗

NASA NTRSDate not supplied

Segmented Hexagonal Antenna Reflector Concentrically Stacked Using Shape Memory Composite Tubular Hinges

gravity offloading methods↗

NASA NTRS2021

Testing of Composite Stiffened Panels with Mid-Length Lateral Notches

Two hat-stiffened carbon-epoxy panels were loaded to failure to determine their failure load and mode under the Advanced Composites Project (ACP) Rapid Design Tools activity. Each specimen contained a lateral notch located at the mid-length location which severed the central stiffener. A description of the specimens, instrumentation, test fixtures and procedures is presented, followed by the presentation of the experimental results.

Dawn C Jegley↗

NASA NTRS1988

Innovative design of composite structures: Further studies in the use of a curvilinear fiber format to improve structural efficiency

Further studies to determine the potential for using a curvilinear fiber format in the design of composite laminates are reported. The curvilinear format is in contrast to the current practice of having the fibers aligned parallel to each other and in a straight line. The problem of a plate with a central circular hole is used as a candidate problem for this study. The study concludes that for inplane tensile loading the curvilinear format is superior. The limited results to date on compression buckling loads indicate that the curvilinear designs are poorer in resistant buckling. However, for the curvilinear design of interest, the reduction in buckling load is minimal and so overall there is a gain in considering the curvilinear design.

Hyer, Michael W.↗

NASA NTRSDate not supplied

Segmented Hexagonal Antenna Reflector Concentrically Stacked Using Shape Memory Composite Tubular Hinges

A new architecture for solid surface reflector antennas scalable to sizes greater than 10 m is presented. The design combines the compact, lightness and simplicity characteristics of advanced deployable structures to create sub-reflectors that can be assembled in space into larger units using a robotic arm and operations under development by a related parallel project. The seven-panel hexagonal sub-reflector is divided into hexagonal panels of that efficiently stack concentrically and vertically. The central panel is connected to each side panel on the back side by a pair of tubular shape memory composite hinges that enable the required deployment kinematics. A secondary mechanism ultimately closes the interpanel gap. The focus of the paper is on the development of the sub-reflector elements, namely the tubular hinges that use embedded heaters and sensors for actuation, the actuation mechanisms, and the lightweight sandwich construction panels. A finite element analysis parametric study assessed how design features of the hinge affect its stowage and deployment dynamics. The component fabrication and testing plans for the two-panel assembly breadboard model are outlined.

deployable reflectors↗

NASA NTRSDate not supplied

Segmented Hexagonal Antenna Reflector Concentrically Stacked Using Shape Memory Composite Tubular Hinges

deployable reflectors↗

DOE OSTI2022

Synergistic effects of chlorine substitution in sulfide electrolyte solid state batteries

All-solid-state battery is considered as one of the most promising competitors to Li ion batteries. Two widely known performance metrics for solid electrolytes, among others, are ionic conductivity and stability. In this study, it is found that both can be improved by the synergistic effects of chlorine substitution in sulfide-based solid electrolytes. Particularly, instabilities arising from both bulk decompositions and interfacial reactions to electrodes can be better inhibited in the chlorine substituted sulfide solid electrolytes through the increased susceptibility to the mechanical constriction induced enhancement of voltage stability. As a result, the stability window of some chlorine-rich Li-argyrodites can be systematically higher than some other chlorine-deficient or chlorine-free electrolytes, especially under the implementation of the mechanical constriction battery assembly and test conditions. Thus, a solid-state battery system of 4 V to 5 V-class cathodes paired with lithium metal anode is demonstrated using these chlorine-rich Li-argyrodites without additional coatings. Furthermore, since Cl composition modulates the stability and instability of Li-argyrodite at low voltages, it allows us to design a multilayer configuration with a hierarchy of Li metal stabilities to demonstrate the stable cycling at relatively high current densities for solid-state batteries. It is found that a moderate Cl composition in the electrolyte is the best to inhibit Li dendrite penetration as the central electrolyte layer, emphasizing a slightly increased “instability” as the hidden performance metric of relevance here, in addition to the two well-known metrics of stability and ionic conductivity. The understanding of the chlorine substitution effect in sulfide electrolytes provides an important design principle for all-solid-state batteries.

25 ENERGY STORAGE↗

NASA NTRS1991

Shear buckling of specially orthotropic plates with centrally located cutouts

There is significant industry demand for a method of analyzing the shear buckling of composite plates with cutouts. This method should be able to easily accommodate frequent changes in model design; inflexibility being the major drawback to current finite element methods. The approach taken here is broken into two problems, prebuckling and buckling. To solve for the prebuckling stresses, complex variable equations are used in conjunction with boundary collocation. The least squares approach is utilized to improve the accuracy of the results. The buckling problem is solved using the Ritz method. A product of the Ritz method is a complicated integral equation which is solved using numerical integration. To date, the aforementioned method of determining the prebuckling stresses was verified against infinite plate theory and finite elements. Recent efforts have focused on reducing run time, improving accuracy and adding more boundary condition choices.

Klang, Eric C.↗

NASA NTRS1990

Shear buckling of specially orthotropic plates with centrally located cutouts

There is significant industry demand for a method of analyzing the shear buckling of composite plates with cutouts. This method should be able to easily accommodate frequent changes in model design; inflexibility is the major drawback to current finite element methods. The approach taken here is broken into two problems, prebuckling and buckling. To solve for the prebuckling stresses, complex variable equations are used in conjunction with boundary collocation. The least squares approach is utilized to improve the accuracy of the results. The buckling problem is solved using the Ritz method. A product of the Ritz method is a complicated integral equation which is solved using numerical integration. To date, the aforementioned method of determining the prebuckling stresses was verified against infinite plate theory and finite elements.

Owen, Vicki L.↗

NASA NTRS1996

Design and Performance Improvements of the Prototype Open Core Flywheel Energy Storage System

A prototype magnetically suspended composite flywheel energy storage (FES) system is operating at the University of Maryland. This system, designed for spacecraft applications, incorporates recent advances in the technologies of composite materials, magnetic suspension, and permanent magnet brushless motor/generator. The current system is referred to as an Open Core Composite Flywheel (OCCF) energy storage system. This paper will present design improvements for enhanced and robust performance. Initially, when the OCCF prototype was spun above its first critical frequency of 4,500 RPM, the rotor movement would exceed the space available in the magnetic suspension gap and touchdown on the backup mechanical bearings would occur. On some occasions it was observed that, after touchdown, the rotor was unable to re-suspend as the speed decreased. Additionally, it was observed that the rotor would exhibit unstable oscillations when the control system was initially turned on. Our analysis suggested that the following problems existed: (1) The linear operating range of the magnetic bearings was limited due to electrical and magnetic saturation; (2) The inductance of the magnetic bearings was affecting the transient response of the system; (3) The flywheel was confined to a small movement because mechanical components could not be held to a tight tolerance; and (4) The location of the touchdown bearing magnifies the motion at the pole faces of the magnetic bearings when the linear range is crucial. In order to correct these problems an improved design of the flywheel energy storage system was undertaken. The magnetic bearings were re-designed to achieve a large linear operating range and to withstand load disturbances of at least 1 g. The external position transducers were replaced by a unique design which were resistant to magnetic field noise and allowed cancellation of the radial growth of the flywheel at high speeds. A central rod was utilized to ensure the concentricity of the magnetic bearings, the motor/generator, and the mechanical touchdown bearings. In addition, the mechanical touchdown bearings were placed at two ends of the magnetic bearing stack to restrict the motion at pole faces. A composite flywheel was made using a multi-ring interference assembled design for a high specific energy density. To achieve a higher speed and better efficiency, a permanent magnet DC brushless motor was specially designed and fabricated. A vacuum enclosure was constructed to eliminate windage losses for testing at high speeds. With the new improvements the OCCF system was tested to 20,000 RPM with a total stored energy of 15.9 WH and an angular momentum of 54.8 N-m-s (40.4 lb-ft-s). Motor current limitation, caused by power loss in the magnetic bearings, was identified as causing the limit in upper operating speed.

Pang, D.↗

DOE OSTI2023

Design of Diverse Asymmetric Pockets in De Novo Homo-oligomeric Proteins

A challenge for design of protein–small-molecule recognition is that incorporation of cavities with size, shape, and composition suitable for specific recognition can considerably destabilize protein monomers. This challenge can be overcome through binding pockets formed at homo-oligomeric interfaces between folded monomers. Interfaces surrounding the central homo-oligomer symmetry axes necessarily have the same symmetry and so may not be well suited to binding asymmetric molecules. To enable general recognition of arbitrary asymmetric substrates and small molecules, we developed an approach to designing asymmetric interfaces at off-axis sites on homo-oligomers, analogous to those found in native homo-oligomeric proteins such as glutamine synthetase. We symmetrically dock curved helical repeat proteins such that they form pockets at the asymmetric interface of the oligomer with sizes ranging from several angstroms, appropriate for binding a single ion, to up to more than 20 Å across. Of the 133 proteins tested, 84 had soluble expression in E. coli, 47 had correct oligomeric states in solution, 35 had small-angle X-ray scattering (SAXS) data largely consistent with design models, and 8 had negative-stain electron microscopy (nsEM) 2D class averages showing the structures coming together as designed. Both an X-ray crystal structure and a cryogenic electron microscopy (cryoEM) structure are close to the computational design models. The nature of these proteins as homo-oligomers allows them to be readily built into higher-order structures such as nanocages, and the asymmetric pockets of these structures open rich possibilities for small-molecule binder design free from the constraints associated with monomer destabilization.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS1997

Changes in Thermospheric O/N2 Derived from UVI Auroral Images

A rigorous test of our understanding of the coupled ionosphere-thermosphere and its response to geomagnetic storms is the ability to reproduce observed storm effects as seen in the ionosphere and neutral atmosphere. The concept of compositional change is central to studies of thermosphere response to storm conditions. In particular, information about compositional change within the highly dynamic auroral region is limited. The Ultraviolet Imager (UVI) is designed to view the full auroral region using five filters to isolate emissions from atomic oxygen (1304 and 1356) and N2 LBH. This spectral resolution allows auroral energy characteristics to be derived by two separate methods from examining ratios of observed intensities (OI 1356/LBHL or LBHS/LBHL). The LBHS:LBHL ratio is typically used as the mean energy diagnostic since the OI 1356 emission is dependent on changes in the atomic oxygen density, and these changes relative to N2 can be large. However, once the mean energy has been specified by the LBH ratio, this variability in OI 1356 emission can be exploited as a direct diagnostic of total atomic oxygen column density. This opens the potential of using UVI images to monitor the temporal and spatial response of thermospheric O to high latitude forcing within the auroral regions. Initial results of this type of analysis will be presented along with discussion of its limitations and capabilities.

Germany, G. A.↗

NASA NTRS2000

Scientific Objectives of the Mars Surveyor 2001 Gamma-Ray Spectrometer

The Gamma-Ray Spectrometer (GRS) is one of the instruments on the Mars Surveyor 2001 Orbiter, which is part of NASA's Mars-Surveyor program. The GRS is really an instrument suite consisting of the GRS, a neutron spectrometer (NS), and a high-energy neutron detector (FIEND). Each of these instruments/sensors are remotely mounted at different locations on the spacecraft and connect to a central electronics box. The GRS will achieve global mapping of the elemental composition of the surface and the abundance of hydrogen in the shallow subsurface. It is an updated design using the same technology as the lost Mars Observer mission. The Martian surface is continuously bombarded by cosmic ray particles; their interactions with the constituents of the soil produces nuclear reaction cascades with fast neutrons being the main secondaries. Those neutrons interact in turn with the nuclei of the elements that make up the soil and they eventually get slowed to thermal energies. In this process they leave the nuclei in an excited state that decays via the emission of characteristic gamma rays. All these processes are precisely known and have been simulated by means of numerical models. Thus, remote gamma-ray spectroscopy is a useful method for quantitatively measuring the geochemical composition of the surface down to a few tens of g/sq cm. Additional information is contained in original extended abstract.

Boynton, W. V.↗

NASA NTRS2018

Investigation of Stiffening and Curvature Effects on the Residual Strength of Composite Stiffened Panels with Large Transverse Notches

Design of robust aircraft structure requires consideration of the load-carrying capability with large damage. Large notches, typically introduced as machined cracks (aka "notches") severing a single skin bay and a central stiffening member, are often used to conservatively address the wide range of possible large damage scenarios. The objective of the current effort was to develop more generalized and rapid analysis methods addressing large-notch residual strength of stiffened panels to support preliminary design activities..

Enjuto, Patrick↗

NASA NTRS2019

Investigation of Stiffening Effects on Notch Growth Trajectory of Composite Stiffened Panels with Large Transverse Notches

Design of robust aircraft structure requires consideration of the load-carrying capability with large damage. Large notches, typically introduced as machined cracks (aka “notches”) severing a single skin bay and a central stiffening member, are often used to conservatively address the wide range of possible large damage scenarios. The objective of current effort was to explore the viability of developing preliminary laminate-based methods for predicting crack turning at the adjacent stiffener using traditional fracture mechanics concepts.

Enjuto, Patrick↗

NASA NTRS1990

Innovative design of composite structures: The use of curvilinear fiber format in composite structure design

The gains in structural efficiency are investigated that can be achieved by aligning the fibers in some or all of the layers in a laminate with the principal stress directions in those layers. The name curvilinear fiber format is given to this idea. The problem studied is a plate with a central circular hole subjected to a uniaxial tensile load. An iteration scheme is used to find the fiber directions at each point in the laminate. Two failure criteria are used to evaluate the tensile load capacity of the plates with a curvilinear format, and for comparison, counterpart plates with a conventional straightline fiber format. The curvilinear designs for improved tensile capacity are then checked for buckling resistance. It is concluded that gains in efficiency can be realized with the curvilinear format.

Hyer, M. W.↗

NASA NTRS1989

The use of curvilinear fiber format in composite structure design

This paper investigates the gains in structural efficiency that can be achieved by aligning the fibers in some or all of the layers in a laminate with the principal stress directions in those layers. The name curvilinear fiber format is given to this idea. The problem studied is a plate with a central circular hole subjected to a uniaxial tensile load. An iteration scheme is used to find the fiber directions at each point in the laminate. Two failure criteria are used to evaluate the tensile load capacity of the plates with a curvilinear format, and for comparison, counterpart plates with a conventional straightline fiber format. The curvilinear designs for improved tensile capacity are then checked for buckling resistance. It is concluded that gains in efficiency can be realized with the curvilinear format.

Hyer, M. W.↗

DOE OSTI2023

Walking the ‘design–build–test–learn’ cycle: flux analysis and genetic engineering reveal the pliability of plant central metabolism

Oilseeds are of great economic importance for food and animal feed and their contribution to renewable energy production. Soybean seeds (Glycine max (L.) Merr.) contain c. 40% protein, 20% oil, and 30% carbohydrate (Song et al., 2023). Due to the massive scale of soybean production worldwide, even small improvements in seed protein and oil content make economic sense (Song et al., 2023). Successful manipulation of seed composition largely depends on a thorough understanding of the processes and pathways involved in the biosynthesis of fatty acids and amino acids, which are the building blocks of lipids and proteins. Rational engineering of the synthesis of storage reserves, that is, the rerouting of metabolic flux in central metabolism, is difficult to accomplish due to the complexity of the central metabolic network, the intricate regulation of its enzymes at multiple levels, and the often-unpredictable effects of genetic manipulation (Sweetlove et al., 2017). Therefore, the advancement of our understanding of central metabolism and its control of carbon partitioning requires following an iterative ‘design–build–test–learn’ (DBTL) cycle (Lin & Eudes, 2020) where metabolic flux analysis and hypothesis testing by transgenic approaches are important components. Previous metabolic studies on soybeans using isotopic tracers and metabolic flux analysis have provided insight into how lipid and protein biosynthesis occurs simultaneously during seed development (Allen et al., 2009; Allen & Young, 2013; Kambhampati et al., 2021). In an article published in this issue of New Phytologist, Morley et al. (2023; 1834–1851) put the insights they have gained into the delivery of metabolic precursors and energy cofactors to oil synthesis to the test and arrive at a successful metabolic engineering design. They show that an increase in seed oil content in soybeans can be achieved by overexpression of malic enzyme (ME) during seed development. Malic enzyme refers to a class of decarboxylating malate dehydrogenase enzymes that oxidize malate with NAD + or NADP + as redox cofactor while generating pyruvate and CO 2 . Like higher plants in general, soybean has distinct NADH- or NADPH-producing ME isoforms localized to the cytosol, plastid, or mitochondria (Gerrard Wheeler et al., 2016). As Morley et al. show, an increase in seed oil can be achieved in particular when a NADP+-dependent enzyme isoform (EC 1.1.1.40) is overexpressed in the plastid. Given the complex compartmentalization of pyruvate, malate, and redox metabolism (Fig. 1), increased oil production appears to depend on additional pyruvate and reducing equivalents being produced in the same compartment where de novo fatty acid biosynthesis occurs: the plastid.

59 BASIC BIOLOGICAL SCIENCES↗