SEARCH · Search NASA

Results for “Chain”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS1971

Comparisons of the polypeptide chains of globins.

Discussion of the amino acid differences and minimum base differences per codon due to mutations which took place during divergent evolution of vertebrates from a common ancestral gene. The ?random mutation model' of evolution is examined by comparing a carp alpha Hb chain and six mammalian alpha Hb chains in terms of the genetic code. The occurrence of recognizable three-base changes is analyzed and a summary of the distribution of changes in the hemoglobin and myoglobin chains is given for 148 sites.

Jukes, T. H.↗

NASA NTRS1974

The Mendeleev Crater chain: A description and discussion of origin

A 113-kilometer-long crater chain on the floor of Mendeleev Crater is the best morphological example of several similar chains on the lunar far side. Age relationships relative to Mendeleev Crater indicate that it is a younger feature that may have developed over a fault parallel to the lunar grid system. The dumbbell shape of the chain may be related to a differential stress along a fault crossing the floor that resulted in varying resistance to magma invasion.

Eppler, D.↗

NASA NTRS1974

Laboratory simulation of the herringbone pattern associated with lunar secondary crater chains

V-shaped ridge components of the herringbone pattern associated with lunar secondary crater chains have been simulated by simultaneous and nearly simultaneous impact of two projectiles near one another. The impact velocities and angles of the projectiles were similar to those of the fragments that produced secondary craters found at various ranges from large lunar craters. Variables found to affect the included angles of the V-shaped ridges are: relative time of impact of the projectiles, impact angle, relative projectile mass, and azimuth angle of the crater chain relative to the projection of the flight line onto the target surface. The functional relationships between the forms of the ridges and many of these variables are similar to those observed for lunar V-shaped ridges. Comparison of the magnitudes of the ridge angles of both laboratory crater pairs and secondary crater chains of the crater Copernicus implies that material was ejected from Copernicus at angles in excess of 60 deg, measured from the normal, to form many of Copernicus' satellite craters.

Oberbeck, V. R.↗

NASA NTRS1974

On the dynamics of chain systems

A computer-oriented method for obtaining dynamical equations of motion for chain systems is presented. A chain system is defined as an arbitrarily assembled set of rigid bodies such that adjoining bodies have at least one common point and such that closed loops are not formed. The equations of motion are developed through the use of Lagrange's form of d'Alembert's principle. The method and procedure is illustrated with an elementary study of a tripod space manipulator. The method is designed for application with systems such as human body models, chains and cables, and dynamic finite-segment models.

Huston, R. L.↗

NASA NTRS1976

Comparison of chain sampling plans with single and double sampling plans

The efficiency of chain sampling is examined through matching of operating characteristics (OC) curves of chain sampling plans (ChSP) with single and double sampling plans. In particular, the operating characteristics of some ChSP-0, 3 and 1, 3 as well as ChSP-0, 4 and 1, 4 are presented, where the number pairs represent the first and the second cumulative acceptance numbers. The fact that the ChSP procedure uses cumulative results from two or more samples and that the parameters can be varied to produce a wide variety of operating characteristics raises the question whether it may be possible for such plans to provide a given protection with less inspection than with single or double sampling plans. The operating ratio values reported illustrate the possibilities of matching single and double sampling plans with ChSP. It is shown that chain sampling plans provide improved efficiency over single and double sampling plans having substantially the same operating characteristics.

Stephens, K. S.↗

NASA NTRS1976

Two-stage chain sampling inspection plans with different sample sizes in the two stages

A further generalization of the family of 'two-stage' chain sampling inspection plans is developed - viz, the use of different sample sizes in the two stages. Evaluation of the operating characteristics is accomplished by the Markov chain approach of the earlier work, modified to account for the different sample sizes. Markov chains for a number of plans are illustrated and several algebraic solutions are developed. Since these plans involve a variable amount of sampling, an evaluation of the average sampling number (ASN) is developed. A number of OC curves and ASN curves are presented. Some comparisons with plans having only one sample size are presented and indicate that improved discrimination is achieved by the two-sample-size plans.

Stephens, K. S.↗

NASA NTRS1979

The condition of a finite Markov chain and perturbation bounds for the limiting probabilities

The inequalities bounding the relative error the norm of w- w squiggly/the norm of w are exhibited by a very simple function of E and A. Let T denote the transition matrix of an ergodic chain, C, and let A = I - T. Let E be a perturbation matrix such that T squiggly = T - E is also the transition matrix of an ergodic chain, C squiggly. Let w and w squiggly denote the limiting probability (row) vectors for C and C squiggly. The inequality is the best one possible. This bound can be significant in the numerical determination of the limiting probabilities for an ergodic chain. In addition to presenting a sharp bound for the norm of w-w squiggly/the norm of w an explicit expression for w squiggly will be derived in which w squiggly is given as a function of E, A, w and some other related terms.

Meyer, C. D., Jr.↗

NASA NTRS1979

Long chain carbon molecules and diffuse interstellar lines

An estimate of the abundances of chain hydrocarbon molecules expected in dense interstellar clouds as a result of gas-phase chemistry alone supports the hypothesis that the long chain molecules are responsible for the diffuse interstellar lines seen in the optical spectra of stars lying behind fairly low-density interstellar clouds. In particular, it is shown that the equilibrium abundances of the long chain carbon molecules may remain quite high even for molecules with as many as 11 carbon atoms.

Mitchell, G. F.↗

NASA NTRS1981

The abundance and excitation of the carbon chains in interstellar molecular clouds

Emission lines from the carbon chains HC3N, HC5N, HC7N and HC9N were observed at 3 mm, 7 mm, and 1.4 cm in a number of dark clouds, Orion A and IRC(plus)10216. Non-LTE models were constructed to describe excitation and column densities. Component models for the Taurus dark cloud TMC-1 suggested that relative molecular abundances do not vary substantially along the cloud ridge, whereas the H2 density does by a factor of three. Data available for other dark clouds showed that the decrease in abundance with length from one carbon chain to the next is nearly constant, being close to 2.3. The decline in carbon chain abundance with length is steeper in Orion KL than in dark clouds by a factor of approximately four. Abundance ratios derived for the carbon star IRC(plus)10216 are uncertain, due to difficulties in modeling excitation rates in this environment.

Bujarrabal, V.↗

NASA NTRS1984

Control-Chain Safety Tray and Friction Pull

Tray mounted above suspended ceiling keeps sprinkler-system control chain safely out of way of pedestrian traffic below. Tray reached easily by using fireman's hook short stepladder, or chair or by jumping up to grasp chain. Safety tray used for infrequently used control chains on vents and dampers.

Hajdik, G.↗

NASA NTRS1987

Signal chain for the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS)

The AVIRIS instrument has a separate dedicated analog signal processing chain for each of its four spectrometers. The signal chains amplify low-level focal-plane line array signals (5 to 10 mV full-scale span) in the presence of larger multiplexing signals (approx 150 mV) providing the data handling system a ten-bit digital word (for each spectrometer) each 1.3 microns. This signal chain provides automatic correction for the line array dark signal nonuniformity (which can approach the full-scale signal span).

Bunn, James S., Jr.↗

NASA NTRS1988

Markov chains for testing redundant software

A preliminary design for a validation experiment has been developed that addresses several problems unique to assuring the extremely high quality of multiple-version programs in process-control software. The procedure uses Markov chains to model the error states of the multiple version programs. The programs are observed during simulated process-control testing, and estimates are obtained for the transition probabilities between the states of the Markov chain. The experimental Markov chain model is then expanded into a reliability model that takes into account the inertia of the system being controlled. The reliability of the multiple version software is computed from this reliability model at a given confidence level using confidence intervals obtained for the transition probabilities during the experiment. An example demonstrating the method is provided.

White, Allan L.↗

NASA NTRS1988

Load balancing and closed chain multiple arm control

The authors give the general dynamical equations for several rigid link manipulators rigidly grasping a commonly held rigid object. It is shown that the number of arm-configuration degrees of freedom lost due to imposing the closed-loop kinematic constraints is the same as the number of degrees of freedom gained for controlling the internal forces of the closed-chain system. This number is equal to the dimension of the kernel of the Jacobian operator which transforms contact forces to the net forces acting on the held object, and it is shown that this kernel can be identified with the subspace of controllable internal forces of the closed-chain system. Control of these forces makes it possible to regulate the grasping forces imparted to the held object or to control the load taken by each arm. It is shown that the internal forces can be influenced without affecting the control of the configuration degrees of freedom. Control laws of the feedback linearization type are shown to be useful for controlling the location and attitude of a frame fixed with respect to the held object, while simultaneously controlling the internal forces of the closed-chain system. Force feedback can be used to linearize and control the system even when the held object has unknown mass properties. If saturation effects are ignored, an unconstrained quadratic optimization can be performed to distribute the load optimally among the joint actuators.

Kreutz, Kenneth↗

NASA NTRS1988

Signal chain for the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS)

Bunn, James S., Jr.↗

NASA NTRS1989

Metabolism of branched-chain amino acids in leg muscles from tail-cast suspended intact and adrenalectomized rats

The effects of muscle unloading, adrenalectomy, and cortisol treatment on the metabolism of branched-chain amino acids in the soleus and extensor digitorum longus of tail-cast suspended rats were investigated using C-14-labeled lucine, isoleucine, and valine in incubation studies. It was found that, compared to not suspended controls, the degradation of branched-chain amino acids in hind limb muscles was accelerated in tail-cast suspended rats. Adrenalectomy was found to abolish the aminotransferase flux and to diminish the dehydrogenase flux in the soleus. The data also suggest that cortisol treatment increases the rate of metabolism of branched-chain amino acids at the dehydrogenase step.

Jaspers, Stephen R.↗

NASA NTRS1991

Hexagonal and nematic phases of chains. I - Correlation functions. II - Phase transitions

The statistical mechanics of a system of semiflexible chains, which can represent polymer liquid crystals, long-chain biomolecules, stiff wormlike micelles, or columns of discotic liquid crystals, are examined. A continuum theory is used to calculate static correlation functions in the hexagonal and nematic phases. Two correlation functions are considered: (1) the structure factor which describes fluctuations in the density; and (2) the director fluctuation spectrum, which describes fluctuations in the local optical axis. In addition, a model is developed for the phase transitions of a system of infinitely long, semiflexible chains which interact through a steric, excluded-volume repulsion. The model yields generic phase diagrams in terms of pressure or density vs. persistence length or temperature.

Selinger, Jonathan V.↗

NASA NTRS1994

On the utility of the multi-level algorithm for the solution of nearly completely decomposable Markov chains

Recently the Multi-Level algorithm was introduced as a general purpose solver for the solution of steady state Markov chains. In this paper, we consider the performance of the Multi-Level algorithm for solving Nearly Completely Decomposable (NCD) Markov chains, for which special-purpose iteractive aggregation/disaggregation algorithms such as the Koury-McAllister-Stewart (KMS) method have been developed that can exploit the decomposability of the the Markov chain. We present experimental results indicating that the general-purpose Multi-Level algorithm is competitive, and can be significantly faster than the special-purpose KMS algorithm when Gauss-Seidel and Gaussian Elimination are used for solving the individual blocks.

Leutenegger, Scott T.↗

NASA NTRS1995

Fibonacci chain polynomials: Identities from self-similarity

Fibonacci chains are special diatomic, harmonic chains with uniform nearest neighbor interaction and two kinds of atoms (mass-ratio r) arranged according to the self-similar binary Fibonacci sequence ABAABABA..., which is obtained by repeated substitution of A yields AB and B yields A. The implications of the self-similarity of this sequence for the associated orthogonal polynomial systems which govern these Fibonacci chains with fixed mass-ratio r are studied.

Lang, Wolfdieter↗