Search NASA⌕ Search

SEARCH · Search NASA

Results for “Charge matching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Positive charging of grains in an afterglow plasma is enhanced by ions drifting in an electric field

In a plasma, the polarity of a dust grain's charge is typically negative, but it can reverse and become positive in an afterglow, when the power sustaining the plasma is switched off. This positive charging, which occurs in the afterglow's first few milliseconds, is studied for grains much larger than a few nm. It is hypothesized that the positive charging is enhanced by the presence of a dc electric field, which causes ions to drift through the neutral gas. A larger value of the reduced electric field E/N leads to a larger ion kinetic energy and thus a greater collection of positive charge on a grain. The maximum possible positive charge is attained if the grain's surface potential rises to match the ion kinetic energy, at a time before ions have departed and the grain's charge becomes frozen. Thereafter, when vacuum conditions prevail, the grain will retain its positive residual charge. In an experiment, dust grains were electrically levitated in a capacitively coupled plasma until the power was abruptly turned off. In the afterglow, grains fell faster than expected due to gravity alone, indicating a downward electric force, in the presence of a remaining dc electric field. Acceleration measurements yielded repeatable results for the residual charge's value, which was of the order +10 4 e and increased with E/N, supporting the hypothesis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Rapid charging made practical in graphite-based lithium batteries: surface-acoustic wave turbulent electrolyte mixing to overcome diffusion limited charging rates [Final Report]

One of the key limits in rapidly recharging a lithium-ion battery is the depletion of lithium ions within the electrolyte adjacent the anode during charging and long diffusion time to overcome this depletion. It also causes dendrite formation, inefficient use of the lithium, and battery degradation over many charge-discharge cycles. Because the liquid electrolyte remains quiescent and unmixed, this depletion layer’s depth rapidly grows to match the anode-cathode separation distance at even modest charge rates. The solution proposed by PI Prof. James Friend and Co-PI Prof. Ping Liu, both from the University of California, San Diego, is to mix the electrolyte and minimize the Li+ ion concentration gradient during charging. Even in the presence of the separator, the charging rate could then be significantly increased. They propose to accomplish this using surface acoustic wave (SAW)-driven acoustic streaming, a technique employing 10-mW fingernail-sized solid-state devices from the telecommunications industry to drive turbulent mixing to submicron length scales in a manner completely compatible with the typical 20700 and 18650 cells used in electric vehicles. 0.1. Turbulent acoustic streaming mixes the electrolyte during charging—even with separator Our proposed 100-MHz SAW device used to recirculate the electrolyte is compatible with lithium- ion battery electrochemistry, as it is made in our lab of single-crystal lithium niobate. Their solution is straightforward to drive from a DC power source alongside the signal provided during battery charging. The device is only needed during charging and does not consume power dur- ing battery discharge. Uniquely, SAW generates extreme accelerations of over 1 billion meters per second squared in the fluid, driving turbulent mixing from centimeter to submicron length scales, even through the porous separator materials that tend to be used in batteries, all while avoiding interfering with the anode’s solid electrolyte interphase layer that forms during use. By employing novel fluid mechanics, the investigators are proposing a new direction for battery research away from direct use of materials science and electrochemistry. The chemistry agnostic solution may be employed in any battery chemistry that makes use of liquid electrolytes, providing a broader transformative benefit to the battery research community. They are to produce a series of prismatic and 20700-cell sized 2 Ah batteries capable of being charged and discharged at least 500 times without more than 20% loss in battery capacity, and to provide analysis tools useful to the battery research and development community for adopting this approach for other battery chemistries and configurations.

25 ENERGY STORAGE↗

Rapid Charging Made Practical in Graphite-Based Lithium Batteries: Surface-Acoustic Wave Turbulent Electrolyte Mixing to Overcome Diffusion Limited Charging Rates

One of the key limits in rapidly recharging a lithium-ion battery is the depletion of lithium ions within the electrolyte adjacent the anode during charging and long diffusion time to overcome this depletion. It also causes dendrite formation, inefficient use of the lithium, and battery degradation over many charge-discharge cycles. Because the liquid electrolyte remains quiescent and unmixed, this depletion layer's depth rapidly grows to match the anode-cathode separation distance at even modest charge rates. The solution proposed by PI Prof. James Friend and Co-PI Prof. Ping Liu, both from the University of California, San Diego, is to mix the electrolyte and minimize the Li ion concentration gradient during charging. Even in the presence of the separator, the charging rate could then be significantly increased. They propose to accomplish this using surface acoustic wave (SAW)-driven acoustic streaming, a technique employing 10-mW fingernail-sized solid-state devices from the telecommunications industry to drive turbulent mixing to submicron length scales in a manner completely compatible with the typical 20700 and 18650 cells used in electric vehicles.

25 ENERGY STORAGE↗

Design Considerations for Fast Charging Lithium Ion Cells for NMC/MCMB Electrode Pairs

Lithium ion cells that can be quickly charged are of critical importance for the continued and accelerated penetration of electric vehicles (EV) into the consumer market. Considering this, the U.S. Department of Energy (DOE) has set a cell recharge time goal of 10–15 min. The following study provides an investigation into the effect of cell design, specifically negative to positive matching ratio (1.2:1 vs. 1.7:1) on fast charging performance. By using specific charging procedures based on negative electrode performance, as opposed to the industrial standard constant current constant voltage procedures, we show that the cells with a higher N:P ratio can be charged to ~16% higher capacity in the ten-minute time frame. Cells with a higher N:P ratio also show similar cycle life performance to those with a conventional N:P ratio, despite the fact that these cells experience a much higher irreversible capacity loss, leading to a lower reversible specific capacity.

25 ENERGY STORAGE↗

A formalism for extracting track functions from jet measurements

The continued success of the jet substructure program will require widespread use of tracking information to enable increasingly precise measurements of a broader class of observables. The recent reformulation of jet substructure in terms of energy correlators has simplified the incorporation of universal non-perturbative matrix elements, so called “track functions”, in jet substructure calculations. These advances make it timely to understand how these universal non-perturbative functions can be extracted from hadron collider data, which is complicated by the use jet algorithms. In this paper we introduce a new class of jet functions, which we call (semi-inclusive) track jet functions, which describe measurements of the track energy fraction in identified jets. These track jet functions can be matched onto the universal track functions, with perturbatively calculable matching coefficients that incorporate the jet algorithm dependence. We perform this matching, and present phenomenological results for the charged energy fraction in jets at the LHC and EIC/HERA at collinear next-to-leading logarithmic accuracy. We show that higher moments of the charged energy fraction directly exhibit non-linear Lorentzian renormalization group flows, allowing the study of these flows with collider data. Our factorization theorem enables the extraction of universal track functions from jet measurements, opening the door to their use for a precision jet substructure program.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An analysis of nickel cadmium batteries

Temperature effects, reconditioning, divergencies, capacity, charge rates, depth of discharge, and cell matching and their effects on battery life are discussed. The development of a practical strategy for predicting battery life by subjecting cells to simulated cyclic operation is also addressed.

Turner, J. B., Jr.↗

'Alfven wing' models of the induced electrical current system at Io - A probe of the ionosphere of Io

A novel class of models of the Alfven wing interaction between the Io plasma torus and Io's ionosphere has been developed and used to compute the magnetic field fluctuations at the position of the Voyager 1 flyby. These computations of the magnetic field signature are compared with the magnetic field measurements made during the flyby, and the differences between the model and observations are used as a probe of the structure of Io's ionosphere. The results of this model fitting indicate that a significant atmospheric neutral column density is required over a major part of the trailing hemisphere. This can be consistent with the cold-trap model for Io's neutral atmoshpere only if the major plumes near the center of the trailing hemisphere provide significant volumetric coverage. The Io plasma torus charged-mass density required for a proper match to the data is larger than earlier estimates based on the width of the Alfven wing signature.

Herbert, F.↗

Far-ultraviolet photometry of the globular cluster omega Cen

We present far-ultraviolet images of the globular cluster omega Centauri obtained with the Ultraviolet Imaging Telescope (UIT) during the 1990 December Astro-1 mission. A total of 1957 sources are detected at 1620 A to a limiting ultraviolet (UV) magnitude of 16.4 in the central 24 min diameter region of the field and a limit of 15.6 over the remainder of the 40 min diameter field. Over 1400 of these sources are matched with stars on a Stroemgren u band charge coupled devices (CCD) frame obtained with the Cerro Tololo Inter-American Observatory (CTIO) 0.9 m telescope to produce a (far-UV, u) color-magnitude diagram (CMD). Completeness of the sample and error estimates are determined by photometry of artificial stars added to the images. The horizontal branch (HB) of the CMD is heavily populated hotter than 9000 K. A large number of 'extreme HB' stars are found hotter than a conspicuous break in the HB at T(sub e) approximately 16000 K. There is also a significant population of stars above the HB, the brightest of which is 4 mag brighter than the HB. Most of the hotter of these appear to be 'AGB-manque' or 'Post-Early Asymptotic Giant Branch' stars. We compare the observations to recent theoretical evolutionary tracks for the zero-age HB and subsequent phases. The tracks match the data well, with the exception of the hotter HB stars, many of which fall below the zero-age horizontal branch. It is unclear as yet whether these are a special population or an artifact of errors in the models or photometry. We identify 33 stars with T(sub e) greater than or approximately = 50000 K, which are hotter than zero-age HB stars with envelope masses of 0.003 solar mass.

Whitney, Jonathan H.↗

Universal signatures of Dirac fermions in entanglement and charge fluctuations

We study the entanglement entropy (EE) and charge fluctuations in models where the low-energy physics is governed by massless Dirac fermions. We focus on the response to flux insertion which, for the EE, is widely assumed to be universal, i.e., independent of the microscopic details. We provide an analytical derivation of the EE and charge fluctuations for the seminal example of graphene, using the dimensional reduction of its tight-binding model to the one-dimensional Su-Schrieffer-Heeger model. Our asymptotic expression for the EE matches the conformal field theory prediction. We show that the charge variance has the same asymptotic behavior, up to a constant prefactor. To check the validity of universality arguments, we numerically consider several models, with different geometries and numbers of Dirac cones, and either for strictly two-dimensional models or for a gapless surface mode of three-dimensional topological insulators. We also show that the flux response does not depend on the entangling surface geometry as long as it encloses the flux. Finally we consider the universal corner contributions to the EE. We show that in the presence of corners, the Kitaev-Preskill subtraction scheme provides nonuniversal, geometry-dependent results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Fermi function and the neutron's lifetime

The traditional Fermi function ansatz for nuclear beta decay describes enhanced perturbative effects in the limit of large nuclear charge Z and/or small electron velocity β. We define and compute the quantum field theory object that replaces this ansatz for neutron beta decay, where neither of these limits hold. We present a new factorization formula that applies in the limit of small electron mass, analyze the components of this formula through two loop order, and resum perturbative corrections that are enhanced by large logarithms. We apply our results to the neutron lifetime, supplying the first two-loop input to the long-distance corrections. Our result can be summarized as τ n x |V ud | 2 [1 + 3λ 2 ] [1 + Δ R ] = $\frac{5263.284(17) s}{1 + 27.04(7) x 10^{-3}}$ with |V ud | the up-down quark mixing parameter, τ n the neutron's lifetime, λ the ratio of axial to vector charge, and Δ R the short-distance matching correction. We find a shift in the long-distance radiative corrections compared to previous work, and discuss implications for extractions of |V ud | and tests of the Standard Model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Amyloid-like amelogenin nanoribbons template mineralization via a low-energy interface of ion binding sites

Protein scaffolds direct the organization of amorphous precursors that transform into mineralized tissues, but the templating mechanism remains elusive. Motivated by models for the biomineralization of tooth enamel, wherein amyloid-like amelogenin nanoribbons guide the mineralization of apatite filaments, we investigated the impact of nanoribbon structure, sequence, and chemistry on amorphous calcium phosphate (ACP) nucleation. Using full-length human amelogenin and peptide analogs with an amyloid-like domain, films of β-sheet nanoribbons were self-assembled on graphite and characterized by in situ atomic force microscopy and molecular dynamics simulations. All sequences substantially reduce nucleation barriers for ACP by creating low-energy interfaces, while phosphoserines along the length of the nanoribbons dramatically enhance kinetic factors associated with ion binding. Furthermore, the distribution of negatively charged residues along the nanoribbons presents a potential match to the Ca–Ca distances of the multi-ion complexes that constitute ACP. These findings show that amyloid-like amelogenin nanoribbons provide potent scaffolds for ACP mineralization by presenting energetically and stereochemically favorable templates of calcium phosphate ion binding and suggest enhanced surface wetting toward calcium phosphates in general.

59 BASIC BIOLOGICAL SCIENCES↗

Electron image contrast analysis of mosaicity in rutile nanocrystals using direct electron detection

Direct electron detection provides high detective quantum efficiency, significantly improved point spread function and fast read-out which have revolutionized the field of cryogenic electron microscopy. However, these benefits for high-resolution electron microscopy (HREM) are much less exploited, especially for in situ study where major impacts on crystallographic structural studies could be made. By using direct detection in electron counting mode, rutile nanocrystals have been imaged at high temperature inside an environmental transmission electron microscope. The improvements in image contrast are quantified by comparison with a charge-coupled device (CCD) camera and by image matching with simulations using an automated approach based on template matching. Together, these approaches enable a direct measurement of 3D shape and mosaicity (~1°) of a vacuum-reduced TiO 2 nanocrystal about 50 nm in size. Thus, this work demonstrates the possibility of quantitative HREM image analysis based on direct electron detection.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron-impact ionization of interstellar hydrogen and helium at interplanetary shocks

We investigate the ionization of interstellar hydrogen and helium due to electron impact by shock-heated electrons. Taking the electron distributions measured at four interplanetary shocks at 1 AU, we show that the electrons in the downstream region of strong shocks can ionize interstellar atoms at rates matching or exceeding the nominal photoionization or charge-exchange rates. We suggest that this process may explain some puzzling observations of interstellar pickup ions by the Ulysses spacecraft.

Isenberg, Philip A.↗

Fifteen Years of Laboratory Astrophysics at Ames

Tremendous strides have been made in our understanding of interstellar material over the past fifteen years thanks to significant, parallel developments in two closely related areas: observational astronomy and laboratory astrophysics. Fifteen years ago the composition of interstellar dust was largely guessed at, the concept of ices in dense molecular clouds ignored, and the notion of large, abundant, gas phase, carbon-rich molecules widespread throughout the interstellar medium (ISM) considered impossible. Today the composition of dust in the diffuse ISM is reasonably well constrained to cold refractory materials comprised of amorphous and crystalline silicates mixed with an amorphous carbonaceous material containing aromatic structural units and short, branched aliphatic chains. In the dense ISM, these cold dust particles are coated with mixed-molecular ices whose compositions are very well known. Lastly, the signature of carbon-rich polycyclic aromatic hydrocarbons (PAHs), shockingly large molecules by early interstellar chemistry standards, is widespread throughout the ISM. This great progress has only been made possible by the close collaboration of laboratory experimentalists with observers and theoreticians, all with the goal of applying their skills to astrophysical problems of direct interest to NASA programs. Such highly interdisciplinary collaborations ensure fundamental, in depth coverage of the wide-ranging challenges posed by astrophysics. These challenges include designing astrophysically focused experiments and data analysis, tightly coupled with astrophysical searches spanning 2 orders of magnitude in wavelength, and detailed theoretical modeling. The impact of our laboratory has been particularly effective as there is constant cross-talk and feedback between quantum theorists; theoretical astrophysicists and chemists; experimental physicists; organic, physical and petroleum chemists; and infrared and UV/Vis astronomers. In this paper, two examples of the Ames Program will be given. We have been involved in identifying 9 out of the 14 interstellar pre-cometary ice species known, determined their abundances and the physical nature of the ice structure. Details on our ice work are given in the paper by Sandford et al. Our group is among the pioneers of the PAH model. We built the theoretical framework, participated in the observations and developed the experimental techniques needed to test the model. We demonstrated that the ubiquitous infrared emission spectrum associated with many interstellar objects can be matched by laboratory spectra of neutral and positively charged PAHs and that PAHs were excellent candidates for the diffuse interstellar band (DIB) carriers. See Salama et al. and Hudgins et al.

Allamandola, L. J.↗

Beam Dynamics simulations for ERDC project -- SRF linac for industrial use

Compact conductively cooled SRF industrial linacs can provide unique parameters of the electron beam for industrial applications. (up to 10MeV, 1MW). For ERDC project we designed normal conducting RF injector with thermal RF gridded gun integrated in first cell of multi-cell cavities. For design of the RF gun we used MICHELLE software to simulate and optimize parameters of the beam. Output file was converted to ASTRA format and most beam dynamic simulations in multi-cell normal conducting cavity and cryomodule were performed by using ASTRA software. For cross-checking we compare results of MICHELLE and AS-TRA in first few cells. At the end of injector beam reach ~250keV energy which allow to trap bunch in acceleration regime without losses in TESLA like 1.3 GHz cavity. Short solenoid at the end of injector allow to regulate transverse beam size in cryomodule to match beam to extraction system and also reduce charge losses in accelerator.

43 PARTICLE ACCELERATORS↗

Calibration of cohesive parameters for fracture test simulations of sub-sized bend specimens of AM steels

In this work, crack extensions in sub-sized side-grooved bend specimens of AM steels are examined with changing cohesive parameters. Two-dimensional FE analyses are first conducted to simulate crack extensions by nodal release. The simulation results indicate the near-tip maximum opening stress and separation work rate increase and then slightly decrease for the bend specimens. The hydrogen-charged bend specimens have lower near-tip maximum opening stresses and average separation work rates than those of the uncharged bend specimens. The changing near-tip maximum opening stresses and the separation work rates with increasing crack extension are determined as references for the changing cohesive strengths and energies, respectively. Two-dimensional FE analyses with different changing cohesive parameters are then performed. The simulation results with calibrated cohesive parameters can match well with the test results. The hydrogen-charged specimens have the lower changing cohesive strength vs crack growth curves compared with those of the uncharged specimens. The hydrogen-charged specimens have either lower or similar changing cohesive energy vs crack growth curves compared with those of the uncharged specimens. Finally, a three-dimensional FE analysis is conducted to simulate crack extension by nodal release in one bend specimen to examine the stress triaxialities in front of the growing crack fronts at different locations from the center plane to the planes near the side groove front with increasing crack extension to identify possible physical reasons for the changing cohesive parameters.

36 MATERIALS SCIENCE↗

Charge Density Mismatch is a Key Characteristic of Highly Concentrated Electrolyte Solutions and Highly Water‐Soluble Salts

Only very soluble electrolytes can form concentrated solutions. Some salts are so soluble that there are less than four water molecules per ion in saturated solution. Ions usually form clusters or networks with more than one counterion in their coordination sphere in these concentrated solutions. Do these ultraconcentrated solutions form because the counterions have high affinity for each other in liquid, or because they have a poor affinity for each other in solids? Here, in this study, this question is addressed using the valence matching principle of the bond valence model by comparing the charge density mismatch between counterions to their solubility for a series of alkali fluorides, carboxylates, and oxyanions. The solubilities are plotted against the characteristic average bond valence of the alkali, and the lowest solubilities are those where alkali and anion had matching bond valences. Conversely, the highest solubilities are those with poorly matching bond valences. Available ion-pairing constants indicate that the weakest ion-pairs are those with the largest bond valence mismatch, indicating that the large water solubilities occur despite weak ion-pairing rather than because of strong ion-pairing. Therefore, a key characteristic of highly water-soluble salts is that the counterions have mismatched charge densities.

concentrated solutions↗

Role of Pb/PbSO 4 Morphologies in Dynamic Charge Acceptance of Lead Acid Batteries

The dynamic charge acceptance (DCA) of negative pastes in lead acid batteries is studied using a continuum level model that is validated against in situ X-ray diffraction experiments. The model matches the current transient during a ten-minute, 2.4 V charge at 80% state of charge (SOC) using a distribution of PbSO 4 particles. <2% by volume of small, reactive particles is shown to provide ∼50% of the capacity during the first ten seconds. Increases in DCA with increasing carbon content are captured with increasing lead surface area. The increase in DCA when the 2.4 V charge is done after discharging to 80% SOC (vs charging to 80%) is captured by reducing the PbSO 4 particle sizes. It is hypothesized that the lower DCA after charging is caused by the absence of smaller particles that were consumed during the initial charge to 80% SOC, which is confirmed from X-ray measurements. Finally, two-particle case studies show that reducing the PbSO 4 particle size is more effective for increasing DCA than increasing the PbSO 4 dissolution rate alone. For a given lead surface area, the optimal DCA occurs when the particle sizes are large enough to avoid blocking the surface but small enough to provide dissolution/diffusion improvements.

Knehr, Kevin W. [Argonne National Laboratory (ANL)↗