Search NASA⌕ Search

SEARCH · Search NASA

Results for “Choline chloride”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

63 records · Page 4

Data for "Integrated Green Biorefinery for the Production of Anthocyanins, Fermentable Sugars, and High Pure Lignin from Miscanthus × giganteus "

Miscanthus x giganteus (Mxg) is a promising perennial crop for producing natural colorants, renewable fuels, and bioproducts. However, natural recalcitrance and high pretreatment cost are major barriers to their complete conversion. In this study, a green processing method has been investigated for efficient recovery of natural pigments (anthocyanins), fermentable sugars, and pure lignin from Mxg genotypes using choline chloride-based natural deep eutectic solvents (NADES) systems. Interestingly, choline chloride: lactic acid (ChCl: LA) NADES-processed biomass resulted in 67.8 ± 2.1 μg g−1 of anthocyanins from dry biomass. A maximum of 87.4%–94.1% glucose yield was achieved after enzymatic saccharification. The effective extraction of lignin with high purity with higher β-aryl ether (βO4) bonds from advanced crops is crucial for lignin valorization. Notably, highly pure lignin (≈93.4% ± 1.4%) is achieved after low-temperature NADES pretreatment while retaining lignin’s native structure. 31P nuclear magnetic resonance demonstrated that total phenolics for ChCl: LA-lignin resulted in 1.20 mmol g−1 hydroxyls. The relative monolignol composition of syringyl (S), guaiacyl (G), and p-hydroxyphenyl (H) is 19.0, 65.7, and 14.3%, respectively, as evidenced by heteronuclear single quantum coherence analysis. This study provides a novel approach for obtaining high-purity lignin for catalytic depolymerization for oligomers and bifunctional monoaromatics production and leverages current cellulosic biorefinery technologies.

biomass analytics↗

A green degumming approach for lignocellulosic kenaf bast using ethanolamine deep eutectic solvent

Traditional chemical degumming methods for lignocellulosic bast fibers pose substantial challenges, especially when dealing with kenaf bast, which has a high lignin content. Here, these challenges include severe pollution and low efficiency, etc. Therefore, this study developed a novel, green, and efficient degumming approach for lignocellulosic kenaf bast, leveraging choline chloride-ethanolamine (ChCl-ETA) alkaline deep eutectic solvent (DES). The efficacy of the ChCl-ETA DES based degumming method was validated through comprehensive chemical composition analysis, scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TG), and two-dimensional (2D) nuclear magnetic resonance (NMR) spectroscopy. Subsequently, the optimal degumming conditions, with a choline chloride to ethanolamine ratio of 1:6 and a degumming temperature of 120 °C, were determined based on the results of the residual gum content. Significantly, the recycled ChCl-ETA DES mixtures could maintain a degumming capacity (revealed by the residual gum content of degummed fibers) comparable to that of the conventional double-boiling method for at least five degumming cycles without purification. Given its low-pollution process and high efficiency, this developed method holds great potential for industrial-scale applications of lignocellulosic bast fibers.

Choline chloride↗

Ion transport in non-aqueous electrolyte mixtures of zinc chloride deep eutectic solvent (DES) and molecular solvents

For this work, the ion dynamics of null solvents 1ZnCl 2 :4EtG and 1ChCl:1ZnCl 2 :6EtG incorporating 1M water, propylene carbonate (PC) or acetonitrile (AcN) were investigated using 1 H NMR spectra and spin-lattice relaxation time (T 1 ) measurements combined with ionic conductivity, density, and viscosity, all as a function of temperature. Results show that the inclusion of all co-solvents increased the available free volume of the mixtures and followed the trend H 2 O ≤ PC < AcN. 1 H NMR spectra and T 1 inferred the presence of multiple ionic species with varying rates of mobilities. These dynamic heterogeneities were displayed by the broad T 1 minima – especially for the 1ZnCl 2 :4EtG mixtures – and asymmetrically broadened linewidths. T 1 results also revealed selective interaction sites between the hydrogen bond donors and acceptors, as well as with the co-solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel catalytic method for low-energy CO2 capture

High-energy associated with slow absorption-desorption kinetics remains a major challenge of all chemisorption-based CO2 capture technologies, particularly during solvent regeneration. A novel catalytic sorption system, based on aqueous piperidine (C5H10-NH) activated by a deep eutectic solvent (DES), was developed in this research to overcome the challenge.

CO2 capture↗

Experimental investigation of flow distribution in enhanced geothermal systems with deep eutectic solvent

Geothermal energy has been recognized as a valuable alternative to fossil fuels and nuclear power, as it is renewable and reliable. Enhanced Geothermal Systems (EGSs) have the potential to expand geothermal energy production by enabling access to previously untapped geothermal resources. Geothermal short-circuiting poses a significant challenge to EGS development, leading to reduced heat extraction. Deep Eutectic Solvent (DES) exhibits favorable thermal and rheological properties, making it a candidate for geothermal applications. Here, this paper examines Choline Chloride-Based Deep Eutectic Solvent (DES) as a working fluid in geothermal applications and its potential to mitigate geothermal short-circuiting. Hydraulic experiments using a dual fracture flow loop were conducted at high temperatures. The results showed that DES exhibited higher differential pressure behavior compared to water. Flow distribution results revealed that DES enhances flow allocation within the small fracture, particularly when a temperature difference exists between fractures. Specifically, DES increased flow distribution by an average of 11% when the temperature difference was 85°C, and by 13% when the difference was 45°C, relative to water. These findings suggest that DES responds to thermal fracture differences, making it a potential remedy to address geothermal short-circuiting.

15 GEOTHERMAL ENERGY↗

Combining High-Throughput Experiments and Active Learning to Characterize Deep Eutectic Solvents

The high tunability of deep eutectic solvents (DESs) stems from the ease of changing their precursors and relative compositions. However, measuring the physicochemical properties across large composition and temperature ranges, necessary to properly design target-specific DESs, is tedious and error-prone and represents a bottleneck in the advancement and scalability of DES-based applications. As such, active learning (AL) methodologies based on Gaussian processes (GPs) were developed in this work to minimize the experimental effort necessary to characterize DESs. Owing to its importance for large-scale applications, the reduction of DES viscosity through the addition of a low-molecular-weight solvent was explored as a case study. A high-throughput experimental screening was initially performed on nine different ternary DESs. Then, GPs were successfully trained to predict DES viscosity from its composition and temperature, showcasing the ability of these stochastic, nonparametric models to accurately describe the physicochemical properties of complex mixtures. Finally, the ability of GPs to provide estimates of their own uncertainty was leveraged through an AL framework to minimize the number of data points necessary to obtain accurate viscosity modes. This led to a significant reduction in data requirements, with many systems requiring only five independent viscosity data points to be properly described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anion Effects on the Interfacial Structure and Bulk Physical Properties in Choline-Based Hydrogen-Bonded Electrolytes

Electrolytes consisting of choline (Ch) salts with acetate (Ac) and oxalate (Ox) anions were studied in mixtures with ethylene glycol (EG), in comparison to chloride (Cl)- and bis(trifluorosulfonyl)imide (TFSI)-containing systems to understand the impact of anion size and charge density on the bulk electrolyte and interfacial properties. These represent hydrogen-bonded concentrated electrolytes where the Ch salts are the H-bond acceptors (HBAs) and EG is the H-bond donor (HBD) in 1:2 and 1:4 HBA:HBD ratios. Increased H-bonding in Ch 2 Ox with EG compacts the liquid compared to ChAc, consistent with the increased dissociation energies of the HBA:HBD clusters with Ox –2 calculated by density functional theory (DFT), thus leading to denser and more viscous liquids. Electrochemical impedance spectroscopy (EIS) and surface-enhanced Raman spectroscopy (SERS) were used to investigate interfacial charge density and the electrode surface species. Differential capacitance curves demonstrate weak dependence on potential except for ChAc:EG, where Ac – is found to adsorb on the Au surface, in particular at +0.055 V vs Ag quasi-reference while no specific adsorption was observed on glassy carbon (GC). In situ SERS measurement confirms the formation of a surface layer in the ChAc:EG systems resulting from a Au–acetate interaction. Despite the structural similarities, Ox –2 did not show specific binding or any dependence of capacitance on potential as a result of strongly solvating EG molecules via H-bonds. Furthermore, this study shows that the charge density of the HBAs impacts both bulk properties and the electrical double-layer formation in concentrated H-bonded electrolytes that is relevant to electrochemical kinetics and morphology in electrodeposition processes and energy storage applications.

25 ENERGY STORAGE↗