Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cloud Service Providers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Testing and validating SMDS algorithms implemented in the cloud

Pacific Northwest National Laboratory (PNNL) provided technical assistance to NorthWrite Inc. under the Small Business Vouchers (SBV) Pilot. NorthWrite delivered services to owners of small commercial buildings, using a cloud-based service to monitor, control, and optimize building operations, saving energy and reducing operating costs for the owners while ensuring that occupant comfort needs were consistently met. NorthWrite had a longstanding desire to add a new suite of diagnostic capabilities to their service offering and had been trying, without success, to incorporate several diagnostic algorithms published by PNNL. These algorithms arise from research previously supported by BTO. Through the SBV awarded to NorthWrite, PNNL made available technical knowledge regarding the derivation and application of the following sets of algorithms for use in the NorthWrite Cloud-based service delivery system: • algorithms for monitoring rooftop packaged air conditioners and heat pumps (often referred to as rooftop units or RTUs) and diagnosing faults in these units, • advanced algorithms for automated fault detection and diagnosis of other equipment found in small buildings, and • algorithms for identifying, prioritizing, and assessing the economic effectiveness of implementing energy saving measures in small commercial buildings based on sensed data. The PNNL researchers involved were the original developers of these algorithms, had a unique understanding of the derivation of the algorithms, and had the source data used for this derivation. Further, the PNNL researchers had extensive experience using these algorithms in the laboratory, unique experience applying these algorithms in real-world small commercial buildings and could solve a number of key problems that NorthWrite and other users faced in using these algorithms at scale. In addition, PNNL had recently installed a pair of RTUs in a laboratory setting that were instrumented and connected with data acquisition systems that provided a unique test rig for validating the algorithms before NorthWrite began to deploy their new services in the field.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRSDate not supplied

Developing a Cloud-Based ArcGIS Image Service for TROPOMI Level 2 Data: Preprocessing, Transformation, and Publication

TROPOMI, the Tropospheric Monitoring Instrument aboard the Sentinel-5 Precursor satellite, provides high spatiotemporal resolution atmospheric measurements. It is essential for monitoring air quality, greenhouse gases, and other trace gases. Integrating TROPOMI Level 2 data into an ArcGIS Image Service marks a significant advancement in the accessibility and utility of satellite-derived environmental information for GIS applications. This paper details the methodology for building an ArcGIS Image Service tailored to handle TROPOMI Level 2 data, with a focus on preprocessing, transformation, and cloud-based publication. The workflow utilizes Python and ArcPy for data reformatting, reprojection, and updating, ensuring efficient processing and cloud-based notifications. By establishing a robust pipeline, the ArcGIS Image Service provides real-time access to TROPOMI Level 2 data, enabling users to visualize, analyze, and interpret atmospheric phenomena effectively.

Level 2 Data, ArcGIS, Image Service, ArcPy, OGC↗
NASA NTRS2000

Channel Selection for the Advanced Baseline Imager (ABI)

The GOES-R (Geostationary Operational Environmental Satellite-R) Imager will be the fourth generation imaging radiometer flown in 40 years that observes the western hemisphere from geosynchronous orbit. The Imager is an international resource for information about unpredictable short-term mesoscale phenomena such as severe storms, precipitation, clouds and fog, fires and volcanoes. As such, it must provide: (1) continuity of service, (2) valuable new capabilities, and (3) synergy with the companion fleet of imaging radiometers. This combination of requirements lead to a suite of channels evolved from the generations of LEO (low Earth orbit) and GEO- (geosynchronous Earth orbit) and -sounders. To maximize the science and applications payoff from its unique viewpoint, the next generation GOES Imager should concentrate upon regional measurements of the chaotic atmospheric phenomena involving water and the diurnal cycle -- energy potential, moisture transport, phase changes, precipitation, and cloud climatology.

Chesters, Dennis↗
DOE OSTI2024

Continuous thermostat setpoint monitoring and correction (Thermostat setpoint correction) v1.0

The Continuous Thermostat Setpoint Monitoring and Correction software is a set of fault detection and correction algorithms that can be implemented in thermostats with two-way OpenAPIs. It is written in the Python language. The algorithms aim to detect the most common and impactful efficiency problems associated with thermostat setpoints - overly aggressive heating or cooling setpoints, incorrect schedules/setbacks, and overly narrow deadbands. These algorithms can automatically detect faults, and implement associated corrective actions to bring the system back to a state of efficient operation. The algorithms can run remotely in the cloud, and directly implemented by connected thermostat manufacturers, or by third party service providers. The software enables a lightweight cost-effective energy management strategy for HVAC systems. The solution is specially viable for small and medium sized commercial buildings, where a full scale building automation system and fault detection and diagnostic tools are often unavailable.

Granderson, Jessica↗
NASA NTRSDate not supplied

NASA POWER: Providing Present and Future Climate Services Based on NASA Data for the Energy, Agricultural, and Sustainable Buildings Communities

NASA’s Prediction of Worldwide Energy Resource (POWER) project facilitates the use of NASA Earth Science data holdings within the renewable energy, agricultural, and building heating/cooling design industries. POWER packages solar and meteorological data at various temporal levels from several NASA projects in a user friendly GIS-enabled web services system (https://power.larc.nasa.gov). Data users can access these data either through an intuitive data viewer, image services fully integrable with GIS analysis, connections in the cloud through an Amazon Web Services S3 Bucket, or fully customizable access through an API. Data provided by POWER has been successfully used by decision makers to support actions that address climate change. For example, POWER data has been used to remotely monitor solar array fields and integrated in a sizing tool for off-grid solar and storage systems. POWER data has also been coupled with key building decision tools to support design and retrofitting of building energy systems for energy efficiency and reduction of greenhouse gases. POWER is now developing climate services to provide time series of the projected future evolution of key quantities that interest our users, such as heating/cooling degree days, temperature, wind speed, and downwelling solar flux. We demonstrate the potential of the new climate services by presenting here a range of possible future changes in these quantities at different NASA centers across the continental United States. These data services are based on downscaled climate model data from the NASA Earth Exchange Global Daily Downscaled Projections (NEX-GDDP) data set. We highlight the important insights that new climate services can provide. Our climate services will help our user communities quantify the impacts of climate change to support their key decisions in planning for the future, both inside and outside the Federal Government, especially for decisions in renewable energy and in building heating and cooling.

Bradley Hegyi↗
DOE OSTI2024

Electronic structure simulations in the cloud computing environment

The transformative impact of modern computational paradigms and technologies, such as high-performance computing, quantum computing, and cloud computing, has opened up profound new opportunities for scientific simulations. Scalable computational chemistry is one beneficiary of this technological progress. The main focus of this paper is on the performance of various quantum chemical formulations, ranging from low-order methods to high-accuracy approaches, implemented in different computational chemistry packages, such as NWChem, NWChemEx, SPEC, ExaChem, and FLOSIC codes on the Azure Quantum Element (AQE) Microsoft cloud services. We pay particular attention to the intricate workflows for performing composite chemistry simulations, associated data curation, and mechanisms for accuracy assessment, as defined by the enabling cloud Computational Chemistry as a Service (CCaaS). Our focus also extends to Arrows' automated workflow for high throughput simulations. Finally, we provide a perspective on the role of cloud computing in supporting the mission of leadership computational facilities (LCFs).

computational chemistry, electronic structure, Clo↗
NASA NTRS2019

Harmony: Bringing Data Together by Bringing Services Together

As Earth observation data volume, velocity, and variety continues to accelerate, so do the challenges of working with those data. The computation, storage, and network transfer requirements for multi-petabyte datasets demand solutions that allow users to process, store, and move fewer bytes while still finding the valuable insights they seek. Our cloud-based data transformation framework, Harmony, tackles these challenges by providing consistent, standards-based interface to multiple disparate backend processors collocated with NASA EOSDIS data. It allows data scientists to perform data processing and harmonization activities across many datasets through familiar tooling. Simultaneously, it provides a clear, consistent interface for data providers to expose new or customized backend services for their data. This talk will discuss Harmony, its architecture and interface, and the path forward for cloud-based NASA EOSDIS data harmonization services.

Quinn, Patrick↗
DOE OSTI2024

Utilizing Distributed Heterogeneous Computing with PanDA in ATLAS

In recent years, advanced and complex analysis workflows have gained increasing importance in the ATLAS experiment at CERN, one of the large scientific experiments at LHC. Support for such workflows has allowed users to exploit remote computing resources and service providers distributed worldwide, overcoming limitations on local resources and services. The spectrum of computing options keeps increasing across the Worldwide LHC Computing Grid (WLCG), volunteer computing, high-performance computing, commercial clouds, and emerging service levels like Platform-as-a-Service (PaaS), Container-as-a-Service (CaaS) and Function-as-a-Service (FaaS), each one providing new advantages and constraints. Users can significantly benefit from these providers, but at the same time, it is cumbersome to deal with multiple providers, even in a single analysis workflow with fine-grained requirements coming from their applications’ nature and characteristics. In this paper, we will first highlight issues in geographically-distributed heterogeneous computing, such as the insulation of users from the complexities of dealing with remote providers, smart workload routing, complex resource provisioning, seamless execution of advanced workflows, workflow description, pseudointeractive analysis, and integration of PaaS, CaaS, and FaaS providers. We will also outline solutions developed in ATLAS with the Production and Distributed Analysis (PanDA) system and future challenges for LHC Run4.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2014

Proto-Examples of Data Access and Visualization Components of a Potential Cloud-Based GEOSS-AI System

Once a research or application problem has been identified, one logical next step is to search for available relevant data products. Thus, an early component of a potential GEOSS-AI system, in the continuum between observations and end point research, applications, and decision making, would be one that enables transparent data discovery and access by users. Such a component might be effected via the systems data agents. Presumably, some kind of data cataloging has already been implemented, e.g., in the GEOSS Common Infrastructure (GCI). Both the agents and cataloging could also leverage existing resources external to the system. The system would have some means to accept and integrate user-contributed agents. The need or desirability for some data format internal to the system should be evaluated. Another early component would be one that facilitates browsing visualization of the data, as well as some basic analyses.Three ongoing projects at the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) provide possible proto-examples of potential data access and visualization components of a cloud-based GEOSS-AI system. 1. Reorganizing data archived as time-step arrays to point-time series (data rods), as well as leveraging the NASA Simple Subset Wizard (SSW), to significantly increase the number of data products available, at multiple NASA data centers, for production as on-the-fly (virtual) data rods. SSWs data discovery is based on OpenSearch. Both pre-generated and virtual data rods are accessible via Web services. 2. Developing Web Feature Services to publish the metadata, and expose the locations, of pre-generated and virtual data rods in the GEOSS Portal and enable direct access of the data via Web services. SSW is also leveraged to increase the availability of both NASA and non-NASA data.3.Federating NASA Giovanni (Geospatial Interactive Online Visualization and Analysis Interface), for multi-sensor data exploration, that would allow each cooperating data center, currently the NASA Distributed Active Archive Centers (DAACs), to configure its own Giovanni deployment, while also allowing all the deployments to incorporate each others data. A federated Giovanni comprises Giovanni Virtual Machines, which can be run on local servers or in the cloud.

access↗
NASA NTRSDate not supplied

An Assessment of and Access to NASA CERES Hourly Solar Irradiance Data Products Using POWER Web Services

The National Aeronautics and Space Administration’s (NASA) Clouds and Earth’s Radiant Energy System (CERES) Mission has been providing surface solar irradiance data products since March 2000. With an emphasis on global climate quality data products, CERES produces a suite of data parameters related to both the inputs and the observed and measured solar irradiance components at the top-of-atmosphere and at the surface. This paper discusses the global CERES SYN1Deg (Synoptic 1x1 degree resolution) solar irradiance data products, shows that the accuracy of the global horizontal irradiance (GHI) at the hourly time scale is <1% for bias and 24% RMS compared to the Baseline Surface Radiation Network (BSRN) measurements. This paper then shows the accuracy of the direct and diffuse components and a proposed “bias” correction based upon the solar zenith angle dependence that provides accuracy useful for solar applications on a global basis for all sunlit conditions. Lastly, a brief description of how to obtain these hourly solar irradiance products based upon SYN1Deg using the NASA’s Prediction of Worldwide Energy Resource (POWER) web services portal is given so users can utilize these estimates for testing and evaluation.

Surface solar irradiance↗
NASA NTRS2000

Delta 2 Explosion Plume Analysis Report

A Delta II rocket exploded seconds after liftoff from Cape Canaveral Air Force Station (CCAFS) on 17 January 1997. The cloud produced by the explosion provided an opportunity to evaluate the models which are used to track potentially toxic dispersing plumes and clouds at CCAFS. The primary goal of this project was to conduct a case study of the dispersing cloud and the models used to predict the dispersion resulting from the explosion. The case study was conducted by comparing mesoscale and dispersion model results with available meteorological and plume observations. This study was funded by KSC under Applied Meteorology Unit (AMU) option hours. The models used in the study are part of the Eastern Range Dispersion Assessment System (ERDAS) and include the Regional Atmospheric Modeling System (RAMS), HYbrid Particle And Concentration Transport (HYPACT), and Rocket Exhaust Effluent Dispersion Model (REEDM). The primary observations used for explosion cloud verification of the study were from the National Weather Service's Weather Surveillance Radar 1988-Doppler (WSR-88D). Radar reflectivity measurements of the resulting cloud provided good estimates of the location and dimensions of the cloud over a four-hour period after the explosion. The results indicated that RAMS and HYPACT models performed reasonably well. Future upgrades to ERDAS are recommended.

Evans, Randolph J.↗
NASA NTRS2018

Air Quality Satellite Monitoring by TROPOMI on Sentinel-5P

The recently launched Sentinel satellite mission, the Sentinel-5 Precursor (Sentinel-5P), is one of the European Space Agency's (ESA) new mission family – Sentinels. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), a nadir-viewing 108⁰ field-of-view push-broom grating hyperspectral spectrometer, covering the wavelengths of ultraviolet-visible (270 nm - 495 nm), near infrared (675 nm - 775 nm), and shortwave infrared (2305 nm - 2385 nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels, and is providing measurements of atmospheric chemistry, aerosols, and clouds at high spatial, temporal, and spectral resolution. The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) supports over a thousand data collections in the focus areas of Atmospheric Composition, Water & Energy Cycles, and Climate Variability. Sentinel-5P TROPOMI Level-1B (L1B) and Level-2 (L2) products are curated at the GES DISC. Sentinel-5P data are provided by the European Union and the European Space Agency (ESA) through an agreement between ESA and NASA. Through its convenient and enhanced tools/services, such as OPeNDAP and L2 Subsetting, GES DISC offers the air quality remote sensing user community facile solutions for using complex Earth science data and applications. This presentation will demonstrate up-to-date TROPOMI products including EarthView (EV) radiance, solar irradiance, Aerosol Index, Carbon Monoxide, Total column Ozone, Nitrogen Dioxide, and cloud, as well as easy ways to access, visualize and subset TROPOMI data.

TROPOMI↗
NASA NTRSDate not supplied

Atmospheric Infrared Sounder Version 7 Near-Real-Time Product and Imagery Released by NASA GES DISC

The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) has been the home of data processing, archive, and distribution services for data from the Atmospheric Infrared Sounder (AIRS) mission since its launch in 2002. The GES DISC provides service to both AIRS routine and Near Real-Time (NRT) products. The AIRS NRT products are an important element in the Land, Atmosphere Near real-time Capability for EOS (LANCE). In collaboration with AIRS Project, the GES DISC has just released products from the Version 7 algorithm. The new version algorithm provides significant improvements over the previous version. The most substantial advances are: improved consistency between day and night water vapor; improved total column ozone and temperature; improved infrared-only (IR-only) retrievals, especially in high latitude regions; an improved Stochastic Cloud Clearing Neural Network used as a first guess at the initial value in the iterative retrieval process; and removal of ambiguity in surface classification in the IR-only retrieval algorithm. In addition, the GES DISC produces AIRS NRT imagery. The AIRS NRT imagery are generated by mosaicking and mapping the available AIRS 6-minute retrieval granules to a global projection. The images are constantly refreshed when new granules are produced. The AIRS NRT Viewer and LANCE Worldview provide visualization services to online users for AIRS NRT imagery. The data products used to generate this imagery include atmospheric temperature, humidity, precipitation, cloud, Dust Score, CO, and SO2. In this presentation, we will demonstrate visualization of the AIRS NRT imagery from the new Version 7, and demonstrate some improvements over the previous version. Progress on improving the AIRS NRT imagery, a collaboration project with the AIRS Applications Development Team at NASA Jet Propulsion Laboratory (JPL), will also be presented.

Feng Ding↗
NASA NTRS2021

Space-Borne Cloud-Native Satellite-Derived Bathymetry (SDB) Models Using ICESat-2 And Sentinel-2

Shallow nearshore coastal waters provide a wealth of societal, economic and ecosystem services, yet their topographic structure is poorly mapped due to a reliance upon expensive and time intensive methods. Space‐borne bathymetric mapping has helped address these issues, but has remained largely dependent upon in situ measurements. Here we fuse ICESat‐2 lidar data with Sentinel‐2 optical imagery, within the Google Earth Engine cloud platform, to create openly available spatially continuous high‐resolution bathymetric maps at regional‐to‐national scales in Florida, Crete and Bermuda. ICESat‐2 bathymetric classified photons are used to train three Satellite Derived Bathymetry (SDB) methods, including Lyzenga, Stumpf and Support Vector Regression algorithms. For each study site the Lyzenga algorithm yielded the lowest RMSE (approx. 10‐15%) when compared with validation data. We demonstrate a means of using ICESat‐2 for both model calibration and validation, thus cementing a pathway for fully space‐borne estimates of nearshore bathymetry in shallow, clear water environments.

N. Thomas↗
NASA NTRSDate not supplied

Changes in Characteristics of Future Climate Across the U.S.: Time Series Analysis of Climate Model Data by NASA POWER

NASA’s Prediction of Worldwide Energy Resource (POWER) project facilitates the use of NASA Earth Science data holdings within the energy, agricultural, and building heating/cooling design industries. POWER packages solar and meteorological data at various temporal levels from several NASA projects in a user friendly GIS-enabled web services system (https://power.larc.nasa.gov). Data users can access these data either through an intuitive data viewer, image services fully integrable with GIS analysis, connections in the cloud through an Amazon Web Services S3 Bucket, or fully customizable access through an API. Data provided by POWER has been used to remotely monitor solar array fields and integrated in a sizing tool for off-grid solar and storage systems. POWER data has also been coupled with key building decision tools to support design and retrofitting of building energy systems for energy efficiency and reduction of greenhouse gases. POWER is now developing capabilities to provide time series of the projected future evolution of surface quantities important to future energy production and use, such as heating/cooling degree days, temperature, wind speed, and downwelling solar flux. We present here a range of possible future changes in these quantities at locations throughout the continental United States. We show how both average and extreme values of the quantities will evolve from present-day to future climate conditions. We plan to provide these projections for users in the energy and sustainable energy communities.

Bradley M. Hegyi↗
NASA NTRS2018

Science Service Status 2019 World Radiocommunication Conference

Science missions such as Earth-exploration and remote sensing thatuse frequencies allocated for Earth Exploration-Satellite Service(EESS) provide valuable information about, for example: (1) Air quality monitoring (2) Soil moisture mapping (3) Sensing sea salinity (4) Weather forecasting and climate models (winds, storms, clouds).Another set of science missions use Space Research Service (SRS)allocations. These space research missions can support: (1) On orbit research that for example can help in the creation of new drugsor the impact of the space environment on satellites (2) Scientific information about the universe – stars, planetary science, solarsystem, and the future evolution of the universe.

Roura, Corali↗
NASA NTRS2012

Lost in Cloud

Cloud computing can reduce cost significantly because businesses can share computing resources. In recent years Small and Medium Businesses (SMB) have used Cloud effectively for cost saving and for sharing IT expenses. With the success of SMBs, many perceive that the larger enterprises ought to move into Cloud environment as well. Government agency s stove-piped environments are being considered as candidates for potential use of Cloud either as an enterprise entity or pockets of small communities. Cloud Computing is the delivery of computing as a service rather than as a product, whereby shared resources, software, and information are provided to computers and other devices as a utility over a network. Underneath the offered services, there exists a modern infrastructure cost of which is often spread across its services or its investors. As NASA is considered as an Enterprise class organization, like other enterprises, a shift has been occurring in perceiving its IT services as candidates for Cloud services. This paper discusses market trends in cloud computing from an enterprise angle and then addresses the topic of Cloud Computing for NASA in two possible forms. First, in the form of a public Cloud to support it as an enterprise, as well as to share it with the commercial and public at large. Second, as a private Cloud wherein the infrastructure is operated solely for NASA, whether managed internally or by a third-party and hosted internally or externally. The paper addresses the strengths and weaknesses of both paradigms of public and private Clouds, in both internally and externally operated settings. The content of the paper is from a NASA perspective but is applicable to any large enterprise with thousands of employees and contractors.

Maluf, David A.↗
DOE OSTI2020

An Edge-Cloud Integrated Solution for Buildings Demand Response Using Reinforcement Learning

Buildings, as major energy consumers, can provide great untapped demand response (DR) resources for grid services. However, their participation remains low in real-life. One major impediment for popularizing DR in buildings is the lack of cost-effective automation systems that can be widely adopted. Existing optimization-based smart building control algorithms suffer from high costs on both building-specific modeling and on-demand computing resources. To tackle these issues, this paper proposes a cost-effective edge-cloud integrated solution using reinforcement learning (RL). Beside RL’s ability to solve sequential optimal decision-making problems, its adaptability to easy-to-obtain building models and the off-line learning feature are likely to reduce the controller’s implementation cost. Using a surrogate building model learned automatically from building operation data, an RL agent learns an optimal control policy on cloud infrastructure, and the policy is then distributed to edge devices for execution. Simulation results demonstrate the control efficacy and the learning efficiency in buildings of different sizes. A preliminary cost analysis on a 4-zone commercial building shows the annual cost for optimal policy training is only 2.25% of the DR incentive received. Results of this study show a possible approach with higher return on investment for buildings to participate in DR programs.

24 POWER TRANSMISSION AND DISTRIBUTION↗