Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cloud shadow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Observations of Three-Dimensional Radiative Effects that Influence Satellite Retrievals of Cloud Properties

This paper examines three-dimensional (3D) radiative effects, which arise from horizontal radiative interactions between areas that have different cloud properties. Earlier studies have argued that these effects can cause significant uncertainties in current satellite retrievals of cloud properties, because the retrievals rely on one-dimensional (1D) theory and do not consider the effects of horizontal changes in cloud properties. This study addresses two questions: which retrieved cloud properties are influenced by 3D radiative effects, and where 3D effects tend to occur? The influence of 3D effects is detected from the wayside illumination and shadowing make clouds appear asymmetric: Areas appear brighter if the cloud top surface is tilted toward, rather than away from, the Sun. The analysis of 30 images by the Moderate Resolution Imaging Spectroradiometer (MODIS) reveals that retrievals of cloud optical thickness and cloud water content are most influenced by 3D effects, whereas retrievals of cloud particle size are much less affected. The results also indicate that while 3D effects are strongest at cloud edges, cloud top variability in cloud interiors, even in overcast regions, also produces considerable 3D effects. Finally, significant 3D effects are found in a wide variety of situations, ranging from thin clouds to thick ones and from low clouds to high ones.

Varnai, Tamas↗
NASA NTRS1991

ROSAT detection of an X-ray shadow in the 1/4-keV diffuse background in the Draco nebula

The detection by the Roentgen satellite (ROSAT) X-ray telescope of a shadow in the 1/4-keV (C-band, 0.1 to 0.284 keV) cosmic diffuse background is reported. The location and morphology of the local minimum in X-rays are in clear agreement with a discrete H I cloud. The shadow is very deep with a minimum level at 50 percent of the surrounding emission; therefore, a minimum of 50 percent of the observed off-cloud flux must originate on the far side of the cloud. The analysis of H I velocity components links the cloud with the Draco nebula (distance of about 600 parsecs); it then follows that there is significant 1/4-keV X-ray emission at large distance (more than 400 parsecs) from the galactic plane along this line of sight. The extent of the distant emission region is uncertain, and if it indicates the existence of a hot galactic corona, it must be patchy in nature.

Snowden, S. L.↗
NASA NTRS1972

Evaluate the application of ERTS-A data for detecting and mapping snow cover

The author has identified the following significant results. Preliminary results of the analysis of a limited sample of ERTS-1 data from the western United States and the Arctic indicate that snow cover can be detected in the MSS-4 and MSS-5 bands by its high reflectance compared to that of the surrounding snow-free terrain. Snow can generally be distinguished from clouds because of well-defined boundaries as compared with the less distinct cloud edges, the lack of shadows characteristic of clouds, and pattern configurations that fit closely with higher elevations and terrain features. At higher latitudes where repetitive ERTS-1 coverage occurs snow can also be identified by the day-to-day continuity of the patterns. In the longer wavelengths, particularly the MSS-7 band, the contrast between snow and snow-free terrain is much lower, and, thus, snow is more difficult to detect. ERTS-1 data from the Canadian Arctic shows the seasonal increase in snow cover in several areas. In other ERTS-1 data, considerable detail is evident in glaciers located along the east and west coasts of Greenland.

Barnes, J. C.↗
NASA NTRS1992

Cumulus cloud base height estimation from high spatial resolution Landsat data - A Hough transform approach

A semiautomated methodology is developed for estimating cumulus cloud base heights on the basis of high spatial resolution Landsat MSS data, using various image-processing techniques to match cloud edges with their corresponding shadow edges. The cloud base height is then estimated by computing the separation distance between the corresponding generalized Hough transform reference points. The differences between the cloud base heights computed by these means and a manual verification technique are of the order of 100 m or less; accuracies of 50-70 m may soon be possible via EOS instruments.

Berendes, Todd↗
NASA NTRS1990

Automated cloud base height determination from high resolution Landsat data - A Hough transform approach

A direct method for determining the cloud base height derived from the displacement of the shadow from the cloud, and the solar azimuth and zenith angle is presented. Cumulus cloud scenes over land from Landsat MSS imagery are considered. The clouds are first matched with the corresponding shadows; the pixel distance of a reference point in the cloud is computed from the corresponding reference point in the shadow; and then the solar zenith angle is used to compute the cloud base height. Observations indicate that the cloud base height appears to be size-dependent with larger clouds generally associated with higher cloud bases and that clouds within the same size range and within the same scene region are approximately of the same height.

Sengupta, S. K.↗
NASA NTRS1971

Automatic Computer Mapping of Terrain

Computer processing of 17 wavelength bands of visible, reflective infrared, and thermal infrared scanner spectrometer data, and of three wavelength bands derived from color aerial film has resulted in successful automatic computer mapping of eight or more terrain classes in a Yellowstone National Park test site. The tests involved: (1) supervised and non-supervised computer programs; (2) special preprocessing of the scanner data to reduce computer processing time and cost, and improve the accuracy; and (3) studies of the effectiveness of the proposed Earth Resources Technology Satellite (ERTS) data channels in the automatic mapping of the same terrain, based on simulations, using the same set of scanner data. The following terrain classes have been mapped with greater than 80 percent accuracy in a 12-square-mile area with 1,800 feet of relief; (1) bedrock exposures, (2) vegetated rock rubble, (3) talus, (4) glacial kame meadow, (5) glacial till meadow, (6) forest, (7) bog, and (8) water. In addition, shadows of clouds and cliffs are depicted, but were greatly reduced by using preprocessing techniques.

Smedes, H. W.↗
NASA NTRS1973

Preparation of urban land use inventories by machine-processing of ERTS MSS data

Spectral classes of urban phenomena identified from ERTS multispectral scanner data in Milwaukee included Surburban, Inner City, Industry, Grassy (open area), Road, Wooded Suburb, Water, Cloud, and Shadow. The Milwaukee spectral class statistics were used to classify the Chicago area, within the same ERTS frame, and similar results were achieved. In another ERTS frame, Marion County (Indianapolis) data were classified into similar classes. The Marion County ERTS study was supported by a land use classification of an area near downtown Indianapolis that utilized 12-band MSS data collected by aircraft from 3000 feet. The results of the ERTS analyses suggest that satellite data will be a useful tool for the urban planner for monitoring urban land use.

Todd, W.↗
NASA NTRS1973

Evaluate ERTS imagery for mapping and detection of changes of snowcover on land and on glaciers

The author has identified the following significant results. A possibly more accurate method to determine snowcover area change has been tried; snowcover area change over periods of an ERTS-1 cycle are very useful in determining energy balances over regional areas and to determine snow depth as a function of altitude. Also since shadow and cloud cover areas are highlighted this method may be a step toward more complete machine processing.

Meier, M. F.↗
NASA NTRS1973

Preparation of urban land use inventories by machine processing of ERTS MSS data

Spectral classes of urban phenomena identified from Earth Resources Technology Satellite (ERTS) multispectral scanner data in Milwaukee included suburban inner city, industry, grassy (open area), road, wooded suburb, water cloud, and shadow. The Milwaukee spectral class statistics were used to classify the Chicago area, within the same ERTS frame, and similar results were achieved. In another ERTS frame, Marion County (Indianapolis) data were classified into similar classes. The Marion County ERTS study was supported by a land use classification of an area near downtown Indianapolis that utilized 12-band MSS data collected by aircraft from 3000 feet. The results of the ERTS analyses suggest that satellite data will be a useful tool for the urban planner for monitoring urban land use.

Todd, W.↗
NASA NTRS1995

Discovery of a candidate old, isolated neutron star in the field of a galactic cirrus cloud

New x-ray optical, and radio observations of the bright, unidentified x-ray source MS 0317.7-6647 are presented suggesting that this source is a likely compact stellar remnant. As part of the Einstein Extended Medium Sensivity Survey, this source was discovered serendipitously in the Einstein Imaging Proportional Counter pointing towards the nearby (4.5 Mpc) spiral galaxy NGC 1313. The very high x-ray to optical flux ratio, pointlike ROSAT HRI detection, and extremely soft component in the x-ray spectrum of MS 0317.7-6647 eliminate all the usual classes of optical counterparts to faint x-ray sources except for a very massive x-ray binary (and black hole candidate) in NGC 1313, a nearby, companionless pulsar similar to Geminga, or a very nearby ( approximately 100 pc) isolated, old neutron star slowly accreting interstellar matter onto its magnetic poles. The presence of an IR cirrus cloud which shadows the approximately 0.25 keV x-ray background in this direction supports the latter possibilty.

Stocke, John T.↗
NASA NTRS2014

Enabling Future Low-Cost Small Spacecraft Mission Concepts Using Small Radioisotope Power Systems

For more than five decades, Radioisotope Power Systems (RPS) have played a critical role in the exploration of space, enabling missions of scientific discovery to destinations across the solar system by providing electrical power to explore remote and challenging environments - some of the hardest to reach, darkest, and coldest locations in the solar system. In particular, RPS has met the demand of many long-duration mission concepts for continuous power to conduct science investigations independent of change in sunlight or variations in surface conditions like shadows, thick clouds, or dust.

Lee, Young H.↗
NASA NTRS2017

Harmonized Landsat/Sentinel-2 Reflectance Products for Land Monitoring (Invited)

Many land applications require more frequent observations than can be obtained from a single 'Landsat class' sensor. Agricultural monitoring, inland water quality assessment, stand-scale phenology, and numerous other applications all require near-daily imagery at better than 1ha resolution. Thus the land science community has begun expressing a desire for a '30-meter MODIS' global monitoring capability. One cost-effective way to achieve this goal is via merging data from multiple, international observatories into a single virtual constellation. The Harmonized Landsat/Sentinel-2 (HLS) project has been working to generate a seamless surface reflectance product by combining observations from USGS/NASA Landsat-8 and ESA Sentinel-2. Harmonization in this context requires a series of radiometric and geometric transforms to create a single surface reflectance time series agnostic to sensor origin. Radiometric corrections include a common atmospheric correction using the Landsat-8 LaSRC/6S approach, a simple BRDF adjustment to constant solar and nadir view angle, and spectral bandpass adjustments to fit the Landsat-8 OLI reference. Data are then resampled to a consistent 30m UTM grid, using the Sentinel-2 global tile system. Cloud and shadow masking are also implemented. Quality assurance (QA) involves comparison of the output 30m HLS products with near-simultaneous MODIS nadir-adjusted observations. Prototoype HLS products have been processed for approximately 7% of the global land area using the NASA Earth Exchange (NEX) compute environment at NASA Ames, and can be downloaded from the HLS web site (https://hls.gsfc.nasa.gov). A wall-to-wall North America data set is being prepared for 2018. This talk will review the objectives and status of the HLS project, and illustrate applications of high-density optical time series data for agriculture and ecology. We also discuss lessons learned from HLS in the general context of implementing virtual constellations.

Reflectance↗
NASA NTRSDate not supplied

Development of the GeoNEX Level 2G Products: Exploiting the Diurnal Variability of TOA Reflectance in Atmospheric Correction

This study develops a new atmospheric correction algorithm to generate the Level 2G products, in particular the gap-filled Surface Reflectance at 10-minute time steps, for the Geostationary-NASA Earth Exchange (GeoNEX) project. The algorithm is based on the MODIS MAIAC (Multi-Angle Implementation of Atmospheric Correction) framework but with significant modifications to exploit angular/temporal information from the diurnal variability of the GeoNEX L1G TOA (Top-of-Atmosphere) reflectance. The algorithm starts by evaluating the roughness/smoothness of the diurnal time series of the TOA reflectance. Because rapid changes in TOA reflectance are generally caused by passing clouds or shadows, rough segments of the time series are automatically filtered out while the smooth segments are further tested for brightness and temperature to identify clear-sky and snow-free observations. Next the algorithm runs the MAIAC RTM (Radiative Transfer Model) to retrieve the Ross-Thick-Li-Sparse (RTLS) BRDF model parameters and the daily-mean atmospheric optical depth (AOD) that allow the RTM to optimally simulate the observed diurnal variability of clear-sky TOA reflectance. Once the initial RTLS parameters are retrieved after the algorithm’s burn-in period, they are used as the prior information to predict the AOD level for the next days, while the subsequent clear-sky observations are used to make necessary adjustments to the RTLS parameters in an continuous fashion. This “prediction-analysis” cycle is then iterated to process the full time series of the L1G data, skipping only total-cloudy days or when surface snow is detected. We tested the algorithm over a list of selected AERONET sites. The retrieved results (the daily mean AOD and the RTLS parameters) reasonably agree with the ground-based measurements. Importantly, the results indicate that the diurnal cycles of surface reflectance are continuous functions of the illumination-view geometry. Thus we can use the retrieved RTLS model to accurately fill in data gaps on partial cloudy days. Also, our algorithm is totally independent from the traditional approaches based on the use of spectral band ratios between the shortwave infrared (e.g., 2.2µm) and the visible (e.g., 0.47µm and 0.64µm) bands. Our results thus demonstrate that the high-frequent diurnal geostationary observations contain unique information that helps us improve atmospheric correction of remote sensing data.

GeoNEX↗
NASA NTRS1996

The effects of cloud inhomogeneities upon radiative fluxes, and the supply of a cloud truth validation dataset

The ASTER polar cloud mask algorithm is currently under development. Several classification techniques have been developed and implemented. The merits and accuracy of each are being examined. The classification techniques under investigation include fuzzy logic, hierarchical neural network, and a pairwise histogram comparison scheme based on sample histograms called the Paired Histogram Method. Scene adaptive methods also are being investigated as a means to improve classifier performance. The feature, arctan of Band 4 and Band 5, and the Band 2 vs. Band 4 feature space are key to separating frozen water (e.g., ice/snow, slush/wet ice, etc.) from cloud over frozen water, and land from cloud over land, respectively. A total of 82 Landsat TM circumpolar scenes are being used as a basis for algorithm development and testing. Numerous spectral features are being tested and include the 7 basic Landsat TM bands, in addition to ratios, differences, arctans, and normalized differences of each combination of bands. A technique for deriving cloud base and top height is developed. It uses 2-D cross correlation between a cloud edge and its corresponding shadow to determine the displacement of the cloud from its shadow. The height is then determined from this displacement, the solar zenith angle, and the sensor viewing angle.

Welch, Ronald M.↗
NASA NTRS2002

Remote Sensing of Cloud, Aerosol, and Land Properties from MODIS: Applications to the East Asia Region

MODIS is an earth-viewing cross-track scanning spectroradiometer launched on the Terra satellite in December 1999 and the Aqua satellite in May 2002. MODIS scans a swath width sufficient to provide nearly complete global coverage every two days from a polar-orbiting, sun-synchronous, platform at an altitude of 705 km, and provides images in 36 spectral bands between 0.415 and 14.235 microns with spatial resolutions of 250 m (2 bands), 500 m (5 bands) and 1000 m (29 bands). These bands have been carefully selected to enable advanced studies of land, ocean, and atmospheric processes. In this paper we will describe the various methods being used for the remote sensing of cloud, aerosol, and surface properties using MODIS data, focusing primarily on (i) the MODIS cloud mask used to distinguish clouds, clear sky, heavy aerosol, and shadows on the ground, (ii) cloud optical properties, especially cloud optical thickness and effective radius of water drops and ice crystals, (iii) aerosol optical thickness and size characteristics both over land and ocean, and (iv) ecosystem classification and surface spectral reflectance. The physical principles behind the determination of each of these products will be described, together with an example of their application using MODIS observations to the east Asian region. All products are archived into two categories: pixel-level retrievals (referred to as Level-2 products) and global gridded products at a latitude and longitude resolution of 1 min (Level-3 products).

King, Michael D.↗
NASA NTRS2021

Augmenting Landsat time series with Harmonized Landsat Sentinel-2 data products: Assessment of spectral correspondence

An increase in the temporal revisit of satellite data is often sought to increase the likelihood of obtaining cloud- and shadow-free observations as well as to improve mapping of rapidly- or seasonally-changing features. Currently, as a tandem, Landsat-7 Enhanced Thematic Mapper Plus (ETM+) and −8 Operational Land Imager (OLI) provide an acquisition opportunity on an 8-day revisit interval. Sentinel-2A and -2B MultiSpectral Instrument (MSI), with a wider swath, have a 5-day revisit interval at the equator. Due to robust pre- and post-launch cross-calibration, it has been possible for NASA to produce the Harmonized Landsat Sentinel-2 (HLS) data product from Landsat-8 OLI and Sentinel-2 MSI: L30 and S30, respectively. Knowledge of the agreement of HLS outputs (especially S30) with historic Landsat surface reflectance products will inform the ability to integrate historic time-series information with new and more frequent measures as delivered by HLS. In this research, we control for acquisition date and data source to cross-compare the HLS data (L30, S30) with established Landsat-8 OLI surface-reflectance measures as delivered by the USGS (hereafter BAP, Best Available Pixel). S30 and L30 were found to have high agreement (R = 0.87–0.96) for spectral channels and an r = 0.99 for Normalized Burn Ratio (NBR) with low relative root-mean-square difference values (1.7%–3.3%). Agreement between L30 and BAP was lower, with R values ranging from 0.85 to 0.92 for spectral channels and R = 0.94 for NBR. S30 and BAP had the lowest agreement, with R values ranging from 0.71 to 0.85 for spectral channels and r = 0.90 for NBR. Comparisons indicated a stronger agreement at latitudes above 55° N. Some dependency between spectral agreement and land cover was found, with stronger correspondence for non-vegetated cover types. The level of agreement between S30 and BAP reported herein would enable integration of HLS outputs with historic Landsat data. The resulting increased temporal frequency of data allows for improvements to current cloud screening practices and increases data density and the likelihood of temporal proximity to target date for pixel compositing approaches. Furthermore, additional within-year observations will enable change products with a higher temporal fidelity and allow for the incorporation of phenological trends into land cover classification algorithms.

Michael A. Wulder↗
NASA NTRS1973

Break-up characteristics of Chena River Basin

The author has identified the following significant results. While visually analyzing ERTS-1 data for August and September, 1972, it was found that lakes as small as 200 feet in diameter were visible on the imagery. An examination of the imagery for the Minto Lakes area shows that the lakes take on their darkest appearance in MSS band 6. The Tanana River which flows through this area appears quite light in band 5, quite dark in band 7, and is almost undetectable for band 6. The significance of these data are that potential surface storage could be measured for watersheds that have substantial numbers of lakes. This potential storage would be available to both spring runoff and summer precipitation. Caution must be shown because certain clouds cast a shadow that is similar to the lake appearance. The difference of the imagery for a lake and a river of the same band is due to the sediment load for the river. The Tanana River had a heavy glacial sediment load. The area of snow cover during the fall accumulation can be mapped in detail.

Carlson, R. F.↗
NASA NTRS1986

Radar glory from buried craters on icy moons

Three ice-covered moons of Jupiter, in comparison with rocky planets and earth's moon, produce radar echoes of astounding strengths and bizarre polarizations. Scattering from buried craters can explain these and other anomalous properties of the echoes. The role of such craters is analogous to that of the water droplets that create the apparition known as 'the glory', the optically bright region surrounding an observer's shadow on a cloud. Both situations involve the electromagnetic phenomenon of total internal reflection at a dielectric interface, operating in a geometry that strongly favors exact backscattering. Dim surface craters are transformed into bright glory holes by being buried under somewhat denser material, thereby increasing the intensity of their echoes by factors of hundreds. The dielectric interface thus formed at the crater walls nicely accounts for the unusual polarizations of the echoes.

Eshleman, Von R.↗