Search NASA⌕ Search

SEARCH · Search NASA

Results for “Comet Sample”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Application of Solar Electric Propulsion to a Comet Surface Sample Return Mission

Current NSTAR (planned for the Discovery Mission: Dawn) and NASA's Evolutionary Xenon Thruster based propulsion systems were compared for a comet surface sample return mission to Tempe1 1. Mission and systems analyses were conducted over a range of array power for each propulsion system with an array of 12 kW EOL at 1 AU chosen for a baseline. Engine configurations investigated for NSTAR included 4 operational engines with 1 spare and 5 operational engines with 1 spare. The NEXT configuration investigated included 2 operational engines plus 1 spare, with performance estimated for high thrust and high Isp throttling modes. Figures of merit for this comparison include Solar Electric Propulsion dry mass, average engine throughput, and net non-propulsion payload returned to Earth flyby.

Cupples, Mike↗
NASA NTRS2004

Preliminary Sample Analysis Plan for the Cometary and Interstellar Samples Being Returned by the Stardust Spacecraft

The NASA Stardust comet sample return mission is proceeding very well, and the science team breathed a collective sigh of relief following the successful comet sample collection phase which occurred during a 6.1 km/s, 340km-close flyby of comet Wild-2 on Jan 2 of this year. Multiple images of the comet nucleus were obtained and a variety of onboard instruments returned in situ data on the spatial distribution, particle size frequency and composition of the dust in the comet s coma. These data are currently being processed and analyzed. It is expected that 500-1000 comet particles >15 m were collected by impact into low density silica aerogel, as well as many more smaller grains. Previous tests with hypervelocity guns firing small particles into aerogel indicate that material should have successfully been collected by the Stardust aerogel [1&2]. In addition, many (~100) grains of interstellar material newly entering the Solar System should have been collected by the spacecraft during its cruise phase to the comet.

Zolensky, M.↗
NASA NTRS2015

Curation and Analysis of Samples from Comet Wild-2 Returned by NASA's Stardust Mission

The NASA Stardust mission returned the first direct samples of a cometary coma from comet 81P/Wild‐2 in 2006. Intact capture of samples encountered at 6 km/s was enabled by the use of aerogel, an ultralow dense silica polymer. Approximately 1000 particles were captured, with micron and submicron materials distributed along ~mm scale length tracks. This sample collection method and the fine scale of the samples posed new challenges to the curation and cosmochemistry communities. Sample curation involved extensive, detailed photo‐documentation and delicate micro‐surgery to remove particles without loss from the aerogel tracks. This work had to be performed in highly clean facility to minimize the potential of contamination. JSC Curation provided samples ranging from entire tracks to micrometer‐sized particles to external investigators. From the analysis perspective, distinguishing cometary materials from aerogel and identifying the potential alteration from the capture process were essential. Here, transmission electron microscopy (TEM) proved to be the key technique that would make this possible. Based on TEM work by ourselves and others, a variety of surprising findings were reported, such as the observation of high temperature phases resembling those found in meteorites, rarely intact presolar grains and scarce organic grains and submicrometer silicates. An important lesson from this experience is that curation and analysis teams must work closely together to understand the requirements and challenges of each task. The Stardust Mission also has laid important foundation to future sample returns including OSIRIS‐REx and Hayabusa II and future cometary nucleus sample return missions.

Nakamura-Messenger, Keiko↗
NASA NTRS1984

Sample return from a comet flyby

Sample collection and return to the Earth from a fast fly through of a cometary coma is the simplest sample return mission possible from any extraterrestrial body. The mission can provide valuable laboratory samples from a known cometary body and it can do it at low cost, within our lifetimes. The method and the merits of the sample collection process from a comet flyby are discussed.

Brownlee, D. E.↗
NASA NTRS1989

Measurements of long-lived cosmogenic nuclides in returned comet nucleus samples

Measurements of long lived cosmic ray produced radionuclides have given much information on the histories and rates of surface evolution for meteorites, the Moon and the Earth. These nuclides can be equally useful in studying cometary histories and post nebular processing of cometary surfaces. The concentration of these nuclides depends on the orbit of the comet (cosmic ray intensity changes with distance from the sun), the depth of the sampling site in the comet surface, and the rate of continuous evolution of the surface (erosion rate of surface materials). If the orbital parameters and the sampling depth are known, production rates of cosmogenic nuclides can be fairly accurately calculated by theoretical models normalized to measurement on lunar surface materials and meteoritic samples. Due to the continuous evaporation of surface materials, it is expected that the long lived radioactivities will be undersaturated. Accurate measurements of the degree of undersaturation in nuclides of different half-lives allows for the determination of the rate of surface material loss over the last few million years.

Nishiizumi, K.↗
NASA NTRS1989

Isotopic microanalysis of returned comet nucleus samples

If isotopic measurements of interplanetary dust particles (IDPs) and primitive meteorites can serve as a guide to the isotopic analysis of returned comet nucleus material, an essential requirement will be the capability for microanalysis. The reason is that in both types of extraterrestrial samples large isotopic heterogeneities on a small spatial scale have become apparent once it was possible to measure isotopes in small samples. In the discovery of large isotopic anomalies the ion microprobe has played a significant role because of its high spatial resolution for isotopic ratio measurements. The largest isotopic anomalies in C, N, O, Mg, Si, Ca and Ti found to date were measured by ion microprobe mass spectrometry. The most striking examples are D/H measurements in IDPs and isotopic measurements of C, N and Si in SiC from the CM chondrites Murray and Murchison.

Zinner, Ernst↗
NASA NTRS2004

Microgravity Testing of a Surface Sampling System for Sample Return from Small Solar System Bodies

The return of samples from solar system bodies is becoming an essential element of solar system exploration. The recent National Research Council Solar System Exploration Decadal Survey identified six sample return missions as high priority missions: South-Aitken Basin Sample Return, Comet Surface Sample Return, Comet Surface Sample Return-sample from selected surface sites, Asteroid Lander/Rover/Sample Return, Comet Nucleus Sample Return-cold samples from depth, and Mars Sample Return [1] and the NASA Roadmap also includes sample return missions [2] . Sample collection methods that have been flown on robotic spacecraft to date return subgram quantities, but many scientific issues (like bulk composition, particle size distributions, petrology, chronology) require tens to hundreds of grams of sample. Many complex sample collection devices have been proposed, however, small robotic missions require simplicity. We present here the results of experiments done with a simple but innovative collection system for sample return from small solar system bodies.

Franzen, M. A.↗
NASA NTRS1984

Nuclear electric propulsion missions

This paper reviews nuclear electric propulsion technology and missions. The science objectives and mission performance of the following five missions are presented: (1) Neptune orbiter, (2) Saturn ring rendezvous, (3) an asteroid sample return, (4) a comet sample return, and (5) an interstellar precursor mission. A short status of the reactor and thermal to electric conversion technologies is given as well as a brief discussion of ion thruster technology. A specific nuclear reactor power system concept is presented that produces 100 kWe and has a mass of about 2600 kg. Mission performance in terms of payload and flight time is presented for all five missions. Heliocentric trajectories are presented for the Neptune orbiter, Saturn ring rendezvous, and Comet Tempel 2 nucleus sample return missions.

Jones, R. M.↗
NASA NTRS2019

Boom Retraction Mechanism as Part of Sample Acquisition System from Remote and Hazardous Extra-Terrestrial Sites

This paper discusses the development of a mechanism as part of a comet sampling system. The mechanism, known by the acronym BRAD for Boom Retraction and Deployment, is part of a mission proposal to return a comet regolith sample to earth. The mission proposal; CORSAIR for Comet Rendezvous, Sample Acquisition, Investigation, and Return, was coordinated by Johns Hopkins Applied Physics Lab in Laurel, MD as a response to the NASA 2017 New Frontiers AO or Announcement of Opportunity. BRAD functions as a means to tend and control a deployable boom that connects a sample projectile to the spacecraft.

Comet Sample Acquisition Mechanism↗
NASA NTRS2019

Overview of Thermal Design and Challenges for the Comet Astrobiology Exploration SAmple Return (CAESAR) Mission

The Comet Astrobiology Exploration SAmple Return (CAESAR) mission is one of two candidates selected by NASA in response to the New Frontiers 4 Announcement of Opportunity. If selected, CAESAR will fly to comet 67P/Churyumov-Gerasimenko (the same comet studied by ESA’s Rosetta mission) using solar electric propulsion. After some time in orbit around 67P collecting and analyzing images of 67P, a location for collecting a sample will be determined. Up to three “touch-and-go” maneuvers, similar to NASA’s OSIRIS-REx mission, can be attempted with the requirement of collecting at least 80 g of comet sample. Once the sample has been collected, it will be stored in the Sample Containment Subsystem (SCS) and the comet volatiles will be transferred into the Gas Containment System (GCS) for the return cruise back to Earth. As CAESAR approaches Earth, the Sample Return Capsule (SRC), containing the GCS and SCS will separate from the spacecraft and return back to Earth. The sample will be recovered and placed into cold storage for future studies and investigations. CAESAR presents a number of thermal challenges including significantly different power configurations and orientation constraints throughout the mission as well as a large number of mechanisms and configurations that must function at very cold temperatures. The temperature requirements for preserving the sample also present a challenge. This paper presents some of the high level thermal requirements and describes how the CAESAR thermal design was driven by these requirements.

Peabody, Hume L.↗
NASA NTRSDate not supplied

The Stardust Sample Return Mission

The NASA Discovery-class Stardust comet sample return mission collected samples from the coma of Comet 81P/Wild 2 and returned them to Earth for study in 2006. The samples were collected at hypervelocities using low-density aerogel as the spacecraft did a flyby of the comet’s nucleus. In this talk, I will begin by giving an overview of the mission that covers (i) the mission design, (ii) the spacecraft, and (iii) the spacecraft’s encounter with Comet/81P Wild 2 and its subsequent return to Earth. This will be followed by a discussion of many of the principal scientific discoveries that resulted from both the comet flyby and the study of the returned samples in terrestrial laboratories (discoveries that will continue to grow as the returned samples continue to be studied in the future).

Comets↗
NASA NTRS2007

Stardust Curation at Johnson Space Center: Photo Documentation and Sample Processing of Submicron Dust Samples from Comet Wild 2 for Meteoritics Science Community

Dust particles released from comet 81P/Wild-2 were captured in silica aerogel on-board the STARDUST spacecraft and successfully returned to the Earth on January 15, 2006. STARDUST recovered thousands of particles ranging in size from 1 to 100 micrometers. The analysis of these samples is complicated by the small total mass collected ( < 1mg), its entrainment in the aerogel collection medium, and the fact that the cometary dust is comprised of submicrometer minerals and carbonaceous material. During the six month Preliminary Examination period, 75 tracks were extracted from the aerogel cells , but only 25 cometary residues were comprehensively studied by an international consortium of 180 scientists who investigated their mineralogy/petrology, organic/inorganic chemistry, optical properties and isotopic compositions. These detailed studies were made possible by sophisticated sample preparation methods developed for the STARDUST mission and by recent major advances in the sensitivity and spatial resolution of analytical instruments.

Nakamura-Messenger, K.↗
NASA NTRSDate not supplied

The Comet Astrobiology Exploration Sample Return (CAESAR) Mission

The Comet Astrobiology Exploration Sample Return (CAESAR) mission will acquire and return to Earth for laboratory analysis a minimum of 80 grams of surface material from the nucleus of comet 67P/Chur-yumov-Gerasimenko (67P). CAESAR will characterize the surface region sampled, preserve the collected sample in a pristine state, and return evolved volatiles by capturing them in a separate gas reservoir. NASA Goddard Space Flight Center provides project management, systems engineering, safety and mission assurance, contamination control, mission operations, and many other important functions. Northrop Grumman Space Systems will build the spacecraft, based on Dawn mission heritage, which like CAESAR, uses solar electric propulsion. CAESAR was selected by for Phase A study in the New Frontiers 4 Competition and will be proposed to New Frontiers 5.Collection of a sample from the surface of comet 67P is facilitated by a set of cameras that together provide images to support sample site selection, perform optical navigation, and document the sample before, during, and after col-lection. The sample is collected at the end of an arm during a 5-second touch-and-go (TAG) maneuver with the Sample Acquisition System (SAS)designed by Honeybee Robotics for the surface properties of comet 67P observed by the Rosetta mission. After sample collection, and while the sample is still cold (< -80°C), the TAG Arm inserts the sample container into the Sample Containment System (SCS) mounted inside the Sample Return Capsule (SRC). The SCS is sealed, preventing the sample from escaping into space. The sample is slowly warmed inside the SCS to enable sublimation of volatiles, which are collected in the Gas Containment System (GCS), a passively cooled gas reservoir. Separating the volatiles from the solid sample protects the solid sample from alteration. Once all sublimated H2O is transferred to the GCS, the GCS is sealed to capture the volatile sit contains, and the SCS is vented to space to maintain the solid sample under vacuum. The SCS vent is closed before Earth entry to prevent atmospheric contamination. Detailed laboratory analyses of the sample from 67P will trace the history of volatile reservoirs, delineate the chemical pathways that led from simple interstellar species to complex molecules, constrain the evolution of the comet, and evaluate the role of comets in delivering water and prebiotic organics to the early Earth. CAESAR will achieve these goals by carrying out coordinated sample analyses that will link macroscopic properties of the comet with microscale mineralogy, chemistry, and isotopic studies of volatiles and solids. Most of the sample (≥75%) will be set aside for analyses by generations of scientists using continually advancing tools and methods, yielding an enduring scientific treasure that only sample return can provide. This presentation will review development conducted during NF4 Phase A and discuss the NF5 mission concept.

A G Hayes↗
NASA NTRS1987

A comet nucleus sample return mission

A joint ESA/NASA proposal for the acquisition and delivery of samples of the cometary nucleus is considered, and the importance of such samples in providing input as to the origin of the solar system is underlined. Mission options employing all-chemical propulsion, solar electric propulsion, and a combination of the two are explored in detail. Conceptual spacecraft designs have been developed and mass performance estimates made for a wide range of possible targets. The importance of the use of some form of aerobraking during return to earth is noted. Methods for acquiring the nuclear samples are discussed, and characteristics of the mission operations are reviewed.

Kerridge, Stuart J.↗
NASA NTRS1989

Analysis of particulates of comet nucleus samples: Possible use of olivine as indicator phase

The electron microprobe is a proven instrument for particulate analysis and modifications are possible for in situ analysis of particulates in ice at temperatures near that of liquid nitrogen. Present sample requirements allow for polished samples with 0.25 x 0.25 dimensions to be maintained in the sample chamber of a modern electron probe (CAMECA SX-50) at a temperature of -150 C; larger samples are possible but at higher temperatures as determined by thermal conductivity. The major problem is transport and insertion of samples into the instrument through vacuum interlocks. The manufacturer of the above microprobe has designed an exchange mechanism to allow storage and transport of samples previously prepared for their sample holder which attaches to their instrument allowing extraction and insertion of samples while maintaining -150 C temperature. An important test will be the capability of preparing polished surfaces of an ice-particulate sample without loss of particles and at low temperatures. While thin sections of water ice are routine, these are not examined for particulate material and are prepared at temperatures easily obtained in room-size volumes. Anticipated problems include rounding of small grains in the relatively soft ice matrix and the technical problem of dry polishing.

Steele, I. M.↗
NASA NTRS2005

Results of the JIMO Follow-on Destinations Parametric Studies

NASA's proposed Jupiter Icy Moon Orbiter (JIMO) mission currently in conceptual development is to be the first one of a series of highly capable Nuclear Electric Propulsion (NEP) science driven missions. To understand the implications of a multi-mission capability requirement on the JIMO vehicle and mission, the NASA Prometheus Program initiated a set of parametric high-level studies to be followed by a series of more in-depth studies. The JIMO potential follow-on destinations identified include a Saturn system tour, a Neptune system tour, a Kuiper Belt Objects rendezvous, an Interstellar Precursor mission, a Multiple Asteroid Sample Return and a Comet Sample Return. This paper shows that the baseline JIMO reactor and design envelop can satisfy five out of six of the follow-on destinations. Flight time to these destinations can significantly be reduced by increasing the launch energy or/and by inserting gravity assists to the heliocentric phase.

nuclear electric propulsion↗