SEARCH · Search NASA

Results for “Conductive Paste”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Dual Purpose Canister Reactivity and Groundwater Absorption Analyses

The current spent nuclear fuel (SNF) management strategy includes reliance on dry storage. Utilities are meeting their interim storage needs on an individual basis with use of large-capacity dry storage casks, with a current focus on meeting existing storage and transportation requirements, as disposal requirements are not currently available. These casks are commonly known as dual-purpose (i.e., storage and transportation) canisters (DPCs). However, a small percentage of single-purpose (storage only) systems is also being used to meet storage needs. These are included under the “DPC” heading. This report investigates the postclosure criticality safety aspects of DPCs. Placing large, heavy waste packages containing DPCs into a repository for direct disposal has not yet been implemented domestically or internationally. Therefore, direct disposal of DPCs represents new engineering and scientific challenges. Some of the engineering challenges that have already been addressed include handling and placement, use of ramps vs. shafts, use of hoists, use of transport equipment, and thermal management. Additionally, some studies have been conducted in the past regarding the feasibility of direct disposal from a criticality analysis perspective and have concluded that while possible, demonstrating subcriticality over the disposal time period is a challenge. The alternative to direct disposal of DPCs into a repository is to repackage the SNF into different canisters. The direct disposal of DPCs without cutting them open and repackaging is appealing because it could be more cost-effective, reduce the complexity of fuel management operations both in and outside reactor facilities, and result in less cumulative worker dose during interim storage and handling before eventual disposal in a deep geologic repository.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2022

High-Octane Gasoline from Lignocellulosic Biomass via Syngas and Methanol/Dimethyl Ether Intermediates (2021 State of Technology)

The 2021 state of technology (SOT) assessment for the indirect liquefaction (IDL) of lignocellulosic biomass to high-octane gasoline (HOG) via methanol and dimethyl ether (DME) intermediates details the techno-economic analysis (TEA) results and technical progress of the pathway since the 2020 SOT report. A detailed process description and collection of underlying assumptions is given the 2015 design report. In 2021, research efforts rigorously quantified the selectivity of DME to aromatic compounds. As a result, the overall carbon selectivity to hydrocarbon products was updated based upon new findings. Additionally, research conducted over the past few years resulted in successful lower temperature regeneration of NREL's Cu/BEA catalyst with favorable implications on catalyst longevity. Discussions with an engineering firm resulted in an update to the excess air requirement for process combustors (including the char combustor, tar reformer combustor, and catalyst regenerator) in which excess air was reduced from 20% excess to 10%. The cumulative effect of the above efforts was used to calculate a minimum fuel selling price for the modeled pathway. Sensitivity cases examining federal carbon tax credits from CO 2 capture, product selectivity and yield, catalyst lifetime, and other key financial and process parameters were also considered in this assessment.

09 BIOMASS FUELS↗

DOE OSTI2022

Dual Purpose Canister Reactivity and Groundwater Absorption Analyses

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2023

Preliminary Per- and Polyfluoroalkyl Substances Sampling Plan for Pantex Plant

Leidos prepared this Preliminary Per- and Polyfluoroalkyl Substances (PFAS) Sampling Plan for the U.S Department of Energy (DOE) Pantex Plant Consolidated Nuclear Security, LLC (CNS) Pantex, the operations and maintenance (O&M) contractor of Pantex Plant commissioned the Preliminary PFAS Sampling Plan to evaluate the potential risks at the facility and collect preliminary groundwater data at areas within the Plant with the highest potential for PFAS. This plan presents findings from research conducted to assess past and current use of materials containing PFAS and identify areas where these materials were potentially stored, handled, used, or released at Pantex Plant. Pantex Plant is located in Carson County in the Texas Panhandle (Figure 1-1).

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

The effect of neutron irradiation on conventional and nanocrystalline nickel: NSUF Work Package UA-22PN080501 Milestone M3UA-22PN0805012 (Final Report)

Even though nanocrystalline materials (20-100 nm) present an unprecedented potential, scientific knowledge related to the effect of neutron irradiation on the mechanical properties and microstructure is still scarce. Most of the past studies were conducted using ion irradiation which may not have the same effect as neutron irradiation because of the smaller irradiation volume and the higher dose rate. To reach a firm conclusion on the potential of nanocrystalline materials for nuclear reactor applications, extensive study of model metals with different stacking fault energy (SFE) is required to elucidate their behavior in radiation environments. Nanocrystalline copper and nickel are typically chosen because they are commonly used as model FCC metals in studies of radiation effects. Nickel is an FCC metal with a high stacking-fault energy (~125 mJ/m 2 ) compared to copper (~45 mJ/m 2 ). Hence, microcrystalline and nanocrystalline nickel samples were irradiated in the INL’s Advanced Test Reactor (ATR), as a part of FY08 North Carolina State University NSUF Irradiation Experiment# 96 to evaluate the irradiation behavior of these materials. The objective of this FY20 NSUF project# 19122 is to perform PIE (at PNNL NSUF facility) on previously ATR-neutron irradiated (1.2 and 2.6 dpa; 80-89°C) nanocrystalline and microcrystalline nickel samples to investigate the changes in mechanical properties and microstructures and evaluate whether nanocrystalline nickel is relatively more radiation resistant compared to conventional microcrystalline nickel. To perform PIE at PNNL, sixteen neutron irradiated specimens (microcrystalline and nanocrystalline) were transferred from the NSUF Nuclear Fuels and Materials Library at INL. Experimental techniques such as SEM/EBSD, XRD, TEM, Vickers microhardness and tensile testing were employed to characterize the effect of neutron irradiation on the microstructure and mechanical properties of nanocrystalline nickel and compared them with corresponding characteristics of microcrystalline nickel.

36 MATERIALS SCIENCE↗

DOE OSTI2026

ACT University Collaboration Proposal: Role of manufacturing defects on material failure under dynamic loading for developing enhanced failure models and theories (Final Report)

Research on the tensile behavior of additively manufactured 316L stainless steel coupon specimens at increasing strain rates was conducted over the past year at Penn State. Dynamic loading rates into the 1000 1/s loading rates were performed on specimens with nearly 1.32” gage lengths. Stress-strain plots show ductile and plastic behavior well beyond 12% strain with necked specimens, having smaller effective gage lengths showing up to 56% ultimate strain. Additional tests performed on compact tension specimens helped with simulation work to understand the deformation behavior. Using finite elements, it was possible to determine the feasibility of a comprehensive experimental validation study towards an improved model for AM material failure – specifically, the Bai-Wierzbicki approach which accounts for lode angle and triaxiality. A non-significant number of tests are projected for eight specific failure nodes, with additional replicates to provide strain-rate capabilities to the existing formulation. One such correction factor is explored for quasi-static, notched specimens. Finally, stress intensity factor was explored using a set of compact-tension specimens which would also provide useful validation data for any simulation work.

36 MATERIALS SCIENCE↗

NASA NTRS1972

Magnetospheric particle populations.

Significant results of magnetospheric charged particle measurements conducted within the past two years are reviewed in an attempt to provide a general description of relationships among particle populations in the magnetosheath, plasma sheet, extraterrestrial ring current region, electron trough, pseudotrapping region, and stable-trapping region. Special attention is given to the characteristics of protons, electrons, alpha particles, and particles with charge greater than three in the stable trapping region.

Vette, J. I.↗

NASA NTRS1973

Nuclear electric propulsion reactor control systems status

The thermionic reactor control system design studies conducted over the past several years for a nuclear electric propulsion system are described and summarized. The relevant reactor control system studies are discussed in qualitative terms, pointing out the significant advantages and disadvantages including the impact that the various control systems would have on the nuclear electric propulsion system design. A recommendation for the reference control system is made, and a program for future work leading to an engineering model is described.

Ferg, D. A.↗

NASA NTRS1974

Apollo/Skylab suit program-management systems study, volume 1

A management systems study for future spacesuit programs was conducted to assess past suit program requirements and management systems in addition to new and modified systems in order to identify the most cost effective methods for use during future spacesuit programs. The effort and its findings concerned the development and production of all hardware ranging from crew protective gear to total launch vehicles.

Mcniff, M.↗

NASA NTRS1975

Comparison of magnetospheres and radio emissions of Jupiter with earth

The magnetosphere and radio emission of Jupiter is compared with those of the earth. It was predicted that Jupiter would have a Van Allen belt at a radius such that its magnetic field strength would be about equal to that in earth's Van Allen belt and that Jupiter's moon Io travels in the Van Allen belt. Because of Io's low conductivity, plasma sweeping past hits Io, producing a turbulent plasma proboscis which forms hydrodynamic shocks. These shocks travel down the magnetic field lines to the Jovian magnetosphere where they stimulate electron cyclotron emission and free radical spin-flip emission. The free radicals likely to exist abundantly and the richness of the likely decametric frequencies resulting from the many g values of the free radicals are discussed.

Libby, L. M.↗

NASA NTRS1980

Active microwave water equivalence

Measurements of water equivalence using an active FM-CW microwave system were conducted over the past three years at various sites in Colorado, Wyoming, and California. The measurement method is described. Measurements of water equivalence and stratigraphy are compared with ground truth. A comparison of microwave, federal sampler, and snow pillow measurements at three sites in Colorado is described.

Boyne, H. S.↗

NASA NTRS1982

Past Performance analysis of HPOTP bearings

The past performance analysis conducted on three High Pressure Oxygen Turbopump (HPOTP) bearings from the Space Shuttle Main Engine is presented. Metallurgical analysis of failed bearing balls and races, and wear track and crack configuration analyses were carried out. In addition, one bearing was tested in laboratory at very high axial loads. The results showed that the cracks were surface initiated and propagated into subsurface locations at relatively small angles. Subsurface cracks were much more extensive than was appeared on the surface. The location of major cracks in the races corresponded to high radial loads rather than high axial loads. There was evidence to suggest that the inner races were heated to elevated temperatures. A failure scenario was developed based on the above findings. According to this scenario the HPOTP bearings are heated by a combination of high loads and high coefficient of friction (poor lubrication). Different methods of extending the HPOTP bearing life are also discussed. These include reduction of axial loads, improvements in bearing design, lubrication and cooling, and use of improved bearing materials.

Bhat, B. N.↗

NASA NTRS1983

Plasma boundaries and shocks

Work conducted over the past four years on the plasma and magnetic field boundaries in the earth's magnetosphere and interplanetary space is reviewed. Studies of the structure and dynamics of bow shocks based largely on ISEE-1 and -2 measurments are discussed, together with intensive investigations of the particles and waves of the foreshock region, marked by various distributions of return ions reflected from the bow shock. Attention is briefly given to interplanetary shocks and the magnetosheath region, while research on the location, motion and structure and flux transfer events in the magnetopause and on the magnetospheric boundary layer is considered in detail. Evidence of reconnection in the magnetosphere is discussed, and studies of processes in the plasma sheet and neutral sheet in the magnetotail, the polar cusp and the injection of plasma into the inner magnetosphere are noted.

Russell, C. T.↗

NASA NTRS1983

Multidisciplinary research in the space sciences

Research activities were carried out in the following areas during this reporting period: (1) astrophysics; (2) climate and atmospheric modeling; and (3) climate applications of earth observations & geological studies. An ultra-low-noise 115 GHz receiver based upon a superconducting tunnel diode mixer has been designed and constructed. The first laboratory tests have yielded spectacular results: a single-sideband noise temperature of 75 K considerably more sensitive than any other receiver at this frequency. The receiver will replace that currently in use on the Columbia-GISS CO Sky Survey telescope. The 1.2 meter millimeter-wave telescope at Columbia University has been used to complete two large-scale surveys of molecular matter in the part of the inner galaxy which is visible from the Northern hemisphere (the first galactic quadrant); one of the distant galaxy and one of the solar neighborhood. The research conducted during the past year in the climate and atmospheric modeling programs has been focused on the development of appropriate atmospheric and upper ocean models, and preliminary applications of these models. Principal models are a one-dimensional radiative-convective model, a three-dimensional global climate model, and an upper ocean model. During the past year this project has focused on development of 2-channel satellite analysis methods and radiative transfer studies in support of multichannel analysis techniques.

Broecker, W. S.↗

NASA NTRS1986

Atmospheric, climatic and environmental research

Research conducted during the past year in the climate and atmospheric modeling programs was focused on the development of appropriate atmospheric and upper ocean models, and preliminary applications of these models. Prinicpal models are a one-dimensional radiative-convection model, a three-dimensional global climate model, and an upper ocean model. Principal application is the study of the impact of CO2, aerosols and the solar constant on climate. Also the performance of the International Satellite Cloud Climatology Project cloud detection algorithm was evaluated, concentrating initially on its application to geosynchronous data, with an eventual switch of the developed methodologies to data from polar orbiting satellites. In the process, a number of improvements were made, in particular: an improved technique for tracking small scale day to day variability in clear sky continental temperatures; a number of techniques for the statistical assessment of cloud detection uncertainties due to cloud types which are spatially and temporally invariant; and a method used to detect those cloudy regions which have long term spatial and temporal stability.

Broecker, W. S.↗

NASA NTRS1986

Summary of NASA stall/spin research for general aviation configurations

The major milestones of stall/spin research conducted in the past under NACA/NASA programs are reviewed, and recent results offering promise for further improvements in design methodology and concepts for stall/spin technology are identified. Specific results discussed include: (1) development and validation of test techniques and analysis methods; (2) studies of airplane spinning and spin recovery characteristics; and (3) concepts designed to increase the spin resistance of general aviation-type vehicles.

Chambers, J. R.↗

NASA NTRS1988

Head-mounted spatial instruments: Synthetic reality or impossible dream

A spatial instrument is defined as a display device which has been either geometrically or symbolically enhanced to better enable a user to accomplish a particular task. Research conducted over the past several years on 3-D spatial instruments has shown that perspective displays, even when viewed from the correct viewpoint, are subject to systematic viewer biases. These biases interfere with correct spatial judgements of the presented pictorial information. It is also found that deliberate, appropriate geometric distortion of the perspective projection of an image can improve user performance. These two findings raise intriguing questions concerning the design of head-mounted spatial instruments. The design of such instruments may not only require the introduction of compensatory distortions to remove the neutrally occurring biases but also may significantly benefit from the introduction of artificial distortions which enhance performance. These image manipulations, however, can cause a loss of visual-vestibular coordination and induce motion sickness. Additionally, adaptation to these manipulations is apt to be impaired by computational delays in the image display. Consequently, the design of head-mounted spatial instruments will require an understanding of the tolerable limits of visual-vestibular discord.

Ellis, Stephen R.↗

NASA NTRS1990

Applications of ISES for the atmospheric sciences

The proposed Information Sciences Experiment System (ISES) will offer the opportunity for real-time access to measurements acquired aboard the Earth Observation System (Eos) satellite. These measurements can then be transmitted to remotely located ground based stations. The application of such measurements to issues related to atmospheric science which was presented to a workshop convened to review possible application of the ISES in earth sciences is summarized. The proposed protocol for Eos instruments requires that measurement results be available in a central data archive within 72 hours of acquiring data. Such a turnaround of raw satellite data to the final product will clearly enhance the timeliness of the results. Compared to the time that results from many current satellite programs, the 72 hour turnaround may be considered real time. Examples are discussed showing how real-time measurements from one or more of the proposed Eos instruments could have been applied to the study of certain issues important to global atmospheric chemistry. Each of the examples discussed is based upon a field mission conducted during the past five years. Each of these examples will emphasize how real-time data could have been used to alter the course of a field experiment, thereby enhancing the scientific output. For the examples, brief overviews of the scientific rationale and objectives, the region of operation, the measurements aboard the aircraft, and finally how one or more of the proposed Eos instruments could have provided data to enhance the productivity of the mission are discussed.

Hoell, James M., Jr.↗