Search NASA⌕ Search

SEARCH · Search NASA

Results for “Core photographs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Experiments on the Distribution of Fuel in Fuel Sprays

The distribution of fuel in sprays for compression-ignition engines was investigated by taking high-speed spark photographs of fuel sprays reproduced under a wide variety of conditions, and also by injecting them against pieces of plasticine. A photographic study was made of sprays injected into evacuated chambers, into the atmosphere, into compressed air, and into transparent liquids. Pairs of identical sprays were injected counter to each other and their behavior analyzed. Small high velocity air jets were directed normally to the axes of fuel sprays, with the result that the envelope of spray which usually obscures the core was blown aside, leaving the core exposed on one side. The results showed that the distribution of the fuel within the sprays was very uneven.

Lee, Dana W↗

The dwarf spheroidal galaxy in Draco. III - Proper motion membership probabilities

PDS astrometry from photographic plates of the Draco dwarf galaxy is used to derive proper motion membership probabilities for stars measured in earlier photometric studies. It is found that removing probable foreground stars from the color-magnitude diagram of Draco tends to strengthen earlier conclusions about the structure of the giant and subgiant branches. The possible existence of an upper horizontal branch containing core helium-burning stars of more than one solar mass is still questionable. A reduced proper motion diagram for probable foreground stars is presented and discussed briefly.

Stetson, P. B.↗

Experiments on the Distribution of Fuel in Fuel Sprays

The distribution of the fuel in sprays for compression-ignition engines was investigated by taking high-speed spark photographs of fuel sprays produced under a wide variety of conditions, and also by injecting them against pieces of Plasticine. A photographic study was made of sprays injected into evacuated chambers, into the atmosphere, into compressed air, and into transparent liquids. Pairs of identical sprays were injected counter to each other and their behavior analyzed. Small high-velocity air jets were directed normally to the axes of fuel sprays, with the result that the envelope of spray which usually obscures the core was blown aside, leaving the core exposed on one side.

Lee, Dana W↗

The N.A.C.A. Apparatus for Studying the Formation and Combustion of Fuel Sprays and the Results from Preliminary Tests

Described here is an apparatus for studying the formation and combustion of fuel sprays under conditions closely simulating those in a high speed compression-ignition engine. The apparatus consists of a single-cylinder modified test engine, a fuel injection system so designed that a single charge of fuel can be injected into the combustion chamber, an electric driving motor, and a high-speed photographic apparatus. The cylinder head of the engine has a vertical disk form of combustion chamber whose sides are glass windows. When the fuel is injected into the combustion chamber, motion pictures at the rate of 2000 per second are taken of the spray formation by means of spark discharges. When combustion takes place, the light of combustion is recorded on the same photographic film as the spray photographs. Included here are the results of some tests to determine the effect of air temperature, air flow, and nozzle design on the spray formation. The results show that the compression temperature has little effect on the penetration of the fuel spray, but does not affect the dispersion, that air velocities of about 300 feet per second are necessary to destroy the core of the spray, and that the effect of air flow on the spray is controlled to a certain extent by the design of the injection nozzle. The results on the combustion of the spray show that when ignition does not take place until after spray cut-off, the ignition may start almost simultaneously throughout the combustion chamber or at different points throughout the chamber. When ignition takes place before spray cut-off, the combustion starts around the edge of the spray and then spreads throughout the chamber.

Rothrock, A M↗

The distribution of galaxies in Abell 1975

The distribution of galaxies in the field of Abell 1795 is studied, based on a red photograph obtained with the Palomar 1.2 m Schmidt telescope. A battery of statistical tests has been applied to the positional data of galaxies in A 1795, in order to assess the significance of asymmetry and subclustering. The large-scale distribution of galaxies is asymmetric, with an elongation to the north. Although there appear to be two, or possibly three, clumps of galaxies in the cluster core, various statistical tests provide no convincing evidence for subclustering. This may be due to the small number of galaxies in the core. These results are discussed in light of the recent observations by Hill et al. (1988) that the cD galaxy in A 1795 has a large peculiar velocity with respect to the cluster mean.

Oegerle, William R.↗

An Optical Study of the Faint End of the Stellar Luminosity Function

We implement a new method by which to study the faint end of the field star luminosity function. The method relies on deep, multicolor photometry of fields projected against highly obscured, nearby molecular clouds. The clouds act as nearly opaque screens and delimit a well- defined survey volume which is in principle free of the problem of distinguishing nearby, intrinsically faint dwarf stars from more distant red giants. This study is based upon deep photographic and CCD photometry at optical (V,R,I) bandpasses towards the most highly obscured portions of the Taurus and Ophiuchus molecular clouds. The total volume delimited by the clouds is similar 200 pc^3. Within this region our survey is complete for all stars brighter than M_v = 16 - 17 mag; at R and I, the survey is complete down to the lowest mass stars capable of sustaining core hydrogen burning...

Herbst, W.↗

An optical study of the faint end of the stellar luminosity function

We implement a new method by which to study the faint end of the field star luminosity function. The method relies on deep, multicolor photometry of fields projected against highly obscured, nearby molecular clouds. The clouds act as nearby opaque screens and delimit a well-defined survey volume which is in principle free of the problem of distinguishing nearby, intrinsically faint dwarf stars from more distant red giants. This study is based upon deep photographic and CCD photometry at optical (V, R, I) bandpasses toward the most highly obscured portions of the Taurus and Ophiuchus molecular clouds. The total volume delimited by the clouds is approximately 200 cu pc. Within this region our survey is complete for all stars brighter than M(sub V) = 16-17 mag; at R and I, the survey is complete down to the lowest mass stars capable of sustaining core hydrogen burning. We estimate the faint end of the field star luminosity function for the composite Taurus and Ophiuchus foreground sample and find that it resembles the local luminosity function down to M(sub V) approx. 16. At still fainter magnitudes we find more stars than do photometric parallex studies of the polar regions. This difference widens dramatically if even the simplest correction for incompleteness is applied to our data. We therefore tentatively conclude that the luminosity function rises beyond M(sub V) approx. 16; even if we discard our attempts to correct for incompleteness in the faintest magnitude bins, the luminosity function at least remains flat for the lowest mass stars. Our provisional finding that the luminosity function rises beyond its well-known peak at M(sub V) approx. 12-13, implies that the initial mass function (IMF) probably rises beyond the turnover point associated with this peak. Even if our most conservative estimate for the faint end of the luminosity function is used-in which no corrections are made for incompleteness-the IMF must at least remain flat down to the edge of the hydrogen-burning main sequence.

Jarrett, T. H.↗

Red and nebulous objects in dark clouds - A survey

A search on the NGS-PO Sky Survey photographs has revealed 150 interesting nebulous and/or red objects, mostly lying in dark clouds and not previously catalogued. Spectral classifications are presented for 55 objects. These indicate a small number of new members of the class of Herbig-Haro objects, a significant number of new T Tauri stars, and a few emission-line hot stars. It is argued that hot, high-mass stars form preferentially in the dense cores of dark clouds. The possible symbiosis of high and low mass stars is considered. A new morphology class is defined for cometary nebulae, in which a star lies on the periphery of a nebulous ring.

Cohen, M.↗

Photographic, near-infrared, and CCD photometry of the distant globular cluster AM-1

New photographic, CCD, and near-infrared photometry of stars in the distant globular cluster AM-1 are presented. Based on the photographic and CCD photometry down to the horizontal branch, a distance modulus (m-M)v = 20.4 mag is derived, with E(B-V) = 0.0 mag, corresponding to a distance of 120 kpc from the sun. Using the (V-K) colors of two giants in AM-1, a metallicity of Fe/H = -2.0 + or - 0.2 is deduced, in good agreement with earlier determinations. Using complete photometry and star counts, a core radius of 10 arcsec (6 pc) and a tidal radius of 100 arcsec (58 pc) are derived. Despite the low intrinsic luminosity (Mv = -5.0 mag) and the large galactocentric distance of this globular cluster, the apparent magnitude distribution of the giant branch stars of AM-1 is not found to be unusual.

Madore, Barry F.↗

Microgravity Flow Boiling Experiments With Liquid-Vapor Mixture Inlet Onboard the International Space Station

This article is part of a series of studies culminating from the multi-objective Flow Boiling and Condensation Experiment (FBCE) onboard the International Space Station, which utilized the Flow Boiling Module (FBM) for experiments between February and July 2022. This study investigates microgravity flow boiling of n-Perfluorohexane with liquid-vapor mixture (two-phase) inlet conditions to the FBM with either one or two opposite walls heated. The FBM’s channel has a rectangular cross-sectional area of 5.0 × 2.5 mm 2 and a heated length of 114.6 mm. Key parameters of interest include mass velocity (180 – 2400 kg/m 2 s), inlet quality (-0.01 – 0.87), inlet pressure (120 – 200 kPa), and heat flux (1.8 W/cm 2 to critical heat flux), and a large database is amassed. The flow is visualized via a high-speed video camera and photographs are recorded at each heating increment to assess the periodic flow patterns within the channel and the near-wall interfacial behavior. Flow patterns are complex and mainly characterized by high- and low-density fronts alternately traversing the channel to yield high- and low-density-dominant periods of boiling. At all operating conditions, high-density fronts are faster during high-density-dominant periods. At low inlet qualities, the flow is annular near the channel inlet with a central vapor core surrounded by an annular liquid layer. Each high-density front having a high liquid fraction leaves a thin liquid layer sheared onto the heated walls. Boiling occurs within the liquid layer and a vapor layer is formed next to the heated wall. Inlet quality and mass velocity most dictate the overall flow patterns followed by heating configuration, and to a much lesser extent, heat flux and inlet pressure. Heat transfer characteristics are assessed via averaged boiling curves, streamwise profiles of wall temperature and heat transfer coefficient, and parametric curves of local and averaged heat transfer coefficients. Inlet pressure has an insignificant effect on heat transfer. At similar operating conditions, both the heating configurations yield similar trends and values of heat transfer coefficient and critical heat flux (CHF, slightly higher for single-sided) even though double-sided heating adds twice the heat to the fluid and doubly raises local quality. The heat fluxes required for both onset of nucleate boiling degradation and CHF are larger at high mass velocities and low inlet qualities. For a fixed inlet quality, high mass velocities yield higher average heat transfer coefficients at both lower and higher heat fluxes, while the nucleate boiling regime at intermediate heat fluxes is unaffected. For a fixed mass velocity, higher inlet qualities yield higher and lower average heat transfer coefficients at lower and higher heat fluxes, respectively.

Microgravity↗

The dwarf spheroidal galaxy in Draco. I - New BV photometry. II - Galactic foreground reddening

BV photoelectric photometry for 39 stars and BV photographic photometry for 514 stars in the field of the Draco dwarf spheroidal galaxy are presented. The color-magnitude diagram for 512 of these field stars is found to display a well-defined red horizontal branch as well as a red giant branch whose observed width is comparable to the accidental photometric error. The results also indicate that a more diffuse sequence of stars lies about 0.1 mag to the blue of the giant branch and that an upper horizontal branch of more massive core helium-burning stars may also be present. The foreground reddening toward Draco is then determined by narrow-band uvby-beta photometry of galactic B-A-F stars.

Stetson, P. B.↗

Fluid dynamic aspects of jet noise generation

Jet engine noise generation and noise propagation was investigated by studying supersonic nozzle flow of various nozzle configurations in an experimental test facility. The experimental facility was constructed to provide a coaxial axisymmetric jet flow of unheated air. In the test setup, an inner primary flow exhausted from a 7 in. exit diameter convergent--divergent nozzle at Mach 2, while a secondary flow had a 10 in. outside diameter and was sonic at the exit. The large dimensions of the jets permitted probes to be placed inside the jet core without significantly disturbing the flow. Static pressure fluctuations were measured for the flows. The nozzles were designed for shock free (balanced) flow at Mach 2. Data processing techniques and experimental procedures were developed in order to study induced disturbances at the edge of the supersonic flows, and the propagation of those disturbances throughout the flows. Equipment used (specifications are given) to record acoustic levels (far field noise) is described. Results and conclusions are presented and discussed. Diagrams of the jet flow fields are included along with photographs of the test stand.

Barra, V.↗

The auroral green line in Perseid spectra near sunspot maximum

Thirty-one spectra photographed during the Perseid showers of 1969 and 1970 are found to exhibit greater ionization and stronger, more frequent appearance of the forbidden oxygen line at 5577 A than Perseid spectra obtained with the same instrument in 1961. Data from 13 Perseid showers indicate a relationship between the frequency of occurrence of the oxygen line and solar activity. In 1969-70, near sunspot maximum, the strength of this auroral green line is greatest near shower maximum, as though the nature of the meteoroids were a function of their distance from the core of the stream, or, alternatively, the strength of the green line were a function of the altitude of the radiant.

Russell, J. A.↗

A Comparison of Fuel Sprays from Several Types of Injection Nozzles

This report presents the tests results of a series of tests made of the sprays from 14 fuel injection nozzles of 9 different types, the sprays being injected into air at atmospheric density and at 6 and 14 times atmospheric density. High-speed spark photographs of the sprays from each nozzle at each air density were taken at the rate of 2,000 per second, and from them were obtained the dimensions of the sprays and the rates of spray-tip penetration. The sprays were also injected against plasticine targets placed at different distances from the nozzles, and the impressions made in the plasticine were used as an indication of the distribution of the fuel within the spray. Cross-sectional sketches of the different types of sprays are given showing the relative sizes of the spray cores and envelopes. The characteristics of the sprays are compared and discussed with respect to their application to various types of engines.

Lee, Dana W↗

Depositional history of core 15008/7 - Some implications regarding slope processes

Structures and associated vertical changes in lithology of core 15008/7 are discussed with a view to providing data for interpretation of regolith-forming and accumulation processes that can take place on a continuous slope upon an impact-dominated surface. The light-colored soil between 49.1 and 55.6 cm in core 15007 is rich in clasts which contain abundant green glass and appears to be ejecta from downslope. The dark massive soils between 17.5 and 49.1 cm contain many crater bottom structures and crater fill, but apparently no rim-crest or proximal ejecta. The higher parts of the crater deposits appear to be removed by erosion, whereas the crater fill is preferentially preserved. Such material may be typical of slope deposits. The light-colored soil with contorted, friable clasts, between 0 and 17.5, appears to be ejecta from the crater seen in the sampling photographs.

Nagle, J. S.↗

The X-ray cluster Abell 744

X-ray and optical observations of the cluster of galaxies Abell 744 are presented. The X-ray flux (assuming H(0) = 100 km/s per Mpc) is about 9 x 10 to the 42nd erg/s. The X-ray source is extended, but shows no other structure. Photographic photometry (in Kron-Cousins R), calibrated by deep CCD frames, is presented for all galaxies brighter than 19th magnitude within 0.75 Mpc of the cluster center. The luminosity function is normal, and the isopleths show little evidence of substructure near the cluster center. The cluster has a dominant central galaxy, which is classified as a normal brightest-cluster elliptical on the basis of its luminosity profile. New redshifts were obtained for 26 galaxies in the vicinity of the cluster center; 20 appear to be cluster members. The spatial distribution of redshifts is peculiar; the dispersion within the 150 kpc core radius is much greater than outside. Abell 744 is similar to the nearby cluster Abell 1060.

Kurtz, M. J.↗

The location of the site of energy release in a solar X-ray subflare

A rapid sequence of high-resolution X-ray photographs was obtained by the S-054 X-ray Telescope Experiment on Skylab on 1973 September 1. During the course of this observation, photographs were obtained of a flarelike brightening in a simple, bipolar active region. Analysis reveals the following facts. The event had the form of a small, elongated bright feature whose narrowest dimension was less than seconds of arc. The brightness peak of the flarelike brightening was located within seconds of arc of the center of brightness of a preexisting loop structure that crossed the magnetic neutral line. This loop was observed to brighten gradually beginning approximately 10 minutes prior to the flarelike event. During the rise of the event, the 2-17 A X-ray brightness of the center of the subflare core rose by over a factor of 10 in a time period of 196 seconds or less.

Petrasso, R. D.↗

Development of Life on Early Mars

Exploration of Mars has begun to unveil the history of the planet. Combinations of remote sensing, in situ compositional measurements and photographic observations have shown Mars had a dynamic and active geologic evolution. Mars geologic evolution encompassed conditions that were suitable for supporting life. A habitable planet must have water, carbon and energy sources along with a dynamic geologic past. Mars meets all of these requirements. The first 600 My of Martian history were ripe for life to develop because of the abundance of (i) Water- as shown by carved canyons and oceans or lakes with the early presence of near surface water shown by precipitated carbonates in ALH84001, well-dated at ~3.9 Gy, (ii) Energy from the original accretional processes, a molten core which generated a strong magnetic field leaving a permanent record in the early crust, active volcanism continuing throughout Martian history, and continuing impact processes, (iii) Carbon, water and a likely thicker atmosphere from extensive volcanic outgassing (i.e. H20, CO2, CH4, CO, O2, N2, H2S, SO2, etc.) and (iv) crustal tectonics as revealed by faulting and possible plate movement reflected by the magnetic pattern in the crust [1]. The question arises: "Why would life not develop from these favorable conditions on Mars in its first 600 My?" During this period, environmental near-surface conditions on Mars were more favorable to life than at any later time. Standing bodies of water, precipitation and flowing surface water, and possibly abundant hydrothermal energy would favor the formation of early life. (Even if life developed elsewhere on Earth, Venus, or on other bodies-it was transported to Mars where surface conditions were suitable for life to evolve). The commonly stated requirement that life would need hundreds of millions of year to get started is only an assumption; we know of no evidence that requires such a long interval for the development of life, if the proper habitable conditions are meet. Perhaps it could start in a very short interval during the first tens of millions of years after crustal formation. Even with impact-driven extinction events, such a short start-up time would allow life to restart multiple times until it persevered. If panspermia is considered, life could be introduced as soon as liquid surface water was present and could instantly thrive and spread.

Gibson, Everett K.↗