Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIGITAL TECHNIQUE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Planetary cartography in the next decade: Digital cartography and emerging opportunities

Planetary maps being produced today will represent views of the solar system for many decades to come. The primary objective of the planetary cartography program is to produce the most complete and accurate maps from hundreds of thousands of planetary images in support of scientific studies and future missions. Here, the utilization of digital techniques and digital bases in response to recent advances in computer technology are emphasized.

Source record↗
NASA NTRS1972

Measurements of ultrasonic velocities using a digital averaging technique.

A new pulse-echo technique using real-time digital averaging is described for measuring the phase velocity in solids up to 50 MHz. The technique can measure the transit time between any two echoes to an absolute accuracy of 0.1 nsec and measure small changes in transit time to a sensitivity of 20 psec. Experimental examples are given based upon ultrasonic velocity measurements in a single crystal superconductor.

Lacy, L. L.↗
NASA NTRS1974

Optimal space communications techniques

Digital multiplication of two waveforms using delta modulation (DM) is discussed. It is shown that while conventional multiplication of two N bit words requires N2 complexity, multiplication using DM requires complexity which increases linearly with N. Bounds on the signal-to-quantization noise ratio (SNR) resulting from this multiplication are determined and compared with the SNR obtained using standard multiplication techniques. The phase locked loop (PLL) system, consisting of a phase detector, voltage controlled oscillator, and a linear loop filter, is discussed in terms of its design and system advantages. Areas requiring further research are identified.

Schilling, D. L.↗
NASA NTRS1997

Video Skimming and Characterization through the Combination of Image and Language Understanding Techniques

Digital video is rapidly becoming important for education, entertainment, and a host of multimedia applications. With the size of the video collections growing to thousands of hours, technology is needed to effectively browse segments in a short time without losing the content of the video. We propose a method to extract the significant audio and video information and create a "skim" video which represents a very short synopsis of the original. The goal of this work is to show the utility of integrating language and image understanding techniques for video skimming by extraction of significant information, such as specific objects, audio keywords and relevant video structure. The resulting skim video is much shorter, where compaction is as high as 20:1, and yet retains the essential content of the original segment.

IMAGE PROCESSING↗
NASA NTRS1981

Georgia resource assessment project: Institutionalizing LANDSAT and geographic data base techniques

Digital data from LANDSAT for each 1.1-acre cell in Georgia were processed and the land cover conditions were categorized. Several test cases were completed and an operational hardware and software processing capability was established at the Georgia Institute of Technology. The operational capability was developed to process the entire state (60,000 sq. miles and 14 LANDSAT scenes) in a cooperative project between eleven divisions and agencies at the regional, state, and federal levels. Products were developed for State agencies such as in both mapped and statistical formats. A computerized geographical data base was developed for management programs. To a large extent the applications of the data base evolved as users of LANDSAT information requested that other data (i.e., soils, slope, land use, etc.) be made compatible with LANDSAT for management programs. To date, geographic data bases incorporating LANDSAT and other spatial data deal with elements of the municipal solid waste management program, and reservoir management for the Corps of Engineers. LANDSAT data are also being used for applications in wetland, wildlife, and forestry management.

Pierce, R. R.↗
NASA NTRS1976

Design of a digital compression technique for shuttle television

The determination of the performance and hardware complexity of data compression algorithms applicable to color television signals, were studied to assess the feasibility of digital compression techniques for shuttle communications applications. For return link communications, it is shown that a nonadaptive two dimensional DPCM technique compresses the bandwidth of field-sequential color TV to about 13 MBPS and requires less than 60 watts of secondary power. For forward link communications, a facsimile coding technique is recommended which provides high resolution slow scan television on a 144 KBPS channel. The onboard decoder requires about 19 watts of secondary power.

Habibi, A.↗
NASA NTRS1983

Diagnostic analysis of vibration signals using adaptive digital filtering techniques

Signal enhancement techniques are described using recently developed digital adaptive filtering equipment. Adaptive filtering concepts are not new; however, as a result of recent advances in microprocessor-based electronics, hardware has been developed that has stable characteristics and of a size exceeding 1000th order. Selected data processing examples are presented illustrating spectral line enhancement, adaptive noise cancellation, and transfer function estimation in the presence of corrupting noise.

Jewell, R. E.↗
NASA NTRS1990

Measurement of fluid velocity fields using digital correlation techniques

A new aperiodic recording technique for measuring fluid velocity fields by digital correlation is introduced which uses a low-powered He-Ne laser, a desktop computer, and a lightly seeded fluid. In contrast to optical methods, this technique does not need to use laser light to interrogate the image pattern, so no secondary speckle is introduced. Also, the lower limit of displacement measurement is determined by the resolution of the sensor used and the magnification of the camera, and can be much lower than the speckle size, so a considerably wider range of measurement is possible than with optical processing. The technique can be completely automated and is potentially much faster than all of the optical methods currently used for flow visualization.

Matthys, Donald R.↗
NASA NTRS1988

Analog-to-digital conversion techniques for precision photometry

Three types of analog-to-digital converters are described: parallel, successive-approximation, and integrating. The functioning of comparators and sample-and-hold amplifiers is explained. Differential and integral linearity are defined, and good and bad examples are illustrated. The applicability and relative advantages of the three types of converters for precision astronomical photometric measurements are discussed. For most measurements, integral linearity is more important than differential linearity. Successive-approximation converters should be used with multielement solid state detectors because of their high speed, but dual slope integrating converters may be superior for use with single element solid state detectors where speed of digitization is not a factor. In all cases, the input signal should be tailored so that they occupy the upper part of the converter's dynamic range; this can be achieved by providing adjustable gain, or better by varying the integration time of the observation if possible.

Opal, Chet B.↗
NASA NTRS1968

Improved technique for digital simulation of bending and slosh phenomena

Mathematical model representation of bending and slosh phenomena in the Saturn vehicle results in linear second order differential equations. Improved technique was developed to provide a real-time digital solution of the equations. The technique may also be applied to nonreal time digital simultations, resulting in savings of digital computer time.

Stauffer, N. E.↗
NASA NTRS2013

Advances in Digital Calibration Techniques Enabling Real-Time Beamforming SweepSAR Architectures

Real-time digital beamforming, combined with lightweight, large aperture reflectors, enable SweepSAR architectures, which promise significant increases in instrument capability for solid earth and biomass remote sensing. These new instrument concepts require new methods for calibrating the multiple channels, which are combined on-board, in real-time. The benefit of this effort is that it enables a new class of lightweight radar architecture, Digital Beamforming with SweepSAR, providing significantly larger swath coverage than conventional SAR architectures for reduced mass and cost. This paper will review the on-going development of the digital calibration architecture for digital beamforming radar instrument, such as the proposed Earth Radar Mission's DESDynI (Deformation, Ecosystem Structure, and Dynamics of Ice) instrument. This proposed instrument's baseline design employs SweepSAR digital beamforming and requires digital calibration. We will review the overall concepts and status of the system architecture, algorithm development, and the digital calibration testbed currently being developed. We will present results from a preliminary hardware demonstration. We will also discuss the challenges and opportunities specific to this novel architecture.

TR (Transmit/Receive)↗
DOE OSTI2023

Visible Light Communications: A Survey on Recent High-Capacity Demonstrations and Digital Modulation Techniques

In order to deal with the increasing number of mobile devices and with their demand for Internet services, particularly social media platforms, streaming video, and online gaming, Radio-Frequency (RF) wireless networks have been pushed to their capacity limits. In addition to this, 80% of the total data traffic is carried out by users inside buildings. Therefore, new technologies have started to be considered for indoor wireless communications. Visible Light Communications (VLC) can provide both illumination and communications, appearing as an alternative or complement to RF wireless networks. VLC offers high bandwidth and immunity to interference from electromagnetic sources. This manuscript reviews recent high-capacity VLC demonstrations. The main focus of this work is to present digital-signal-processing techniques used in VLC systems. Different modulation formats are analyzed, which can be divided into two large groups, namely single-carrier and multi-carrier modulation schemes. Finally, some recently proposed capacity-achieving strategies are presented. We discuss how to implement these techniques and how they will be useful for the continued development of VLC systems.

Loureiro, Pedro A. (ORCID:0000000283546185)↗
NASA NTRS1974

Scene correction (precision techniques) of ERTS sensor data using digital image processing techniques

Techniques have been developed, implemented, and evaluated to process ERTS Return Beam Vidicon (RBV) and Multispectral Scanner (MSS) sensor data using digital image processing techniques. The RBV radiometry has been corrected to remove shading effects, and the MSS geometry and radiometry have been corrected to remove internal and external radiometric and geometric errors. The results achieved show that geometric mapping accuracy of about one picture element RMS and two picture elements (maximum) can be achieved by the use of nine ground control points. Radiometric correction of MSS and RBV sensor data has been performed to eliminate striping and shading effects to about one count accuracy. Image processing times on general purpose computers of the IBM 370/145 to 168 class are in the range of 29 to 3.2 minutes per MSS scene (4 bands). Photographic images of the fully corrected and annotated scenes have been generated from the processed data and have demonstrated excellent quality and information extraction potential.

Bernstein, R.↗