Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data Comm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

61 records · Page 4

AmeriFlux CA-Mer Ontario - Eastern Peatland, Mer Bleue

This is the AmeriFlux version of the carbon flux data for the site CA-Mer Ontario - Eastern Peatland, Mer Bleue. Site Description - The Mer Bleue peatland is primarily a large ombrotrophic bog located in the Ottawa River Valley, 10 km east of Ottawa, Ontario, Canada (45.40º N lat., 75.50º W long.). Mean annual temperature is 6.3ºC ranging from -10.5ºC in January to 21.0ºC in July. Mean annual precipitation is 943 mm, 268 mm of which falls during the summer months (Environment Canada; climate normals). Peat began to form approximately 8500 years ago, but the bog phase began later, about 6400 years ago (Lafleur et al., 2003; Richard, pers. comm.). The peat depth now ranges from 2 m at the edge to >5 m in the middle. Beaver ponds are found at the lagg margin of the bog. The bog is dominated by plant communities comprised primarily of the ericaceous shrubs Chamaedaphne calyculata (L.) Moench, Ledum groenlandicum Oeder, and Kalmia angustifolia L. Clusters of the deciduous shrub Vaccinium myrtilloides Michx. and the tufted sedge Eriophorum vaginatum L. are fairly common across the bog. The most common tree species found in the bog are Larix laricina (Duroi) K. Koch., Betula populifolia Marshall and Picea mariana (Miller) BSP occurring less frequently. In the poor fen, located to the north of the bog proper, community composition is primarily composed of the ericaceous shrubs listed above, including higher densities of K. angustifolia and Andromeda glaucophylla Link. The primary sedge in this area is Carex oligosperma Michx. All sites are dominated by an under story of bryophytes, mainly Sphagnum magellanicum Brid., Sphagnum capillifolium (Ehrh.) Hedw., and Polytrichum strictum Brid. in the bog, with Sphagnum papillosum Lindb., and Sphagnum fallax (Klinggr.) Klinggr. common in the wetter portions of the poor fen

Humphreys, Elyn↗

AmeriFlux FLUXNET-1F CA-Mer Ontario - Eastern Peatland, Mer Bleue

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site CA-Mer Ontario - Eastern Peatland, Mer Bleue. This is the FLUXNET version of the carbon flux data for the site CA-Mer Ontario - Eastern Peatland, Mer Bleue produced by applying the standard ONEFlux (1F) software. Site Description - The Mer Bleue peatland is primarily a large ombrotrophic bog located in the Ottawa River Valley, 10 km east of Ottawa, Ontario, Canada (45.40º N lat., 75.50º W long.). Mean annual temperature is 6.3ºC ranging from -10.5ºC in January to 21.0ºC in July. Mean annual precipitation is 943 mm, 268 mm of which falls during the summer months (Environment Canada; climate normals). Peat began to form approximately 8500 years ago, but the bog phase began later, about 6400 years ago (Lafleur et al., 2003; Richard, pers. comm.). The peat depth now ranges from 2 m at the edge to >5 m in the middle. Beaver ponds are found at the lagg margin of the bog. The bog is dominated by plant communities comprised primarily of the ericaceous shrubs Chamaedaphne calyculata (L.) Moench, Ledum groenlandicum Oeder, and Kalmia angustifolia L. Clusters of the deciduous shrub Vaccinium myrtilloides Michx. and the tufted sedge Eriophorum vaginatum L. are fairly common across the bog. The most common tree species found in the bog are Larix laricina (Duroi) K. Koch., Betula populifolia Marshall and Picea mariana (Miller) BSP occurring less frequently. In the poor fen, located to the north of the bog proper, community composition is primarily composed of the ericaceous shrubs listed above, including higher densities of K. angustifolia and Andromeda glaucophylla Link. The primary sedge in this area is Carex oligosperma Michx. All sites are dominated by an under story of bryophytes, mainly Sphagnum magellanicum Brid., Sphagnum capillifolium (Ehrh.) Hedw., and Polytrichum strictum Brid. in the bog, with Sphagnum papillosum Lindb., and Sphagnum fallax (Klinggr.) Klinggr. common in the wetter portions of the poor fen

Humphreys, Elyn [Carleton University]↗

My Internship at NASA

My name is Isaac Lopez and I am a junior at the University of Houston majoring in Mechanical Engineering Technology. I will be completing my first tour at the NASA-Johnson Space Center ("JSC") as a Mechanical Engineer within the Human Interfaces Branch. Throughout my tour, I was given the opportunity to work on multiple projects that have expanded my knowledge and interest in acoustics and engineering design. One of the projects I worked on at JSC consisted of doing acoustic simulation of the EVA comm. cap. While working on the comm. cap headset, my main duty consisted of simulating the acoustics of the headset to find a solution to the condensing water that can accumulate and block the acoustic tube, causing attenuation or complete loss of audio in one ear for an astronaut using the EVA. For this project, I had to create a Creo model of the comm. cap so that I would be able to import it into Comsol for acoustic simulation. I also had the opportunity to design a portable and lightweight beam degrader for the EEE Parts and Radiation team. With the help of Creo, I was able to make a CAD design and put together a small working prototype for the radiation team to demonstrate the capabilities that the beam degrader had. In addition to these projects, JSC allowed me to work closely on projects with other interns. I had the opportunity to help another intern with his acoustic diverter, intended to improve the sound quality in Node 1 of the ISS. During this project, I helped with some of the acoustic testing inside the anechoic chamber as well as helping record data during testing at the ISS mock up. During the course of my first tour, I was able to learn and continually improve on my CAD drafting skills. With each project I worked on, I acquired new ways to create and improve various designs with various constraints. Furthermore, I also had the opportunity to work with electrical engineers and learn about the electronic components that would provide control of the beam degrader functions. I was able to take the knowledge, skills and designs I had acquired during my tour at JSC (such as Finite Element Analysis) and apply them to my work on the Comsol Multiphysics software for acoustics simulation. I was also able to use it to do some stress analysis on a proposed design for a proposed Habitat structure. My time at JSC has been invaluable as it helped me grow and more fully-comprehend my major as well as spark an interest in acoustics and how much it relates to mechanical engineering. This internship has taught me that engineering is much more than a profession - it is embedded in our daily lives as a puzzle that requires critical thinking as an everyday challenge that makes life more interesting.

Lopez, Isaac↗

TeMPI Shim

This is the manual for the TeMPI Shim library, whose goal is to facilitate scientific apps being loosely coupled through MPI. TeMPI Shim can be used to create and manage Message Passing Interface (MPI, see [MPI]) Communicators for Single Program, Multiple Data (SPMD, see [SPMD]) and Multiple Programs, Multiple Data (MPMD, see [MPMD]) workflows. MPI provides the MPI_APPNUM command number to each of the processes within its context. This number, starting at 0, is the application number being executed. In a case where 3 applications are being run in MPMD mode, there would be MPI_APPNUM values of 0, 1, and 2. TeMPI Shim creates intra- and inter-communicators between each pair of MPI_APPNUM values. In the aforementioned case, application 0 would have intra- and inter-communicators to speak to itself, application 1, and application 2. This is replicated for each of the applications. Additionally, TeMPI Shim creates intra- and inter-communicators for the first MPI rank of each application to directly communicate only with each other. Finally, TeMPI Shim creates its own copy of the default world communicator, i.e., MPI_COMM_WORLD. In the case where there is only a single application, it will have the communicators to only speak with itself. TeMPI Shim is useful in this case since it is considered good practice for MPI applications to copy the default world communicator and reference this copy (see [Duplicate World]_) anyways. Ultimately, it provides value independent of the number of applications present.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Contribution of Chlorophyll Fluorescence to the Apparent Reflectance of Vegetation

Current strategies for monitoring the physiologic status of terrestrial vegetation rely on remote sensing reflectance (R) measurements, whi ch provide estimates of relative vegetation vigor based primarily on chlorophyll content. Vegetation chlorophyll fluorescence (CF) offers a non-destructive alternative and a more direct approach for diagnosis of vegetation stress before a significant reduction in chlorophyll content has occurred. Thus, monitoring of vegetation vigor based on CF may allow earlier stress detection and more accurate carbon sequestra tion estimates, than is possible using R data alone. However, the observed apparent vegetation reflectance (Ra) in reality includes contrib utions from both the reflected and fluoresced radiation. The aim of t his study is to determine the relative R and CF fractions contributing to Ra from the vegetation in the red to near-infrared region of the spectrum. The practical objectives of the study are to: 1) evaluate t he relationship between CF and R at the foliar level for corn, soybean, maple; and 2) for corn, determine if the relationship established f or healthy (optimal N) vegetation changes under N defiiency. To obtai n generally applicable results, experimental measurements were conducted on unrelated crop and tree species (maple, soybean and corn), unde r controlled conditions and a gradient of inorganic N fertilization l evels. Optical R spectra and actively induced CF emissions were obtained on the same foliar samples, in conjunction with measurements of p hotosynthetic function, pigment levels, and C and N content. The comm on spectral trends or similarities were examined. On average, 10-20% of apparent R at 685 nm was actually due to CF. The spectral trends in steady and maximum F varied significantly, with Fs (especially red) showing higher ability for species and treatment separation. The relative contribution of ChF to R varied significantly among species, with maple emitting much higher F amounts, as compared to corn and soybea n. Fs individual red and far-red bands and their ratio exhibited consistent species separations. For corn, the relative CF fraction increased in concert with the nutrient stress levels from <2% for non-stressed foliage to >7% for severely nutrient deficient plants. F685s provide d optimal treatment separation. This study confirms the trends in F68 5sE740s associated with N deficiency and vegetation stress, established usmg single narrow band excitation.

Campbell, P. K. Entcheva↗

A Notional Artemis Lunar Surface Exploration Package (ArLSEP) based on the Gandalf Staff Platform

Introduction: The Artemis program is planning to deliver crew and cargo to the lunar surface, but there is no current package for supporting lunar in-struments and experiments similar to the Apollo Lunar Surface Exploration Package (ALSEP). This abstract provides a possible concept for such a package using the Gandalf Staff Platform as a common core. Gandalf Staff: The Gandalf Staff is an early prototype system developed over FY’21/FY’22 using NASA Science Technology Mission Directorate (STMD) Center Information Fund (CIF) grants to de-sign, build and test “proof-of-concept” components. These components include a 24v battery powered monopole that powers a suite of subsystems, including a Graphical User Interface (GUI) for crew, surface voice and data communications, Lunar Search and Rescue (LunaSAR) navigation and communications, LiDAR, field site external lighting, 360-degree camera, and a geothermal instrument for measuring sub-surface temperature gradient. The staff can be carried independently by an Extra-Vehicular Activity (EVA) astronaut, or can be mounted into a tripod for “hands free” support at a surface site being investigated. The staff can be attached to an external solar array and power storage system for long-duration operations. [1,2] ALSEP: An ASLEP flew on each mission Apollo 12 to Apollo 17. For Apollo 11, a simplified packaged called the Early Apollo Scientific Experiments Pack-age (EASEP) was flown. Each package included a “Central Station” that provided the power and communications connected to a variety of instruments and sensors. The power was provided by a Radioisotope Thermoelectric Generator (RTG) fueled by Plutoni-um-238 generating 70 watts of power (initially, decayed over time) [3]. The communications system provide for direct to Earth data transfer from the lunar surface. Each pack-age was stowed externally in the Lunar Module (LM) Scientific Equipment (SEQ) bay with a mass up to 163 kg (Apollo 17). The crew unloaded the ALSEP from the LM and deployed the instruments on the lunar surface. Although designed to operate for only 1 year, many sites operated for up to 8 years successfully [4]. The Active Seismic Experiment (ASE) included 3 geophones for detecting seismic waves created by mortars and thumpers deployed by the crew. Other active experiments measured the lunar atmosphere, the heat flow in the subsurface, the lunar gravity and potential gravity waves, the lunar magnetic field, the solar wind and plasma interactions in cislunar space. Passive experiments included collectors for dust and cosmic rays, and retroreflectors for precise measurements of distance using a laser from Earth. The ALSEP program continues to generate insights into lunar formation and evolution. ArLSEP Concepts: The lunar surface science package for the Artemis program will hopefully exceed the capability of the ALSEP. There are multiple issues for discussion leading to the design of a new ArLSEP, needing requirements definition from the science community, NASA mission architecture, and NASA budget planners. 1. Delivery Mechanism Two possible projects currently provide capability to deliver scientific cargo to the lunar surface: 1) the Commercial Lunar Payload Services (CLPS) [5] and the Human Landing System (HLS) [6, 7]. Each project is controlled by a different organization within NASA and budgeted with different criteria although both support lunar exploration. The HLS system delivers crew (and potentially cargo) to human landing sites. If an ArLSEP is “predeployed” to such a site, the design must include power (either from the vehicle or independently) to keep the electronics functioning until deployed by the crew. If an ArLSEP is delivered on a vehicle after the crew is present on the lunar surface, safety protocols require adequate distance from the humans for impact from descent propelled sur-face regolith ejecta. This distance can not exceed the capability of the crew to walk (if no rover) to the vehicle for ArLSEP deployment. 2. Overall Guidelines The general design of ArLSEP will likely follow the ALSEP with a common system for communications and power; however, significant architecture differences between Apollo and Artemis exist. Power: The RTG will not be available for early Artemis missions nor likely follow-on Lunar Exploration Transportation Services (LETS) missions [8]. Thus, ArLSEP power must be supplied by solar arrays with sufficient battery capability to “keep alive” necessary electronics during any lunar surface eclipse period. Communication: The Artemis program is developing a series of communications satellites for lunar orbit to provide surface transmission of data and voice to Earth. Called “LunaNET”, this network is component useful for ArLSEP since south polar locations may not always have direct “line-of-sight” to Earth [9]. 3. Concept of Operations (ConOps) The general ConOps for ArLSEP is to deliver the package to lunar surface before the crew arrives, and then have the crew deploy the package after some period of time. This requires coordinated design (for power systems) and launch window (for schedule) on both the cargo and crew missions. Once the ArLSEP is deployed, it will operate autonomously for a number of years. It should be designed to be EVA compatible for crew maintenance and upgrade. 4. Notional Design (for discussion purpose only) The landing site near the South Pole is expected to have no eclipse cycle exceeding 5 days, so the “keep alive” power is 144 hours (6 days to include margin). A 12v ArLSEP will use rechargeable LiFePO4 cells, which are common in the Electric Vehicle (EV) industry. With a current of 5 amps and a 125 watt system, the mass is about 90kg. The comm. system and structure adds another 10kg, thus the “Central Station” is approximately 100kg. The solar power is collected on four arrays (each 2m above the surface), and the entire ArLSEP is designed to stow in a 2m x 1m x 1m volume. The experiment and instrument design will vary for each installation and add mass to the total (although they are expected to fit within the 2m3 volume). Seismic wave generation will likely not be provided with mortars, thus an electric “thumper” will be required. Active instruments such as imaging systems and sensing instruments will benefit from the additional power and communication capability provided by ArLSEP. Passive systems such as retroreflectors, witness plates, and cosmic dust collectors can be added to either the landing vehicle and/or the ArLSEP. With repeated HLS missions to the same human site, the ArLSEP can be expanded and easily maintained for long duration science collection on the lunar surface.

ALSEP↗

UAS-NAS Flight Test Series 3: Test Environment Report

The desire and ability to fly Unmanned Aircraft Systems (UAS) in the National Airspace System (NAS) is of increasing urgency. The application of unmanned aircraft to perform national security, defense, scientific, and emergency management are driving the critical need for less restrictive access by UAS to the NAS. UAS represent a new capability that will provide a variety of services in the government (public) and commercial (civil) aviation sectors. The growth of this potential industry has not yet been realized due to the lack of a common understanding of what is required to safely operate UAS in the NAS. NASA's UAS Integration in the NAS Project is conducting research in the areas of Separation Assurance/Sense and Avoid Interoperability (SSI), Human Systems Integration (HSI), and Communications (Comm), and Certification to support reducing the barriers of UAS access to the NAS. This research is broken into two research themes namely, UAS Integration and Test Infrastructure. UAS Integration focuses on airspace integration procedures and performance standards to enable UAS integration in the air transportation system, covering Detect and Avoid (DAA) performance standards, command and control performance standards, and human systems integration. The focus of Test Infrastructure is to enable development and validation of airspace integration procedures and performance standards, including integrated test and evaluation. In support of the integrated test and evaluation efforts, the Project will develop an adaptable, scalable, and schedulable relevant test environment capable of evaluating concepts and technologies for unmanned aircraft systems to safely operate in the NAS. To accomplish this task, the Project is conducting a series of human-in-the-loop (HITL) and flight test activities that integrate key concepts, technologies and/or procedures in a relevant air traffic environment. Each of the integrated events will build on the technical achievements, fidelity, and complexity of the previous tests and technical simulations, resulting in research findings that support the development of regulations governing the access of UAS into the NAS. The integrated events started with two initial flight test used to develop and test early integrations and components of the test environment. Test subjects and a relevant test environment were brought in for the integrated HITL (or IHITL) conducted in 2014. The IHITL collected data to evaluate the effectiveness of DAA Well Clear (DWC) algorithms and the acceptability of UAS concepts integrated into the NAS. The first integrated flight test (and the subject of this report) followed the IHITL by replacing the simulation components with live aircraft. The project finishes the integrated events with a final flight test to be conducted in 2016 that provides the researchers with an opportunity to collect DWC and Collision Avoidance (CA) interoperability data during flight encounters.

flight test↗