Search NASA⌕ Search

SEARCH · Search NASA

Results for “Design verification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Cluster man/system design requirements and verification

Discussion of the procedures employed for determining the man/system requirements that guided Skylab design, and review of the techniques used for implementing the man/system design verification. The foremost lesson learned from the design need anticipation and design verification experience is the necessity to allow for human capabilities of in-flight maintenance and repair. It is now known that the entire program was salvaged by a series of unplanned maintenance and repair events which were implemented in spite of poor design provisions for maintenance.

Orbital workers↗

Formal design and verification of a reliable computing platform for real-time control. Phase 1: Results

A high-level design is presented for a reliable computing platform for real-time control applications. Design tradeoffs and analyses related to the development of the fault-tolerant computing platform are discussed. The architecture is formalized and shown to satisfy a key correctness property. The reliable computing platform uses replicated processors and majority voting to achieve fault tolerance. Under the assumption of a majority of processors working in each frame, it is shown that the replicated system computes the same results as a single processor system not subject to failures. Sufficient conditions are obtained to establish that the replicated system recovers from transient faults within a bounded amount of time. Three different voting schemes are examined and proved to satisfy the bounded recovery time conditions.

Divito, Ben L.↗

A Fixed Point VHDL Component Library for a High Efficiency Reconfigurable Radio Design Methodology

Advances in Field Programmable Gate Array (FPGA) technologies enable the implementation of reconfigurable radio systems for both ground and space applications. The development of such systems challenges the current design paradigms and requires more robust design techniques to meet the increased system complexity. Among these techniques is the development of component libraries to reduce design cycle time and to improve design verification, consequently increasing the overall efficiency of the project development process while increasing design success rates and reducing engineering costs. This paper describes the reconfigurable radio component library developed at the Software Defined Radio Applications Research Center (SARC) at Goddard Space Flight Center (GSFC) Microwave and Communications Branch (Code 567). The library is a set of fixed-point VHDL components that link the Digital Signal Processing (DSP) simulation environment with the FPGA design tools. This provides a direct synthesis path based on the latest developments of the VHDL tools as proposed by the BEE VBDL 2004 which allows for the simulation and synthesis of fixed-point math operations while maintaining bit and cycle accuracy. The VHDL Fixed Point Reconfigurable Radio Component library does not require the use of the FPGA vendor specific automatic component generators and provide a generic path from high level DSP simulations implemented in Mathworks Simulink to any FPGA device. The access to the component synthesizable, source code provides full design verification capability:

Hoy, Scott D.↗

Design and verification by nonlinear simulation of a Mach/CAS control law for the NASA TCV B737 aircraft

A Mach/CAS control system using an elevator was designed and developed for use on the NASA TCV B737 aircraft to support research in profile descent procedures and approach energy management. The system was designed using linear analysis techniques primarily. The results were confirmed and the system validated at additional flight conditions using a nonlinear 737 aircraft simulation. All design requirements were satisfied.

Bruce, Kevin R.↗

Design detail verification tests for a lightly loaded open-corrugation graphite-epoxy cylinder

Flat corrugated graphite-epoxy panels were tested in compression to verify selected design details of a ring-stiffened cylinder that was designed to support an axial compressive load of 157.6 kN/m without buckling. Three different sizes of subcomponent panels, with the same basic corrugation geometry, were tested: (1) 60.96-cm-long by 45.72-cm-wide panels to evaluate the local buckling strength of the shell wall design; (2) 91.44-cm-long by 45.72-cm-wide panels to evaluate a longitudinal joint and the load-introduction method; and (3) 254.0-cm-long by 91.44-cm-wide panels with four simulated-ring stiffeners to evaluate the ring-attachment method. The test results indicate that the modified shell-wall design, the longitudinal joint, the load-introduction method, and the stiffener-attachment method for the proposed cylinder have adequate strength to support the design load.

Davis, R. C.↗

Hierarchical Design and Verification for VLSI

The specification and verification work is described in detail, and some of the problems and issues to be resolved in their application to Very Large Scale Integration VLSI systems are examined. The hierarchical design methodologies enable a system architect or design team to decompose a complex design into a formal hierarchy of levels of abstraction. The first step inprogram verification is tree formation. The next step after tree formation is the generation from the trees of the verification conditions themselves. The approach taken here is similar in spirit to the corresponding step in program verification but requires modeling of the semantics of circuit elements rather than program statements. The last step is that of proving the verification conditions using a mechanical theorem-prover.

Shostak, R. E.↗

Space Shuttle Day-of-Launch Trajectory Design and Verification

A top priority of any launch vehicle is to insert as much mass into the desired orbit as possible. This requirement must be traded against vehicle capability in terms of dynamic control, thermal constraints, and structural margins. The vehicle is certified to a specific structural envelope which will yield certain performance characteristics of mass to orbit. Some envelopes cannot be certified generically and must be checked with each mission design. The most sensitive envelopes require an assessment on the day-of-launch. To further minimize vehicle loads while maximizing vehicle performance, a day-of-launch trajectory can be designed. This design is optimized according to that day s wind and atmospheric conditions, which will increase the probability of launch. The day-of-launch trajectory verification is critical to the vehicle's safety. The Day-Of-Launch I-Load Uplink (DOLILU) is the process by which the Space Shuttle Program redesigns the vehicle steering commands to fit that day's environmental conditions and then rigorously verifies the integrated vehicle trajectory's loads, controls, and performance. The Shuttle methodology is very similar to other United States unmanned launch vehicles. By extension, this method would be similar to the methods employed for any future NASA launch vehicles. This presentation will provide an overview of the Shuttle's day-of-launch trajectory optimization and verification as an example of a more generic application of dayof- launch design and validation.

Harrington, Brian E.↗

Thermal design and verification of an instrument cooling system for infrared detectors utilizing the Oxford Stirling cycle refrigerator

A detailed nodal computer model was developed to thermally represent the hardware, and sensitivity studies were performed to evaluate design parameters and orbital environmental effects of an instrument cooling system for IR detectors. Thermal-vacuum testing showed excellent performance of the system and a correspondence with math model predictions to within 3 K. Results show cold stage temperature sensitivity to cold patch backload, outer stage external surface emittance degradation, and cold stage emittance degradation, respectively. The increase in backload on the cold patch over the mission lifetime is anticipated to be less than 3.0 watts, which translates to less than a 3-degree increase in detector temperatures.

Werrett, Stephen↗

Radar observations of orbital debris at NASA Johnson Space Center

This paper describes the original Debris Environment Characterization Radar concept and the design verification experiments developed and carried out with the purpose of establishing methods for assessing the hazards to the Space Station Freedom from radar measurements. Three design verification experiments, utilizing the Arecibo, the Goldstone, and the ALCOR radars were performed. Data obtained from RCS measurements of a representative sample of debris from ground-test hypervelocity impacts and from explosions of simulated satellites will be used to establish a relationship between the physical size of a randomly shaped debris object and its RCS.

Stansbery, E. G.↗

External tank aerothermal design criteria verification, volume 1

The objective of this study was to produce an independent set of ascent environments which would serve as a check on the Rockwell IVBC-3 environments and provide an independent reevaluation of the thermal design criteria for the External Tank (ET). Design heating rates and loads were calculated at 367 acreage body point locations. Ascent flight regimes covered were lift-off, first stage ascent, Solid Rocket Booster (SRB) staging and second stage ascent through ET separation. The purpose here is to document these results, briefly describe the methodology used and present the environments along with a comparison with the Rockwell IVBC-3 counterpart. The methodology and environment summaries are given.

Crain, William K.↗

External tank aerothermal design criteria verification, volume 2

The objective of the study was to produce an independent set of ascent environments which would serve as a check on the Rockwell International (RI) IVBC-3 environments and provide an independent reevaluation of the thermal design criteria for the External Tank (ET). Given here are the plotted timewise environments comparing REMTECH results to the RI IVBC results.

Crain, William K.↗

The Role of Integrated Modeling in the Design and Verification of the James Webb Space Telescope

The James Web Space Telescope (JWST) is a large, infrared-optimized space telescope scheduled for launch in 2011. System-level verification of critical optical performance requirements will rely on integrated modeling to a considerable degree. In turn, requirements for accuracy of the models are significant. The size of the lightweight observatory structure, coupled with the need to test at cryogenic temperatures, effectively precludes validation of the models and verification of optical performance with a single test in 1-g. Rather, a complex series of steps are planned by which the components of the end-to-end models are validated at various levels of subassembly, and the ultimate verification of optical performance is by analysis using the assembled models. This paper describes the critical optical performance requirements driving the integrated modeling activity, shows how the error budget is used to allocate and track contributions to total performance, and presents examples of integrated modeling methods and results that support the preliminary observatory design. Finally, the concepts for model validation and the role of integrated modeling in the ultimate verification of observatory are described.

Mosier, Gary E.↗

Design and verification of mechanisms for a large foldable antenna

The characteristics of the Synthetic Aperture Radar (SAR) antenna aboard the ESA Remote Sensing Satellite (ERS-1) are presented. The antenna is folded into a dense package for launch and is deployed in orbit. The design requirements and constraints, their impact on the design, and the resulting features of the mechanisms are discussed.

Luhmann, Hans Jurgen↗

Orbiter structural design and verification

The space shuttle development program provided the opportunity to challenge many of the established practices and approaches used in prior manned space flight programs. The most significant accomplishments and resulting precedents which emerged during the structural development of the space shuttle and the space shuttle orbiter are reviewed. Innovations in criteria, design solutions, and certification are highlighted, and brief comments on the lessons learned are included. Thermal stress, graphite epoxy moisture, window structure, and structural inspection are discussed under lessons learned.

Glynn, P. C.↗

Flight Rule Design, Implementation, Verification, and Validation for the Psyche Mission

NASA Jet Propulsion Lab (JPL)’s upcoming mission Psyche will begin its journey to the asteroid (16) Psyche in late 2022 in an effort to better understand its origins and, in turn, better understand our own. Operating the spacecraft safely will require the dedicated efforts of a small team that understands the spacecraft’s operational constraints, as well as a set of powerful spacecraft models designed to catch command errors that can pose risks to mission success. One of the responsibilities of the operations team is to ensure adherence to a set of Flight Rules written by spacecraft and instrument experts that are designed to mitigate these risks. Psyche’s innovations in Flight Rule design principles and advancements in the tools and processes used to implement and check Flight Rules are discussed. A comparison of Psyche’s approach to Flight Rules to other JPL missions will provide lessons learned for future missions that must perform constraint checking during operations. Flight Rule development faces several major challenges. First, flight rule developers must work with Subject Matter Experts (SME) to write the rules in a way that captures the intent of the constraint in a straightforward, enforceable manner. Second, software implementers must correctly interpret flight rules into code so that it meets the original intent of the SME. Finally, a means must be provided for SMEs to validate flight rule implementations without requiring them to understand the underlying software. Innovative processes intended to efficiently close the loop between stakeholders and software developers are described, such as the use of test-driven development to provide stakeholders with easy-to-review implementations. New guidelines for flight rule writing, designed to address these challenges, are described for future missions to adopt and build upon. Psyche Mission System has a variety of new and heritage tools that improve in the Flight Rule validation and checking process. Psyche developed a powerful, new tool called RandSEQ and made significant improvements to Octopusjam, two valuable tools that aid the development of Flight Rule unit tests. Advancements in the models and processes for performing sequence validation with SEQuence GENerator (SEQGEN), the primary, high-heritage tool used for automated flight rule checks on Psyche, are described. The development of new software and the advancements to existing software put Psyche at the forefront of Flight Rule technology. All missions must perform detailed constraint checking, so a comparison of Psyche’s approach to some of these items to the approaches taken by other missions such as Dawn, M2020, and Europa Clipper is done, specifically to examine SME-developer communication, tools used, and development process. Lessons learned from this comparison will be provided.

Weise, Tim↗