Search NASA⌕ Search

SEARCH · Search NASA

Results for “Discontinuous coefficients”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

A practical assessment of spectral accuracy for hyperbolic problems with discontinuities

Physical and transform space filtering has been applied to the Fourier spectral collocation solution of the constant coefficient scalar wave equation with a discontinuous initial condition. High order accuracy can be extracted from the unfiltered solution. Smooth, high order Fourier space filtering gives expected polynomial order solutions away from the discontinuity. Spectral accuracy is observed with the physical space filter of Gottlieb and Tadmor.

Kopriva, David A.↗

Uncertainty quantification in the presence of limited climate model data with discontinuities.

Uncertainty quantification in climate models is challenged by the prohibitive cost of a large number of model evaluations for sampling. Another feature that often prevents classical uncertainty analysis from being readily applicable is the bifurcative behavior in the climate data with respect to certain parameters. A typical example is the Meridional Overturning Circulation in the Atlantic Ocean. The maximum overturning stream function exhibits a discontinuity across a curve in the space of two uncertain parameters, namely climate sensitivity and CO2 forcing. In order to propagate uncertainties from model parameters to model output we use polynomial chaos (PC) expansions to represent the maximum overturning stream function in terms of the uncertain climate sensitivity and CO2 forcing parameters. Since the spectral methodology assumes a certain degree of smoothness, the presence of discontinuities suggests that separate PC expansions on each side of the discontinuity will lead to more accurate descriptions of the climate model output compared to global PC expansions. We propose a methodology that first finds a probabilistic description of the discontinuity given a number of data points. Assuming the discontinuity curve is a polynomial, the algorithm is based on Bayesian inference of its coefficients. Markov chain Monte Carlo sampling is used to obtain joint distributions for the polynomial coefficients, effectively parameterizing the distribution over all possible discontinuity curves. Next, we apply the Rosenblatt transformation to the irregular parameter domains on each side of the discontinuity. This transformation maps a space of uncertain parameters with specific probability distributions to a space of i.i.d standard random variables where orthogonal projections can be used to obtain PC coefficients. In particular, we use uniform random variables that are compatible with PC expansions based on Legendre polynomials. The Rosenblatt transformation and the corresponding PC expansions for the model output on either side of the discontinuity are applied successively for several realizations of the discontinuity curve. The climate model output and its associated uncertainty at specific design points is then computed by taking a quadrature-based integration average over PC expansions corresponding to possible realizations of the discontinuity curve.

54 ENVIRONMENTAL SCIENCES↗

Temperate zone sporadic-E maps /f/0/E/s/ greater than 7 MHz/

Three maps are presented of f(0) sporadic-E greater than 7 MHz for temperate zones. During map preparation it was assumed that: (1) the geographical area would be between plus and minus 60 deg geomagnetic latitude, excluding the equatorial zone, (2) the maps would be for f(0) sporadic-E greater than 7 MHz, (3) sunspot cycle variation would be ignored, (4) one map would represent the peak sporadic-E period with a discontinuity at the geographic equator, (5) one map would represent non-peak periods with a discontinuity at the geographic equator, (6) one map would represent all twelve months with no equatorial discontinuity, and (7) previously determined coefficients for median and upper decile f(0) sporadic-E would be extrapolated to 7 MHz.

Smith, E. K.↗

The effects of equal-pressure fixed slots on the characteristics of a Clark Y Airfoil

A type of fixed open slot so arranged that no flow would pass through it at a lift coefficient corresponding to high-speed flight was investigated in the N.A.C.A. 7 by 10 foot wind tunnel to determine the possibilities of such a high-lift device for increasing the speed-range ratio of a wing. The condition of no through flow was achieved by locating the slot openings at points of equal static pressure at the design lift coefficient as determined from the pressure distribution about the plain wing. Two models of Clark Y wings with such equal-pressure slots were tested and the smoke-flow patterns about them observed. The results of this investigation show that the condition of no air flow through the slot at the desired lift coefficient is attainable. The surface discontinuities produced by the slot openings have, however, such a large effect on the drag that such slots show little promise. An appreciable increase is produced in the maximum lift and the speed-range can be as high as for the plain wing.

Harris, Thomas A↗

Method for calculating lift distributions for unswept wings with flaps or ailerons by use of nonlinear section lift data

A method is presented which allows the use of nonlinear section lift data in the calculation of the spanwise lift distribution of unswept wings with flaps or ailerons. This method is based upon lifting line theory and is an extension to the method described in NACA rep. 865. The mathematical treatment of the discontinuity in absolute angle of attack at the end of the flap or aileron involves the use of a correction factor which accounts for the inability of a limited trigonometric series to represent adequately the spanwise lift distribution. A treatment of the apparent discontinuity in maximum section lift coefficient is also described. Simplified computing forms containing detailed examples are given for both symmetrical and asymmetrical lift distributions. A few comparisons of calculated characteristics with those obtained experimentally are also presented.

Sivells, James C↗

Mode coupling in partial reflections from the ionosphere at vertical incidence.

The effect of mode coupling has been calculated for radio waves partially reflected from the lower ionosphere at vertical incidence. Calculations were made for parameters appropriate to the partial reflection experiments (Belrose, 1970). The four reflection coefficients (two direct and two coupled) are calculated for a plane discontinuity using a matrix perturbation analysis. The ratios of coupled to direct reflection coefficients are calculated for a general one-dimensional reflecting layer using the coupled equations of Clemmow and Heading (1954). At the highest electron density considered, 10,000 per cu cm, about 10% of the reflected extraordinary wave amplitude might be due to coupling from the incident ordinary wave. The effect is smaller at lower electron density.

Connolly, D. J.↗

Numerical analysis of the Burgers' equation in the presence of uncertainty

The Burgers' equation with uncertain initial and boundary conditions is investigated using a polynomial chaos (PC) expansion approach where the solution is represented as a truncated series of stochastic, orthogonal polynomials. The analysis of well-posedness for the system resulting after Galerkin projection is presented and follows the pattern of the corresponding deterministic Burgers equation. The numerical discretization is based on spatial derivative operators satisfying the summation by parts property and weak boundary conditions to ensure stability. Similarly to the deterministic case, the explicit time step for the hyperbolic stochastic problem is proportional to the inverse of the largest eigenvalue of the system matrix. The time step naturally decreases compared to the deterministic case since the spectral radius of the continuous problem grows with the number of polynomial chaos coefficients. An estimate of the eigenvalues is provided. A characteristic analysis of the truncated PC system is presented and gives a qualitative description of the development of the system over time for different initial and boundary conditions. It is shown that a precise statistical characterization of the input uncertainty is required and partial information, e.g. the expected values and the variance, are not sufficient to obtain a solution. An analytical solution is derived and the coefficients of the infinite PC expansion are shown to be smooth, while the corresponding coefficients of the truncated expansion are discontinuous.

97 MATHEMATICS AND COMPUTING↗

Second-order accurate interface- and discontinuity-aware diffusion solvers in two and three dimensions

A numerical scheme is developed for two- and three-dimensional time-dependent diffusion equations in numerical simulations involving mixed cells. The focus of the development is on the formulations for both transient and steady states, the property for large time steps, second-order accuracy in both space and time, the correct treatment of the discontinuity in material properties, and the handling of mixed cells. For a mixed cell, interfaces between materials are reconstructed within the cell so that each of resulting sub-cells contains only one material and the material properties of each sub-cell are known. Diffusion equations are solved on the resulting polyhedral mesh even if the original mesh is structured. The discontinuity of material properties between different materials is correctly treated based on governing physics principles. The treatment is exact for arbitrarily strong discontinuity. The formulae for effective diffusion coefficients across interfaces between materials are derived for general polyhedral meshes. The scheme is general in two and three dimensions. Since the scheme to be developed in this paper is intended for multi-physics code with adaptive mesh refinement (AMR), we present the scheme on mesh generated from AMR. The correctness and features of the scheme are demonstrated for transient problems and steady states in one-, two-, and three-dimensional simulations for heat conduction and radiation heat transfer. The test problems involve dramatically different materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Data Comparison: Satellite and Falling Sphere Temperatures

Small meteorological rocketsondes providing temperature data have beam used for comparison with, and validation of measurements from satellite-borne instruments. A significant number of rocket-borne falling spheres were launched in conjunction with the Upper Atmosphere Research Satellite (UARS) for validation of the Halogen Occultation Experiment (HALOE), High Resolution Doppler Interferometer (HRDI), and the Microwave Limb Sounder (MLS) instruments. Upper stratosphere and mesosphere temperatures measured with these instruments on UARS are compared with inflatable spheres launched from Wallops Island (1992-1999), Brazil (1994), Hawaii (1992), Norway (1992), and Sweden (1993 and 1996). Time and space differences varied between the satellite measurement and the rocketsonde launch, for example HALOE overpasses occurred within 5 days and in some cases there were spatial differences of up to 30 degrees longitude. Validation measurements of the HRDI instrument occurred at Wallops Island when it passed within 20 minutes and 330 kilometers of the launch site. Because of discontinuity in the falling sphere drag coefficients when fall speed neared MACH 1 falling sphere temperatures near 70 kilometers attitude are biased toward lower temperatures. Availability of improved software and a new atmospheric model have helped to reduce this bias. The validated remote instrument measurements permit a new perspective of atmospheric structure to be formed, not always possible with the limited number of falling sphere measurements. Features of the remote measurement temperature profiles and their possible use to extend the climatological data base at the rocketsonde sites will be discussed.

Schmidlin, Francis J.↗

The particle distributions of asymmetric kinetic electrostatic structures

We give the energy distributions of electrons and ions supporting a steady state electrostatic structure in a collisionless plasma. The electric potential of the structure is skew asymmetrically distributed in space. We show that the jump discontinuous, logarithmically singular electron and ion distributions may be reduced to elliptic integrals. We give the coefficients of the logarithmic terms and the jumps at the discontinuities and we show that they are reciprocally proportional. We calculate bounds for the potential skew asymmetry and show that these bounds are regulated by the boundary conditions of the particle distributions. Despite singularities, our treatment reproduces a smooth space distribution of the potential amplitude and electron and ion distributions that are smooth at one of the boundaries of the electrostatic structure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Exploring a possible origin of the QCD critical endpoint

We develop a new model of the QCD critical endpoint by matching the deconfinement phase transition line of quark-gluon bags with the similar line at which the bag surface tension coefficient vanishes. Unlike all previous studies of such models the deconfined phase in our approach is defined not by an essential singularity of the isobaric partition function but its simple pole. As an unexpected result we find out that the first-order phase transition which is usually defined by a discontinuity of the first derivative of the bag system pressure results from a discontinuity of the derivative of surface tension coefficient of quark-gluon bags.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An Investigation of the Effects of Volume Fraction on Drag Coefficient of Non-Spherical Particles Using PR-DNS

Prediction of the drag coefficient is required in gas-particle multiphase flow modeling and simulation. Experimental data and correlations on the fixed-bed system of spherical particles with high volume fractions for various possible arrangements are available in the literature. However, the effect of volume fraction on the drag coefficient of non-spherical particles is not well studied. In solving the momentum equation, the volume fraction plays a vital role in determining the flow resistances. In this paper, we study the impact of volume fraction in the range of 0.069 to 0.65 on the drag coefficient using the computational fluid dynamics (CFD) simulation of air for Reynold number in the range of 10 to 10000 using particle resolved direct numerical solution (PR-DNS). Regular non-spherical particles such as a cube, tetrahedron, and spheroids are used in this study since their single particle’s drag coefficient data are available in the literature for comparison. For this work, the simulations are carried out in the Ansys Fluent using polyhedral mesh, which consumes significantly less computational time and power. The study showed the sphericity and volume fraction have significant impact on the bed pressure drop and average drag coefficient of the particles in the bed especially in high Reynolds number regime. The bed of the spheroid experiences the lowest drag being the most streamlined particle, and the particles with the edges result in a large drag coefficient due to flow separation at the discontinuity. The vector plots verify this behavior where large wake regions are observed behind the tetrahedron particle.

Mahyawansi, Pratik↗

IMPORTANCE OF FULL COULOMB INTERACTIONS FOR UNDERSTANDING THE ELECTRONIC STRUCTURE OF DELTA-Pu

The solid-state properties of most elements are now well understood on the basis of quantum physics - with few exceptions, notably the element number 94, plutonium. Plutonium has six crystalline phases at ambient pressure, some of which are separated by unusual phase transitions with large discontinuities in volume, exhibit negative thermal expansion coefficients, or form exotic low-symmetry structures. The main challenge to explain these anomalous properties is that the characteristic ingredient of actinides, the 5f electronic states, are in the cross-over regime between the localized and delocalized (itinerant) behaviour in Pu. The early part of the actinide series with the 5f states being itinerant, i.e. part of the metallic bond, culminates with Pu; starting with Am (Z = 95), the 5f states are localized, nonbonding, and resemble the 4f states in lanthanides. Both itinerant and localized regimes are well covered by existing theories, but they cannot be simply interpolated due to the importance of dynamical electron-electron correlations. Here we present accurate quantum Monte Carlo calculations achieving previously inaccessible resolution. Obtained results demonstrate that interplay of the full Coulomb interaction vertex with spin-orbital coupling is crucial for understanding the experimentally observed spectral properties of plutonium near the Fermi level.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasma field characteristics of directional discontinuities in the interplanetary medium

The paper examines plasma and magnetic-field changes occurring across 1359 directional discontinuities taken from interplanetary data spanning almost four solar rotations. The plasma field characteristics of these events exhibit a distinct variation with large-scale solar-wind velocity. At low velocities, tangential discontinuities appear to predominate. At higher velocities, a substantial and increasing fraction of directional discontinuities exhibits the plasma field properties expected of outwardly propagating rotational discontinuities. The results of Sari (1972, 1975) and of the present study suggest that in the calculation of propagation diffusion coefficients for low-energy cosmic rays, the effects of directional discontinuities should be subtracted from the magnetic fluctuation spectrum during relatively quiet wind conditions. It is not clear that such subtraction is necessary during more disturbed periods.

Solodyna, C. V.↗

Simulating diffusion processes in discontinuous media: A numerical scheme with constant time steps

In this article, we propose new Monte Carlo techniques for moving a diffusive particle in a discontinuous media. In this framework, we characterize the stochastic process that governs the positions of the particle. The key tool is the reduction of the process to a Skew Brownian motion (SBM). In a zone where the coefficients are locally constant on each side of the discontinuity, the new position of the particle after a constant time step is sampled from the exact distribution of the SBM process at the considered time. To do so, we propose two different but equivalent algorithms: a two-steps simulation with a stop at the discontinuity and a one-step direct simulation of the SBM dynamic. Some benchmark tests illustrate their effectiveness.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A generalized machine learning workflow to visualize mechanical discontinuity

Accurate detection and mapping of mechanical discontinuity in materials has widespread industrial and research applications. Herein, we developed a generalized machine-learning framework for visualizing single mechanical discontinuity embedded in material of any composition, velocity, density, porosity, and size with limited data. The proposed visualization of discontinuity requires accurate estimations of the length, location, and orientation of the embedded discontinuity by processing multipoint wave-transmission measurements. k-Wave simulator is used to create a large dataset of elastic waveforms recorded during multi-point wave-transmission measurements through materials containing single mechanical discontinuity. k-Wave simulator considers the wave attenuation, dispersion, and mode conversion in wave motion. Discrete wavelet transform (DWT) and statistical feature extraction are essential for data preprocessing prior to the data-driven model development. DWT also minimizes the effect of noise. Using hyper-parameter tuning and cross validation, gradient boosting regression can visualize the mechanical discontinuity with an accuracy of 0.85, in terms of coefficient of determination. A double-layered neural network-based regression has better performance with an accuracy of 0.95. Use of convolutional neural network converts the predictive task from a waveform processing to an image processing problem. Convolutional neural network achieved a generalization performance of 0.91. The proposed generalized workflow requires robust simulation of wave propagation, signal processing, feature engineering, and model evaluation. Sensors closest to the source and those located opposite the source are the most significant for the desired visualization. Notably, the sensors closest to the source capture the non-linear associations, whereas the sensor on the border opposite to the source capture the linear associations between the measured waveforms and the properties of the mechanical discontinuity.

42 ENGINEERING↗

Calculation fo the Reflection and Transmission Coefficients for Gradual Tapered Waveguide Structures

It is required to find the reflection and transmission coefficients for a tapered waveguide. It is assumed that the taper is very long and gradual such that no higher order modes are excited from the discontinuity of the waveguide. Three different methods are presented for finding the reflection coefficient and two methods are presented for finding the transmission coefficient. A traditional differential equation method which finds only the reflection coefficient is presented. An additional set of differential equations are presented which finds both the reflection and transmission coefficients. A FEM (finite element method), which solves for both the reflection and transmission coefficients, is presented with its limitations. An example of a tapered coaxial line and waveguide is presented with the different methods compared and contrasted.

43 PARTICLE ACCELERATORS↗