Search NASA⌕ Search

SEARCH · Search NASA

Results for “Distribution Grid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Grid sensitivity for aerodynamic optimization and flow analysis

After reviewing relevant literature, it is apparent that one aspect of aerodynamic sensitivity analysis, namely grid sensitivity, has not been investigated extensively. The grid sensitivity algorithms in most of these studies are based on structural design models. Such models, although sufficient for preliminary or conceptional design, are not acceptable for detailed design analysis. Careless grid sensitivity evaluations, would introduce gradient errors within the sensitivity module, therefore, infecting the overall optimization process. Development of an efficient and reliable grid sensitivity module with special emphasis on aerodynamic applications appear essential. The organization of this study is as follows. The physical and geometric representations of a typical model are derived in chapter 2. The grid generation algorithm and boundary grid distribution are developed in chapter 3. Chapter 4 discusses the theoretical formulation and aerodynamic sensitivity equation. The method of solution is provided in chapter 5. The results are presented and discussed in chapter 6. Finally, some concluding remarks are provided in chapter 7.

Sadrehaghighi, I.↗
NASA NTRS1992

A numerical study of three-dimensional surface tension driven convection with fre surface deformation

The steady three-dimensional thermocapillary motion with a deformable free surface is studied numerically in both normal and zero gravity environments. Flow configurations consist of a square cavity heated from the side. In the analysis, the free surface is allowed to deform and the grid distribution is adapted to the surface deformation. The divergence-free condition is satisfied by using a dual time-stepping approach in the numerical scheme. Convective flux derivatives are evaluated using a third-order accurate upwind-biased flux-split differencing technique. The numerical solutions at the midplane of the square cavity are compared with the results from two-dimensional calculations. In addition, numerial results for cases under zero and normal gravity conditions are compared. Significantly different flow structures and surface deformation have been observed. The comparison of calculated results will be compared with experimental data in the updated version of this paper.

Hsieh, Kwang-Chung↗
NASA NTRS2003

Living with a Star: New Opportunities in Sun-Climate Research

Living With a Star is a NASA initiative employing the combination of dedicated spacecraft with targeted research and modeling efforts to improve what we know of solar effects of all kinds on the Earth and its surrounding space environment, with particular emphasis on those that have significant practical impacts on life and society. The highest priority among these concerns is the subject of this report: the potential effects of solar variability on regional and global climate, including the extent to which solar variability has contributed to the well-documented warming of the Earth in the last 100 years. Understanding how the climate system reacts to external forcing from the Sun will also greatly improve our knowledge of how climate will respond to other climate drivers, including those of anthropogenic origin. A parallel element of the LWS program addresses solar effects on space weather : the impulsive emissions of charged particles, short-wave electromagnetic radiation and magnetic disturbances in the upper atmosphere and near-Earth environment that also affect life and society. These include a wide variety of solar impacts on aeronautics, astronautics, electric power transmission, and national defense. Specific examples are (1) the impacts of potentially- damaging high energy radiation and atomic particles of solar origin on satellites and satellite operations, spacecraft electronics systems and components, electronic communications, electric power distribution grids, navigational and GPS systems, and high altitude aircraft; and (2) the threat of sporadic, high-energy solar radiation to astronauts and high altitude aircraft passengers and crews. Elements of the LWS program include an array of dedicated spacecraft in near- Earth and near-Sun orbits that will closely study and observe both the Sun itself and the impacts of its variations on the Earth's radiation belts and magnetosphere, the upper atmosphere, and ionosphere. These spacecraft, positioned to study and monitor changing conditions in the Sun-Earth neighborhood, will also serve as sentinels of solar storms and impulsive events.

Source record↗
NASA NTRS2007

Modeling of Compressible Flow with Friction and Heat Transfer Using the Generalized Fluid System Simulation Program (GFSSP)

The present paper describes the verification and validation of a quasi one-dimensional pressure based finite volume algorithm, implemented in Generalized Fluid System Simulation Program (GFSSP), for predicting compressible flow with friction, heat transfer and area change. The numerical predictions were compared with two classical solutions of compressible flow, i.e. Fanno and Rayleigh flow. Fanno flow provides an analytical solution of compressible flow in a long slender pipe where incoming subsonic flow can be choked due to friction. On the other hand, Raleigh flow provides analytical solution of frictionless compressible flow with heat transfer where incoming subsonic flow can be choked at the outlet boundary with heat addition to the control volume. Nonuniform grid distribution improves the accuracy of numerical prediction. A benchmark numerical solution of compressible flow in a converging-diverging nozzle with friction and heat transfer has been developed to verify GFSSP's numerical predictions. The numerical predictions compare favorably in all cases.

Bandyopadhyay, Alak↗
NASA NTRS2014

Cart3D Simulations for the First AIAA Sonic Boom Prediction Workshop

Simulation results for the First AIAA Sonic Boom Prediction Workshop (LBW1) are presented using an inviscid, embedded-boundary Cartesian mesh method. The method employs adjoint-based error estimation and adaptive meshing to automatically determine resolution requirements of the computational domain. Results are presented for both mandatory and optional test cases. These include an axisymmetric body of revolution, a 69deg delta wing model and a complete model of the Lockheed N+2 supersonic tri-jet with V-tail and flow through nacelles. In addition to formal mesh refinement studies and examination of the adjoint-based error estimates, mesh convergence is assessed by presenting simulation results for meshes at several resolutions which are comparable in size to the unstructured grids distributed by the workshop organizers. Data provided includes both the pressure signals required by the workshop and information on code performance in both memory and processing time. Various enhanced techniques offering improved simulation efficiency will be demonstrated and discussed.

Predictions↗
NASA NTRS2018

Connecting Satellite-Based Precipitation Estimates to Users

Beginning in 1997, the Merged Precipitation Group at NASA Goddard has distributed gridded global precipitation products built by combining satellite and surface gauge data. This started with the Global Precipitation Climatology Project (GPCP), then the Tropical Rainfall Measuring Mission (TRMM) Multi-satellite Precipitation Analysis (TMPA), and recently the Integrated Multi-satellitE Retrievals for the Global Precipitation Measurement (GPM) mission (IMERG). This 20+-year (and on-going) activity has yielded an important set of insights and lessons learned for making state-of-the-art precipitation data accessible to the diverse communities of users. Merged-data products critically depend on the input sensors and the retrieval algorithms providing accurate, reliable estimates, but it is also important to provide ancillary information that helps users determine suitability for their application. We typically provide fields of estimated random error, and recently reintroduced the quality index concept at user request. Also at user request we have added a (diagnostic) field of estimated precipitation phase. Over time, increasingly more ancillary fields have been introduced for intermediate products that give expert users insight into the detailed performance of the combination algorithm, such as individual merged microwave and microwave-calibrated infrared estimates, the contributing microwave sensor types, and the relative influence of the infrared estimate.

Huffman, George J.↗
NASA NTRSDate not supplied

Recent Progress on Rans-Based Transition Model Verification

The current efforts to assess and improve the Reynolds-averaged Navier-Stokes (RANS)-coupled transition models in the NASA FUN3D and OVERFLOW codes are summarized in this study. The first AIAA Transition Modeling Workshop and the NATO AVT-313 Transition Workshop both emphasized the need for code verification for transport equations based transition models as a top priority. We discuss the methods used for the model verification, the resulting grid families, the flow solutions, and other supporting information collected with at least two established NASA flow solvers, namely, FUN3D and OVERFLOW. These results, which will be uploaded onto the NASA Turbulence Modeling Resource, should assist other members of the computational fluid dynamics (CFD) community in verifying their own implementations of various transition models, such as the Langtry-Menter (LM2009) model, the one-equation γ model, and Coder’s amplification factor transport (AFT) model. Grid convergence is assessed using both global and local flow metrics of interest such as lift and drag as well as local skin-friction coefficients. We also explore the anisotropic unstructured metric-based adaptive mesh refinement library known as refine with the NASA FUN3D solver to determine if this capability can achieve the same accuracy as handcrafted structured grids with a significantly smaller node count and to learn the characteristics of the resulting grid distribution, especially in the vicinity of the transition zone.

Transition↗
NASA NTRSDate not supplied

Recent Progress on RANS-Based Transition Model Verification

The current efforts to assess and improve the Reynolds-averaged Navier-Stokes (RANS)-coupled transition models in the NASA FUN3D and OVERFLOW codes are summarized in this study. The first AIAA Transition Modeling Workshop and the NATO AVT-313 Transition Workshop both emphasized the need for code verification for transport equations based transition models as a top priority. We discuss the methods used for the model verification, the resulting grid families, the flow solutions, and other supporting information collected with at least two established NASA flow solvers, namely, FUN3D and OVERFLOW. These results, which will be uploaded onto the NASA Turbulence Modeling Resource, should assist other members of the computational fluid dynamics (CFD) community in verifying their own implementations of various transition models, such as the Langtry-Menter (LM2009) model, the one-equation γ model, and Coder’s amplification factor transport (AFT) model. Grid convergence is assessed using both global and local flow metrics of interest such as lift and drag as well as local skin-friction coefficients. We also explore the anisotropic unstructured metric-based adaptive mesh refinement library known as refine with the NASA FUN3D solver to determine if this capability can achieve the same accuracy as handcrafted structured grids with a significantly smaller node count and to learn the characteristics of the resulting grid distribution, especially in the vicinity of the transition zone.

RANS↗
NASA NTRS2016

Regional and Local Variations in Atmospheric Aerosols Using Ground-Based Sun Photometry During Distributed Regional Aerosol Gridded Observation Networks (DRAGON) in 2012

Aerosol mass concentrations are affected by local emissions as well as long-range transboundary (LRT) aerosols. This work investigates regional and local variations of aerosols based on Distributed Regional Aerosol Gridded Observation Networks (DRAGON).We constructed DRAGON-Japan and DRAGON-Osaka in spring of 2012. The former network covers almost all of Japan in order to obtain aerosol information in regional scale over Japanese islands. It was determined from the DRAGON-Japan campaign that the values of aerosol optical thickness (AOT) decrease from west to east during an aerosol episode. In fact, the highest AOT was recorded at Fukue Island at the western end of the network, and the value was much higher than that of urban areas. The latter network (DRAGON-Osaka) was set as a dense instrument network in the megalopolis of Osaka, with a population of 12 million, to better understand local aerosol dynamics in urban areas. AOT was further measured with a mobile sun photometer attached to a car. This transect information showed that aerosol concentrations rapidly changed in time and space together when most of the Osaka area was covered with moderate LRT aerosols. The combined use of the dense instrument network (DRAGON-Osaka) and high-frequency measurements provides the motion of aerosol advection, which coincides with the wind vector around the layer between 700 and 850 hPa as provided by the reanalysis data of the National Centers for Environmental Prediction (NCEP).

Sano, Itaru↗
NASA NTRS1994

Overset grid applications on distributed memory MIMD computers

Analysis of modern aerospace vehicles requires the computation of flowfields about complex three dimensional geometries composed of regions with varying spatial resolution requirements. Overset grid methods allow the use of proven structured grid flow solvers to address the twin issues of geometrical complexity and the resolution variation by decomposing the complex physical domain into a collection of overlapping subdomains. This flexibility is accompanied by the need for irregular intergrid boundary communication among the overlapping component grids. This study investigates a strategy for implementing such a static overset grid implicit flow solver on distributed memory, MIMD computers; i.e., the 128 node Intel iPSC/860 and the 208 node Intel Paragon. Performance data for two composite grid configurations characteristic of those encountered in present day aerodynamic analysis are also presented.

Chawla, Kalpana↗
NASA NTRS1993

Dynamic overset grid communication on distributed memory parallel processors

A parallel distributed memory implementation of intergrid communication for dynamic overset grids is presented. Included are discussions of various options considered during development. Results are presented comparing an Intel iPSC/860 to a single processor Cray Y-MP. Results for grids in relative motion show the iPSC/860 implementation to be faster than the Cray implementation.

Barszcz, Eric↗
NASA NTRS2001

NASA's Information Power Grid: Large Scale Distributed Computing and Data Management

Large-scale science and engineering are done through the interaction of people, heterogeneous computing resources, information systems, and instruments, all of which are geographically and organizationally dispersed. The overall motivation for Grids is to facilitate the routine interactions of these resources in order to support large-scale science and engineering. Multi-disciplinary simulations provide a good example of a class of applications that are very likely to require aggregation of widely distributed computing, data, and intellectual resources. Such simulations - e.g. whole system aircraft simulation and whole system living cell simulation - require integrating applications and data that are developed by different teams of researchers frequently in different locations. The research team's are the only ones that have the expertise to maintain and improve the simulation code and/or the body of experimental data that drives the simulations. This results in an inherently distributed computing and data management environment.

Johnston, William E.↗
NASA NTRS2002

The Computing and Data Grid Approach: Infrastructure for Distributed Science Applications

With the advent of Grids - infrastructure for using and managing widely distributed computing and data resources in the science environment - there is now an opportunity to provide a standard, large-scale, computing, data, instrument, and collaboration environment for science that spans many different projects and provides the required infrastructure and services in a relatively uniform and supportable way. Grid technology has evolved over the past several years to provide the services and infrastructure needed for building 'virtual' systems and organizations. We argue that Grid technology provides an excellent basis for the creation of the integrated environments that can combine the resources needed to support the large- scale science projects located at multiple laboratories and universities. We present some science case studies that indicate that a paradigm shift in the process of science will come about as a result of Grids providing transparent and secure access to advanced and integrated information and technologies infrastructure: powerful computing systems, large-scale data archives, scientific instruments, and collaboration tools. These changes will be in the form of services that can be integrated with the user's work environment, and that enable uniform and highly capable access to these computers, data, and instruments, regardless of the location or exact nature of these resources. These services will integrate transient-use resources like computing systems, scientific instruments, and data caches (e.g., as they are needed to perform a simulation or analyze data from a single experiment); persistent-use resources. such as databases, data catalogues, and archives, and; collaborators, whose involvement will continue for the lifetime of a project or longer. While we largely address large-scale science in this paper, Grids, particularly when combined with Web Services, will address a broad spectrum of science scenarios. both large and small scale.

Johnston, William E.↗
NASA NTRS1994

Parallel grid generation algorithm for distributed memory computers

A parallel grid-generation algorithm and its implementation on the Intel iPSC/860 computer are described. The grid-generation scheme is based on an algebraic formulation of homotopic relations. Methods for utilizing the inherent parallelism of the grid-generation scheme are described, and implementation of multiple levELs of parallelism on multiple instruction multiple data machines are indicated. The algorithm is capable of providing near orthogonality and spacing control at solid boundaries while requiring minimal interprocessor communications. Results obtained on the Intel hypercube for a blended wing-body configuration are used to demonstrate the effectiveness of the algorithm. Fortran implementations bAsed on the native programming model of the iPSC/860 computer and the Express system of software tools are reported. Computational gains in execution time speed-up ratios are given.

Moitra, Stuti↗
NASA NTRS1991

Transformation of two and three-dimensional regions by elliptic systems

A reliable linear system is presented for grid generation in 2-D and 3-D. The method is robust in the sense that convergence is guaranteed but is not as reliable as other nonlinear elliptic methods in generating nonfolding grids. The construction of nonfolding grids depends on having reasonable approximations of cell aspect ratios and an appropriate distribution of grid points on the boundary of the region. Some guidelines are included on approximating the aspect ratios, but little help is offered on setting up the boundary grid other than to say that in 2-D the boundary correspondence should be close to that generated by a conformal mapping. It is assumed that the functions which control the grid distribution depend only on the computational variables and not on the physical variables. Whether this is actually the case depends on how the grid is constructed. In a dynamic adaptive procedure where the grid is constructed in the process of solving a fluid flow problem, the grid is usually updated at fixed iteration counts using the current value of the control function. Since the control function is not being updated during the iteration of the grid equations, the grid construction is a linear procedure. However, in the case of a static adaptive procedure where a trial solution is computed and used to construct an adaptive grid, the control functions may be recomputed at every step of the grid iteration.

Mastin, C. Wayne↗
NASA NTRS2024

Capsule_Grid User Guide

Software utility CAPSULE_GRID and several related procedures that automate grid generation for computational fluid dynamics calculations about axisymmetric atmospheric entry vehicles are described as a supplement to the documentation within the source codes. This application program and its ancillary software utilities are all in the public domain at the web site https://software.nasa.gov/software/category/all/arc/1/cfdtools with the exception of the 2D hyperbolic volume gridding step for which scripts driving either GRIDGEN1 or HYPGEN2 are available. CAPSULE_GRID was developed at NASA Ames Research Center in support of the DPLR3 real gas flow solver. Both forebodies (only) and full bodies are treated, for axisymmetric 2D flow calculations or for 3D calculations at angle of attack. The expected application is to the smooth outer mold line of a hypersonic atmospheric entry vehicle, for which a single layer of point-matched structured grid blocks normally suffices. Control files for a variety of representative cases are included with illustrations of results, and some insights into the subtleties of curvature-based grid point distribution are provided. Gridding of a capsule on a sting is supported. Additional procedures for treating arbitrarily long 2D wakes, prompted by asteroid studies and relevant to spacecraft such as Stardust, are also documented. Most recently, treating an asymmetric forebody (including an off-center nose, with or without an aft body) has been incorporated as an extra step.

spacecraft↗
NASA NTRS1988

Three-dimensional elliptic grid generation technique with application to turbomachinery cascades

Described is a numerical method for generating 3-D grids for turbomachinery computational fluid dynamic codes. The basic method is general and involves the solution of a quasi-linear elliptic partial differential equation via pointwise relaxation with a local relaxation factor. It allows specification of the grid point distribution on the boundary surfaces, the grid spacing off the boundary surfaces, and the grid orthogonality at the boundary surfaces. A geometry preprocessor constructs the grid point distributions on the boundary surfaces for general turbomachinery cascades. Representative results are shown for a C-grid and an H-grid for a turbine rotor. Two appendices serve as user's manuals for the basic solver and the geometry preprocessor.

Chen, S. C.↗
NASA NTRS1992

TIGGERC: Turbomachinery interactive grid generator energy distributor and restart code

A two dimensional multi-block grid generator was developed for a new design and analysis system for studying multi-blade row turbomachinery problems with an axisymmetric viscous/inviscid 'average passage' through flow code. TIGGERC is a mouse driven, fully interactive grid generation program which can be used to modify boundary coordinates and grid packing. TIGGERC generates grids using a hyperbolic tangent or algebraic distribution of grid points on the block boundaries and the interior points of each block grid are distributed using a transfinite interpolation approach. TIGGERC generates a blocked axisymmetric H grid, C grid, I grid, or O grid for studying turbomachinery flow problems. TIGGERC was developed for operation on small high speed graphic workstations.

Miller, David P.↗