Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic Density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Dynamics of distribution and density of phreatophytes and other arid-land plant communities

The author has identified the following significant results. Six ERTS-1 images of the Tucson area, Arizona were analyzed to detect seasonal flushes of plant growth. Paired MSS-6 and MSS-5 bulk images were analyzed, using a ratioing technique, on the Electronic Satellite Image Analysis Console at Stanford Research Institute. Because of unique phenology, desert areas, covered only briefly by dense growths of ephemeral plants, are readily discerned. Grassland, evergreen forest, and riparian communities are also uniquely defined by their phenologies. Relatively sterile areas with little or no plant growth are easily discerned as are areas with varying degrees of plant productivity. The ratioing procedure detects plant coverage in excess of a threshold lying between 25% and 50%. The method is flexible and other coverage thresholds can be used.

Turner, R. M.↗
NASA NTRS2017

High-Latitude Thermosphere Neutral Density Response to Solar Wind Dynamic Pressure Enhancement

We examine the response of the thermosphere to the impact of solar wind dynamic pressure enhancements using observations and global magneto-hydrodynamics (MHD) simulations by the OpenGGCM model. Combining neutral density observations from the Challenging Minisatellite Payload (CHAMP) and the Gravity Recovery and Climate Experiment (GRACE) satellites with simultaneous Poynting flux measurements from the Defense Meteorological Satellite Program (DMSP) F16, we find that thermospheric density as well as downward Poynting flux intensified shortly after a sudden enhancement of the solar wind dynamic pressure. The intensification manifested mostly on the dayside high-latitude region with peak intensity in the vicinity of the noon and prenoon cusp. OpenGGCM modeling results show that the ionospheric Joule heating increased abruptly in response to the sudden enhancement of the dynamic pressure in the same region as the observed Poynting flux and neutral density enhancements. The modeling results show that the enhanced Joule heating coincides, both in time and location, with the appearance of a pair of high-latitude localized field-aligned currents (FACs) in the cusp region. The FACs intensified and extended azimuthally. Coincidental with the solar wind dynamic pressure enhancement, the y component of the interplanetary magnetic field (IMF) By became strongly positive and, in addition, had some large fluctuations. We explore the separate and combined effects of the dynamic pressure and IMF By perturbations, with specifically designed simulation experiments that isolate the effect of each solar wind parameter. We find that the dynamic pressure enhancement is the primary source for the Joule heating and neutral density enhancements, but the IMF By modulates the level of enhancement.

magneto-hydrodynamics↗
NASA NTRS2015

Verification and Validation Testing of the Parachute Decelerator System Prior to the First Supersonic Flight Dynamics Test for the Low Density Supersonic Decelerator Program

The Parachute Decelerator System (PDS) is comprised of all components associated with the supersonic parachute and its associated deployment. During the Supersonic Flight Dynamics Test (SFDT), for the Low Density Supersonic Decelerators Program, the PDS was required to deploy the supersonic parachute in a defined fashion. The PDS hardware includes three major subsystems that must function together. The first subsystem is the Parachute Deployment Device (PDD), which acts as a modified pilot deployment system. It is comprised of a pyrotechnic mortar, a Kevlar ballute, a lanyard actuated pyrotechnic inflation aid, and rigging with its associated thermal protection material (TPS). The second subsystem is the supersonic parachute deployment hardware. This includes all of the parachute specific rigging that includes the parachute stowage can and the rigging including TPS and bridle stiffeners for bridle management during deployment. The third subsystem is the Supersonic Parachute itself, which includes the main parachute and deployment bags. This paper summarizes the verification and validation of the deployment process, from the initialization of the PDS system through parachute bag strip that was done prior to the first SFDT.

Gallon, John C.↗
NASA NTRS1984

Numerical and experimental studies of particle flow in a high-pressure boundary-layer wind tunnel

The approach was to simulate the surface environment of Venus as closely as practicable and to conduct experiments to determine threshold wind speeds, particle flux, particle velocities, and the characteristics of various aeolian bedforms. The Venus Wind Tunnel (VWT) is described and the experimental procedures that were developed to make the high-pressure wind tunnel measurements are presented. In terrestrial simulations of aeolian activity, it is possible to conduct experiments under pressures and temperatures found in natural environments. Because of the high pressures and temperatures, Venusian simulations are difficult to achieve in this regard. Consequently, extrapolation of results to Venue potentially involves unknown factors. The experimental rationale was developed in the following way: The VWT enables the density of the Venusian atmosphere to be reproduced. Density is the principal atmospheric property for governing saltation threshold, particle flux, and the ballistics of airborne particles (equivalent density maintains dynamic similarity of gas flow). When operated at or near Earth's ambient temperature, VWT achieves Venusian atmospheric density at pressures of about 30 bar, or about one third less than those on Venus, although still maintaining dynamic similarity to Venus.

White, B. R.↗
NASA NTRS1982

The satellites of Uranus

Observations and the probable natures of the five known satellites of Uranus are reviewed. Photographic, photoelectric and CCD photometry of the satellites since 1961, although in agreement within experimental error, is not as mutually consistent as may be expected, and broadband JHK photometry falls in a portion of the J-H, H-K color diagram difficult to interpret. Spectrophotometry in the range 0.3-1.1 microns taken on two separate occasions is inconsistent, with only the relatively neutral reflectances of Titania and Oberon regarded as well established. Near-infrared spectrophotometry has revealed the presence of water ice or frost on the satellite surfaces, possibly in a very pure state, with spectra most similar to Ganymede. Estimations of the properties of the satellites from their surface geometric albedos, assumed mean densities and dynamics yield radii in the range 160-520 km, albedos on the order of 0.5 and densities of about 1.3 g/cu cm, similar to the icy Saturn satellites. The satellites are also believed to have formed after the event that caused the planet to tilt to its present obliquity.

Cruikshank, D. P.↗
NASA NTRS2015

Aerodynamic Models for the Low Density Supersonic Declerator (LDSD) Supersonic Flight Dynamics Test (SFDT)

An overview of pre-flight aerodynamic models for the Low Density Supersonic Decelerator (LDSD) Supersonic Flight Dynamics Test (SFDT) campaign is presented, with comparisons to reconstructed flight data and discussion of model updates. The SFDT campaign objective is to test Supersonic Inflatable Aerodynamic Decelerator (SIAD) and large supersonic parachute technologies at high altitude Earth conditions relevant to entry, descent, and landing (EDL) at Mars. Nominal SIAD test conditions are attained by lifting a test vehicle (TV) to 36 km altitude with a large helium balloon, then accelerating the TV to Mach 4 and and 53 km altitude with a solid rocket motor. The first flight test (SFDT-1) delivered a 6 meter diameter robotic mission class decelerator (SIAD-R) to several seconds of flight on June 28, 2014, and was successful in demonstrating the SFDT flight system concept and SIAD-R. The trajectory was off-nominal, however, lofting to over 8 km higher than predicted in flight simulations. Comparisons between reconstructed flight data and aerodynamic models show that SIAD-R aerodynamic performance was in good agreement with pre-flight predictions. Similar comparisons of powered ascent phase aerodynamics show that the pre-flight model overpredicted TV pitch stability, leading to underprediction of trajectory peak altitude. Comparisons between pre-flight aerodynamic models and reconstructed flight data are shown, and changes to aerodynamic models using improved fidelity and knowledge gained from SFDT-1 are discussed.

Van Norman, John W.↗
NASA NTRS1971

The estimation of the constituent densities of the upper atmosphere by means of a recursive filtering algorithm.

The structure of the upper atmosphere can be indirectly probed by light in order to determine the global density structure of ozone, aerosols, and neutral atmosphere. Scattered and directly transmitted light is measured by a satellite and is shown to be a nonlinear function of the state which is defined to be a point-wise decomposition of the density profiles. Dynamics are imposed on the state vector and a structured estimation problem is developed. The estimation of these densities is then performed using a linearized Kalman-Bucy filter and a linearized Kushner-Stratonovich filter.

Mcgarty, T. P.↗
NASA NTRS1975

Effect of weightlessness on mineral saturation of bone tissue

X-ray photometry of bone density established dynamic changes in mineral saturation of bone tissues for Soyuz spacecraft and Salyut orbital station crews. Calcaneus optical bone densities in all crew members fell below initial values; an increase in spacecrew exposure time to weightlessness conditions also increased the degree of decalcification. Demineralization under weightlessness conditions took place at a higher rate than under hypodynamia.

Krasnykh, I. G.↗
NASA NTRS1993

Performance of ceramic superconductors in magnetic bearings

Magnetic bearings are large-scale applications of magnet technology, quite similar in certain ways to synchronous machinery. They require substantial flux density over relatively large volumes of space. Large flux density is required to have satisfactory force density. Satisfactory dynamic response requires that magnetic circuit permeances not be too large, implying large air gaps. Superconductors, which offer large magnetomotive forces and high flux density in low permeance circuits, appear to be desirable in these situations. Flux densities substantially in excess of those possible with iron can be produced, and no ferromagnetic material is required. Thus the inductance of active coils can be made low, indicating good dynamic response of the bearing system. The principal difficulty in using superconductors is, of course, the deep cryogenic temperatures at which they must operate. Because of the difficulties in working with liquid helium, the possibility of superconductors which can be operated in liquid nitrogen is thought to extend the number and range of applications of superconductivity. Critical temperatures of about 98 degrees Kelvin were demonstrated in a class of materials which are, in fact, ceramics. Quite a bit of public attention was attracted to these new materials. There is a difficulty with the ceramic superconducting materials which were developed to date. Current densities sufficient for use in large-scale applications have not been demonstrated. In order to be useful, superconductors must be capable of carrying substantial currents in the presence of large magnetic fields. The possible use of ceramic superconductors in magnetic bearings is investigated and discussed and requirements that must be achieved by superconductors operating at liquid nitrogen temperatures to make their use comparable with niobium-titanium superconductors operating at liquid helium temperatures are identified.

Kirtley, James L., Jr.↗
NASA NTRS1974

Transport dynamics of a high-power-density matrix-type hydrogen-oxygen fuel cell

Experimental transport dynamics tests were made on a space power fuel cell of current design. Various operating transients were introduced and transport-related response data were recorded with fluidic humidity sensing instruments. Also, sampled data techniques were developed for measuring the cathode-side electrolyte concentration during transient operation.

Prokopius, P. R.↗
NASA NTRS1999

Navigating Mars Global Surveyor Through the Martian Atmosphere: Aerobraking 2

The Mars Global Surveyor (MGS) spacecraft was successfully inserted into an elliptical orbit around Mars on 9/12/97, 01:53:49 UTC. This orbit was near polar (inclination=93.26 deg) with an orbital period of 44.993 hours and apoapsis and periapsis altitudes of 54,025.9 km and 262.9 km respectively. After 201 orbits and 196 days after Mars orbit insertion, the first phase of aerobraking (AB), called AB 1, has ended; after the AB 1 termination maneuver, the orbital period was 11.64 hours with apoapsis and periapsis altitudes of 17,870.3 and 170.7 Ian respectively. Thereafter, MGS was in a science phasing orbit (SPO) and acquired data from the science instruments from 3/28/98 to 9/22/98 (orbits 202 through 572). The second phase of aerobraking (AB2) began on 9/23/98 with the first descent into the atmosphere on P574 and ended with the aerobraking termination maneuver (ABX) on 2/4/99 on A 1284. Just prior to ABX, the apoapsis and periapsis altitudes were 456.5 km and 116.7 km respectively with an orbit period of 1.973 hours, a local mean solar time (LMST) at the descending node of 2 hours, 3.6 minutes and an inclination of 92.9 degrees. AB was responsible for circularization of the MGS orbit. However, two additional orbital conditions had to be satisfied simultaneously. These were a) complete AB2 when the LMST at the descending node was close to 2:00 am and b) the inclination was at 93.0 degrees. This paper describes the navigation of MGS throughout AB2; a companion paper describes the strategy and plan for aerobraking. Navigation challenges involved: a) the estimation of an atmospheric density model for every drag pass or periapsis-passage by analyzing doppler tracking data, b) the generation of a short-term, that is over one to several orbits, accurate atmospheric density predictions, c) maintaining the spacecraft's orbit within upper and lower bounds of atmospheric density or dynamic pressure during each periapsis-passage, and d) the prediction of accurate periapsis-passage times (Tp) over one to fifteen orbits. The density estimation and analysis procedure, evaluation of almost 700 atmospheric densities throughout AB2, the variation and accuracy of density predictions, the Tp prediction accuracy and how effectively we terminated AB2 are the basis of this paper and shall be presented in detail. A summary overview of AB2 is given.

Esposito, P.↗
NASA NTRS1982

Idealized dynamic grid computation of physical systems

The construction and utility of an idealized computational space for finite-difference computation of physical systems are considered. All computations are performed in tau space, which at any instant represents the dynamic grid of a subject physical system appropriately stretched into a uniform, orthogonal grid. A strain field model of physical system is described, including the sample computation of strain density fields. Dynamic grid generation using invariant-mapping is addressed, and the tau computational space is considered, including a grid dynamism constraint, a grid orthogonality constraint, and a grid smoothness constraint. The detailed tau computational space method is presented and illustrated with two sample problems.

Anyiwo, J. C.↗