Search NASA⌕ Search

SEARCH · Search NASA

Results for “ECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Three-flavour neutrino oscillations with MINOS and CHIPS

MINOS was a long-baseline neutrino oscillation experiment comprising two functionally identical detectors that observed Fermilab's NuMI neutrino beam in its low energy tune, at distances of 1 km and 735 km. When NuMI switched to a higher-power medium energy tune in 2012, the MINOS detectors continued to operate as MINOS+. Since its commissioning in 2003, the MINOS Far Detector has also been able to detect atmospheric neutrinos. Atmospheric neutrino oscillations are sensitive to the mass splitting m2 32 and mixing angle 23, and are also subject to the Matter E ect as the neutrinos pass through the Earth, which a ects neutrinos and antineutrinos di erently in a way that depends upon the mass hierarchy. This thesis presents the rst atmospheric neutrino analysis using data from the MINOS+ era, and the rst dedicated MINOS atmospheric neutrino analysis to use a full three- avour mixing model. It includes 10.79 kiloton years of new data and encompasses almost an entire period of the 11-year solar cycle, from 2003 to 2014. The CHIPS experiment aims to reduce construction costs of large water Cherenkov detectors to $200-300k per kiloton by submerging detectors with a lightweight structure in bodies of water on the surface of the Earth. Such detectors could reach masses of 1 Mton and would assist with the search for CP violation in the neutrino sector by measuring the rate of e appearance in a beam. A detailed reconstruction framework for CHIPS has been developed, incorporating a novel method based on the timing of PMT hits. This framework has been used to study the performance of di erent designs for a 10 kiloton CHIPS R&D module, and to demonstrate that e events can be identi ed in a sparsely-instrumented detector with a 6% coverage of 3" PMTs.

Perch, Andrew John↗

Electrical Capacitance Volume Tomography: Design and Applications

This article reports recent advances and progress in the field of electrical capacitance volume tomography (ECVT). ECVT, developed from the two-dimensional electrical capacitance tomography (ECT), is a promising non-intrusive imaging technology that can provide real-time three-dimensional images of the sensing domain. Images are reconstructed from capacitance measurements acquired by electrodes placed on the outside boundary of the testing vessel. In this article, a review of progress on capacitance sensor design and applications to multi-phase flows is presented. The sensor shape, electrode configuration, and the number of electrodes that comprise three key elements of three dimensional capacitance sensors are illustrated. The article also highlights applications of ECVT sensors on vessels of various sizes from 1 to 60 inches with complex geometries. Case studies are used to show the capability and validity of ECVT. The studies provide qualitative and quantitative real-time three-dimensional information of the measuring domain under study. Advantages of ECVT render it a favorable tool to be utilized for industrial applications and fundamental multi-phase flow research.

multi-phase flow↗

Coupled Mechanical-Electrochemical-Thermal Modeling for Accelerated Design of EV Batteries

This presentation provides an overview of the mechanical electrochemical-thermal (M-ECT) modeling efforts. The physical phenomena occurring in a battery are many and complex and operate at different scales (particle, electrodes, cell, and pack). A better understanding of the interplay between different physics occurring at different scales through modeling could provide insight to design improved batteries for electric vehicles. Work funded by the U.S. DOE has resulted in development of computer-aided engineering (CAE) tools to accelerate electrochemical and thermal design of batteries; mechanical modeling is under way. Three competitive CAE tools are now commercially available.

25 ENERGY STORAGE↗

Global Emissions of Terpenoid VOCs from Terrestrial Vegetation in the Last Millennium

We investigated the millennial variability of global BVOC emissions by using two independent numerical models: The Model of Emissions of Gases and Aerosols from Nature (MEGAN), for isoprene, monoterpene and sesquiterpene and Lund-Potsdam-Jena General Ecosystem Simulator (LPJ8 GUESS), for isoprene and monoterpenes. We found the millennial trends of global isoprene emissions to be mostly affected by land cover and atmospheric carbon dioxide changes, whereas monoterpene and sesquiterpene emission were dominated by temperature change. Isoprene emissions declined substantially in regions with large and rapid land cover change. In addition, isoprene emission sensitivity to drought proved to have signicant short term global effects. By the end of the past millennium MEGAN isoprene emissions were 634 TgC yr-1 (13% and 19% less than during during 1750-1850 and 1000- 15 1200, respectively) and LPJ-GUESS emissions were 323 TgC yr-1 (15% and 20% less than during 1750-1850 and 1000-1200, respectively). Monoterpene emissions were 89 TgC yr-1 (10% and 6% higher than during 1750-1850 and 1000-1200, respectively) in MEGAN, and 24 TgC yr-1 (2% higher and 5% 19 20 less than during 1750-1850 and 1000-1200, respectively) in LPJ-GUESS. MEGAN sesquiterpene emissions were 36 TgC yr-1 (10% and 4% higher than during1750-1850 and 1000-1200, respectively). Although both models capture similar We investigated the millennial variability of global BVOC emissions by using two independent numerical models: The Model of Emissions of Gases and Aerosols from Nature (MEGAN), for isoprene, monoterpene and sesquiterpene and Lund-Potsdam-Jena General Ecosystem Simulator (LPJ8GUESS), for isoprene and monoterpenes. We found the millennial trends ofglobal isoprene emissions to be mostly a*ected by land cover and atmospheric carbon dioxide changes, whereas monoterpene and sesquiterpene emission were dominated by temperature change. Isoprene emissions declined substantially in regions with large and rapid land cover change. In addition, isoprene emission sensitivity to drought proved to have signifcant short term global effects. By the end of the past millennium MEGAN isoprene emissions were 634 TgC yr-1 (13% and 19% less than during during 1750-1850 and 1000- 1200, respectively) and LPJ-GUESS emissions were 323 TgC yr-1 (15% and 16 17 20% less than during 1750-1850 and 1000-1200, respectively). Monoterpene emissions were 89 TgC yr-1 (10% and 6% higher than during 1750-1850 and 18 1000-1200, respectively) in MEGAN, and 24 TgC yr-1 (2% higher and 5% less than during 1750-1850 and 1000-1200, respectively) in LPJ-GUESS. MEGAN sesquiterpene emissions were 36 TgC yr-1 (10% and 4% higher than during1750-1850 and 1000-1200, respectively). Although both models capture similar emission trends, the magnitude of the emissions are different. This highlights the importance of building better constraints on VOC emissions from terrestrial vegetation.emission trends, the magnitude of the emissions are different. This highlights the importance of building better constraints on VOC emissions from terrestrial vegetation.

Acosta Navarro, J. C.↗

Observation of Quantum Anomalous Hall Effect and Exchange Interaction in Topological Insulator/Antiferromagnet Heterostructure

Integration of a quantum anomalous Hall insulator with a magnetically ordered material provides an additional degree of freedom through which the resulting exotic quantum states can be controlled. Here, an experimental observation is reported of the quantum anomalous Hall e?ect in a magnet-ically-doped topological insulator grown on the antiferromagnetic insulator Cr?O?. The exchange coupling between the two materials is investigated using ?eld-cooling-dependent magnetometry and polarized neutron re?ec-tometry. Both techniques reveal strong interfacial interaction between the antiferromagnetic order of the Cr?O? and the magnetic topological insulator, manifested as an exchange bias when the sample is ?eld-cooled under an out-of-plane magnetic ?eld, and an exchange spring-like magnetic depth pro?le when the system is magnetized within the ?lm plane. These results identify antiferromagnetic insulators as suitable candidates for the manipula-tion of magnetic and topological order in topological insulator ?lms.

Pan, Lei↗

Light weakly coupled axial forces: models, constraints, and projections

Here, we investigate the landscape of constraints on MeV-GeV scale, hidden U(1) forces with nonzero axial-vector couplings to Standard Model fermions. While the purely vector-coupled dark photon, which may arise from kinetic mixing, is a well-motivated scenario, several MeV-scale anomalies motivate a theory with axial couplings which can be UV-completed consistent with Standard Model gauge invariance. Moreover, existing constraints on dark photons depend on products of various combinations of axial and vector couplings, making it difficult to isolate the e ects of axial couplings for particular flavors of SM fermions. We present a representative renormalizable, UV-complete model of a dark photon with adjustable axial and vector couplings, discuss its general features, and show how some UV constraints may be relaxed in a model with nonrenormalizable Yukawa couplings at the expense of fine-tuning. We survey the existing parameter space and the projected reach of planned experiments, brie y commenting on the relevance of the allowed parameter space to low-energy anomalies in π 0 and 8 Be* decay.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Impedance Analysis of a Meander Coil with Rectangular Cross Section Above a Planar Conductor Using Vertex Description

Meander coils are widely used in eddy-current testing (ECT) and many other fields. Since the coil impedance is a key parameter that affects device performance, many scholars have studied impedance modeling. However, the modeling process of existing methods is cumbersome and complicated due to the complex structure of a meander coil. In this paper, a new method for the impedance calculation of a meander coil is proposed. First, a single rectangular coil is taken as an example, and its impedance expressions are deduced with the surface integral method. Then, a vertex description method for impedance calculation regarding meander coils is put forward by defining the position factor and angle factor. Finally, impedance calculations and verification experiments on a series of meander coils with different geometric dimensions are presented. The experimental results are in good agreement with the calculated ones. Therefore, the proposed method effectively calculates the impedance of meander coils and also simplifies the impedance calculation of coils with complex structures. Consequently, it is greatly significant for the coil design in terms of cost and design cycle reduction.

42 ENGINEERING↗

Eddy Current Probe Parameters Identification Using a Genetic Algorithm and Simultaneous Perturbation Stochastic Approximation

This study tries to identify the coil parameters using numerical methods. The eddy current testing (ECT) is used for evaluation of a crack with the aid of numerical simulations by utilizing the identification of these parameters. In this study, a comparison of the performance of the GA and SPSA algorithms to identify the parameter values of the coil sensors are presented. So, the optimization probe geometry is introduced in the simulation with Three-dimensional finite element simulations (FLUX finite element code) were conducted to obtain eddy current signals resulting from a crack in a plate made of aluminium. The simulation results are compared with experimental measurements for the defect present in a plate.

42 ENGINEERING↗

Synthesis, hypolipidemic and antifungal activity of tetrahydroberberrubine sulfonates

The paper describes the synthesis of new tetrahydroberberrubine derivatives containing polyfl uorophenyl- or alkylsulfonate groups at the O(9) position as well as those containing or not containing a bromine atom at the C(12) position. In a model of acute Triton-induced hyperlipidemia, tetrahydroberberrubine 9-O-(heptafluoro-4’-toluene)sulfonate was shown to reduce the cholesterol level by 23.5%, which is comparable with the eff ect of Simvastatin. At a concentration of 32 μg mL{sup −1}, tetrahydroberberrubine 9-O-pentafluorobenzenesulfonate inhibits the growth of the fungus Cryptococcus neoformans by 81.3±3.5%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Excitons in Potassium Bromide: A Study using Embedded Time-dependent Density Functional Theory and Equation-of-Motion Coupled Cluster Methods

We present a study of the electronic excitations in insulating materials using an embedded- cluster method. The excited states of the embedded cluster are studied systematically using time-dependent density functional theory (TDDFT) and high-level equation-of-motion coupled cluster (EOMCC) methods. In particular, we have used EOMCC models with singles and doubles (EOMCCSD) and two approaches which account for the e®ect of triply excited con¯gurations in non-iterative and iterative fashions. We present calculations of the lowest surface excitations of the well-studied potassium bromide (KBr) system and compare our results with experiment. The bulk-surface exciton shift is also calculated at the TDDFT level and compared with experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Propane Liquefaction with an Active Magnetic Regenerative Liquefier

Magnetic refrigeration is a cooling technique that uses the magnetocaloric e?ect (MCE). The active magnetic regenerator (AMR) cycle is a regenerative cycle that employs the MCE and consists of four steps: adiabatic magnetization with no heat transfer gas flow; heat transfer gas flow at constant high field; demagnetization with no heat transfer gas flow; and heat transfer gas flow at constant low field. The first heat transfer gas cold-to-hot flow step rejects heat from the magnetized regenerator to a hot sink and the second reverse heat transfer gas hot-to-cold flow step add heat from a cold source into the demagnetized regenerator. Our primary research and development objective is to use the MCE for more efficient liquefaction of much colder cryogens, to help identify problems of effective coupling of cold heat transfer gas of a single-stage reciprocating magnetic refrigerator to a process gas, we have used a single-stage active magnetic regenerative refrigerator (AMRR) with Gd refrigerant to liquefy pure propane gas at two different supply pressures. The high-purity propane was supplied from a small regulated lecture bottle at 295 K via a 1.6 mm o.d. stainless-steel tube into the helium-cooled coiled-fin tube heat exchanger at 49 psia or 27 psia, to liquefy propane at 262 K or 246 K, respectively. Propane liquefied until the small collection vessel and the coiled fin tube heat exchanger were filled at which the flow from the open lecture bottle stopped. The measured rate of liquefaction and the elapsed time for each case were measured and used to determine the volume of propane collected and the cooling power of the AMRR at the liquefaction temperatures. These cooling power results were compared to the cooling power results obtained from the curve of cool-down temperature vs. time data and agreement was excellent after the duty cycle of each cooling process was properly treated.

propane, liquefaction, active magnetic regenerator↗

Ultrafast charging of energy-dense lithium-ion batteries for urban air mobility

Urban air mobility (UAM) demands batteries with high energy density, long cycle life, and fast rechargeability. In this paper, we demonstrate an energy-dense lithium-ion battery (LiB) with ultralong cycle life under ultrafast charging. By using the asymmetric temperature modulation (ATM) method, i.e., charging at an elevated temperature and discharging around the ambient temperature, it is experimentally shown that the 209 Wh/kg LiB is charged to 88% state of charge (SOC) in ~5 min under UAM cycling while retaining 97.7% capacity after 1,000 cycles. Moreover, an experimentally validated electrochemical-thermal (ECT) model is developed to elucidate the fast charging process and the degradation mode of UAM batteries, quantitatively capturing lithium plating during fast charging. We find that the LiBs for UAM applications are most prone to lithium plating due to their higher initial SOC required as the reserve for safety; nevertheless, the ATM method is effective in minimizing or preventing lithium plating in the high SOC range of 30-90%. In addition to slowing down capacity fade, the ATM method also raises the usable capacity by 10%, which boosts the battery energy density and ensures the battery to perform full UAM cycles even at the end of life.

25 ENERGY STORAGE↗

Effect of thermal environments on fast charging Li-ion batteries

Battery thermal management systems (BTMSs) are expected to keep the battery temperature at a moderate level (~30 °C) to minimize the thermally exacerbated degradation. However, during fast charging, a strong cooling system is required to restrict the temperature rise of Li-ion batteries (LiBs), which significantly increases the cost and weight of battery packs, and induces a large temperature variation inside the battery. Here, in this work, we find that all these drawbacks could be relieved by allowing LiBs to charge at higher temperatures. Since the fast charging of a LiB only takes a tiny fraction of its lifetime, the aging rate is limited even at a charging temperature of 60 °C. Three types of thermal environments are proposed: kept constant at 30 °C, preheated to 60 °C, and adiabatic fast charging. With an experimentally validated electrochemical-thermal (ECT) coupled model, we explore the interplay between thermal management and the fast-charging performance. It is found that a gradually increasing temperature profile is the best option to balance the lithium plating and thermal management of the battery. Combining adiabatic fast charging with a preheating step, we can achieve minimal cooling need, perfect temperature uniformity within a battery, and fast-charging capability simultaneously.

25 ENERGY STORAGE↗

The investigation of order–disorder transition process of ZSM-5 induced by spark plasma sintering

Based on the amorphization of zeolites, an order–disorder transition method was used to prepare silica glass via Spark Plasma Sintering (SPS). In order to get a better understanding about the mechanism of amorphization induced by SPS, the intermediate products in this process were prepared and characterized by different characterization techniques. X-ray diffraction and High-energy synchrotron X-ray scattering show a gradual transformation from ordered crystal to glass. Local structural changes in glass network including Si–O bond length, O–Si–O bond angle, size of rings, coordination were detected by Infrared spectroscopy and {sup 29}Si magic-angle spinning nuclear magnetic resonance (NMR) spectroscopy. Topologically ordered, amorphous material with a different intermediate-range structure can be obtained by precise control of intermediate process which can be expected to optimize and design material. - Graphical abstract: Low-density, ordered zeolites collapse to the rigid amorphous glass through spark plasma sintering. The intermediate-range structure formed in the process of order–disorder transition may give rise to specific property. - Highlights: • Order–disorder transition process of ZSM-5 induced by spark plasma sintering was investigated using several methods including XRD, High-energy synchrotron X-ray scattering, SAXS, IR, NMR, ect. • Order–disorder transition induced by SPS was compared with TIA and PIA. • Three stages has been divided during the whole process. • The collapse temperature range which may give rise to intermediate-range structure has been located.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurements of charmonium production in p+p, p+Au, and Au+Au collisions at s NN = 200 GeV with the STAR experiment

Here, we present the first results from the STAR MTD of mid-rapidity charmonium measurements via the di-muon decay channel in p+p, p+Au, and Au+Au collisions at √S NN = 200 GeV at RHIC. The inclusive J/Ψ production cross section in p+p collisions can be described by the Non-Relativistic QCD (NRQCD) formalism coupled with the color glass condensate e ective theory (CGC) at low transverse momentum (p T ) and next-to-leading order NRQCD at high p T . The nuclear modification factor in p+Au collisions for inclusive J/Ψ is below unity at low p T and consistent with unity at high p T , which can be described by calculations including both nuclear PDF and nuclear absorption e ects. The double ratio of inclusive J/Ψ and Ψ(2S) production rates for 0 < p T < 10 GeV/c at mid-rapidity between p+p and p+Au collisions is measured to be 1.37 0.42 0.19. The nuclear modification factor in Au+Au collisions for inclusive J/Ψ shows significant J/Ψ suppression at high p T in central collisions and can be qualitatively described by transport models including dissociation and regeneration contributions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Non-destructive evaluation and machine learning methods for inspection of spent nuclear fuel canisters: A state-of-the-art review

Nuclear energy is among the cleanest and most efficient energy sources currently available. The operation of nuclear power plants (NPPs) produces large amounts of high-level radioactive waste known as spent nuclear fuel (SNF). Currently, large amounts of SNF is stored in dry cask storage systems (DCSSs) for extended interim storage until a permanent disposal solution becomes available. During the extended interim storage, the DCSS, particularly the SNF canisters, may degrade and abnormal conditions may occur. Therefore, non-destructive evaluation (NDE) and machine learning (ML) approaches are necessary for inspection of SNF canisters. This paper presents a state-of-the-art review of literature by summarizing recent progress made on the applications of NDE and ML for inspection of SNF canisters. Sixteen NDE methods are examined and compared: visual inspection, ultrasonic guided waves (UGWs), laser-based approaches, acoustic emission (AE), eddy current testing (ECT), non-invasive acoustic sensing, dynamic modal testing, cosmic ray muons tomography, neutron imaging, gamma rays detection, fiber optical sensors, through-wall communications, X-ray computed tomography (CT), vibrothermography, monoenergetic photon sources, and surface acoustic wave (SAW) sensors. The technology readiness level (TRL) for each method is assessed and compared. Recent publications on ML-enhanced visual inspection, AE, non-invasive acoustic sensing, dynamic modal testing, and neutron imaging for SNF canisters are summarized and future research needs are identified. In conclusion, this review article provides a convenient reference on the state-of-the-art applications of NDE and ML methods for inspection of SNF canisters.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Retrieving the energy-loss function from valence electron energy-loss spectrum: Separation of bulk-, surface-losses and Cherenkov radiation

With recent rapid advancement in electron microscopy instrumentation, in particular, bright electron sources and monochromators, valence electron energy-loss spectroscopy (VEELS) has become attractive for retrieving band structures, optical properties, dielectric functions and phonon information of materials. However, Cherenkov radiation and surface-loss contribution signi cantly alter ne structures of VEELS, even in simple semiconductors and insulators. This leads to the problem that dielectric function or bandgap structure of these materials cannot be determined correctly if these e ects are not removed. In this work we present a solution to this dilemma. We demonstrate that energy-loss function and real part of inverse complex dielectric function can be retrieved from raw data of VEELS. Based on the calculated example of Si, the limitation of our approach is discussed. We believe that our approach represents an improvement over previous procedures and has a broad prospect for applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗