Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRIC FIELD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Monitoring Local Electric Fields using Stark Shifts on Napthyl Nitrile-Functionalized Silicon Photoelectrodes

in this paper, we report spectroscopic measurements of the local electric field using vibrational Stark shifts of napthyl nitrile-functionalized silicon under electrochemical working conditions. The C$\equiv$N bond is particularly sensitive to applied electric fields and serves as a good probe for the local electric fields at the silicon–aqueous interface. Here, surface-enhanced Raman spectra (SERS) are collected at a silicon surface using a water immersion lens as a function of the reference potential in a three-terminal potentiostat. In deionized (DI) water and KCl solutions, the nitrile (i.e., C$\equiv$N) stretch downshifts by 4.7 and 8.6 cm –1 , respectively, under an applied potential of –1 V vs Ag/AgCl. Density functional theory (DFT) calculations of the napthyl nitrile complex carried out under various electric fields establish the Stark tuning rate to be 0.5622 cm–1/(MV cm –1 ). Based on this relation, electric fields of –8.4 and –15.2 MV/cm were obtained under negative applied potentials. These measurements report the electric field strength within the double (i.e., Helmholtz) layer, which is responsible for pulling positively charged ions (e.g., H + ) toward the surface in reduction reaction processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Enhancements of electric field and afterglow of non-equilibrium plasma by Pb(ZrxTi1−x)O3 ferroelectric electrode

Abstract Manipulating surface charge, electric field, and plasma afterglow in a non-equilibrium plasma is critical to control plasma-surface interaction for plasma catalysis and manufacturing. Here, we show enhancements of surface charge, electric field during breakdown, and afterglow by ferroelectric barrier discharge. The results show that the ferroelectrics manifest spontaneous electric polarization to increase the surface charge by two orders of magnitude compared to discharge with an alumina barrier. Time-resolved in-situ electric field measurements reveal that the fast polarization of ferroelectrics enhances the electric field during the breakdown in streamer discharge and doubles the electric field compared to the dielectric barrier discharge. Moreover, due to the existence of surface charge, the ferroelectric electrode extends the afterglow time and makes discharge sustained longer when alternating the external electric field polarity. The present results show that ferroelectric barrier discharge offers a promising technique to tune plasma properties for efficient plasma catalysis and electrified manufacturing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Electric Field Effects on Water and Ion Structure and Diffusion at the Orthoclase (001)–Water Interface

Understanding the electrochemical properties of mineral–water interfaces tends to rely upon electrical double layer (EDL) models, but these models are based on the assumption that electrostatic equilibrium is constantly maintained. In reality, interfacial reactions, ion diffusion, and their electrochemical signatures are based in nonequilibrium conditions of locally or globally imbalanced electrical fields where current EDL models have limited purview. In this work, we performed molecular dynamics (MD) simulations of the orthoclase (001) surface in contact with a 1 M NaCl aqueous solution under various electric fields, to explore the interplay between EDL structure and dynamics when perturbed by electric fields of different direction and strength, by confinement, and by different distributions of structural surface charge. The simulations showed that confinement between two opposing (001) surfaces led to the development of an induced field when the applied field was perpendicular to the surfaces and, as a result, to ionic diffusion coefficients that were independent of electric field strength. In contrast, when the applied field was parallel to the surfaces, confinement resulted in ionic diffusion coefficients that were more strongly dependent on the magnitude of the electric field than in bulk water. Differences in the density and distribution of aluminol groups on the two surfaces had a significant impact on how the interfacial structure and dynamics varied in the presence of an electric field. Notably, these differences resulted in an electro-osmotic flow with opposite directions at the two surfaces under parallel applied electric field. Overall, the MD simulations highlighted the importance of considering atomic-level structure and heterogeneities when developing models of the electrochemical properties of mineral–water interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Electric fields imbue enzyme reactivity by aligning active site fragment orbitals

It is broadly recognized that intramolecular electric fields, produced by the protein scaffold and acting on the active site, facilitate enzymatic catalysis. This field effect can be described by several theoretical models, each of which is intuitive to varying degrees. In this contribution, we show that a fundamental effect of electric fields is to generate electrostatic potentials that facilitate the energetic alignment of reactant frontier orbitals. We apply this model to demystify the impact of electric fields on high-valent iron–oxo heme proteins: catalases, peroxidases, and peroxygenases/monooxygenases. Specifically, we show that this model easily accounts for the observed field-induced changes to the spin distribution within peroxidase active sites and explains the transition between epoxidation and hydroxylation pathways seen in Cytochrome P450 active site models. Thus, for the intuitive interpretation of the chemical effect of the field, the strategy involves analyzing the response of the orbitals of active site fragments, and their energetic alignment. We note that the energy difference between fragment orbitals involved in charge redistribution acts as a measure for the chemical hardness/softness of the reactive complex. This measure, and its sensitivity to electric fields, offers a single parameter model from which to quantitatively assess the effects of electric fields on reactivity and selectivity. Thus, the model provides an additional perspective to describe electrostatic preorganization and offers ways for its manipulation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Electric field control of magnetism

Electric field control of magnetism is an extremely exciting area of research, from both a fundamental science and an applications perspective and has the potential to revolutionize the world of computing. To realize this will require numerous further innovations, both in the fundamental science arena as well as translating these scientific discoveries into real applications. Thus, this article will attempt to bridge the gap between condensed matter physics and the actual manifestations of the physical concepts into applications. We have attempted to paint a broad-stroke picture of the field, from the macroscale all the way down to the fundamentals of spin–orbit coupling that is a key enabler of the physics discussed. Here, we hope it will help spur more translational research within the broad materials physics community. Needless to say, this article is written on behalf of a large number of colleagues, collaborators and researchers in the field of complex oxides as well as current and former students and postdocs who continue to pursue cutting-edge research in this field.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Elucidating the Role of Electric Fields in Fe Oxidation via an Environmental Atom Probe

We quantify the effects of intensely applied electric fields on the Fe oxidation mechanism. The specimen are pristine Fe single crystals exposing a variety of surface structures identified by field ion microscopy. These crystals are simultaneously exposed to low pressures of pure oxygen gas, on the order of 10 −7 mbar, while applying intense electric fields on their surface of several tens of volts per nanometer. The local composition of the different surface structures is probed directly and in real time using an Environmental Atom Probe and successfully compared with first principles-based models. We found that rough Fe{244} and Fe{112} facets are more reactive toward oxygen than compact Fe{024} and Fe{011} facets. Results demonstrate that the influence of an electric field on the oxidation kinetics depends on the timescales that are involved as the system evolves toward equilibrium. The initial oxidation kinetics show that strong increases in electric fields facilitate the formation of an oxide. However, as one approaches equilibrium, high field values mitigate this formation. Ultimately, this study elucidates how high externally applied electric fields can be used to dynamically exploit reaction dynamics at the nanoscale towards desired products in a catalytic reaction at mild reaction conditions.

09 BIOMASS FUELS↗
DOE OSTI2021

Dielectric screening and electric field control of ferromagnetism at the CaMnO 3 /CaRuO 3 interface

Control of magnetism by an applied electric field is a desirable technique for the functionalization of magnetic materials. Motivated by recent experiments, we study the electric field control of the interfacial magnetism of CaRuO 3 /CaMnO 3 (CRO/CMO) (001), a prototype interface between a non-magnetic metal and an antiferromagnetic insulator. Even without the electric field, the interfacial CMO layer acquires a ferromagnetic moment due to a spin-canted state, caused by the Anderson-Hasegawa double exchange (DEX) between the Mn moments and the leaked electrons from the CRO side. An electric field would alter the carrier density at the interface, leading to the possibility of controlling the magnetism, since DEX is sensitive to the carrier density. We study this effect quantitatively using density-functional calculations in the slab geometry. We find a text-book like dielectric screening of the electric field, which introduces polarization charges at the interfaces and the surfaces. The extra charge at the interface enhances the ferromagnetism via the DEX interaction, while away from the interface the original AFM state of the Mn layers remains unchanged. The effect could have potential application in spintronics devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Quantifying the Impact of Electric Fields on the Local Structure and Migration of Potassium Ions at the Orthoclase (001) Surface

Developing an understanding of the response of mineral/water interfaces to applied electric fields is central to detecting and interpreting signatures of interfacial processes in the subsurface. Here we focus density functional theory calculations on understanding K + cation binding and diffusion across the (001) surface of orthoclase feldspar under various applied electric fields with and without surface hydration. The calculations reveal how water ligands labilize surface K + cations for diffusion while also increasing their sensitivity to electric field effects on the binding energy at different surface sites. The calculations also show how the direction and strength of the electric field systematically affect surface cation mobility, sorption, and hydration behavior. Specifically, electric fields directed toward the surface increase the potassium binding energies, facilitate K + diffusion across multiple binding sites, and increase the propensity of surface K + ions to lose their hydration shells. Furthermore, the findings help fill a major knowledge gap into the impact of electric fields on mineral/water interface structure and dynamics more generally, featuring in this case a commonly found type of feldspar involved in a multitude of atmospheric and geochemical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Elucidating the Role of Electric Fields in Fe Oxidation via an Environmental Atom Probe

Abstract We quantify the effects of intensely applied electric fields on the Fe oxidation mechanism. The specimen are pristine Fe single crystals exposing a variety of surface structures identified by field ion microscopy. These crystals are simultaneously exposed to low pressures of pure oxygen gas, on the order of 10 −7 mbar, while applying intense electric fields on their surface of several tens of volts per nanometer. The local composition of the different surface structures is probed directly and in real time using an Environmental Atom Probe and successfully compared with first principles‐based models. We found that rough Fe{244} and Fe{112} facets are more reactive toward oxygen than compact Fe{024} and Fe{011} facets. Results demonstrate that the influence of an electric field on the oxidation kinetics depends on the timescales that are involved as the system evolves toward equilibrium. The initial oxidation kinetics show that strong increases in electric fields facilitate the formation of an oxide. However, as one approaches equilibrium, high field values mitigate this formation. Ultimately, this study elucidates how high externally applied electric fields can be used to dynamically exploit reaction dynamics at the nanoscale towards desired products in a catalytic reaction at mild reaction conditions.

Lambeets, Sten V. [Physical and Computational Scie↗
DOE OSTI2022

Generation of a Strong Parallel Electric Field and Embedded Electron Jet in the Exhaust of Moderate Guide Field Reconnection

Abstract Magnetospheric Multiscale observed an extended current layer concurrent with a strong parallel electric field. The current layer is embedded in the reconnection exhaust and is consistent with an extended magnetized jet expected in roughly symmetric moderate guide field reconnection. The strong parallel electric field observed at the jet balances a strong gradient in the parallel electron pressure caused by a transition between magnetized electrons with T e ‖ > T e ⊥ on one side of the jet and demagnetized, roughly isotropic electrons across the thin current layer. Simulation results show how this transition can occur and how the associated electron pressure gradients in Ohm's law balance the parallel electric field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Pulsed Electric Field Processing of Apples

Pulsed electric field (PEF) processing is a nonthermal technology that has the potential to improve the efficiency of apple processing, particularly for firm cultivars that are growing in popularity. This study evaluated the effects of PEF pretreatment on the processability and product quality of Cosmic Crisp apples, a modern cultivar known for its firmness. Apples were treated with PEF and assessed for tissue softening, mechanical energy requirements, particle size reduction, browning tendencies, and juice yield. PEF treatment significantly softened the apple tissue, as demonstrated by reduced compression forces in Instron testing, and this softening translated to decreased grinding energy during applesauce production. There were no changes to the particle size distribution of the resulting applesauce. PEF treatment also altered browning behavior and produced higher juice yields following mechanical disruption, suggesting enhanced membrane permeability and mass transfer. Together, these results show that PEF pretreatment can reduce mechanical energy demands and increase extractability without reducing product quality in firm apple varieties. These outcomes highlight the potential of PEF to increase the value recovered from processing-grade apples and to support more efficient and sustainable apple processing operations.

32 - ENERGY CONSERVATION, CONSUMPTION, AND UTILIZA↗
DOE OSTI2023

Investigating Electric Field and Light Induced Degradation in Perovskite Solar Cells through Nanometer-Scale Potential Imaging

Electric field and light induced degradations in perovskite solar cells were evaluated through nanometer-scale potential imaging across the device by using in-situ Kelvin probe force microscopy (KPFM). We derived the electric field profile from potential profiles at different bias voltages to evaluate the locations and quality of junctions across the device. We found relative changes in electric field peak intensity at the HTL/perovskite and perovskite/ETL interfaces upon stressing devices separately under voltage or light. KPFM results during 12-hour stress/rest cycling under electrical bias show both reversible and irreversible changes in the device's interfacial fields. We also observed change in the electric field profile between control and degraded devices after 100 hours of stress/rest cycling under light. Our results demonstrate how nanometer-scale potential imaging can be used to understand the impacts of external electric fields and light soaking on both irreversible degradation and reversible metastability in perovskite solar cells.

Kelvin probe force microscopy↗
DOE OSTI2025

Electric Field’s Dueling Effects through Dehydration and Ion Separation in Driving NaCl Nucleation at Charged Nanoconfined Interfaces

Investigating nucleation in charged nanoconfined environments under electric fields is crucial for many scientific and engineering applications. Here we study the nucleation of NaCl from aqueous solution near charged surfaces using machine-learning-augmented enhanced sampling molecular dynamics simulations. Our simulations successfully drive phase transitions between the liquid and solid phases of NaCl. The solid phase is stabilized under electric fields, particularly at an intermediate surface charge density. We examine which physical characteristics drive the nucleation of NaCl from aqueous solutions and find that the removal of solvent water from Cl– at the solid precursor surface plays a more critical role than the accumulation of ions. Our simulations reveal the competing effects of electric fields on nucleation processes: they facilitate the removal of water, promoting nucleation, but also promote the separation of ion pairs, thereby hindering nucleation. Here, this work provides a framework for studying nucleation processes in nanoconfined environments under electric fields and provides physical insights for the design of electrochemistry materials.

Electric fields↗
DOE OSTI2026

Electric-field enhanced water-dissociation catalysis on oxide surfaces

Ion-transfer reactions in the presence of electric fields are ubiquitous in (bio/electro)chemical systems and catalysis, yet the impact of the electric field is poorly understood. Here, we use bipolar membranes (BPMs) to isolate electric-field-driven non-faradaic water dissociation (WD: H 2 O → H + + OH − ) on catalytic surfaces. We find the catalyst layer's ionic properties dictate both the transport and kinetic processes within the BPM. The role of these properties are explored via a series of membrane architectures, and catalyst poisoning experiments, and the corresponding current–voltage and impedance responses. Arrhenius analyses show that an acidic graphene-oxide (GO x ) catalyst layer gives rise to low interfacial H 2 O entropy in the heterojunction, illustrated via a >100 fold increase in the Arrhenius prefactor relative to baseline TiO 2 measurements. Furthermore, ∼50% of the applied driving force goes towards reducing the apparent enthalpic activation barrier in the case of GO x , while other metal-oxide catalysts have enthalpic barriers independent of driving force. This analysis demonstrates a new mechanistic understanding of WD, where local electric fields augment enthalpic transition-state barriers, and the local ionic environment facilitates field-driven ion transfer. Ultimately, these results present a new design space for designing ion-transfer catalytic processes, and ionic heterojunctions more broadly.

Nathan Stovall, T. [University of California, Berk↗
DOE OSTI2024

High-angular-momentum Rydberg states in a room-temperature vapor cell for dc electric-field sensing

We prepare and analyze Rydberg states with orbital quantum numbers ℓ ≤ 6 using three-optical-photon electromagnetically induced transparency (EIT) and radio frequency (rf) dressing, and employ the high- ℓ states in electric-field sensing. Rubidium-85 atoms in a room-temperature vapor cell are first promoted into the 25 F 5 / 2 state via Rydberg-EIT with three infrared laser beams. Two rf dressing fields then (near-)resonantly couple the 25 F , 25 H ( ℓ = 5 ) , and 25 I ( ℓ = 6 ) Rydberg states. The dependence of the rf-dressed Rydberg-state level structure on rf powers, rf and laser frequencies is characterized using EIT. Furthermore, we discuss the principles of dc-electric-field sensing using high- ℓ Rydberg states and experimentally demonstrate the method using test electric fields of ≲ 50 V/m induced via photo-illumination of the vapor-cell wall. We measure the highly nonlinear dependence of the dc-electric-field strength on the power of the photo-illumination laser. Numerical calculations, which reproduce our experimental observations well, elucidate the underlying physics. Our paper is relevant to high-precision spectroscopy of high- ℓ Rydberg states, Rydberg-atom-based electric-field sensing, and plasma electric-field diagnostics. Published by the American Physical Society 2024

Duspayev, Alisher (ORCID:0000000153225762)↗
DOE OSTI2022

A two-directional vibrational probe reveals different electric field orientations in solution and an enzyme active site

We report the catalytic power of an electric field depends on its magnitude and orientation with respect to the reactive chemical species. Understanding and designing new catalysts for electrostatic catalysis thus requires methods to measure the electric field orientation and magnitude at the molecular scale. We demonstrate that electric field orientations can be extracted using a two-directional vibrational probe by exploiting the vibrational Stark effect of both the C=O and C–D stretches of a deuterated aldehyde. Combining spectroscopy with molecular dynamics and electronic structure partitioning methods, we demonstrate that, despite distinct polarities, solvents act similarly in their preference for electrostatically stabilizing large bond dipoles at the expense of destabilizing small ones. In contrast, we find that for an active-site aldehyde inhibitor of liver alcohol dehydrogenase, the electric field orientation deviates markedly from that found in solvents, which provides direct evidence for the fundamental difference between the electrostatic environment of solvents and that of a preorganized enzyme active site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electric Field Measurements at the Surface of a Piezoelectric Transformer for Plasma Jet Formation using the Plasma Research Facility at Sandia National Laboratory (Final Report)

The overall goal of this research is to understand how low-temperature non-equilibrium plasmas form directly off the surface of piezoelectric crystals. Specifically, this project aims to temporally and spatially resolve how the electric field evolves on and near the surface of a piezoelectric transformer (PT) at conditions that produce an atmospheric-pressure air plasma jet emanating from the corner of the PT. In this work, we used the Plasma Research Facility (PRF) at Sandia National Laboratory to conduct temporally- and spatially-resolved electric field induced second harmonic (E-FISH) measurements of the electric field at and near the surface of a piezoelectric transformer, providing a fundamental understanding of how piezoelectric crystals can be used for plasma generation. We carried out two Objectives: Objective 1 – The first objective was to measure the temporal and spatial evolution of the electric field along the surfaces approaching the corner of a rectangular PT just below conditions that lead to plasma jet formation. Such a measurement can be used to explain when and where the electric field peaks, leading to plasma formation; Objective 2 – The second objective was to measure the temporal and spatial evolution of the electric field along the surfaces approaching the corner of a rectangular PT just at conditions of plasma jet formation. This, in principle, gives a more accurate determination of how the electric field leads to plasma formation but is more difficult due to the relatively stochastic plasma jet behavior of a PT. This work was complemented by an award from the Sandia PRF, and we worked with Dr. Edward Barnat at the Sandia PRF to carry out these objectives.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Electric Field Control of Magnetic Skyrmion Helicity in a Centrosymmetric 2D van der Waals Magnet

Two-dimensional van der Waals magnets hosting topological magnetic textures, such as skyrmions, show promise for spintronics and quantum computing. Electrical control of these topological spin textures is crucial for enhancing operational performance and functionality. Here, using electron microscopy combined with in situ electric and magnetic biasing, we show that the skyrmion helicity in insulating Cr 2 Ge 2 Te 6 can be controlled by the direction of the external electric field applied during the field cooling process. The electric field-tuned helicity remains stable at low temperature, even amid variations in magnetic and electric fields. Our theoretical investigation reveals that nonzero Dzyaloshinskii-Moriya interactions between nearest neighbors, induced by the electric field, change their sign upon reversing the electric field direction, thereby facilitating helicity selection. The electrical control of magnetic helicity demonstrated in this study can be extended to other centrosymmetric skyrmion-hosting magnets, paving the way for future device designs in topological spintronics and quantum computing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗