Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRIC POTENTIAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Electrostatic Charging of the Pathfinder Rover

The Mars Pathfinder mission will send a lander and a rover to the martian surface. Because of the extremely dry conditions on Mars, electrostatic charging of the rover is expected to occur as it moves about. Charge accumulation may result in high electrical potentials and discharge through the martian atmosphere. Such discharge could interfere with the operation of electrical elements on the rover. A strategy was sought to mitigate this charge accumulation as a precautionary measure. Ground tests were performed to demonstrate charging in laboratory conditions simulating the surface conditions expected at Mars. Tests showed that a rover wheel, driven at typical rover speeds, will accumulate electrical charge and develop significant electrical potentials (average observed, 110 volts). Measurements were made of wheel electrical potential, and wheel capacitance. From these quantities, the amount of absolute charge was estimated. An engineering solution was developed and recommended to mitigate charge accumulation. That solution has been implemented on the actual rover.

Siebert, Mark W.↗
NASA NTRS1979

A quasi-static model of global atmospheric electricity. I - The lower atmosphere

A quasi-steady model of global lower atmospheric electricity is presented. The model considers thunderstorms as dipole electric generators that can be randomly distributed in various regions and that are the only source of atmospheric electricity and includes the effects of orography and electrical coupling along geomagnetic field lines in the ionosphere and magnetosphere. The model is used to calculate the global distribution of electric potential and current for model conductivities and assumed spatial distributions of thunderstorms. Results indicate that large positive electric potentials are generated over thunderstorms and penetrate to ionospheric heights and into the conjugate hemisphere along magnetic field lines. The perturbation of the calculated electric potential and current distributions during solar flares and subsequent Forbush decreases is discussed, and future measurements of atmospheric electrical parameters and modifications of the model which would improve the agreement between calculations and measurements are suggested.

Hays, P. B.↗
NASA NTRS1979

Dust-magnetospheric interactions

The important processes controlling the electrical potentials of dust grains in planetary magnetospheres are considered, and the quasi-equilibrium electric potentials acquired by them in the different plasma and radiative environments encountered are evaluated. The orbital dynamics of such charged grains is discussed, and their interaction with satellites within the planetary magnetospheres is considered. The possibility of magneto-gravitational capture of these gains by magnetospheres, to form dust rings around the planets, is also discussed. Finally, the possible break-up of grains charged to large electrical potentials and its consequences are briefly addressed.

Mendis, D. A.↗
NASA NTRS1996

Formation of the Electric Double Layer and its Effects on Moving Bodies in a Space Plasma Environment

In this paper we solve the self-consistent Vlasov and Poisson equations by a numerical method to determine the local distribution function of the ion and the electron, within a thin layer near the moving body, respectively. Using these ion and electron distributions, the number density for the ions and electrons are determined, such that, the electric potential is obtained within this thin layer (i.e., measured by Debye length). Numerical results are presented for temporal evolution of the electron and ion density and its corresponding electric potential within the layer which shows the formation of electric double layer and its structures. From these numerical results, we are able to determine the maximum conditions of the electric potential, it may create satellite anomaly.

Yang, Qianli↗
NASA NTRS1994

Non-volatile, solid state bistable electrical switch

A bistable switching element is made of a material whose electrical resistance reversibly decreases in response to intercalation by positive ions. Flow of positive ions between the bistable switching element and a positive ion source is controlled by means of an electrical potential applied across a thermal switching element. The material of the thermal switching element generates heat in response to electrical current flow therethrough, which in turn causes the material to undergo a thermal phase transition from a high electrical resistance state to a low electrical resistance state as the temperature increases above a predetermined value. Application of the electrical potential in one direction renders the thermal switching element conductive to pass electron current out of the ion source. This causes positive ions to flow from the source into the bistable switching element and intercalate the same to produce a non-volatile, low resistance logic state. Application of the electrical potential in the opposite direction causes reverse current flow which de-intercalates the bistable logic switching element and produces a high resistance logic state.

Williams, Roger M.↗
NASA NTRS2023

Quantifying the Energy Budget in the Solar Wind from 13.3 to 100 Solar Radii

A variety of energy sources, ranging from dynamic processes, such as magnetic reconnection and waves, to quasi steady terms, such as plasma pressure, may contribute to the acceleration of the solar wind. We utilize a combination of charged particle and magnetic field observations from the Parker Solar Probe (PSP) to attempt to quantify the steady-state contribution of the proton pressure, the electric potential, and the wave energy to the solar wind proton acceleration observed by PSP between 13.3 and ∼100 solar radii (R☉). The proton pressure provides a natural kinematic driver of the outflow. The ambipolar electric potential acts to couple the electron pressure to the protons, providing another definite proton acceleration term. Fluctuations and waves, while inherently dynamic, can act as an additional effective steady-state pressure term. To analyze the contributions of these terms, we utilize radial binning of single-point PSP measurements, as well as repeated crossings of the same stream at different distances on individual PSP orbits (i.e., fast radial scans). In agreement with previous work, we find that the electric potential contains sufficient energy to fully explain the acceleration of the slower wind streams. On the other hand, we find that the wave pressure plays an increasingly important role in the faster wind streams. The combination of these terms can explain the continuing acceleration of both slow and fast wind streams beyond 13.3 R☉.

J S Halekas↗
NASA NTRS2018

Computational Investigation of the Near-Field Plasma Plume in Ion-Ion Propulsion

A two-fluid numerical model of plasma flows was developed to investigate the plume of an ion-ion propulsion system. The densities of positive and negative ions, and the associated values of net charge, electric field, and electric potential were calculated as a function of time throughout the domain. The computational domain was chosen to be large enough (25 thruster diameters downstream of the exit plane) to allow for examining the neutralization of the plume. The resulting plasma electric potential and charge neutrality at the downstream end of the domain are shown and they indicate that it is possible to alternatively accelerate oppositely charged ions without the need for an electron-emitting neutralizer and without facing any electric potential hills that could cause stagnation. However, compared to existing literature on ion-ion plasma thrusters, the results from this simulation predict a longer length-scale for voltage decay.

Sankaran, K.↗
NASA NTRS1994

Satellite measurements through the center of a substorm surge

Measurements have been made of electric and magnetic fields, plasma drifts, and electron precipatation within a surge at the westward, leading edge of the auroral 'bulge' at the peak of the substorm expansion phase. The trajectroy of the Dynamics Explorer 2 (DE 2) satellite over the auroral emissions is determined from nearly simultaneous observations with the imager on the DE 1 satellite at a higher altitude. The electric field and plasma drift measurements have enabled us to deduce the basic configuration of the ionospheric electric potential, or plasma convection, around the surge. The electric potential shows that the bulge is associated with a protrusion of the dawn convection cell into the dusk cell, poleward of the 'Harang discontinity.' This protrusion conains a westward electric field that strongly enhances the westard electrojet current by the creation of a "Cowling channel.' This westward electric field, and the associated Cowling current, appear to terminate within the surge, which contains an intense, upward field-aligned current. The magneitc field measurements show that the region containing this field-aligned current is shaped more like a cylinger rather than a long sheet. The total is found to exceed one-half million amperes.

Weimer, D. R.↗
NASA NTRS1960

Ignition of a Combustible Atmosphere by Incandescent Carbon Wear Particles

A study was made to determine whether carbon wear particles from carbon elements in sliding contact with a metal surface were sufficiently hot to cause ignition of a combustible atmosphere. In some machinery, electric potential differences and currents may appear at the carbon-metal interface. For this reason the effect of these voltages and currents on the ability of carbon wear particles to cause ignition was evaluated. The test specimens used in the investigation were carbon vanes taken from a fuel pump and flat 21-inch-diameter 2 metal disks (440-C stainless steel) representing the pump housing. During each experiment a vane was loaded against a disk with a 0.5-pound force, and the disk was rotated to give a surface speed of 3140 feet per minute. The chamber of the apparatus that housed the vane and the disk was filled with a combustible mixture of air and propane. Various voltages and amperages were applied across the vane-disk interface. Experiments were conducted at temperatures of 75, 350, 400, and 450 F. Fires were produced by incandescent carbon wear particles obtained at conditions of electric potential as low as 106 volts and 0.3 ampere at 400 F. Ignitions were obtained only with carbon wear particles produced with an electric potential across the carbon-vane-disk interface. No ignitions were obtained with carbon wear particles produced in the absence of this potential; also, the potential difference produced no ignitions in the absence of carbon wear particles. A film supplement showing ignition by incandescent wear particles is available.

Buckley, Donald H.↗
NASA NTRS2004

Improved Ionospheric Electrodynamic Models and Application to Calculating Joule Heating Rates

Improved techniques have been developed for empirical modeling of the high-latitude electric potentials and magnetic field aligned currents (FAC) as a function of the solar wind parameters. The FAC model is constructed using scalar magnetic Euler potentials, and functions as a twin to the electric potential model. The improved models have more accurate field values as well as more accurate boundary locations. Non-linear saturation effects in the solar wind-magnetosphere coupling are also better reproduced. The models are constructed using a hybrid technique, which has spherical harmonic functions only within a small area at the pole. At lower latitudes the potentials are constructed from multiple Fourier series functions of longitude, at discrete latitudinal steps. It is shown that the two models can be used together in order to calculate the total Poynting flux and Joule heating in the ionosphere. An additional model of the ionospheric conductivity is not required in order to obtain the ionospheric currents and Joule heating, as the conductivity variations as a function of the solar inclination are implicitly contained within the FAC model's data. The models outputs are shown for various input conditions, as well as compared with satellite measurements. The calculations of the total Joule heating are compared with results obtained by the inversion of ground-based magnetometer measurements. Like their predecessors, these empirical models should continue to be a useful research and forecast tools.

Weimer, D. R.↗
NASA NTRS1984

Thermal-mechanical fatigue crack growth in Inconel X-750

Thermal-mechanical fatigue crack growth (TMFCG) was studied in a gamma-gamma' nickel base superalloy Inconel X-750 under controlled load amplitude in the temperature range from 300 to 650 C. In-phase (T sub max at sigma sub max), out-of-phase (T sub min at sigma sub max), and isothermal tests at 650 C were performed on single-edge notch bars under fully reversed cyclic conditions. A dc electrical potential method was used to measure crack length. The electrical potential response obtained for each cycle of a given wave form and R value yields information on crack closure and crack extension per cycle. The macroscopic crack growth rates are reported as a function of delta k and the relative magnitude of the TMFCG are discussed in the light of the potential drop information and of the fractographic observations.

Marchand, N.↗
NASA NTRS1985

Thermal-mechanical fatigue crack growth in Inconel X-750

Thermal-mechanical fatigue crack growth (TMFCG) was studied in a 'gamma-gamma' nickel base superalloy Inconel X-750 under controlled load amplitude in the temperature range from 300 to 650 C. In-phase (T sub max at sigma sub max), out-of-phase (T sub min at sigma sub max), and isothermal tests at 650 C were performed on single-edge notch bars under fully reversed cyclic conditions. A dc electrical potential method was used to measure crack length. The electrical potential response obtained for each cycle of a given wave form and R value yields information on crack closure and crack extension per cycle. The macroscopic crack growth rates are reported as a function of delta k and the relative magnitude of the TMFCG are discussed in the light of the potential drop information and of the fractographic observations.

Marchand, N.↗
NASA NTRS1989

Efficiency arcjet thruster with controlled arc startup and steady state attachment

An improved efficiency arcjet thruster has a constrictor and electrically-conductive nozzle anode defining an arc chamber, and an electrically-conductive rod having a tip spaced upstream from the constrictor and defining a cathode spaced from the anode by a gap generally coextensive with the arc chamber. An electrical potential is applied to the anode and cathode to generate an electrical arc in the arc chamber from the cathode to anode. Catalytically decomposed hydrazine is supplied to the arc chamber with generation of the arc so as to produce thermal heating and expansion thereof through the nozzle. The constrictor can have a electrically insulative portion disposed between the cathode tip and the nozzle anode, and an electrically-conductive anode extension disposed along the insulative portion so as to define an auxiliary gap with the cathode tip substantially smaller than the gap defined between the cathode and nozzle anode for facilitating startup of arc generation. The constrictor can also include an electrically-conductive electrode with a variable electrical potential to vary the shape of the arc generated in the arc chamber. Also, the cathode is mounted for axial movement such that the gap between its tip and the nozzle anode can be varied to facilitate a generally nonerosive generation of the electrical arc at startup and reliable steady state operation. Further, the arc chamber can have a nonparallel subsonic-to-supersonic transition configuration, or alternatively solely a nonparallel supersonic configuration, for improved arc attachment.

Smith, William W.↗
NASA NTRS1988

High voltage gas isolator

An isolator is provided which has an inlet at ground electrical potential which receives gas, and which has an outlet at a high electrical potential through which gas is discharged, the isolator being compactly and simply constructed while providing a long narrow path that minimizes the possibility of electrical breakdown through the gas. The isolator includes a first element forming a cylindrical core and a cup-shaped second element forming a sleeve portion that closely receives the core. The core has a helical groove on its outside to form a passage between the groove and the inner walls of the sleeve. The core also has a vertical hole extending to the bottom of the core and a radial groove in the bottom of the core that extends between the hole and the bottom of the helical groove.

Brophy, John R.↗